drm: Update file owner during use

[ Upstream commit 1c7a387ffef894b1ab3942f0482dac7a6e0a909c ]

With the typical model where the display server opens the file descriptor
and then hands it over to th

drm: Update file owner during use

[ Upstream commit 1c7a387ffef894b1ab3942f0482dac7a6e0a909c ]

With the typical model where the display server opens the file descriptor
and then hands it over to the client(*), we were showing stale data in
debugfs.

Fix it by updating the drm_file->pid on ioctl access from a different
process.

The field is also made RCU protected to allow for lockless readers. Update
side is protected with dev->filelist_mutex.

Before:

$ cat /sys/kernel/debug/dri/0/clients
command pid dev master a uid magic
Xorg 2344 0 y y 0 0
Xorg 2344 0 n y 0 2
Xorg 2344 0 n y 0 3
Xorg 2344 0 n y 0 4

After:

$ cat /sys/kernel/debug/dri/0/clients
command tgid dev master a uid magic
Xorg 830 0 y y 0 0
xfce4-session 880 0 n y 0 1
xfwm4 943 0 n y 0 2
neverball 1095 0 n y 0 3

*)
More detailed and historically accurate description of various handover
implementation kindly provided by Emil Velikov:

"""
The traditional model, the server was the orchestrator managing the
primary device node. From the fd, to the master status and
authentication. But looking at the fd alone, this has varied across
the years.

IIRC in the DRI1 days, Xorg (libdrm really) would have a list of open
fd(s) and reuse those whenever needed, DRI2 the client was responsible
for open() themselves and with DRI3 the fd was passed to the client.

Around the inception of DRI3 and systemd-logind, the latter became
another possible orchestrator. Whereby Xorg and Wayland compositors
could ask it for the fd. For various reasons (hysterical and genuine
ones) Xorg has a fallback path going the open(), whereas Wayland
compositors are moving to solely relying on logind... some never had
fallback even.

Over the past few years, more projects have emerged which provide
functionality similar (be that on API level, Dbus, or otherwise) to
systemd-logind.
"""

v2:
* Fixed typo in commit text and added a fine historical explanation
from Emil.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Tested-by: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230621094824.2348732-1-tvrtko.ursulin@linux.intel.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Stable-dep-of: 5a6c9a05e55c ("drm: Fix FD ownership check in drm_master_check_perm()")
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

drm/bridge: Add debugfs print for bridge chains

DRM bridges are not visible to the userspace and it may not be
immediately clear if the chain is somehow constructed incorrectly. I
have had two separ

drm/bridge: Add debugfs print for bridge chains

DRM bridges are not visible to the userspace and it may not be
immediately clear if the chain is somehow constructed incorrectly. I
have had two separate instances of a bridge driver failing to do a
drm_bridge_attach() call, resulting in the bridge connector not being
part of the chain. In some situations this doesn't seem to cause issues,
but it will if DRM_BRIDGE_ATTACH_NO_CONNECTOR flag is used.

Add a debugfs file to print the bridge chains. For me, on this TI AM62
based platform, I get the following output:

encoder[39]
bridge[0] type: 0, ops: 0x0
bridge[1] type: 0, ops: 0x0, OF: /bus@f0000/i2c@20000000/dsi@e:toshiba,tc358778
bridge[2] type: 0, ops: 0x3, OF: /bus@f0000/i2c@20010000/hdmi@48:lontium,lt8912b
bridge[3] type: 11, ops: 0x7, OF: /hdmi-connector:hdmi-connector

Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230802-drm-bridge-chain-debugfs-v4-1-7e3ae3d137c0@ideasonboard.com

show more ...

drm: debugfs: Silence warning from cast

Casting a pointer to an integer of a different size generates a warning
from the compiler. First cast the pointer to a pointer-sized type to
keep the compiler

drm: debugfs: Silence warning from cast

Casting a pointer to an integer of a different size generates a warning
from the compiler. First cast the pointer to a pointer-sized type to
keep the compiler happy.

