clk: st: flexgen: Switch to determine_rate

The ST Flexgen clocks implements a mux with a set_parent hook, but
doesn't provide a determine_rate implementation.

This is a bit odd, since set_parent()

clk: st: flexgen: Switch to determine_rate

The ST Flexgen clocks implements a mux with a set_parent hook, but
doesn't provide a determine_rate implementation.

This is a bit odd, since set_parent() is there to, as its name implies,
change the parent of a clock. However, the most likely candidate to
trigger that parent change is a call to clk_set_rate(), with
determine_rate() figuring out which parent is the best suited for a
given rate.

The other trigger would be a call to clk_set_parent(), but it's far less
used, and it doesn't look like there's any obvious user for that clock.

So, the set_parent hook is effectively unused, possibly because of an
oversight. However, it could also be an explicit decision by the
original author to avoid any reparenting but through an explicit call to
clk_set_parent().

The driver does implement round_rate() though, which means that we can
change the rate of the clock, but we will never get to change the
parent.

However, It's hard to tell whether it's been done on purpose or not.

Since we'll start mandating a determine_rate() implementation, let's
convert the round_rate() implementation to a determine_rate(), which
will also make the current behavior explicit. And if it was an
oversight, the clock behaviour can be adjusted later on.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20221018-clk-range-checks-fixes-v4-62-971d5077e7d2@cerno.tech
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

show more ...

clk: st: flexgen: embed soc clock outputs within compatible data

In order to avoid relying on the old style description via the DT
clock-output-names, add compatible data describing the flexgen
outp

clk: st: flexgen: embed soc clock outputs within compatible data

In order to avoid relying on the old style description via the DT
clock-output-names, add compatible data describing the flexgen
outputs clocks for all STiH407/STiH410 and STiH418 SOCs.

In order to ease transition between the two methods, this commit
introduce the new compatible without removing the old method.
Once DTs will be fixed, the method relying on DT clock-output-names
will be removed from this driver as well as old compatibles.

Signed-off-by: Alain Volmat <avolmat@me.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Link: https://lore.kernel.org/r/20210331201632.24530-3-avolmat@me.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

show more ...

clk: clk-flexgen: fix clock-critical handling

Fixes an issue leading to having all clocks following a critical
clocks marked as well as criticals.

Fixes: fa6415affe20 ("clk: st: clk-flexgen: Detect

clk: clk-flexgen: fix clock-critical handling

Fixes an issue leading to having all clocks following a critical
clocks marked as well as criticals.

Fixes: fa6415affe20 ("clk: st: clk-flexgen: Detect critical clocks")
Signed-off-by: Alain Volmat <avolmat@me.com>
Link: https://lkml.kernel.org/r/20200322140740.3970-1-avolmat@me.com
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

show more ...

clk: st: clk-flexgen: Add of_node_put() in st_of_flexgen_setup()

In function st_of_flexgen_setup, variable pnode takes the return value
of of_get_parent, which gets a node but does not put it. If pn

clk: st: clk-flexgen: Add of_node_put() in st_of_flexgen_setup()

In function st_of_flexgen_setup, variable pnode takes the return value
of of_get_parent, which gets a node but does not put it. If pnode is not
put before the function returns, it may cause a memory leak. Hence put
pnode after its last occurrence.
Issue found with Coccinelle.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lkml.kernel.org/r/20190804163151.6511-1-nishkadg.linux@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

show more ...

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 194

Based on 1 normalized pattern(s):

license terms gnu general public license gpl version 2

extracted by the scancode license scan

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 194

Based on 1 normalized pattern(s):

license terms gnu general public license gpl version 2

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-only

has been chosen to replace the boilerplate/reference in 161 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190528170027.447718015@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

clk: st: Remove usage of CLK_IS_BASIC

This flag doesn't look to be used by any code, just set in various clk
init structures and then never tested again. Remove it from these
drivers as it doesn't p

clk: st: Remove usage of CLK_IS_BASIC

This flag doesn't look to be used by any code, just set in various clk
init structures and then never tested again. Remove it from these
drivers as it doesn't provide any benefit.

