drm/gem: rename struct drm_gem_dma_object.{paddr => dma_addr}

The field paddr of struct drm_gem_dma_object holds a DMA address, which
might actually be a physical address. However, depending on the

drm/gem: rename struct drm_gem_dma_object.{paddr => dma_addr}

The field paddr of struct drm_gem_dma_object holds a DMA address, which
might actually be a physical address. However, depending on the platform,
it can also be a bus address or a virtual address managed by an IOMMU.

Hence, rename the field to dma_addr, which is more applicable.

In order to do this renaming the following coccinelle script was used:

```
@@
struct drm_gem_dma_object *gem;
@@

- gem->paddr
+ gem->dma_addr

@@
struct drm_gem_dma_object gem;
@@

- gem.paddr
+ gem.dma_addr

@exists@
typedef dma_addr_t;
symbol paddr;
@@

dma_addr_t paddr;
<...
- paddr
+ dma_addr
...>

@@
symbol paddr;
@@
dma_addr_t
- paddr
+ dma_addr
;

```

This patch is compile-time tested with:

```
make ARCH={x86_64,arm,arm64} allyesconfig
make ARCH={x86_64,arm,arm64} drivers/gpu/drm`
```

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-5-dakr@redhat.com

show more ...

drm/gem: rename GEM CMA helpers to GEM DMA helpers

Rename "GEM CMA" helpers to "GEM DMA" helpers - considering the
hierarchy of APIs (mm/cma -> dma -> gem dma) calling them "GEM
DMA" seems to be mor

drm/gem: rename GEM CMA helpers to GEM DMA helpers

Rename "GEM CMA" helpers to "GEM DMA" helpers - considering the
hierarchy of APIs (mm/cma -> dma -> gem dma) calling them "GEM
DMA" seems to be more applicable.

Besides that, commit e57924d4ae80 ("drm/doc: Task to rename CMA helpers")
requests to rename the CMA helpers and implies that people seem to be
confused about the naming.

In order to do this renaming the following script was used:

```
#!/bin/bash

DIRS="drivers/gpu include/drm Documentation/gpu"

REGEX_SYM_UPPER="[0-9A-Z_\-]"
REGEX_SYM_LOWER="[0-9a-z_\-]"

REGEX_GREP_UPPER="(${REGEX_SYM_UPPER}*)(GEM)_CMA_(${REGEX_SYM_UPPER}*)"
REGEX_GREP_LOWER="(${REGEX_SYM_LOWER}*)(gem)_cma_(${REGEX_SYM_LOWER}*)"

REGEX_SED_UPPER="s/${REGEX_GREP_UPPER}/\1\2_DMA_\3/g"
REGEX_SED_LOWER="s/${REGEX_GREP_LOWER}/\1\2_dma_\3/g"

# Find all upper case 'CMA' symbols and replace them with 'DMA'.
for ff in $(grep -REHl "${REGEX_GREP_UPPER}" $DIRS)
do
sed -i -E "$REGEX_SED_UPPER" $ff
done

# Find all lower case 'cma' symbols and replace them with 'dma'.
for ff in $(grep -REHl "${REGEX_GREP_LOWER}" $DIRS)
do
sed -i -E "$REGEX_SED_LOWER" $ff
done

# Replace all occurrences of 'CMA' / 'cma' in comments and
# documentation files with 'DMA' / 'dma'.
for ff in $(grep -RiHl " cma " $DIRS)
do
sed -i -E "s/ cma / dma /g" $ff
sed -i -E "s/ CMA / DMA /g" $ff
done

# Rename all 'cma_obj's to 'dma_obj'.
for ff in $(grep -RiHl "cma_obj" $DIRS)
do
sed -i -E "s/cma_obj/dma_obj/g" $ff
done
```

Only a few more manual modifications were needed, e.g. reverting the
following modifications in some DRM Kconfig files

- select CMA if HAVE_DMA_CONTIGUOUS
+ select DMA if HAVE_DMA_CONTIGUOUS

as well as manually picking the occurrences of 'CMA'/'cma' in comments and
documentation which relate to "GEM CMA", but not "FB CMA".

Also drivers/gpu/drm/Makefile was fixed up manually after renaming
drm_gem_cma_helper.c to drm_gem_dma_helper.c.