Fixes: 4f66feeab173 ("drm: debugfs: provide infrastructure to dump a DRM GPU VA space")
Reviewed-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/010b58cd-1225-02f7-33f0-c678e5cd349d@arm.com

show more ...

drm: debugfs: provide infrastructure to dump a DRM GPU VA space

This commit adds a function to dump a DRM GPU VA space and a macro for
drivers to register the struct drm_info_list 'gpuvas' entry.

M

drm: debugfs: provide infrastructure to dump a DRM GPU VA space

This commit adds a function to dump a DRM GPU VA space and a macro for
drivers to register the struct drm_info_list 'gpuvas' entry.

Most likely, most drivers might maintain one DRM GPU VA space per struct
drm_file, but there might also be drivers not having a fixed relation
between DRM GPU VA spaces and a DRM core infrastructure, hence we need the
indirection via the driver iterating it's maintained DRM GPU VA spaces.

Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230720001443.2380-3-dakr@redhat.com

show more ...

drm: Track clients by tgid and not tid

Thread group id (aka pid from userspace point of view) is a more
interesting thing to show as an owner of a DRM fd, so track and show that
instead of the threa

drm: Track clients by tgid and not tid

Thread group id (aka pid from userspace point of view) is a more
interesting thing to show as an owner of a DRM fd, so track and show that
instead of the thread id.

In the next patch we will make the owner updated post file descriptor
handover, which will also be tgid based to avoid ping-pong when multiple
threads access the fd.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230314141904.1210824-2-tvrtko.ursulin@linux.intel.com

show more ...

drm/debugfs: use octal permissions instead of symbolic permissions

Currently, debugfs functions are using symbolic macros as permission
bits, but checkpatch reinforces permission bits in the octal f

drm/debugfs: use octal permissions instead of symbolic permissions

Currently, debugfs functions are using symbolic macros as permission
bits, but checkpatch reinforces permission bits in the octal form, as
they are more readable and easier to understand [1]. Moreover, using
the symbolic macro S_IFREG is redundant.

Therefore, use octal permission bits in all debugfs functions.

[1] https://docs.kernel.org/dev-tools/checkpatch.html#permissions

Suggested-by: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20230105193039.287677-1-mcanal@igalia.com

show more ...

drm/debugfs: create debugfs late register functions

Although the device-centered debugfs functions can track requests for
the addition of DRM debugfs files at any time and have them added all
at onc

drm/debugfs: create debugfs late register functions

Although the device-centered debugfs functions can track requests for
the addition of DRM debugfs files at any time and have them added all
at once during drm_dev_register(), they are not able to create debugfs
files for modeset components, as they are registered after the primary
and the render drm_minor are registered.

So, create a drm_debugfs_late_register() function, which is responsible
for dealing with the creation of all the debugfs files for modeset
components at once. Therefore, the functions drm_debugfs_add_file()
and drm_debugfs_add_files() can be used in late_register hooks.

Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20221219120621.15086-4-mcanal@igalia.com

show more ...

drm: use new debugfs device-centered functions on DRM core files

Replace the use of drm_debugfs_create_files() with the new
drm_debugfs_add_files() function in all DRM core files, centering the
debu

drm: use new debugfs device-centered functions on DRM core files

Replace the use of drm_debugfs_create_files() with the new
drm_debugfs_add_files() function in all DRM core files, centering the
debugfs files management on the drm_device instead of drm_minor.

Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20221219120621.15086-3-mcanal@igalia.com

show more ...

drm/debugfs: create device-centered debugfs functions

Introduce the ability to track requests for the addition of DRM debugfs
files at any time and have them added all at once during
drm_dev_registe

drm/debugfs: create device-centered debugfs functions

Introduce the ability to track requests for the addition of DRM debugfs
files at any time and have them added all at once during
drm_dev_register().

Drivers can add DRM debugfs files to a device-managed list and, during
drm_dev_register(), all added files will be created at once.

Now, the drivers can use the functions drm_debugfs_add_file() and
drm_debugfs_add_files() to create DRM debugfs files instead of using the
drm_debugfs_create_files() function.