Signed-off-by: Stephen Boyd <sboyd@kernel.org>

show more ...

clk: st: clk-flexgen: Unmap region obtained by of_iomap

Free memory mapping, if probe is not successful.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@c

clk: st: clk-flexgen: Unmap region obtained by of_iomap

Free memory mapping, if probe is not successful.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

show more ...

drivers: clk: st: Handle clk synchronous mode for video clocks

This patch configures the semi-synchronous mode of the video clocks
of clkgenD2.

Signed-off-by: Olivier Bideau <olivier.bideau@st.com>

drivers: clk: st: Handle clk synchronous mode for video clocks

This patch configures the semi-synchronous mode of the video clocks
of clkgenD2.

Signed-off-by: Olivier Bideau <olivier.bideau@st.com>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Acked-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

show more ...

drivers: clk: st: Add clock propagation for audio clocks

This patch allows fine tuning of the quads FS for audio clocks
accuracy.

Signed-off-by: Olivier Bideau <olivier.bideau@st.com>
Signed-off-by

drivers: clk: st: Add clock propagation for audio clocks

This patch allows fine tuning of the quads FS for audio clocks
accuracy.

Signed-off-by: Olivier Bideau <olivier.bideau@st.com>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Acked-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

show more ...

clk: st: clk-flexgen: Detect critical clocks

Utilise the new Critical Clock infrastructure to mark clocks which
much not be disabled as CRITICAL.

While we're at it, reduce the coverage of the flex_

clk: st: clk-flexgen: Detect critical clocks

Utilise the new Critical Clock infrastructure to mark clocks which
much not be disabled as CRITICAL.

While we're at it, reduce the coverage of the flex_flags variable,
since it's only really used in a single for() loop.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

show more ...

clk: st: Remove impossible check for of_clk_get_parent_count() < 0

The checks for < 0 are impossible now that
of_clk_get_parent_count() returns an unsigned int. Simplify the
code and update the type

clk: st: Remove impossible check for of_clk_get_parent_count() < 0

The checks for < 0 are impossible now that
of_clk_get_parent_count() returns an unsigned int. Simplify the
code and update the types.

Cc: Gabriel Fernandez <gabriel.fernandez@st.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

show more ...

clk: st: fix handling result of of_property_count_strings

The function can return negative value.

The problem has been detected using proposed semantic patch
scripts/coccinelle/tests/assign_signed_

clk: st: fix handling result of of_property_count_strings

The function can return negative value.

The problem has been detected using proposed semantic patch
scripts/coccinelle/tests/assign_signed_to_unsigned.cocci [1].

[1]: http://permalink.gmane.org/gmane.linux.kernel/2046107

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

show more ...

clk: Convert __clk_get_name(hw->clk) to clk_hw_get_name(hw)

Use the provider based method to get a clock's name so that we
can get rid of the clk member in struct clk_hw one day. Mostly
converted wi

clk: Convert __clk_get_name(hw->clk) to clk_hw_get_name(hw)

Use the provider based method to get a clock's name so that we
can get rid of the clk member in struct clk_hw one day. Mostly
converted with the following coccinelle script.