This patch is compile-time tested building a x86_64 kernel with
`make allyesconfig && make drivers/gpu/drm`.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> #drivers/gpu/drm/arm
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-4-dakr@redhat.com

show more ...

drm/fb: rename FB CMA helpers to FB DMA helpers

Rename "FB CMA" helpers to "FB DMA" helpers - considering the hierarchy
of APIs (mm/cma -> dma -> fb dma) calling them "FB DMA" seems to be
more appli

drm/fb: rename FB CMA helpers to FB DMA helpers

Rename "FB CMA" helpers to "FB DMA" helpers - considering the hierarchy
of APIs (mm/cma -> dma -> fb dma) calling them "FB DMA" seems to be
more applicable.

Besides that, commit e57924d4ae80 ("drm/doc: Task to rename CMA helpers")
requests to rename the CMA helpers and implies that people seem to be
confused about the naming.

In order to do this renaming the following script was used:

```
#!/bin/bash

DIRS="drivers/gpu include/drm Documentation/gpu"

REGEX_SYM_UPPER="[0-9A-Z_\-]"
REGEX_SYM_LOWER="[0-9a-z_\-]"

REGEX_GREP_UPPER="(${REGEX_SYM_UPPER}*)(FB)_CMA_(${REGEX_SYM_UPPER}*)"
REGEX_GREP_LOWER="(${REGEX_SYM_LOWER}*)(fb)_cma_(${REGEX_SYM_LOWER}*)"

REGEX_SED_UPPER="s/${REGEX_GREP_UPPER}/\1\2_DMA_\3/g"
REGEX_SED_LOWER="s/${REGEX_GREP_LOWER}/\1\2_dma_\3/g"

# Find all upper case 'CMA' symbols and replace them with 'DMA'.
for ff in $(grep -REHl "${REGEX_GREP_UPPER}" $DIRS)
do
sed -i -E "$REGEX_SED_UPPER" $ff
done

# Find all lower case 'cma' symbols and replace them with 'dma'.
for ff in $(grep -REHl "${REGEX_GREP_LOWER}" $DIRS)
do
sed -i -E "$REGEX_SED_LOWER" $ff
done

# Replace all occurrences of 'CMA' / 'cma' in comments and
# documentation files with 'DMA' / 'dma'.
for ff in $(grep -RiHl " cma " $DIRS)
do
sed -i -E "s/ cma / dma /g" $ff
sed -i -E "s/ CMA / DMA /g" $ff
done
```

Only a few more manual modifications were needed, e.g. reverting the
following modifications in some DRM Kconfig files

- select CMA if HAVE_DMA_CONTIGUOUS
+ select DMA if HAVE_DMA_CONTIGUOUS

as well as manually picking the occurrences of 'CMA'/'cma' in comments and
documentation which relate to "FB CMA", but not "GEM CMA".

This patch is compile-time tested building a x86_64 kernel with
`make allyesconfig && make drivers/gpu/drm`.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> #drivers/gpu/drm/arm
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-3-dakr@redhat.com

show more ...

drm/fsl-dcu: Use drm_plane_helper_destroy()

Replace the driver's own function with drm_plane_helper_destroy(). No
functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed

drm/fsl-dcu: Use drm_plane_helper_destroy()

Replace the driver's own function with drm_plane_helper_destroy(). No
functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220720083058.15371-8-tzimmermann@suse.de

show more ...

drm: Remove unnecessary include statements of drm_plane_helper.h

Remove the include statement for drm_plane_helper.h from all the files
that don't need it. Althogh the header file is almost empty, m

drm: Remove unnecessary include statements of drm_plane_helper.h

Remove the include statement for drm_plane_helper.h from all the files
that don't need it. Althogh the header file is almost empty, many drivers
include it somewhere.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220720083058.15371-5-tzimmermann@suse.de

show more ...

drm: Drop drm_framebuffer.h from drm_crtc.h

drm_crtc.h has no need for drm_frambuffer.h, so don't include it.
Avoids useless rebuilds of the entire universe when
touching drm_framebuffer.h.

Quite a

drm: Drop drm_framebuffer.h from drm_crtc.h

drm_crtc.h has no need for drm_frambuffer.h, so don't include it.
Avoids useless rebuilds of the entire universe when
touching drm_framebuffer.h.