Co-developed-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20221219120621.15086-2-mcanal@igalia.com

show more ...

drm/edid: abstract debugfs override EDID show better

Add a function to dump the override EDID in debugfs. This hides the
override EDID management better in drm_edid.c.

Signed-off-by: Jani Nikula <j

drm/edid: abstract debugfs override EDID show better

Add a function to dump the override EDID in debugfs. This hides the
override EDID management better in drm_edid.c.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/74defa7b595f51e6c1f2eacd9c799d567d29f053.1666614699.git.jani.nikula@intel.com

show more ...

drm/edid: Handle EDID 1.4 range descriptor h/vfreq offsets

EDID 1.4 introduced some extra flags in the range
descriptor to support min/max h/vfreq >= 255. Consult them
to correctly parse the vfreq l

drm/edid: Handle EDID 1.4 range descriptor h/vfreq offsets

EDID 1.4 introduced some extra flags in the range
descriptor to support min/max h/vfreq >= 255. Consult them
to correctly parse the vfreq limits.

Note that some combinations of the flags are documented
as "reserved" (as are some other values in the descriptor)
but explicitly checking for those doesn't seem particularly
worthwile since we end up with bogus results whether we
decode them or not.

v2: Increase the storage to u16 to make it work (Jani)
Note the "reserved" values situation (Jani)
v3: Document the EDID version number in the defines
Drop some bogus (u8) casts

Cc: stable@vger.kernel.org
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6519
References: https://gitlab.freedesktop.org/drm/intel/-/issues/6484
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220826213501.31490-2-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>

show more ...

drm/edid: abstract debugfs override EDID set/reset

Add functions drm_edid_override_set() and drm_edid_override_reset() to
support "edid_override" connector debugfs, and to hide the details about
it

drm/edid: abstract debugfs override EDID set/reset

Add functions drm_edid_override_set() and drm_edid_override_reset() to
support "edid_override" connector debugfs, and to hide the details about
it in drm_edid.c. No functional changes at this time.

Also note in the connector.override_edid flag kernel-doc that this is
only supposed to be modified by the code doing debugfs EDID override
handling. Currently, it is still being modified by amdgpu in
create_eml_sink() and handle_edid_mgmt() for reasons unknown. This was
added in commit 4562236b3bc0 ("drm/amd/dc: Add dc display driver (v2)")
and later moved to amdgpu_dm.c in commit e7b07ceef2a6 ("drm/amd/display:
Merge amdgpu_dm_types and amdgpu_dm").

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8f6b4001630cafac5f44aa5913429ac9979743d2.1656494768.git.jani.nikula@intel.com

show more ...

drm/debug: Expose connector's max supported bpc via debugfs

It's useful to know the connector's max supported bpc for IGT
testing. Expose it via a debugfs file on the connector "output_bpc".

Exampl

drm/debug: Expose connector's max supported bpc via debugfs

It's useful to know the connector's max supported bpc for IGT
testing. Expose it via a debugfs file on the connector "output_bpc".

Example: cat /sys/kernel/debug/dri/0/DP-1/output_bpc

V2:
* Fix typo in comments (Harry)

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Bhanuprakash Modem <bhanuprakash.modem@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220519095149.3560034-2-bhanuprakash.modem@intel.com

show more ...

drm: Plumb debugfs_init through to panels

We'd like panels to be able to add things to debugfs underneath the
connector's directory. Let's plumb it through. A panel will be able to
put things in a "

drm: Plumb debugfs_init through to panels

We'd like panels to be able to add things to debugfs underneath the
connector's directory. Let's plumb it through. A panel will be able to
put things in a "panel" directory under the connector's
directory. Note that debugfs is not ABI and so it's always possible
that the location that the panel gets for its debugfs could change in
the future.

NOTE: this currently only works if you're using a modern
architecture. Specifically the plumbing relies on _both_
drm_bridge_connector and drm_panel_bridge. If you're not using one or
both of these things then things won't be plumbed through.

