Revision tags: v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20 |
|
#
dcc35457 |
| 03-Mar-2021 |
Lee Jones <lee.jones@linaro.org> |
clk: sunxi: Demote non-conformant kernel-doc headers
Headers must describe their parameters.
Fixes the following W=1 kernel build warning(s):
drivers/clk/sunxi/clk-sun9i-core.c:27: warning: Funct
clk: sunxi: Demote non-conformant kernel-doc headers
Headers must describe their parameters.
Fixes the following W=1 kernel build warning(s):
drivers/clk/sunxi/clk-sun9i-core.c:27: warning: Function parameter or member 'req' not described in 'sun9i_a80_get_pll4_factors' drivers/clk/sunxi/clk-sun9i-core.c:100: warning: Function parameter or member 'req' not described in 'sun9i_a80_get_gt_factors' drivers/clk/sunxi/clk-sun9i-core.c:155: warning: Function parameter or member 'req' not described in 'sun9i_a80_get_ahb_factors' drivers/clk/sunxi/clk-sun9i-core.c:235: warning: Function parameter or member 'req' not described in 'sun9i_a80_get_apb1_factors' drivers/clk/sunxi/clk-usb.c:22: warning: cannot understand function prototype: 'struct usb_reset_data ' drivers/clk/sunxi/clk-sun6i-ar100.c:26: warning: Function parameter or member 'req' not described in 'sun6i_get_ar100_factors'
Cc: "Emilio López" <emilio@elopez.com.ar> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Maxime Ripard <mripard@kernel.org> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Jernej Skrabec <jernej.skrabec@siol.net> Cc: Boris BREZILLON <boris.brezillon@free-electrons.com> Cc: linux-clk@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20210303142430.3168703-1-lee.jones@linaro.org
show more ...
|
Revision tags: v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4, v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7, v5.2.6, v5.2.5, v5.2.4, v5.2.3, v5.2.2, v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8, v5.1.7, v5.1.6 |
|
#
c942fddf |
| 27-May-2019 |
Thomas Gleixner <tglx@linutronix.de> |
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157
Based on 3 normalized pattern(s):
this program is free software you can redistribute it and or modify it under the terms of th
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157
Based on 3 normalized pattern(s):
this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details
this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details
this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [graeme] [gregory] [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema] [hk] [hemahk]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 1105 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v5.1.5, v5.1.4, v5.1.3, v5.1.2, v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11, v5.0.10, v5.0.9, v5.0.8, v5.0.7, v5.0.6, v5.0.5, v5.0.4, v5.0.3, v4.19.29, v5.0.2, v4.19.28, v5.0.1, v4.19.27, v5.0, v4.19.26, v4.19.25, v4.19.24, v4.19.23, v4.19.22, v4.19.21, v4.19.20, v4.19.19, v4.19.18, v4.19.17, v4.19.16, v4.19.15, v4.19.14, v4.19.13, v4.19.12, v4.19.11, v4.19.10, v4.19.9, v4.19.8, v4.19.7, v4.19.6, v4.19.5, v4.19.4, v4.18.20, v4.19.3, v4.18.19, v4.19.2, v4.18.18, v4.18.17, v4.19.1, v4.19, v4.18.16, v4.18.15, v4.18.14, v4.18.13, v4.18.12, v4.18.11, v4.18.10, v4.18.9, v4.18.7, v4.18.6 |
|
#
e665f029 |
| 28-Aug-2018 |
Rob Herring <robh@kernel.org> |
clk: Convert to using %pOFn instead of device_node.name
In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier.
Cc: Eugeniy P
clk: Convert to using %pOFn instead of device_node.name
In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier.
Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: linux-clk@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-omap@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
show more ...
|
Revision tags: v4.18.5, v4.17.18, v4.18.4, v4.18.3, v4.17.17, v4.18.2, v4.17.16, v4.17.15, v4.18.1, v4.18, v4.17.14, v4.17.13, v4.17.12, v4.17.11, v4.17.10, v4.17.9, v4.17.8, v4.17.7, v4.17.6, v4.17.5, v4.17.4, v4.17.3, v4.17.2, v4.17.1, v4.17, v4.16, v4.15 |
|
#
9919d44f |
| 02-Jan-2018 |
Stephen Boyd <sboyd@codeaurora.org> |
clk: sunxi: Use CLK_IS_CRITICAL flag for critical clks
We'd like to privatize __clk_get(), but the sunxi clk driver is calling this function to keep a reference held on the clk and call clk_prepare_
clk: sunxi: Use CLK_IS_CRITICAL flag for critical clks
We'd like to privatize __clk_get(), but the sunxi clk driver is calling this function to keep a reference held on the clk and call clk_prepare_enable() on it. We support this design in the clk core now with the CLK_IS_CRITICAL flag, so let's just use that instead.
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
show more ...
|
Revision tags: v4.13.16, v4.14, v4.13.5, v4.13, v4.12, v4.10.17, v4.10.16, v4.10.15, v4.10.14, v4.10.13, v4.10.12, v4.10.11, v4.10.10, v4.10.9, v4.10.8, v4.10.7, v4.10.6, v4.10.5, v4.10.4, v4.10.3, v4.10.2, v4.10.1, v4.10, v4.9, openbmc-4.4-20161121-1, v4.4.33, v4.4.32, v4.4.31, v4.4.30, v4.4.29, v4.4.28, v4.4.27, v4.7.10, openbmc-4.4-20161021-1, v4.7.9, v4.4.26, v4.7.8, v4.4.25, v4.4.24, v4.7.7, v4.8, v4.4.23, v4.7.6, v4.7.5, v4.4.22, v4.4.21, v4.7.4, v4.7.3, v4.4.20, v4.7.2, v4.4.19, openbmc-4.4-20160819-1, v4.7.1, v4.4.18, v4.4.17, openbmc-4.4-20160804-1, v4.4.16, v4.7, openbmc-4.4-20160722-1, openbmc-20160722-1, openbmc-20160713-1, v4.4.15, v4.6.4, v4.6.3, v4.4.14, v4.6.2, v4.4.13, openbmc-20160606-1, v4.6.1, v4.4.12, openbmc-20160521-1, v4.4.11, openbmc-20160518-1, v4.6, v4.4.10, openbmc-20160511-1, openbmc-20160505-1, v4.4.9, v4.4.8, v4.4.7, openbmc-20160329-2, openbmc-20160329-1, openbmc-20160321-1, v4.4.6, v4.5, v4.4.5, v4.4.4, v4.4.3, openbmc-20160222-1, v4.4.2, openbmc-20160212-1, openbmc-20160210-1 |
|
#
b0b6413f |
| 02-Feb-2016 |
Maxime Ripard <maxime.ripard@free-electrons.com> |
clk: sunxi: Remove clk_register_clkdev calls
Now that our protection code doesn't use the global name lookup anymore, we can remove the clkdev registrations.
Signed-off-by: Maxime Ripard <maxime.ri
clk: sunxi: Remove clk_register_clkdev calls
Now that our protection code doesn't use the global name lookup anymore, we can remove the clkdev registrations.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
show more ...
|
Revision tags: openbmc-20160202-2, openbmc-20160202-1, v4.4.1, openbmc-20160127-1 |
|
#
cfa63688 |
| 25-Jan-2016 |
Chen-Yu Tsai <wens@csie.org> |
clk: sunxi: factors: Consolidate get_factors parameters into a struct
The .get_factors callback of factors_clk has 6 parameters. To extend factors_clk in any way that requires adding parameters to .
clk: sunxi: factors: Consolidate get_factors parameters into a struct
The .get_factors callback of factors_clk has 6 parameters. To extend factors_clk in any way that requires adding parameters to .get_factors would make that list even longer, not to mention changing all the function declarations.
Do this once now and consolidate all the parameters into a struct. Also drop the space before function pointer arguments, since checkpatch complains.
Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
show more ...
|
#
b3e919e0 |
| 25-Jan-2016 |
Chen-Yu Tsai <wens@csie.org> |
clk: sunxi: factors: Make struct clk_factors_config table const
struct clk_factors_config contains shifts/widths for the factors of the factors clk. This is used to read out the factors from the reg
clk: sunxi: factors: Make struct clk_factors_config table const
struct clk_factors_config contains shifts/widths for the factors of the factors clk. This is used to read out the factors from the register value. In no case is it written to, so make it const.
Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
show more ...
|
Revision tags: openbmc-20160120-1, v4.4, openbmc-20151217-1, openbmc-20151210-1, openbmc-20151202-1, openbmc-20151123-1, openbmc-20151118-1, openbmc-20151104-1, v4.3, openbmc-20151102-1, openbmc-20151028-1, v4.3-rc1, v4.2, v4.2-rc8, v4.2-rc7, v4.2-rc6, v4.2-rc5, v4.2-rc4, v4.2-rc3, v4.2-rc2, v4.2-rc1, v4.1 |
|
#
9dfefe8c |
| 19-Jun-2015 |
Stephen Boyd <sboyd@codeaurora.org> |
clk: sunxi: Include clk.h and remove unused clkdev.h includes
This clock provider uses the consumer API, so include clk.h explicitly. Also remove clkdev.h in files that aren't using it and include s
clk: sunxi: Include clk.h and remove unused clkdev.h includes
This clock provider uses the consumer API, so include clk.h explicitly. Also remove clkdev.h in files that aren't using it and include slab.h when clkdev.h was being used to implicitly include it.
Cc: Chen-Yu Tsai <wens@csie.org> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
show more ...
|
Revision tags: v4.1-rc8, v4.1-rc7, v4.1-rc6, v4.1-rc5, v4.1-rc4, v4.1-rc3, v4.1-rc2 |
|
#
5ac382c3 |
| 02-May-2015 |
Maxime Ripard <maxime.ripard@free-electrons.com> |
clk: sunxi: Fix of_io_request_and_map error check
of_io_request_and map returns an error pointer, but the current code assumes that on error the returned pointer will be NULL.
Obviously, that makes
clk: sunxi: Fix of_io_request_and_map error check
of_io_request_and map returns an error pointer, but the current code assumes that on error the returned pointer will be NULL.
Obviously, that makes the check completely useless. Change the test to actually check for the proper error code.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Mike Turquette <mturquette@linaro.org> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: linux-clk@vger.kernel.org
show more ...
|
Revision tags: v4.1-rc1, v4.0, v4.0-rc7, v4.0-rc6, v4.0-rc5, v4.0-rc4, v4.0-rc3, v4.0-rc2, v4.0-rc1, v3.19, v3.19-rc7, v3.19-rc6 |
|
#
6424e0ae |
| 24-Jan-2015 |
Hans de Goede <hdegoede@redhat.com> |
clk: sunxi: rewrite sun9i_a80_get_pll4_factors()
The old implementation of sun9i_a80_get_pll4_factors() has several issues, it checks against 256 / 512 in various places where it should use 255 / 51
clk: sunxi: rewrite sun9i_a80_get_pll4_factors()
The old implementation of sun9i_a80_get_pll4_factors() has several issues, it checks against 256 / 512 in various places where it should use 255 / 511, it does the wrong thing for low frequencies which are an even multiple of 6 MHz, e.g. if you ask it for 72 MHz it will result in 144 Mhz, and it does not take into account that n must be at least 12. Moreover it is quite hard to read / follow it.
This commit rewrites it to be correct in all cases, and makes it much easier to follow the code / to read.
Cc: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
show more ...
|
Revision tags: v3.19-rc5, v3.19-rc4, v3.19-rc3, v3.19-rc2, v3.19-rc1, v3.18, v3.18-rc7 |
|
#
66e79cf1 |
| 27-Nov-2014 |
Chen-Yu Tsai <wens@csie.org> |
clk: sunxi: Fix factor clocks usage for sun9i core clocks
The sunxi factor clocks usage was changed in
clk: sunxi: Give sunxi_factors_register a registers parameter
However the sun9i core cloc
clk: sunxi: Fix factor clocks usage for sun9i core clocks
The sunxi factor clocks usage was changed in
clk: sunxi: Give sunxi_factors_register a registers parameter
However the sun9i core clocks were not fixed up in that patch, resulting in breakage. This patch fixes that.