Quite a few placs do currently depend on drm_framebuffer.h without
actually including it directly. All of those need to be fixed
up.

v2: Fix up msm some more
v2: Deal with ingenic and shmobile as well

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220614095449.29311-1-ville.syrjala@linux.intel.com
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>

show more ...

drm: Use state helper instead of the plane state pointer

Many drivers reference the plane->state pointer in order to get the
current plane state in their atomic_update or atomic_disable hooks,
which

drm: Use state helper instead of the plane state pointer

Many drivers reference the plane->state pointer in order to get the
current plane state in their atomic_update or atomic_disable hooks,
which would be the new plane state in the global atomic state since
_swap_state happened when those hooks are run.

Use the drm_atomic_get_new_plane_state helper to get that state to make it
more obvious.

This was made using the coccinelle script below:

@ plane_atomic_func @
identifier helpers;
identifier func;
@@

(
static const struct drm_plane_helper_funcs helpers = {
...,
.atomic_disable = func,
...,
};
|
static const struct drm_plane_helper_funcs helpers = {
...,
.atomic_update = func,
...,
};
)

@ adds_new_state @
identifier plane_atomic_func.func;
identifier plane, state;
identifier new_state;
@@

func(struct drm_plane *plane, struct drm_atomic_state *state)
{
...
- struct drm_plane_state *new_state = plane->state;
+ struct drm_plane_state *new_state = drm_atomic_get_new_plane_state(state, plane);
...
}

@ include depends on adds_new_state @
@@

#include <drm/drm_atomic.h>

@ no_include depends on !include && adds_new_state @
@@

+ #include <drm/drm_atomic.h>
#include <drm/...>

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20210219120032.260676-1-maxime@cerno.tech

show more ...

drm/atomic: Pass the full state to planes atomic disable and update

The current atomic helpers have either their object state being passed as
an argument or the full atomic state.

The former is the

drm/atomic: Pass the full state to planes atomic disable and update

The current atomic helpers have either their object state being passed as
an argument or the full atomic state.

The former is the pattern that was done at first, before switching to the
latter for new hooks or when it was needed.

Let's convert the remaining helpers to provide a consistent interface,
this time with the planes atomic_update and atomic_disable.

The conversion was done using the coccinelle script below, built tested on
all the drivers.

@@
identifier plane, plane_state;
symbol state;
@@

struct drm_plane_helper_funcs {
...
void (*atomic_update)(struct drm_plane *plane,
- struct drm_plane_state *plane_state);
+ struct drm_atomic_state *state);
...
}

@@
identifier plane, plane_state;
symbol state;
@@

struct drm_plane_helper_funcs {
...
void (*atomic_disable)(struct drm_plane *plane,
- struct drm_plane_state *plane_state);
+ struct drm_atomic_state *state);
...
}

@ plane_atomic_func @
identifier helpers;
identifier func;
@@

(
static const struct drm_plane_helper_funcs helpers = {
...,
.atomic_update = func,
...,
};
|
static const struct drm_plane_helper_funcs helpers = {
...,
.atomic_disable = func,
...,
};
)

@@
struct drm_plane_helper_funcs *FUNCS;
identifier f;
identifier crtc_state;
identifier plane, plane_state, state;
expression e;
@@

f(struct drm_crtc_state *crtc_state)
{
...
struct drm_atomic_state *state = e;
<+...
(
- FUNCS->atomic_disable(plane, plane_state)
+ FUNCS->atomic_disable(plane, state)
|
- FUNCS->atomic_update(plane, plane_state)
+ FUNCS->atomic_update(plane, state)
)
...+>
}

@@
identifier plane_atomic_func.func;
identifier plane;
symbol state;
@@

func(struct drm_plane *plane,
- struct drm_plane_state *state)
+ struct drm_plane_state *old_plane_state)
{
<...
- state
+ old_plane_state
...>
}

@ ignores_old_state @
identifier plane_atomic_func.func;
identifier plane, old_state;
@@

func(struct drm_plane *plane, struct drm_plane_state *old_state)
{
... when != old_state
}

@ adds_old_state depends on plane_atomic_func && !ignores_old_state @
identifier plane_atomic_func.func;
identifier plane, plane_state;
@@

func(struct drm_plane *plane, struct drm_plane_state *plane_state)
{
+ struct drm_plane_state *plane_state = drm_atomic_get_old_plane_state(state, plane);
...
}

@ depends on plane_atomic_func @
identifier plane_atomic_func.func;
identifier plane, plane_state;
@@

func(struct drm_plane *plane,
- struct drm_plane_state *plane_state
+ struct drm_atomic_state *state
)
{ ... }

