drm/i915/selftest: use igt_vma_move_to_active_unlocked if possible

Helper replaces common sequence of calls.

Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrt

drm/i915/selftest: use igt_vma_move_to_active_unlocked if possible

Helper replaces common sequence of calls.

Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221213121951.1515023-2-andrzej.hajda@intel.com

show more ...

drm/i915: Wrap all access to i915_vma.node.start|size

We already wrap i915_vma.node.start for use with the GGTT, as there we
can perform additional sanity checks that the node belongs to the GGTT
an

drm/i915: Wrap all access to i915_vma.node.start|size

We already wrap i915_vma.node.start for use with the GGTT, as there we
can perform additional sanity checks that the node belongs to the GGTT
and fits within the 32b registers. In the next couple of patches, we
will introduce guard pages around the objects _inside_ the drm_mm_node
allocation. That is we will offset the vma->pages so that the first page
is at drm_mm_node.start + vma->guard (not 0 as is currently the case).
All users must then not use i915_vma.node.start directly, but compute
the guard offset, thus all users are converted to use a
i915_vma_offset() wrapper.

The notable exceptions are the selftests that are testing exact
behaviour of i915_vma_pin/i915_vma_insert.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com>
Co-developed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221130235805.221010-3-andi.shyti@linux.intel.com

show more ...

drm/i915: call i915_request_await_object from _i915_vma_move_to_active

Since almost all calls to i915_vma_move_to_active are prepended with
i915_request_await_object, let's call the latter from
_i91

drm/i915: call i915_request_await_object from _i915_vma_move_to_active

Since almost all calls to i915_vma_move_to_active are prepended with
i915_request_await_object, let's call the latter from
_i915_vma_move_to_active by default and add flag allowing bypassing it.
Adjust all callers accordingly.
The patch should not introduce functional changes.

Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221019215906.295296-2-andrzej.hajda@intel.com

show more ...

drm/i915: Partial abandonment of legacy DRM logging macros

Convert some usages of legacy DRM logging macros into versions which tell
us on which device have the events occurred.

v2:
* Don't have s

drm/i915: Partial abandonment of legacy DRM logging macros

Convert some usages of legacy DRM logging macros into versions which tell
us on which device have the events occurred.

v2:
* Don't have struct drm_device as local. (Jani, Ville)

v3:
* Store gt, not i915, in workaround list. (John)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221109104633.2579245-1-tvrtko.ursulin@linux.intel.com

show more ...

drm/i915: Define multicast registers as a new type

Rather than treating multicast registers as 'i915_reg_t' let's define
them as a completely new type. This will allow the compiler to help us
make

drm/i915: Define multicast registers as a new type

Rather than treating multicast registers as 'i915_reg_t' let's define
them as a completely new type. This will allow the compiler to help us
make sure we're using multicast-aware functions to operate on multicast
registers.

This plan does break down a bit in places where we're just maintaining
heterogeneous lists of registers (e.g., various MMIO whitelists used by
perf, GVT, etc.) rather than performing reads/writes. We only really
care about the offset in those cases, so for now we can "cast" the
registers as non-MCR, leaving us with a list of i915_reg_t's, but we may
want to look for better ways to store mixed collections of i915_reg_t
and i915_mcr_reg_t in the future.

v2:
- Add TLB invalidation registers
v3:
- Make type checking of i915_mmio_reg_offset() stricter. It will
accept either i915_reg_t or i915_mcr_reg_t, but will now raise a
compile error if any other type is passed, even if that type contains
a 'reg' field. (Jani)
- Drop a ton of GVT changes; allowing i915_mmio_reg_offset() to take
either an i915_reg_t or an i915_mcr_reg_t means that the huge lists
of MMIO_D*() macros used in GVT will continue to work without
modification. We need only make changes to structures that have an
explicit i915_reg_t in them now.

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221014230239.1023689-13-matthew.d.roper@intel.com

show more ...

drm/i915: split out i915_gem_internal.h from i915_drv.h

We already have the i915_gem_internal.c file.

Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: split out i915_gem_internal.h from i915_drv.h

We already have the i915_gem_internal.c file.

Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6715d1f3232c445990630bb3aac00f279f516fee.1644507885.git.jani.nikula@intel.com

show more ...

drm/i915/gt: Use to_gt() helper

Use to_gt() helper consistently throughout the codebase.
Pure mechanical s/i915->gt/to_gt(i915). No functional changes.