Signed-off-by: Chen-Yu Tsai <wens@csie.org> Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
show more ...
|
Revision tags: v3.18-rc6, v3.18-rc5, v3.18-rc4, v3.18-rc3, v3.18-rc2 |
|
#
3b2bd70f |
| 20-Oct-2014 |
Chen-Yu Tsai <wens@csie.org> |
clk: sunxi: Add support for A80 basic bus clocks
The A80 SoC has 12 PLL clocks, 3 AHB clocks, 2 APB clocks, and a new "GT" bus, which I assume is some kind of data bus connecting the processor cores
clk: sunxi: Add support for A80 basic bus clocks
The A80 SoC has 12 PLL clocks, 3 AHB clocks, 2 APB clocks, and a new "GT" bus, which I assume is some kind of data bus connecting the processor cores, memory and various busses. Also there is a bus clock for a ARM CCI400 module.
As far as I can tell, the GT bus and CCI400 bus clock must be protected.
This patch adds driver support for peripheral related PLLs and bus clocks on the A80. The GT and CCI400 clocks are added as well as these 2 along with the PLLs they are clocked from must not be disabled.
Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
show more ...
|
Revision tags: v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4, v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7, v5.2.6, v5.2.5, v5.2.4, v5.2.3, v5.2.2, v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8, v5.1.7, v5.1.6 |
|
#
c942fddf |
| 27-May-2019 |
Thomas Gleixner <tglx@linutronix.de> |
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157 Based on 3 normalized pattern(s): this program is free software you can redistribute it and or modify it u
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157 Based on 3 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [graeme] [gregory] [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema] [hk] [hemahk]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1105 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v5.1.5, v5.1.4, v5.1.3, v5.1.2, v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11, v5.0.10, v5.0.9, v5.0.8, v5.0.7, v5.0.6, v5.0.5, v5.0.4, v5.0.3, v4.19.29, v5.0.2, v4.19.28, v5.0.1, v4.19.27, v5.0, v4.19.26, v4.19.25, v4.19.24, v4.19.23, v4.19.22, v4.19.21, v4.19.20, v4.19.19, v4.19.18, v4.19.17, v4.19.16, v4.19.15, v4.19.14, v4.19.13, v4.19.12, v4.19.11, v4.19.10, v4.19.9, v4.19.8, v4.19.7, v4.19.6, v4.19.5, v4.19.4, v4.18.20, v4.19.3, v4.18.19, v4.19.2, v4.18.18, v4.18.17, v4.19.1, v4.19, v4.18.16, v4.18.15, v4.18.14, v4.18.13, v4.18.12, v4.18.11, v4.18.10, v4.18.9, v4.18.7, v4.18.6 |
|
#
e665f029 |
| 28-Aug-2018 |
Rob Herring <robh@kernel.org> |
clk: Convert to using %pOFn instead of device_node.name In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier.
clk: Convert to using %pOFn instead of device_node.name In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: linux-clk@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-omap@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
show more ...
|
Revision tags: v4.18.5, v4.17.18, v4.18.4, v4.18.3, v4.17.17, v4.18.2, v4.17.16, v4.17.15, v4.18.1, v4.18, v4.17.14, v4.17.13, v4.17.12, v4.17.11, v4.17.10, v4.17.9, v4.17.8, v4.17.7, v4.17.6, v4.17.5, v4.17.4, v4.17.3, v4.17.2, v4.17.1, v4.17, v4.16, v4.15 |
|
#
9919d44f |
| 02-Jan-2018 |
Stephen Boyd <sboyd@codeaurora.org> |
clk: sunxi: Use CLK_IS_CRITICAL flag for critical clks We'd like to privatize __clk_get(), but the sunxi clk driver is calling this function to keep a reference held on the clk and c
clk: sunxi: Use CLK_IS_CRITICAL flag for critical clks We'd like to privatize __clk_get(), but the sunxi clk driver is calling this function to keep a reference held on the clk and call clk_prepare_enable() on it. We support this design in the clk core now with the CLK_IS_CRITICAL flag, so let's just use that instead. Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
show more ...