@ include depends on adds_old_state @
@@

#include <drm/drm_atomic.h>

@ no_include depends on !include && adds_old_state @
@@

+ #include <drm/drm_atomic.h>
#include <drm/...>

@@
identifier plane_atomic_func.func;
identifier plane, state;
identifier plane_state;
@@

func(struct drm_plane *plane, struct drm_atomic_state *state) {
...
struct drm_plane_state *plane_state = drm_atomic_get_old_plane_state(state, plane);
<+...
- plane_state->state
+ state
...+>
}

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-9-maxime@cerno.tech

show more ...

drm: Rename plane->state variables in atomic update and disable

Some drivers are storing the plane->state pointer in atomic_update and
atomic_disable in a variable simply called state, while the sta

drm: Rename plane->state variables in atomic update and disable

Some drivers are storing the plane->state pointer in atomic_update and
atomic_disable in a variable simply called state, while the state passed
as an argument is called old_state.

In order to ease subsequent reworks and to avoid confusing or
inconsistent names, let's rename those variables to new_state.

This was done using the following coccinelle script, plus some manual
changes for mtk and tegra.

@ plane_atomic_func @
identifier helpers;
identifier func;
@@

(
static const struct drm_plane_helper_funcs helpers = {
...,
.atomic_disable = func,
...,
};
|
static const struct drm_plane_helper_funcs helpers = {
...,
.atomic_update = func,
...,
};
)

@ moves_new_state_old_state @
identifier plane_atomic_func.func;
identifier plane;
symbol old_state;
symbol state;
@@

func(struct drm_plane *plane, struct drm_plane_state *old_state)
{
...
- struct drm_plane_state *state = plane->state;
+ struct drm_plane_state *new_state = plane->state;
...
}

@ depends on moves_new_state_old_state @
identifier plane_atomic_func.func;
identifier plane;
identifier old_state;
symbol state;
@@

func(struct drm_plane *plane, struct drm_plane_state *old_state)
{
<...
- state
+ new_state
...>
}

@ moves_new_state_oldstate @
identifier plane_atomic_func.func;
identifier plane;
symbol oldstate;
symbol state;
@@

func(struct drm_plane *plane, struct drm_plane_state *oldstate)
{
...
- struct drm_plane_state *state = plane->state;
+ struct drm_plane_state *newstate = plane->state;
...
}

@ depends on moves_new_state_oldstate @
identifier plane_atomic_func.func;
identifier plane;
identifier old_state;
symbol state;
@@

func(struct drm_plane *plane, struct drm_plane_state *old_state)
{
<...
- state
+ newstate
...>
}

@ moves_new_state_old_pstate @
identifier plane_atomic_func.func;
identifier plane;
symbol old_pstate;
symbol state;
@@

func(struct drm_plane *plane, struct drm_plane_state *old_pstate)
{
...
- struct drm_plane_state *state = plane->state;
+ struct drm_plane_state *new_pstate = plane->state;
...
}

@ depends on moves_new_state_old_pstate @
identifier plane_atomic_func.func;
identifier plane;
identifier old_pstate;
symbol state;
@@

func(struct drm_plane *plane, struct drm_plane_state *old_pstate)
{
<...
- state
+ new_pstate
...>
}

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-8-maxime@cerno.tech

show more ...

drm/atomic: Pass the full state to planes atomic_check

The current atomic helpers have either their object state being passed as
an argument or the full atomic state.

The former is the pattern that

drm/atomic: Pass the full state to planes atomic_check

The current atomic helpers have either their object state being passed as
an argument or the full atomic state.

The former is the pattern that was done at first, before switching to the
latter for new hooks or when it was needed.

Let's convert all the remaining helpers to provide a consistent
interface, starting with the planes atomic_check.

The conversion was done using the coccinelle script below plus some
manual changes for vmwgfx, built tested on all the drivers.