Signed-off-by: Michał Winiarski <michal.winia

drm/i915/gt: Use to_gt() helper

Use to_gt() helper consistently throughout the codebase.
Pure mechanical s/i915->gt/to_gt(i915). No functional changes.

Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211214193346.21231-5-andi.shyti@linux.intel.com

show more ...

drm/i915: Make wa list per-gt

Support for multiple GT's within a single i915 device will be arriving
soon. Since each GT may have its own fusing and require different
workarounds, we need to make t

drm/i915: Make wa list per-gt

Support for multiple GT's within a single i915 device will be arriving
soon. Since each GT may have its own fusing and require different
workarounds, we need to make the GT workaround functions and multicast
steering setup per-gt.

Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210917170845.836358-1-matthew.d.roper@intel.com

show more ...

drm/i915/selftest: Fix hangcheck self test for GuC submission

When GuC submission is enabled, the GuC controls engine resets. Rather
than explicitly triggering a reset, the driver must submit a hang

drm/i915/selftest: Fix hangcheck self test for GuC submission

When GuC submission is enabled, the GuC controls engine resets. Rather
than explicitly triggering a reset, the driver must submit a hanging
context to GuC and wait for the reset to occur.

Conversely, one of the tests specifically sends hanging batches to the
engines but wants them to sit around until a manual reset of the full
GT (including GuC itself). That means disabling GuC based engine
resets to prevent those from killing the hanging batch too soon. So,
add support to the scheduling policy helper for disabling resets as
well as making them quicker!

In GuC submission mode, the 'is engine idle' test basically turns into
'is engine PM wakelock held'. Independently, there is a heartbeat
disable helper function that the tests use. For unexplained reasons,
this acquires the engine wakelock before disabling the heartbeat and
only releases it when re-enabling the heartbeat. As one of the tests
tries to do a wait for idle in the middle of a heartbeat disabled
section, it is therefore guaranteed to always fail. Added a 'no_pm'
variant of the heartbeat helper that allows the engine to be asleep
while also having heartbeats disabled.

Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-31-matthew.brost@intel.com

show more ...

drm/i915/selftest: Fix workarounds selftest for GuC submission

When GuC submission is enabled, the GuC controls engine resets. Rather
than explicitly triggering a reset, the driver must submit a han

drm/i915/selftest: Fix workarounds selftest for GuC submission

When GuC submission is enabled, the GuC controls engine resets. Rather
than explicitly triggering a reset, the driver must submit a hanging
context to GuC and wait for the reset to occur.

Signed-off-by: Rahul Kumar Singh <rahul.kumar.singh@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-28-matthew.brost@intel.com

show more ...

drm/i915/selftests: Allow for larger engine counts

Increasing the engine count causes a couple of local array variables
to exceed the kernel stack limit. So make them dynamic allocations
instead.

S

drm/i915/selftests: Allow for larger engine counts

Increasing the engine count causes a couple of local array variables
to exceed the kernel stack limit. So make them dynamic allocations
instead.

Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721223043.834562-8-matthew.d.roper@intel.com

show more ...

drm/i915: Add GT support for multiple types of multicast steering

Although most of our multicast registers are replicated per-subslice, we
also have a small number of multicast registers that are re

drm/i915: Add GT support for multiple types of multicast steering

Although most of our multicast registers are replicated per-subslice, we
also have a small number of multicast registers that are replicated
per-l3 bank instead. For both types of multicast registers we need to
make sure we steer reads of these registers to a valid instance.
Ideally we'd like to find a specific instance ID that would steer reads
of either type of multicast register to a valid instance (i.e., not
fused off and not powered down), but sometimes the combination of
part-specific fusing and the additional restrictions imposed by Render
Power Gating make it impossible to find any overlap between the set of
valid subslices and valid l3 banks. This problem will become even more
noticeable on our upcoming platforms since they will be adding
additional types of multicast registers with new types of replication
and rules for finding valid instances for reads.

To handle this we'll continue to pick a suitable subslice instance at
driver startup and program this as the default (sliceid,subsliceid)
setting in the steering control register (0xFDC). In cases where we
need to read another type of multicast GT register, but the default
subslice steering would not correspond to a valid instance, we'll
explicitly re-steer the single read to a valid value, perform the read,
and then reset the steering to it's "subslice" default.

