drm/i915: Move GraphicsTechnology files under gt/

Start partitioning off the code that talks to the hardware (GT) from the
uapi layers and move the device facing code under gt/

One casualty is s/in

drm/i915: Move GraphicsTechnology files under gt/

Start partitioning off the code that talks to the hardware (GT) from the
uapi layers and move the device facing code under gt/

One casualty is s/intel_ringbuffer.h/intel_engine.h/ with the plan to
subdivide that header and body further (and split out the submission
code from the ringbuffer and logical context handling). This patch aims
to be simple motion so git can fixup inflight patches with little mess.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190424174839.7141-1-chris@chris-wilson.co.uk

show more ...

drm/i915/selftests: Enable selftesting of busy-stats

A couple of very simple tests to ensure that the basic properties of
per-engine busyness accounting [0% and 100% busy] are faithful.

drm/i915/selftests: Enable selftesting of busy-stats

A couple of very simple tests to ensure that the basic properties of
per-engine busyness accounting [0% and 100% busy] are faithful.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200617130916.15261-1-chris@chris-wilson.co.uk

show more ...

drm/i915/selftests: Dump engine state and trace upon hanging after reset

If the engine dies after a reset, and so we fail to submit a request
but need to be interrupted by the CI runner,

drm/i915/selftests: Dump engine state and trace upon hanging after reset

If the engine dies after a reset, and so we fail to submit a request
but need to be interrupted by the CI runner, dump the engine state.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200615165013.22973-2-chris@chris-wilson.co.uk

show more ...

drm/i915/selftests: Teach hang-self to target only itself

We have a test case to exercise resetting an engine while the other
engines are busy, all the TEST_SELF adds on top is that the

drm/i915/selftests: Teach hang-self to target only itself

We have a test case to exercise resetting an engine while the other
engines are busy, all the TEST_SELF adds on top is that the target
engine also has background activity. In this case it is useful to first
test resetting the engine while there is background activity, as a
separate flag from exercising all others.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200607222108.14401-3-chris@chris-wilson.co.uk

show more ...

drm/i915/selftests: Make the hanging request non-preemptible

In some of our hangtests, we try to reset an active engine while it is
spinning inside the recursive spinner. However, we als

drm/i915/selftests: Make the hanging request non-preemptible

In some of our hangtests, we try to reset an active engine while it is
spinning inside the recursive spinner. However, we also try to flood the
engine with requests that preempt the hang, and so should disable the
preemption to be sure that we reset the right request.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200607222108.14401-2-chris@chris-wilson.co.uk

show more ...

drm/i915/selftests: Restore to default heartbeat

Since we temporarily disable the heartbeat and restore back to the
default value, we can use the stored defaults on the engine and avoid

drm/i915/selftests: Restore to default heartbeat

Since we temporarily disable the heartbeat and restore back to the
default value, we can use the stored defaults on the engine and avoid
using a local.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200519063123.20673-3-chris@chris-wilson.co.uk

show more ...

drm/i915: Apply i915_request_skip() on submission

Trying to use i915_request_skip() prior to i915_request_add() causes us
to try and fill the ring upto request->postfix, which has not ye

drm/i915: Apply i915_request_skip() on submission

Trying to use i915_request_skip() prior to i915_request_add() causes us
to try and fill the ring upto request->postfix, which has not yet been
set, and so may cause us to memset() past the end of the ring.

Instead of skipping the request immediately, just flag the error on the
request (only accepting the first fatal error we see) and then clear the
request upon submission.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200304121849.2448028-1-chris@chris-wilson.co.uk

show more ...

drm/i915/guc: Kill USES_GUC_SUBMISSION macro

use intel_uc_uses_guc_submission() directly instead, to be consistent in
the way we check what we want to do with the GuC.

v2: do no

drm/i915/guc: Kill USES_GUC_SUBMISSION macro

use intel_uc_uses_guc_submission() directly instead, to be consistent in
the way we check what we want to do with the GuC.

v2: do not go through ctx->vm->gt, use i915->gt instead

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> #v1
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200218223327.11058-3-daniele.ceraolospurio@intel.com

show more ...