@@
identifier plane, plane_state;
symbol state;
@@

struct drm_plane_helper_funcs {
...
int (*atomic_check)(struct drm_plane *plane,
- struct drm_plane_state *plane_state);
+ struct drm_atomic_state *state);
...
}

@ plane_atomic_func @
identifier helpers;
identifier func;
@@

static const struct drm_plane_helper_funcs helpers = {
...,
.atomic_check = func,
...,
};

@@
struct drm_plane_helper_funcs *FUNCS;
identifier f;
identifier dev;
identifier plane, plane_state, state;
@@

f(struct drm_device *dev, struct drm_atomic_state *state)
{
<+...
- FUNCS->atomic_check(plane, plane_state)
+ FUNCS->atomic_check(plane, state)
...+>
}

@ ignores_new_state @
identifier plane_atomic_func.func;
identifier plane, new_plane_state;
@@

func(struct drm_plane *plane, struct drm_plane_state *new_plane_state)
{
... when != new_plane_state
}

@ adds_new_state depends on plane_atomic_func && !ignores_new_state @
identifier plane_atomic_func.func;
identifier plane, new_plane_state;
@@

func(struct drm_plane *plane, struct drm_plane_state *new_plane_state)
{
+ struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state, plane);
...
}

@ depends on plane_atomic_func @
identifier plane_atomic_func.func;
identifier plane, new_plane_state;
@@

func(struct drm_plane *plane,
- struct drm_plane_state *new_plane_state
+ struct drm_atomic_state *state
)
{ ... }

@ include depends on adds_new_state @
@@

#include <drm/drm_atomic.h>

@ no_include depends on !include && adds_new_state @
@@

+ #include <drm/drm_atomic.h>
#include <drm/...>

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-4-maxime@cerno.tech

show more ...

drm: Rename plane atomic_check state names

Most drivers call the argument to the plane atomic_check hook simply
state, which is going to conflict with the global atomic state in a
later rework. Let'

drm: Rename plane atomic_check state names

Most drivers call the argument to the plane atomic_check hook simply
state, which is going to conflict with the global atomic state in a
later rework. Let's rename it to new_plane_state (or new_state depending
on the convention used in the driver).

This was done using the coccinelle script below, and built tested:

@ plane_atomic_func @
identifier helpers;
identifier func;
@@

static const struct drm_plane_helper_funcs helpers = {
.atomic_check = func,
};

@ has_old_state @
identifier plane_atomic_func.func;
identifier plane;
expression e;
symbol old_state;
symbol state;
@@

func(struct drm_plane *plane, struct drm_plane_state *state)
{
...
struct drm_plane_state *old_state = e;
...
}

@ depends on has_old_state @
identifier plane_atomic_func.func;
identifier plane;
symbol old_state;
@@

func(struct drm_plane *plane,
- struct drm_plane_state *state
+ struct drm_plane_state *new_state
)
{
<+...
- state
+ new_state
...+>
}

@ has_state @
identifier plane_atomic_func.func;
identifier plane;
symbol state;
@@

func(struct drm_plane *plane, struct drm_plane_state *state)
{
...
}

@ depends on has_state @
identifier plane_atomic_func.func;
identifier plane;
symbol old_state;
@@

func(struct drm_plane *plane,
- struct drm_plane_state *state
+ struct drm_plane_state *new_plane_state
)
{
<+...
- state
+ new_plane_state
...+>
}

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-2-maxime@cerno.tech

show more ...

treewide: Use fallthrough pseudo-keyword

Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through mar

treewide: Use fallthrough pseudo-keyword

Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through markings when it is the case.

[1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through

Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>

show more ...

drm/fsl-dcu: drop use of drmP.h

Drop use of the deprecated drmP.h header file.
Fix fallout.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Stefan Agner <stefan@agner.ch>
Acked-by: Emil Ve

drm/fsl-dcu: drop use of drmP.h

Drop use of the deprecated drmP.h header file.
Fix fallout.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Stefan Agner <stefan@agner.ch>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Cc: Alison Wang <alison.wang@nxp.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190630061922.7254-9-sam@ravnborg.org

show more ...

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of th

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 3029 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

drm: Split out drm_probe_helper.h

Having the probe helper stuff (which pretty much everyone needs) in
the drm_crtc_helper.h file (which atomic drivers should never need) is
confusing. Split them out

drm: Split out drm_probe_helper.h

Having the probe helper stuff (which pretty much everyone needs) in
the drm_crtc_helper.h file (which atomic drivers should never need) is
confusing. Split them out.

To make sure I actually achieved the goal here I went through all
drivers. And indeed, all atomic drivers are now free of
drm_crtc_helper.h includes.

v2: Make it compile. There was so much compile fail on arm drivers
that I figured I'll better not include any of the acks on v1.

v3: Massive rebase because i915 has lost a lot of drmP.h includes, but
not all: Through drm_crtc_helper.h > drm_modeset_helper.h -> drmP.h
there was still one, which this patch largely removes. Which means
rolling out lots more includes all over.