As a side effect of this change, drm_bridges can also get callbacks to
put stuff underneath the connector's debugfs directory. At the moment
all bridges in the chain have their debugfs_init() called with the
connector's root directory.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220204161245.v2.2.Ib0bd5346135cbb0b63006b69b61d4c8af6484740@changeid

show more ...

drm: avoid blocking in drm_clients_info's rcu section

Inside drm_clients_info, the rcu_read_lock is held to lock
pid_task()->comm. However, within this protected section, a call to
drm_is_current_ma

drm: avoid blocking in drm_clients_info's rcu section

Inside drm_clients_info, the rcu_read_lock is held to lock
pid_task()->comm. However, within this protected section, a call to
drm_is_current_master is made, which involves a mutex lock in a future
patch. However, this is illegal because the mutex lock might block
while in the RCU read-side critical section.

Since drm_is_current_master isn't protected by rcu_read_lock, we avoid
this by moving it out of the RCU critical section.

The following report came from intel-gfx ci's
igt@debugfs_test@read_all_entries testcase:

=============================
[ BUG: Invalid wait context ]
5.13.0-CI-Patchwork_20515+ #1 Tainted: G W
-----------------------------
debugfs_test/1101 is trying to lock:
ffff888132d901a8 (&dev->master_mutex){+.+.}-{3:3}, at:
drm_is_current_master+0x1e/0x50
other info that might help us debug this:
context-{4:4}
3 locks held by debugfs_test/1101:
#0: ffff88810fdffc90 (&p->lock){+.+.}-{3:3}, at:
seq_read_iter+0x53/0x3b0
#1: ffff888132d90240 (&dev->filelist_mutex){+.+.}-{3:3}, at:
drm_clients_info+0x63/0x2a0
#2: ffffffff82734220 (rcu_read_lock){....}-{1:2}, at:
drm_clients_info+0x1b1/0x2a0
stack backtrace:
CPU: 8 PID: 1101 Comm: debugfs_test Tainted: G W
5.13.0-CI-Patchwork_20515+ #1
Hardware name: Intel Corporation CometLake Client Platform/CometLake S
UDIMM (ERB/CRB), BIOS CMLSFWR1.R00.1263.D00.1906260926 06/26/2019
Call Trace:
dump_stack+0x7f/0xad
__lock_acquire.cold.78+0x2af/0x2ca
lock_acquire+0xd3/0x300
? drm_is_current_master+0x1e/0x50
? __mutex_lock+0x76/0x970
? lockdep_hardirqs_on+0xbf/0x130
__mutex_lock+0xab/0x970
? drm_is_current_master+0x1e/0x50
? drm_is_current_master+0x1e/0x50
? drm_is_current_master+0x1e/0x50
drm_is_current_master+0x1e/0x50
drm_clients_info+0x107/0x2a0
seq_read_iter+0x178/0x3b0
seq_read+0x104/0x150
full_proxy_read+0x4e/0x80
vfs_read+0xa5/0x1b0
ksys_read+0x5a/0xd0
do_syscall_64+0x39/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xae

Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210712043508.11584-3-desmondcheongzx@gmail.com

show more ...

drm: avoid blocking in drm_clients_info's rcu section

[ Upstream commit 5eff9585de220cdd131237f5665db5e6c6bdf590 ]

Inside drm_clients_info, the rcu_read_lock is held to lock
pid_task()->comm. Howev

drm: avoid blocking in drm_clients_info's rcu section

[ Upstream commit 5eff9585de220cdd131237f5665db5e6c6bdf590 ]

Inside drm_clients_info, the rcu_read_lock is held to lock
pid_task()->comm. However, within this protected section, a call to
drm_is_current_master is made, which involves a mutex lock in a future
patch. However, this is illegal because the mutex lock might block
while in the RCU read-side critical section.

Since drm_is_current_master isn't protected by rcu_read_lock, we avoid
this by moving it out of the RCU critical section.