@@
struct clk_hw *E;
@@

-__clk_get_name(E->clk)
+clk_hw_get_name(E)

Acked-by: Heiko Stuebner <heiko@sntech.de>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Cc: Peter De Schrijver <pdeschrijver@nvidia.com>
Cc: Prashant Gaikwad <pgaikwad@nvidia.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Tero Kristo <t-kristo@ti.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Andrew Bresticker <abrestic@chromium.org>
Cc: Ezequiel Garcia <ezequiel.garcia@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Kevin Cernekee <cernekee@chromium.org>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-rockchip@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: linux-tegra@vger.kernel.org
Cc: linux-omap@vger.kernel.org
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

show more ...

clk: Convert __clk_get_flags() to clk_hw_get_flags()

Mostly converted with the following snippet:

@@
struct clk_hw *E;
@@

-__clk_get_flags(E->clk)
+clk_hw_get_flags(E)

Acked-by: Tero Kristo <t-kr

clk: Convert __clk_get_flags() to clk_hw_get_flags()

Mostly converted with the following snippet:

@@
struct clk_hw *E;
@@

-__clk_get_flags(E->clk)
+clk_hw_get_flags(E)

Acked-by: Tero Kristo <t-kristo@ti.com>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Coquelin <mcoquelin.stm32@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

show more ...

clk: st: make use of of_clk_parent_fill helper function

Use of_clk_parent_fill to fill in the parent clock names' array.

Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Tested-by Gabrie

clk: st: make use of of_clk_parent_fill helper function

Use of_clk_parent_fill to fill in the parent clock names' array.

Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Tested-by Gabriel Fernandez <gabriel.fernandez@st.com>
Cc: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

show more ...

clk: st: Include clk.h

This clock provider uses the consumer API, so include clk.h
explicitly.

Cc: Gabriel Fernandez <gabriel.fernandez@st.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

drivers: clk: st: Add CLK_GET_RATE_NOCACHE flag to clocks

Add the CLK_GET_RATE_NOCACHE flag to all the clocks with recalc ops,
so that they reflect Hw rate after CPS wake-up when a clk_get_rate()
is

drivers: clk: st: Add CLK_GET_RATE_NOCACHE flag to clocks

Add the CLK_GET_RATE_NOCACHE flag to all the clocks with recalc ops,
so that they reflect Hw rate after CPS wake-up when a clk_get_rate()
is called

Signed-off-by: Pankaj Dev <pankaj.dev@st.com>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

show more ...

drivers: clk: st: Fix flexgen lock init

While proving lock, the following warning happens
and it is fixed after initializing lock in the setup
function

INFO: trying to register non-static key.
the

drivers: clk: st: Fix flexgen lock init

While proving lock, the following warning happens
and it is fixed after initializing lock in the setup
function

INFO: trying to register non-static key.
the code is fine but needs lockdep annotation.
turning off the locking correctness validator.
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.10.27-02861-g39df285-dirty #33
[<c00154ac>] (unwind_backtrace+0x0/0xf4) from [<c0011b50>] (show_stack+0x10/0x14)
[<c0011b50>] (show_stack+0x10/0x14) from [<c00689ac>] (__lock_acquire+0x900/0xb14)
[<c00689ac>] (__lock_acquire+0x900/0xb14) from [<c0069394>] (lock_acquire+0x68/0x7c)
[<c0069394>] (lock_acquire+0x68/0x7c) from [<c04958f8>] (_raw_spin_lock_irqsave+0x48/0x5c)
[<c04958f8>] (_raw_spin_lock_irqsave+0x48/0x5c) from [<c0381e6c>] (clk_gate_endisable+0x28/0x88)
[<c0381e6c>] (clk_gate_endisable+0x28/0x88) from [<c0381ee0>] (clk_gate_enable+0xc/0x14)
[<c0381ee0>] (clk_gate_enable+0xc/0x14) from [<c0386c68>] (flexgen_enable+0x28/0x40)
[<c0386c68>] (flexgen_enable+0x28/0x40) from [<c037f260>] (__clk_enable+0x5c/0x9c)
[<c037f260>] (__clk_enable+0x5c/0x9c) from [<c037f558>] (clk_enable+0x18/0x2c)
[<c037f558>] (clk_enable+0x18/0x2c) from [<c064a1dc>] (st_lpc_of_register+0xc0/0x248)
[<c064a1dc>] (st_lpc_of_register+0xc0/0x248) from [<c0649e44>] (clocksource_of_init+0x34/0x58)
[<c0649e44>] (clocksource_of_init+0x34/0x58) from [<c0637ddc>] (sti_timer_init+0x10/0x18)
[<c0637ddc>] (sti_timer_init+0x10/0x18) from [<c06343f8>] (time_init+0x20/0x30)
[<c06343f8>] (time_init+0x20/0x30) from [<c0632984>] (start_kernel+0x20c/0x2e8)
[<c0632984>] (start_kernel+0x20c/0x2e8) from [<40008074>] (0x40008074)