drm/i915: Start chopping up the GPU error capture

In the near future, we will want to start a GPU error capture from a new
context, from inside the softirq region of a forced preemption.

drm/i915: Start chopping up the GPU error capture

In the near future, we will want to start a GPU error capture from a new
context, from inside the softirq region of a forced preemption. To do
so requires us to break up the monolithic error capture to provide new
entry points with finer control; in particular focusing on one
engine/gt, and being able to compose an error state from little pieces
of HW capture.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Acked-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200110123059.1348712-1-chris@chris-wilson.co.uk

show more ...

drm/i915/gtt: split up i915_gem_gtt

Attempt to split i915_gem_gtt.[ch] into more manageable chunks.

Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Matthew

drm/i915/gtt: split up i915_gem_gtt

Attempt to split i915_gem_gtt.[ch] into more manageable chunks.

Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200107134009.3255354-1-chris@chris-wilson.co.uk

show more ...

drm/i915: Remove i915->kernel_context

Allocate only an internal intel_context for the kernel_context, forgoing
a global GEM context for internal use as we only require a separate
add

drm/i915: Remove i915->kernel_context

Allocate only an internal intel_context for the kernel_context, forgoing
a global GEM context for internal use as we only require a separate
address space (for our own protection).

Now having weaned GT from requiring ce->gem_context, we can stop
referencing it entirely. This also means we no longer have to create random
and unnecessary GEM contexts for internal use.

GEM contexts are now entirely for tracking GEM clients, and intel_context
the execution environment on the GPU.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Acked-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191221160324.1073045-1-chris@chris-wilson.co.uk

show more ...

drm/i915/selftests: Complete transition to a real struct file mock

Since drm provided us with a real struct file we can use for our
anonymous internal clients (mock_file), complete our t

drm/i915/selftests: Complete transition to a real struct file mock

Since drm provided us with a real struct file we can use for our
anonymous internal clients (mock_file), complete our transition to using
that as the primary interface (and not the mocked up struct drm_file we
previous were using).

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107213929.23286-1-chris@chris-wilson.co.uk

show more ...

drm/i915/selftests: Replace mock_file hackery with drm's true fake

As drm now exports a method to create an anonymous struct file around a
drm_device for internal use, make use of it to

drm/i915/selftests: Replace mock_file hackery with drm's true fake

As drm now exports a method to create an anonymous struct file around a
drm_device for internal use, make use of it to avoid our horrible hacks.

Danial suggested that the mock_file_put() wrapper was suitable for
drm-core, along with the mock_drm_getfile() [and that the vestigal
mock_drm_file() in this patch should perhaps be the drm interface
itself]. However, the eventual goal is to remove the mock_drm_file() and
use the struct file and fput() directly, in this patch we take a simple
transition in that direction.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107180601.30815-3-chris@chris-wilson.co.uk

show more ...

drm/i915/selftests: Start kthreads before stopping

An interesting observation made with our parallel selftests was that on
our small/single cpu systems we would call kthread_stop() befor

drm/i915/selftests: Start kthreads before stopping

An interesting observation made with our parallel selftests was that on
our small/single cpu systems we would call kthread_stop() before the
kthreads were spawned. If this happens, the kthread is never run at all;
completely bypassing the test.

A simple yield() from the parent will ensure that all children have the
opportunity to start before we reap them.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191101084940.31838-1-chris@chris-wilson.co.uk

show more ...

drm/i915/selftests: check for missing aperture

We may be missing support for the mappable aperture on some platforms.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Da

drm/i915/selftests: check for missing aperture

We may be missing support for the mappable aperture on some platforms.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191029095856.25431-7-matthew.auld@intel.com

show more ...

drm/i915/selftests: Drop global engine lookup for gt selftests

As we are inside the gt, we have a local gt->engine[] lookup we should
be using in preference over the i915->engine[] copy.

drm/i915/selftests: Drop global engine lookup for gt selftests

As we are inside the gt, we have a local gt->engine[] lookup we should
be using in preference over the i915->engine[] copy.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191027225808.19437-1-chris@chris-wilson.co.uk

show more ...