The following report came from intel-gfx ci's
igt@debugfs_test@read_all_entries testcase:

=============================
[ BUG: Invalid wait context ]
5.13.0-CI-Patchwork_20515+ #1 Tainted: G W
-----------------------------
debugfs_test/1101 is trying to lock:
ffff888132d901a8 (&dev->master_mutex){+.+.}-{3:3}, at:
drm_is_current_master+0x1e/0x50
other info that might help us debug this:
context-{4:4}
3 locks held by debugfs_test/1101:
#0: ffff88810fdffc90 (&p->lock){+.+.}-{3:3}, at:
seq_read_iter+0x53/0x3b0
#1: ffff888132d90240 (&dev->filelist_mutex){+.+.}-{3:3}, at:
drm_clients_info+0x63/0x2a0
#2: ffffffff82734220 (rcu_read_lock){....}-{1:2}, at:
drm_clients_info+0x1b1/0x2a0
stack backtrace:
CPU: 8 PID: 1101 Comm: debugfs_test Tainted: G W
5.13.0-CI-Patchwork_20515+ #1
Hardware name: Intel Corporation CometLake Client Platform/CometLake S
UDIMM (ERB/CRB), BIOS CMLSFWR1.R00.1263.D00.1906260926 06/26/2019
Call Trace:
dump_stack+0x7f/0xad
__lock_acquire.cold.78+0x2af/0x2ca
lock_acquire+0xd3/0x300
? drm_is_current_master+0x1e/0x50
? __mutex_lock+0x76/0x970
? lockdep_hardirqs_on+0xbf/0x130
__mutex_lock+0xab/0x970
? drm_is_current_master+0x1e/0x50
? drm_is_current_master+0x1e/0x50
? drm_is_current_master+0x1e/0x50
drm_is_current_master+0x1e/0x50
drm_clients_info+0x107/0x2a0
seq_read_iter+0x178/0x3b0
seq_read+0x104/0x150
full_proxy_read+0x4e/0x80
vfs_read+0xa5/0x1b0
ksys_read+0x5a/0xd0
do_syscall_64+0x39/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xae

Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210712043508.11584-3-desmondcheongzx@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

drm/debug: Expose connector VRR monitor range via debugfs

[Why]
It's useful to know the min and max vrr range for IGT testing.

[How]
Expose the min and max vfreq for the connector via a debugfs fil

drm/debug: Expose connector VRR monitor range via debugfs

[Why]
It's useful to know the min and max vrr range for IGT testing.

[How]
Expose the min and max vfreq for the connector via a debugfs file
on the connector, "vrr_range".

Example usage: cat /sys/kernel/debug/dri/0/DP-1/vrr_range

v2:
* Fix the typo in max_vfreq (Manasi)
* Change the name of node to i915_vrr_info so we can add
other vrr info for more debug info (Manasi)
* Change the VRR capable to display Yes or No (Manasi)
* Fix indentation checkpatch errors (Manasi)
v3:
* Remove the unnecessary debug print (Manasi)
v4:
* Rebase
v5:
* Rename to vrr_range to match AMD debugfs
v6:
* Rebase (manasi)
v7:
* Fix cmpilation due to rebase
v8:
* Move debugfs node creation logic to DRM (Emil)
* Remove AMD specific logic (Emil)
v9:
* Separate patch for removal of AMD specific logic (Manasi)

Signed-off-by: Bhanuprakash Modem <bhanuprakash.modem@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <harry.wentland@amd.com>
CC: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200622142519.16214-3-bhanuprakash.modem@intel.com

show more ...

drm/debugfs: fix plain echo to connector "force" attribute

Using plain echo to set the "force" connector attribute fails with
-EINVAL, because echo appends a newline to the output.

Replace strcmp w

drm/debugfs: fix plain echo to connector "force" attribute

Using plain echo to set the "force" connector attribute fails with
-EINVAL, because echo appends a newline to the output.

Replace strcmp with sysfs_streq to also accept strings that end with a
newline.

v2: use sysfs_streq instead of stripping trailing whitespace

Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170817104307.17124-1-m.tretter@pengutronix.de

show more ...

drm: convert .debugfs_init() hook to return void.

As a result of commit 987d65d01356 (drm: debugfs: make
drm_debugfs_create_files() never fail) and changes to various debugfs
functions in drm/core a

drm: convert .debugfs_init() hook to return void.