|
Revision tags: v4.13.16, v4.14, v4.13.5, v4.13, v4.12, v4.10.17, v4.10.16, v4.10.15, v4.10.14, v4.10.13, v4.10.12, v4.10.11, v4.10.10, v4.10.9, v4.10.8, v4.10.7, v4.10.6, v4.10.5, v4.10.4, v4.10.3, v4.10.2, v4.10.1, v4.10, v4.9, openbmc-4.4-20161121-1, v4.4.33, v4.4.32, v4.4.31, v4.4.30, v4.4.29, v4.4.28, v4.4.27, v4.7.10, openbmc-4.4-20161021-1, v4.7.9, v4.4.26, v4.7.8, v4.4.25, v4.4.24, v4.7.7, v4.8, v4.4.23, v4.7.6, v4.7.5, v4.4.22, v4.4.21, v4.7.4, v4.7.3, v4.4.20, v4.7.2, v4.4.19, openbmc-4.4-20160819-1, v4.7.1, v4.4.18, v4.4.17, openbmc-4.4-20160804-1, v4.4.16, v4.7, openbmc-4.4-20160722-1, openbmc-20160722-1, openbmc-20160713-1, v4.4.15, v4.6.4, v4.6.3, v4.4.14, v4.6.2, v4.4.13, openbmc-20160606-1, v4.6.1, v4.4.12, openbmc-20160521-1, v4.4.11, openbmc-20160518-1, v4.6, v4.4.10, openbmc-20160511-1, openbmc-20160505-1, v4.4.9, v4.4.8, v4.4.7, openbmc-20160329-2, openbmc-20160329-1, openbmc-20160321-1, v4.4.6, v4.5, v4.4.5, v4.4.4, v4.4.3, openbmc-20160222-1, v4.4.2, openbmc-20160212-1, openbmc-20160210-1 |
|
#
b0b6413f |
| 02-Feb-2016 |
Maxime Ripard <maxime.ripard@free-electrons.com> |
clk: sunxi: Remove clk_register_clkdev calls Now that our protection code doesn't use the global name lookup anymore, we can remove the clkdev registrations. Signed-off-by: Maxi
clk: sunxi: Remove clk_register_clkdev calls Now that our protection code doesn't use the global name lookup anymore, we can remove the clkdev registrations. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
show more ...
|
Revision tags: openbmc-20160202-2, openbmc-20160202-1, v4.4.1, openbmc-20160127-1 |
|
#
cfa63688 |
| 25-Jan-2016 |
Chen-Yu Tsai <wens@csie.org> |
clk: sunxi: factors: Consolidate get_factors parameters into a struct The .get_factors callback of factors_clk has 6 parameters. To extend factors_clk in any way that requires adding par
clk: sunxi: factors: Consolidate get_factors parameters into a struct The .get_factors callback of factors_clk has 6 parameters. To extend factors_clk in any way that requires adding parameters to .get_factors would make that list even longer, not to mention changing all the function declarations. Do this once now and consolidate all the parameters into a struct. Also drop the space before function pointer arguments, since checkpatch complains. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
show more ...
|
#
b3e919e0 |
| 25-Jan-2016 |
Chen-Yu Tsai <wens@csie.org> |
clk: sunxi: factors: Make struct clk_factors_config table const struct clk_factors_config contains shifts/widths for the factors of the factors clk. This is used to read out the factors
clk: sunxi: factors: Make struct clk_factors_config table const struct clk_factors_config contains shifts/widths for the factors of the factors clk. This is used to read out the factors from the register value. In no case is it written to, so make it const. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
show more ...
|
Revision tags: openbmc-20160120-1, v4.4, openbmc-20151217-1, openbmc-20151210-1, openbmc-20151202-1, openbmc-20151123-1, openbmc-20151118-1, openbmc-20151104-1, v4.3, openbmc-20151102-1, openbmc-20151028-1, v4.3-rc1, v4.2, v4.2-rc8, v4.2-rc7, v4.2-rc6, v4.2-rc5, v4.2-rc4, v4.2-rc3, v4.2-rc2, v4.2-rc1, v4.1 |
|
#
9dfefe8c |
| 19-Jun-2015 |
Stephen Boyd <sboyd@codeaurora.org> |
clk: sunxi: Include clk.h and remove unused clkdev.h includes This clock provider uses the consumer API, so include clk.h explicitly. Also remove clkdev.h in files that aren't using it
clk: sunxi: Include clk.h and remove unused clkdev.h includes This clock provider uses the consumer API, so include clk.h explicitly. Also remove clkdev.h in files that aren't using it and include slab.h when clkdev.h was being used to implicitly include it. Cc: Chen-Yu Tsai <wens@csie.org> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
show more ...