drm/i915/selftests: Flush interrupts before disabling tasklets

When setting up the system to perform the atomic reset, we need to
serialise with any ongoing interrupt tasklet or else:

drm/i915/selftests: Flush interrupts before disabling tasklets

When setting up the system to perform the atomic reset, we need to
serialise with any ongoing interrupt tasklet or else:

<0> [472.951428] i915_sel-4442 0d..1 466527056us : __i915_request_submit: rcs0 fence 11659:2, current 0
<0> [472.951554] i915_sel-4442 0d..1 466527059us : __execlists_submission_tasklet: rcs0: queue_priority_hint:-2147483648, submit:yes
<0> [472.951681] i915_sel-4442 0d..1 466527061us : trace_ports: rcs0: submit { 11659:2, 0:0 }
<0> [472.951805] i915_sel-4442 0.... 466527114us : __igt_atomic_reset_engine: i915_reset_engine(rcs0:active) under hardirq
<0> [472.951932] i915_sel-4442 0d... 466527115us : intel_engine_reset: rcs0 flags=11d
<0> [472.952056] i915_sel-4442 0d... 466527117us : execlists_reset_prepare: rcs0: depth<-1
<0> [472.952179] i915_sel-4442 0d... 466527119us : intel_engine_stop_cs: rcs0
<0> [472.952305] <idle>-0 1..s1 466527119us : process_csb: rcs0 cs-irq head=3, tail=4
<0> [472.952431] i915_sel-4442 0d... 466527122us : __intel_gt_reset: engine_mask=1
<0> [472.952557] <idle>-0 1..s1 466527124us : process_csb: rcs0 csb[4]: status=0x00000001:0x00000000
<0> [472.952683] <idle>-0 1..s1 466527130us : trace_ports: rcs0: promote { 11659:2*, 0:0 }
<0> [472.952808] i915_sel-4442 0d... 466527131us : execlists_reset: rcs0
<0> [472.952933] i915_sel-4442 0d..1 466527133us : process_csb: rcs0 cs-irq head=3, tail=4
<0> [472.953059] i915_sel-4442 0d..1 466527134us : process_csb: rcs0 csb[4]: status=0x00000001:0x00000000
<0> [472.953185] i915_sel-4442 0d..1 466527136us : trace_ports: rcs0: preempted { 11659:2*, 0:0 }
<0> [472.953310] i915_sel-4442 0d..1 466527150us : assert_pending_valid: Nothing pending for promotion!
<0> [472.953436] i915_sel-4442 0d..1 466527158us : process_csb: process_csb:1930 GEM_BUG_ON(!assert_pending_valid(execlists, "promote"))

We have the same CSB events being seen by process_csb() on two different
processors. One being issued by the reset in the test, the other by the
interrupt; this scenario is supposed to be prevented by flushing the
interrupt tasklet with tasklet_disable() before we enter the atomic
reset.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112069
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191023232443.17450-1-chris@chris-wilson.co.uk

show more ...

drm/i915/gt: Replace hangcheck by heartbeats

Replace sampling the engine state every so often with a periodic
heartbeat request to measure the health of an engine. This is coupled
wi

drm/i915/gt: Replace hangcheck by heartbeats

Replace sampling the engine state every so often with a periodic
heartbeat request to measure the health of an engine. This is coupled
with the forced-preemption to allow long running requests to survive so
long as they do not block other users.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Reviewed-by: Jon Bloomfield <jon.bloomfield@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191023133108.21401-5-chris@chris-wilson.co.uk

show more ...

drm/i915: Pass in intel_gt at some for_each_engine sites

Where the function, or code segment, operates on intel_gt, we need to
start passing it instead of i915 to for_each_engine(_masked

drm/i915: Pass in intel_gt at some for_each_engine sites

Where the function, or code segment, operates on intel_gt, we need to
start passing it instead of i915 to for_each_engine(_masked).

This is another partial step in migration of i915->engines[] to
gt->engines[].

