dmaengine: xilinx: xdma: Fix typo

Probably a copy/paste error with the previous block, here we are
actually managing C2H IRQs.

Fixes: 17ce252266c7 ("dmaengine: xilinx: xdma: Add xilinx xdma driver"

dmaengine: xilinx: xdma: Fix typo

Probably a copy/paste error with the previous block, here we are
actually managing C2H IRQs.

Fixes: 17ce252266c7 ("dmaengine: xilinx: xdma: Add xilinx xdma driver")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20230731101442.792514-3-miquel.raynal@bootlin.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

show more ...

dmaengine: xilinx: xdma: Fix interrupt vector setting

A couple of hardware registers need to be set to reflect which
interrupts have been allocated to the device. Each register is 32-bit
wide and ca

dmaengine: xilinx: xdma: Fix interrupt vector setting

A couple of hardware registers need to be set to reflect which
interrupts have been allocated to the device. Each register is 32-bit
wide and can receive four 8-bit values. If we provide any other interrupt
number than four, the irq_num variable will never be 0 within the while
check and the while block will loop forever.

There is an easy way to prevent this: just break the for loop
when we reach "irq_num == 0", which anyway means all interrupts have
been processed.

Cc: stable@vger.kernel.org
Fixes: 17ce252266c7 ("dmaengine: xilinx: xdma: Add xilinx xdma driver")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://lore.kernel.org/r/20230731101442.792514-2-miquel.raynal@bootlin.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

show more ...

dmaengine: xilinx: xdma: Fix Judgment of the return value

Fix: make IS_ERR() judge the devm_ioremap_resource() function return.

Fixes: 17ce252266c7 ("dmaengine: xilinx: xdma: Add xilinx xdma driver

dmaengine: xilinx: xdma: Fix Judgment of the return value

Fix: make IS_ERR() judge the devm_ioremap_resource() function return.

Fixes: 17ce252266c7 ("dmaengine: xilinx: xdma: Add xilinx xdma driver")
Signed-off-by: Minjie Du <duminjie@vivo.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/20230705113912.16247-1-duminjie@vivo.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

show more ...

dmaengine: xilinx: xdma: Fix some kernel-doc comments

Make the description of @xdma_chan to @xchan to silence the warnings:

drivers/dma/xilinx/xdma.c:283: warning: Function parameter or member 'xch

dmaengine: xilinx: xdma: Fix some kernel-doc comments

Make the description of @xdma_chan to @xchan to silence the warnings:

drivers/dma/xilinx/xdma.c:283: warning: Function parameter or member 'xchan' not described in 'xdma_xfer_start'
drivers/dma/xilinx/xdma.c:283: warning: Excess function parameter 'xdma_chan' description in 'xdma_xfer_start'

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=4051
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Acked-by: Peter Korsgaard <peter@korsgaard.com>
Link: https://lore.kernel.org/r/20230214010344.5354-1-yang.lee@linux.alibaba.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

show more ...

dmaengine: xilinx: xdma: Add user logic interrupt support

The Xilinx DMA/Bridge Subsystem for PCIe (XDMA) provides up to 16 user
interrupt wires to user logic that generate interrupts to the host.
T

dmaengine: xilinx: xdma: Add user logic interrupt support

The Xilinx DMA/Bridge Subsystem for PCIe (XDMA) provides up to 16 user
interrupt wires to user logic that generate interrupts to the host.
This patch adds APIs to enable/disable user logic interrupt for a given
interrupt wire index.

Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Sonal Santan <sonal.santan@amd.com>
Signed-off-by: Max Zhen <max.zhen@amd.com>
Signed-off-by: Brian Xu <brian.xu@amd.com>
Tested-by: Martin Tuma <tumic@gpxsee.org>
Link: https://lore.kernel.org/r/1674145926-29449-3-git-send-email-lizhi.hou@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

show more ...

dmaengine: xilinx: xdma: Add xilinx xdma driver

Add driver to enable PCIe board which uses XDMA (the DMA/Bridge Subsystem
for PCI Express). For example, Xilinx Alveo PCIe devices.
https://www.xi

dmaengine: xilinx: xdma: Add xilinx xdma driver

Add driver to enable PCIe board which uses XDMA (the DMA/Bridge Subsystem
for PCI Express). For example, Xilinx Alveo PCIe devices.
https://www.xilinx.com/products/boards-and-kits/alveo.html

The XDMA engine support up to 4 Host to Card (H2C) and 4 Card to Host (C2H)
channels. Memory transfers are specified on a per-channel basis in
descriptor linked lists, which the DMA fetches from host memory and
processes. Events such as descriptor completion and errors are signaled
using interrupts. The hardware detail is provided by
https://docs.xilinx.com/r/en-US/pg195-pcie-dma/Introduction

This driver implements dmaengine APIs.
- probe the available DMA channels
- use dma_slave_map for channel lookup
- use virtual channel to manage dmaengine tx descriptors
- implement device_prep_slave_sg callback to handle host scatter gather
list
- implement device_config to config device address for DMA transfer

Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Sonal Santan <sonal.santan@amd.com>
Signed-off-by: Max Zhen <max.zhen@amd.com>
Signed-off-by: Brian Xu <brian.xu@amd.com>
Tested-by: Martin Tuma <tumic@gpxsee.org>
Link: https://lore.kernel.org/r/1674145926-29449-2-git-send-email-lizhi.hou@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

show more ...