This will also conflict with ongoing drmP.h cleanup by others I
expect.

v3: Rebase on top of atomic bochs.

v4: Review from Laurent for bridge/rcar/omap/shmob/core bits:
- (re)move some of the added includes, use the better include files in
other places (all suggested from Laurent adopted unchanged).
- sort alphabetically

v5: Actually try to sort them, and while at it, sort all the ones I
touch.

v6: Rebase onto i915 changes.

v7: Rebase once more.

Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: CK Hu <ck.hu@mediatek.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: virtualization@lists.linux-foundation.org
Cc: etnaviv@lists.freedesktop.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: intel-gfx@lists.freedesktop.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-amlogic@lists.infradead.org
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: spice-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Cc: linux-renesas-soc@vger.kernel.org
Cc: linux-rockchip@lists.infradead.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-tegra@vger.kernel.org
Cc: xen-devel@lists.xen.org
Link: https://patchwork.freedesktop.org/patch/msgid/20190117210334.13234-1-daniel.vetter@ffwll.ch

show more ...

drm: Plumb modifiers through plane init

This is the plumbing for supporting fb modifiers on planes. Modifiers
have already been introduced to some extent, but this series will extend
this to allow q

drm: Plumb modifiers through plane init

This is the plumbing for supporting fb modifiers on planes. Modifiers
have already been introduced to some extent, but this series will extend
this to allow querying modifiers per plane. Based on this, the client to
enable optimal modifications for framebuffers.

This patch simply allows the DRM drivers to initialize their list of
supported modifiers upon initializing the plane.

v2: A minor addition from Daniel

v3:
* Updated commit message
* s/INVALID/DRM_FORMAT_MOD_INVALID (Liviu)
* Remove some excess newlines (Liviu)
* Update comment for > 64 modifiers (Liviu)

v4: Minor comment adjustments (Liviu)

v5: Some new platforms added due to rebase

v6: Add some missed plane inits (or maybe they're new - who knows at
this point) (Daniel)

Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Daniel Stone <daniels@collabora.com> (v2)
Reviewed-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Daniel Stone <daniels@collabora.com>

show more ...

drm: Nuke fb->pixel_format

Replace uses of fb->pixel_format with fb->format->format.
Less duplicated information is a good thing.

Note that coccinelle failed to eliminate the
"/* fourcc format */"

drm: Nuke fb->pixel_format

Replace uses of fb->pixel_format with fb->format->format.
Less duplicated information is a good thing.

Note that coccinelle failed to eliminate the
"/* fourcc format */" comment from drm_framebuffer.h, so I had
to do that part manually.

@@
struct drm_framebuffer *FB;
expression E;
@@
drm_helper_mode_fill_fb_struct(...) {
...
- FB->pixel_format = E;
...
}

@@
struct drm_framebuffer *FB;
expression E;
@@
i9xx_get_initial_plane_config(...) {
...
- FB->pixel_format = E;
...
}

@@
struct drm_framebuffer *FB;
expression E;
@@
ironlake_get_initial_plane_config(...) {
...
- FB->pixel_format = E;
...
}

@@
struct drm_framebuffer *FB;
expression E;
@@
skylake_get_initial_plane_config(...) {
...
- FB->pixel_format = E;
...
}

@@
struct drm_framebuffer *a;
struct drm_framebuffer b;
@@
(
- a->pixel_format
+ a->format->format
|
- b.pixel_format
+ b.format->format
)

@@
struct drm_plane_state *a;
struct drm_plane_state b;
@@
(
- a->fb->pixel_format
+ a->fb->format->format
|
- b.fb->pixel_format
+ b.fb->format->format
)

@@
struct drm_crtc *CRTC;
@@
(
- CRTC->primary->fb->pixel_format
+ CRTC->primary->fb->format->format
|
- CRTC->primary->state->fb->pixel_format
+ CRTC->primary->state->fb->format->format
)

@@
struct drm_mode_set *set;
@@
(
- set->fb->pixel_format
+ set->fb->format->format
|
- set->crtc->primary->fb->pixel_format
+ set->crtc->primary->fb->format->format
)

@@
@@
struct drm_framebuffer {
...
- uint32_t pixel_format;
...
};

v2: Fix commit message (Laurent)
Rebase due to earlier removal of many fb->pixel_format uses,
including the 'fb->format = drm_format_info(fb->format->format);'
snafu
v3: Adjusted the semantic patch a bit and regenerated due to code
changes

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1)
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1481751175-18463-1-git-send-email-ville.syrjala@linux.intel.com

show more ...

drm/fsl-dcu: update all registers on flush

Use the UPDATE_MODE READREG bit to initiate a register transfer
on flush. This makes sure that we flush all registers only once
for all planes.