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191017094500.21831-2-tvrtko.ursulin@linux.intel.com

show more ...

drm/i915/gt: Prefer local path to runtime powermanagement

Avoid going to the base i915 device when we already have a path from gt
to the runtime powermanagement interface. The benefit is

drm/i915/gt: Prefer local path to runtime powermanagement

Avoid going to the base i915 device when we already have a path from gt
to the runtime powermanagement interface. The benefit is that it looks a
bit more self-consistent to always be acquiring the gt->uncore->rpm for
use with the gt->uncore.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191007154531.1750-1-chris@chris-wilson.co.uk

show more ...

drm/i915: Move context management under GEM

Keep track of the GEM contexts underneath i915->gem.contexts and assign
them their own lock for the purposes of list management.

v2:

drm/i915: Move context management under GEM

Keep track of the GEM contexts underneath i915->gem.contexts and assign
them their own lock for the purposes of list management.

v2: Focus on lock tracking; ctx->vm is protected by ctx->mutex
v3: Correct split with removal of logical HW ID

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004134015.13204-15-chris@chris-wilson.co.uk

show more ...

drm/i915: Drop struct_mutex from around i915_retire_requests()

We don't need to hold struct_mutex now for retiring requests, so drop it
from i915_retire_requests() and i915_gem_wait_for_

drm/i915: Drop struct_mutex from around i915_retire_requests()

We don't need to hold struct_mutex now for retiring requests, so drop it
from i915_retire_requests() and i915_gem_wait_for_idle(), finally
removing I915_WAIT_LOCKED for good.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004134015.13204-8-chris@chris-wilson.co.uk

show more ...

drm/i915: Pull i915_vma_pin under the vm->mutex

Replace the struct_mutex requirement for pinning the i915_vma with the
local vm->mutex instead. Note that the vm->mutex is tainted by the

drm/i915: Pull i915_vma_pin under the vm->mutex

Replace the struct_mutex requirement for pinning the i915_vma with the
local vm->mutex instead. Note that the vm->mutex is tainted by the
shrinker (we require unbinding from inside fs-reclaim) and so we cannot
allocate while holding that mutex. Instead we have to preallocate
workers to do allocate and apply the PTE updates after we have we
reserved their slot in the drm_mm (using fences to order the PTE writes
with the GPU work and with later unbind).

In adding the asynchronous vma binding, one subtle requirement is to
avoid coupling the binding fence into the backing object->resv. That is
the asynchronous binding only applies to the vma timeline itself and not
to the pages as that is a more global timeline (the binding of one vma
does not need to be ordered with another vma, nor does the implicit GEM
fencing depend on a vma, only on writes to the backing store). Keeping
the vma binding distinct from the backing store timelines is verified by
a number of async gem_exec_fence and gem_exec_schedule tests. The way we
do this is quite simple, we keep the fence for the vma binding separate
and only wait on it as required, and never add it to the obj->resv
itself.

Another consequence in reducing the locking around the vma is the
destruction of the vma is no longer globally serialised by struct_mutex.
A natural solution would be to add a kref to i915_vma, but that requires
decoupling the reference cycles, possibly by introducing a new
i915_mm_pages object that is own by both obj->mm and vma->pages.
However, we have not taken that route due to the overshadowing lmem/ttm
discussions, and instead play a series of complicated games with
trylocks to (hopefully) ensure that only one destruction path is called!

v2: Add some commentary, and some helpers to reduce patch churn.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004134015.13204-4-chris@chris-wilson.co.uk

show more ...

drm/i915: Pass intel_gt to has-reset?

As we execute GPU resets on a gt/ basis, and use the intel_gt as the
primary for all other reset functions, also use it for the has-reset?
predi

drm/i915: Pass intel_gt to has-reset?

As we execute GPU resets on a gt/ basis, and use the intel_gt as the
primary for all other reset functions, also use it for the has-reset?
predicates. Gradually simplifying the churn of pointers.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190927211749.2181-1-chris@chris-wilson.co.uk

show more ...

drm/i915: Track ggtt fence reservations under its own mutex

We can reduce the locking for fence registers from the dev->struct_mutex
to a local mutex. We could introduce a mutex for the

drm/i915: Track ggtt fence reservations under its own mutex

We can reduce the locking for fence registers from the dev->struct_mutex
to a local mutex. We could introduce a mutex for the sole purpose of
tracking the fence acquisition, except there is a little bit of overlap
with the fault tracking, so use the i915_ggtt.mutex as it covers both.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190822060914.2671-1-chris@chris-wilson.co.uk

show more ...