This patch adds the general functionality to prepare for this explicit
steering of other multicast register types. We'll plug L3 bank steering
into this in the next patch, and then add additional types of multicast
registers when the support for our next upcoming platform arrives.

v2:
- Use entry->end==0 as table terminator. (Rodrigo)
- Grab forcewake in wa_list_verify() now that we're using accessors
that assume forcewake is already held.

v3:
- Fix loop condition when iterating over steering range tables.
(Rodrigo)

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210617211425.1943662-3-matthew.d.roper@intel.com

show more ...

drm/i915/gt: replace IS_GEN and friends with GRAPHICS_VER

This was done by the following semantic patch:

@@ expression i915; @@
- INTEL_GEN(i915)
+ GRAPHICS_VER(i915)

@@ expression i915; expre

drm/i915/gt: replace IS_GEN and friends with GRAPHICS_VER

This was done by the following semantic patch:

@@ expression i915; @@
- INTEL_GEN(i915)
+ GRAPHICS_VER(i915)

@@ expression i915; expression E; @@
- INTEL_GEN(i915) >= E
+ GRAPHICS_VER(i915) >= E

@@ expression dev_priv; expression E; @@
- !IS_GEN(dev_priv, E)
+ GRAPHICS_VER(dev_priv) != E

@@ expression dev_priv; expression E; @@
- IS_GEN(dev_priv, E)
+ GRAPHICS_VER(dev_priv) == E

@@
expression dev_priv;
expression from, until;
@@
- IS_GEN_RANGE(dev_priv, from, until)
+ IS_GRAPHICS_VER(dev_priv, from, until)

@def@
expression E;
identifier id =~ "^gen$";
@@
- id = GRAPHICS_VER(E)
+ ver = GRAPHICS_VER(E)

@@
identifier def.id;
@@
- id
+ ver

It also takes care of renaming the variable we assign to GRAPHICS_VER()
so to use "ver" rather than "gen".

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210605155356.4183026-2-lucas.demarchi@intel.com

show more ...

drm/i915/selftests: replace unused mask with simple version

Since its introduction 2 years ago, we never used the mask to span more
than one gen. Replace gen_mask a single number and start using the

drm/i915/selftests: replace unused mask with simple version

Since its introduction 2 years ago, we never used the mask to span more
than one gen. Replace gen_mask a single number and start using the new
GRAPHICS_VER().

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210413051002.92589-7-lucas.demarchi@intel.com

show more ...

drm/i915/selftests: Check for engine-reset errors in the middle of workarounds

As we reset the engine between verifying the workarounds remain intact,
report an engine reset failure.

Signed-off-by:

drm/i915/selftests: Check for engine-reset errors in the middle of workarounds

As we reset the engine between verifying the workarounds remain intact,
report an engine reset failure.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210125140136.10494-1-chris@chris-wilson.co.uk
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

show more ...

drm/i915/gt: SPDX cleanup

Clean up the SPDX licence declarations to comply with checkpatch.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@in

drm/i915/gt: SPDX cleanup

Clean up the SPDX licence declarations to comply with checkpatch.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210122192913.4518-1-chris@chris-wilson.co.uk
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

show more ...

drm/i915: Fix workarounds selftest, part 1

pin_map needs the ww lock, so ensure we pin both before submission.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thom

drm/i915: Fix workarounds selftest, part 1

pin_map needs the ww lock, so ensure we pin both before submission.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
[danvet: Again pick older version just to side-step conflicts.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210128162612.927917-32-maarten.lankhorst@linux.intel.com
Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-32-maarten.lankhorst@linux.intel.com

show more ...

drm/i915: Move pinning to inside engine_wa_list_verify()

This should be done as part of the ww loop, in order to remove a
i915_vma_pin that needs ww held.

Now only i915_ggtt_pin() callers remaining

drm/i915: Move pinning to inside engine_wa_list_verify()

This should be done as part of the ww loop, in order to remove a
i915_vma_pin that needs ww held.

Now only i915_ggtt_pin() callers remaining.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-25-maarten.lankhorst@linux.intel.com

show more ...

drm/i915/gt: Provide a utility to create a scratch buffer

Primarily used by selftests, but also by runtime debugging of engine
w/a, is a routine to create a temporarily bound buffer for readback.
Al

drm/i915/gt: Provide a utility to create a scratch buffer

Primarily used by selftests, but also by runtime debugging of engine
w/a, is a routine to create a temporarily bound buffer for readback.
Almagamate the duplicated routines into one.