Signed-off

drm/fsl-dcu: update all registers on flush

Use the UPDATE_MODE READREG bit to initiate a register transfer
on flush. This makes sure that we flush all registers only once
for all planes.

Signed-off-by: Stefan Agner <stefan@agner.ch>

show more ...

drm/fsl-dcu: do not transfer registers on plane init

There is no need to explicitly initiate a register transfer and
turn off the DCU after initializing the plane registers. In fact,
this is harmful

drm/fsl-dcu: do not transfer registers on plane init

There is no need to explicitly initiate a register transfer and
turn off the DCU after initializing the plane registers. In fact,
this is harmful and leads to unnecessary flickers if the DCU has
been left on by the bootloader.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Tested-By: Meng Yi <meng.yi@nxp.com>

show more ...

drm: Don't implement empty prepare_fb()/cleanup_fb()

The plane .prepare_fb() and .cleanup_fb() helpers are optional, there's
no need to implement empty stubs, and no need to explicitly set the
funct

drm: Don't implement empty prepare_fb()/cleanup_fb()

The plane .prepare_fb() and .cleanup_fb() helpers are optional, there's
no need to implement empty stubs, and no need to explicitly set the
function pointers to NULL either.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
[danvet: Resolved conflicts with Chris' patch.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

show more ...

drm: Allow drivers to modify plane_state in prepare_fb/cleanup_fb

The drivers have to modify the atomic plane state during the prepare_fb
callback so they track allocations, reservations and depende

drm: Allow drivers to modify plane_state in prepare_fb/cleanup_fb

The drivers have to modify the atomic plane state during the prepare_fb
callback so they track allocations, reservations and dependencies for
this atomic operation involving this fb. In particular, how else do we
set the plane->fence from the framebuffer!

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20160818180017.20508-1-chris@chris-wilson.co.uk

show more ...

drm/fsl-dcu: move layer initialization to plane file

Move the initialization code for layers into a separate function
in the plane file. This allows to reuse the function on resume.
Also move it at

drm/fsl-dcu: move layer initialization to plane file

Move the initialization code for layers into a separate function
in the plane file. This allows to reuse the function on resume.
Also move it at the very beginning which may not matter but makes
logically much more sense.

Signed-off-by: Stefan Agner <stefan@agner.ch>

show more ...

drm/fsl-dcu: fix alpha blending

Fix alpha blending by enabling alpha blending for the whole frame if
a color mode with alpha channel is selected (DRM_FORMAT_ARGB*). Also
support color modes without

drm/fsl-dcu: fix alpha blending

Fix alpha blending by enabling alpha blending for the whole frame if
a color mode with alpha channel is selected (DRM_FORMAT_ARGB*). Also
support color modes without alpha channel (DRM_FORMAT_XRGB*) by just
not enabling alpha blending on layer level.

Signed-off-by: Stefan Agner <stefan@agner.ch>

show more ...

drm/fsl-dcu: avoid memory leak on errors

Improve error handling during CRTC initialization. Especially avoid
memory leaks in the primary plane initialization error path.

Signed-off-by: Stefan Agner

drm/fsl-dcu: avoid memory leak on errors

Improve error handling during CRTC initialization. Especially avoid
memory leaks in the primary plane initialization error path.

Signed-off-by: Stefan Agner <stefan@agner.ch>

show more ...

drm/fsl-dcu: remove regmap return value checks

It is not common to do regmap return value checks, especially not
for memory mapped device. We can rule out most error returns since
the conditions are

drm/fsl-dcu: remove regmap return value checks

It is not common to do regmap return value checks, especially not
for memory mapped device. We can rule out most error returns since
the conditions are static and we know they are ok (e.g. offset
aligned to register stride). Also without proper error handling
they are not really valuable for the user. Hence remove most of
them.

The check in the interrupt handler is worth keeping since a
volatile register won't be readable in case register caching is
still enabled.

Signed-off-by: Stefan Agner <stefan@agner.ch>

show more ...