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
Fixes: b116517055b7 ("clk: st: STiH407: Support for Flexgen Clocks")
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

show more ...

clk: st: Use of_clk_get_parent_count() instead of open coding

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

clk: st: Silence sparse warnings

drivers/clk/st/clkgen-mux.c:134:4: warning: symbol 'clkgena_divmux_get_parent' was not declared. Should it be static?
drivers/clk/st/clkgen-mux.c:171:15: warning: sy

clk: st: Silence sparse warnings

drivers/clk/st/clkgen-mux.c:134:4: warning: symbol 'clkgena_divmux_get_parent' was not declared. Should it be static?
drivers/clk/st/clkgen-mux.c:171:15: warning: symbol 'clkgena_divmux_recalc_rate' was not declared. Should it be static?
drivers/clk/st/clkgen-mux.c:218:12: warning: symbol 'clk_register_genamux' was not declared. Should it be static?
drivers/clk/st/clkgen-mux.c:388:13: warning: symbol 'st_of_clkgena_divmux_setup' was not declared. Should it be static?
drivers/clk/st/clkgen-mux.c:488:13: warning: symbol 'st_of_clkgena_prediv_setup' was not declared. Should it be static?
drivers/clk/st/clkgen-mux.c:625:13: warning: symbol 'st_of_clkgen_mux_setup' was not declared. Should it be static?
drivers/clk/st/clkgen-mux.c:702:13: warning: symbol 'st_of_clkgen_vcc_setup' was not declared. Should it be static?
drivers/clk/st/clkgen-pll.c:273:15: warning: symbol 'recalc_stm_pll800c65' was not declared. Should it be static?
drivers/clk/st/clkgen-pll.c:300:15: warning: symbol 'recalc_stm_pll1600c65' was not declared. Should it be static?
drivers/clk/st/clkgen-pll.c:324:15: warning: symbol 'recalc_stm_pll3200c32' was not declared. Should it be static?
drivers/clk/st/clkgen-pll.c:346:15: warning: symbol 'recalc_stm_pll1200c32' was not declared. Should it be static?
drivers/clk/st/clkgen-pll.c:565:19: warning: incorrect type in assignment (different address spaces)
drivers/clk/st/clkgen-pll.c:565:19: expected void [noderef] <asn:2>*reg
drivers/clk/st/clkgen-pll.c:565:19: got void *
drivers/clk/st/clkgen-pll.c:576:18: warning: incorrect type in assignment (different address spaces)
drivers/clk/st/clkgen-pll.c:576:18: expected void [noderef] <asn:2>*reg
drivers/clk/st/clkgen-pll.c:576:18: got void *
drivers/clk/st/clkgen-pll.c:693:53: warning: incorrect type in argument 2 (different address spaces)
drivers/clk/st/clkgen-pll.c:693:53: expected void *[noderef] <asn:2>reg
drivers/clk/st/clkgen-pll.c:693:53: got void [noderef] <asn:2>*[assigned] pll_base
drivers/clk/st/clkgen-fsyn.c:495:5: warning: symbol 'clk_fs660c32_vco_get_rate' was not declared. Should it be static?
drivers/clk/st/clkgen-fsyn.c:522:5: warning: symbol 'clk_fs660c32_vco_get_params' was not declared. Should it be static?
drivers/clk/st/clk-flexgen.c:119:15: warning: symbol 'flexgen_recalc_rate' was not declared. Should it be static?
drivers/clk/st/clk-flexgen.c:177:12: warning: symbol 'clk_register_flexgen' was not declared. Should it be static?
drivers/clk/st/clk-flexgen.c:263:13: warning: symbol 'st_of_flexgen_setup' was not declared. Should it be static?