|
Revision tags: v4.1-rc8, v4.1-rc7, v4.1-rc6, v4.1-rc5, v4.1-rc4, v4.1-rc3, v4.1-rc2 |
|
#
5ac382c3 |
| 02-May-2015 |
Maxime Ripard <maxime.ripard@free-electrons.com> |
clk: sunxi: Fix of_io_request_and_map error check of_io_request_and map returns an error pointer, but the current code assumes that on error the returned pointer will be NULL. O
clk: sunxi: Fix of_io_request_and_map error check of_io_request_and map returns an error pointer, but the current code assumes that on error the returned pointer will be NULL. Obviously, that makes the check completely useless. Change the test to actually check for the proper error code. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Mike Turquette <mturquette@linaro.org> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: linux-clk@vger.kernel.org
show more ...
|
Revision tags: v4.1-rc1, v4.0, v4.0-rc7, v4.0-rc6, v4.0-rc5, v4.0-rc4, v4.0-rc3, v4.0-rc2, v4.0-rc1, v3.19, v3.19-rc7, v3.19-rc6 |
|
#
6424e0ae |
| 24-Jan-2015 |
Hans de Goede <hdegoede@redhat.com> |
clk: sunxi: rewrite sun9i_a80_get_pll4_factors() The old implementation of sun9i_a80_get_pll4_factors() has several issues, it checks against 256 / 512 in various places where it should
clk: sunxi: rewrite sun9i_a80_get_pll4_factors() The old implementation of sun9i_a80_get_pll4_factors() has several issues, it checks against 256 / 512 in various places where it should use 255 / 511, it does the wrong thing for low frequencies which are an even multiple of 6 MHz, e.g. if you ask it for 72 MHz it will result in 144 Mhz, and it does not take into account that n must be at least 12. Moreover it is quite hard to read / follow it. This commit rewrites it to be correct in all cases, and makes it much easier to follow the code / to read. Cc: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
show more ...
|
Revision tags: v3.19-rc5, v3.19-rc4, v3.19-rc3, v3.19-rc2, v3.19-rc1, v3.18, v3.18-rc7 |
|
#
66e79cf1 |
| 27-Nov-2014 |
Chen-Yu Tsai <wens@csie.org> |
clk: sunxi: Fix factor clocks usage for sun9i core clocks The sunxi factor clocks usage was changed in clk: sunxi: Give sunxi_factors_register a registers parameter How
clk: sunxi: Fix factor clocks usage for sun9i core clocks The sunxi factor clocks usage was changed in clk: sunxi: Give sunxi_factors_register a registers parameter However the sun9i core clocks were not fixed up in that patch, resulting in breakage. This patch fixes that. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
show more ...
|
Revision tags: v3.18-rc6, v3.18-rc5, v3.18-rc4, v3.18-rc3, v3.18-rc2 |
|
#
3b2bd70f |
| 20-Oct-2014 |
Chen-Yu Tsai <wens@csie.org> |
clk: sunxi: Add support for A80 basic bus clocks The A80 SoC has 12 PLL clocks, 3 AHB clocks, 2 APB clocks, and a new "GT" bus, which I assume is some kind of data bus connecting the
clk: sunxi: Add support for A80 basic bus clocks The A80 SoC has 12 PLL clocks, 3 AHB clocks, 2 APB clocks, and a new "GT" bus, which I assume is some kind of data bus connecting the processor cores, memory and various busses. Also there is a bus clock for a ARM CCI400 module. As far as I can tell, the GT bus and CCI400 bus clock must be protected. This patch adds driver support for peripheral related PLLs and bus clocks on the A80. The GT and CCI400 clocks are added as well as these 2 along with the PLLs they are clocked from must not be disabled. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
show more ...
|