As a result of commit 987d65d01356 (drm: debugfs: make
drm_debugfs_create_files() never fail) and changes to various debugfs
functions in drm/core and across various drivers, there is no need for
the drm_driver.debugfs_init() hook to have a return value. Therefore,
declare it as void.

This also includes refactoring all users of the .debugfs_init() hook to
return void across the subsystem.

v2: include changes to the hook and drivers that use it in one patch to
prevent driver breakage and enable individual successful compilation of
this change.

References: https://lists.freedesktop.org/archives/dri-devel/2020-February/257183.html
Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200310133121.27913-18-wambui.karugax@gmail.com

show more ...

drm/debugfs: remove checks for return value of drm_debugfs functions.

Since 987d65d01356 (drm: debugfs: make drm_debugfs_create_files() never
fail), there is no need to check the return value of
drm

drm/debugfs: remove checks for return value of drm_debugfs functions.

Since 987d65d01356 (drm: debugfs: make drm_debugfs_create_files() never
fail), there is no need to check the return value of
drm_debugfs_create_files(). Therefore, remove remove unnecessary checks
and error handling statement blocks for its return value.

These changes also enable changing drm_debugfs_create_files() to return
void.

Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200310133121.27913-17-wambui.karugax@gmail.com

show more ...

drm/debugfs: also take per device driver features into account

Use drm_core_check_all_features() to ensure both the driver features and
the per-device driver features are taken into account when reg

drm/debugfs: also take per device driver features into account

Use drm_core_check_all_features() to ensure both the driver features and
the per-device driver features are taken into account when registering
debugfs files.

v3:
- files[i].driver_features == 0 actually means "don't care"

v2:
- use drm_core_check_all_features()

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200123124801.14958-2-jani.nikula@intel.com

show more ...

drm: debugfs: make drm_debugfs_create_files() never fail

As stated before, there is no need to care if a debugfs function
succeeds or not, and no code logic in the kernel should ever change
based on

drm: debugfs: make drm_debugfs_create_files() never fail

As stated before, there is no need to care if a debugfs function
succeeds or not, and no code logic in the kernel should ever change
based on a debugfs function return value, so make
drm_debugfs_create_files() never fail. If it encounters an
odd/rare/impossible error (i.e. out of memory, or a duplicate debugfs
filename to be created), just keep on moving as if nothing improper had
happened.

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190614095110.3716-2-gregkh@linuxfoundation.org

show more ...

drm: no need to check return value of debugfs_create functions

When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic shou

drm: no need to check return value of debugfs_create functions

When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.

Because there is no need to check these functions, a number of local
functions can be made to return void to simplify things as nothing can
fail.

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613133439.GA6715@kroah.com

show more ...

drm: drop use of drmP.h in drm/*

The use of the drmP.h header file is deprecated.
Remove use from all files in drm/*
so people do not look there and follow a bad example.

Build tested allyesconfig,

drm: drop use of drmP.h in drm/*

The use of the drmP.h header file is deprecated.
Remove use from all files in drm/*
so people do not look there and follow a bad example.

Build tested allyesconfig,allmodconfig on x86, arm etc.
Including alpha that is as always more challenging than
the rest.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Link: https://patchwork.freedesktop.org/patch/msgid/20190526173535.32701-8-sam@ravnborg.org

show more ...

drm: Merge drm_info.c into drm_debugfs.c

Ever since

commit cb6458f97b53d7f73043206c18014b3ca63ac345
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Thu Aug 8 15:41:34 2013 +0200

drm: re

drm: Merge drm_info.c into drm_debugfs.c

Ever since

commit cb6458f97b53d7f73043206c18014b3ca63ac345
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Thu Aug 8 15:41:34 2013 +0200

drm: remove procfs code, take 2

Having the code shared between procfs and debugfs in the separate
drm_info.c file stopped making sense. Merge them.

Noticed because Lyude asked some questions on irc about why we even
have drm_info_node and I remember this old story.

Cc: Lyude Paul <lyude@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181121213510.31260-1-daniel.vetter@ffwll.ch

show more ...