Suggested-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201219020343.22681-2-chris@chris-wilson.co.uk

show more ...

drm/i915/gt: Wean workaround selftests off GEM context

The workarounds are tied to the GT and we should derive the tests local
to the GT.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Revi

drm/i915/gt: Wean workaround selftests off GEM context

The workarounds are tied to the GT and we should derive the tests local
to the GT.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201210080240.24529-2-chris@chris-wilson.co.uk

show more ...

drm/i915: Add an implementation for i915_gem_ww_ctx locking, v2.

i915_gem_ww_ctx is used to lock all gem bo's for pinning and memory
eviction. We don't use it yet, but lets start adding the definiti

drm/i915: Add an implementation for i915_gem_ww_ctx locking, v2.

i915_gem_ww_ctx is used to lock all gem bo's for pinning and memory
eviction. We don't use it yet, but lets start adding the definition
first.

To use it, we have to pass a non-NULL ww to gem_object_lock, and don't
unlock directly. It is done in i915_gem_ww_ctx_fini.

Changes since v1:
- Change ww_ctx and obj order in locking functions (Jonas Lahtinen)

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200819140904.1708856-6-maarten.lankhorst@linux.intel.com
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

drm/i915: work around false-positive maybe-uninitialized warning

gcc-9 gets confused by the code flow in check_dirty_whitelist:

drivers/gpu/drm/i915/gt/selftest_workarounds.c: In function 'check_di

drm/i915: work around false-positive maybe-uninitialized warning

gcc-9 gets confused by the code flow in check_dirty_whitelist:

drivers/gpu/drm/i915/gt/selftest_workarounds.c: In function 'check_dirty_whitelist':
drivers/gpu/drm/i915/gt/selftest_workarounds.c:492:17: error: 'rsvd' may be used uninitialized in this function [-Werror=maybe-uninitialized]

I could not figure out a good way to do this in a way that gcc
understands better, so initialize the variable to zero, as last
resort.

Fixes: aee20aaed887 ("drm/i915: Implement read-only support in whitelist selftest")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200527140526.1458215-2-arnd@arndb.de
(cherry picked from commit cc649a9eafc1ef5c40db023084cb94422d08aa84)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

drm/i915/selftests: Ignore autoincrementing timestamp on verfifying whitelists

As a timestamp will automatically update itself, it will not hold only
contexts we write into it, and will change from

drm/i915/selftests: Ignore autoincrementing timestamp on verfifying whitelists

As a timestamp will automatically update itself, it will not hold only
contexts we write into it, and will change from the baseline value
making us suspect that our writes are landing. As this confuses us and
we would need more careful treatment to detect invalid stores into the
timestamp, skip it when verifying the whitelists.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200602154839.6902-1-chris@chris-wilson.co.uk

show more ...

drm/i915: work around false-positive maybe-uninitialized warning

gcc-9 gets confused by the code flow in check_dirty_whitelist:

drivers/gpu/drm/i915/gt/selftest_workarounds.c: In function 'check_di

drm/i915: work around false-positive maybe-uninitialized warning

gcc-9 gets confused by the code flow in check_dirty_whitelist:

drivers/gpu/drm/i915/gt/selftest_workarounds.c: In function 'check_dirty_whitelist':
drivers/gpu/drm/i915/gt/selftest_workarounds.c:492:17: error: 'rsvd' may be used uninitialized in this function [-Werror=maybe-uninitialized]

I could not figure out a good way to do this in a way that gcc
understands better, so initialize the variable to zero, as last
resort.

Fixes: aee20aaed887 ("drm/i915: Implement read-only support in whitelist selftest")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200527140526.1458215-2-arnd@arndb.de

show more ...

drm/i915/selftests: Also wait for the scratch buffer to be bound

Since PIN_GLOBAL is no longer guaranteed to be synchronous, we must not
forget to include a wait-for-vma prior to execution.

Signed-

drm/i915/selftests: Also wait for the scratch buffer to be bound

Since PIN_GLOBAL is no longer guaranteed to be synchronous, we must not
forget to include a wait-for-vma prior to execution.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200131142610.3100998-1-chris@chris-wilson.co.uk

show more ...