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

show more ...

clk: Replace explicit clk assignment with __clk_hw_set_clk

The change in the clk API to return a per-user clock instance, moved
the clock state to struct clk_core so now the struct clk_hw .core fiel

clk: Replace explicit clk assignment with __clk_hw_set_clk

The change in the clk API to return a per-user clock instance, moved
the clock state to struct clk_core so now the struct clk_hw .core field
is used instead of .clk for most operations.

So for hardware clocks that needs to share the same clock state, both
the .core and .clk pointers have to be assigned but currently only the
.clk is set. This leads to NULL pointer dereference when the operations
try to access the hw clock .core. For example, the composite clock rate
and mux components didn't have a .core set which leads to this error:

Unable to handle kernel NULL pointer dereference at virtual address 00000034
pgd = c0004000
[00000034] *pgd=00000000
Internal error: Oops: 5 [#1] PREEMPT SMP ARM
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.19.0-next-20150211-00002-g1fb7f0e1150d #423
Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
task: ee480000 ti: ee488000 task.ti: ee488000
PC is at clk_mux_determine_rate_flags+0x14/0x19c
LR is at __clk_mux_determine_rate+0x24/0x2c
pc : [<c03a355c>] lr : [<c03a3734>] psr: a0000113
sp : ee489ce8 ip : ee489d84 fp : ee489d84
r10: 0000005c r9 : 00000001 r8 : 016e3600
r7 : 00000000 r6 : 00000000 r5 : ee442200 r4 : ee440c98
r3 : ffffffff r2 : 00000000 r1 : 016e3600 r0 : ee440c98
Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel
Control: 10c5387d Table: 4000406a DAC: 00000015
Process swapper/0 (pid: 1, stack limit = 0xee488210)
Stack: (0xee489ce8 to 0xee48a000)
9ce0: 00000000 ffffffff 60000113 ee440c98 ee442200 00000000
9d00: 016e3600 ffffffff 00000001 0000005c ee489d84 c03a3734 ee489d80 ee489d84
9d20: 00000000 c048b130 00000400 c03a5798 ee489d80 ee489d84 c0607f60 ffffffea
9d40: 00000001 00000001 ee489d5c c003f844 c06e3340 ee402680 ee440d0c ed935000
9d60: 016e3600 00000003 00000001 0000005c eded3700 c03a11a0 ee489d80 ee489d84
9d80: 016e3600 ee402680 c05b413a eddc9900 016e3600 c03a1228 00000000 ffffffff
9da0: ffffffff eddc9900 016e3600 c03a1c1c ffffffff 016e3600 ed8c6710 c03d6ce4
9dc0: eded3400 00000000 00000000 c03c797c 00000001 0000005c eded3700 eded3700
9de0: 000005e0 00000001 0000005c c03db8ac c06e7e54 c03c8f08 00000000 c06e7e64
9e00: c06b6e74 c06e7f64 000005e0 c06e7df8 c06e5100 00000000 c06e7e6c c06e7f54
9e20: 00000000 00000000 eebd9550 00000000 c06e7da0 c06e7e54 ee7b5010 c06e7da0
9e40: eddc9690 c06e7db4 c06b6e74 00000097 00000000 c03d4398 00000000 ee7b5010
9e60: eebd9550 c06e7da0 00000000 c03db824 ee7b5010 fffffffe c06e7db4 c0299c7c
9e80: ee7b5010 c072a05c 00000000 c0298858 ee7b5010 c06e7db4 ee7b5044 00000000
9ea0: eddc9580 c0298a04 c06e7db4 00000000 c0298978 c02971d4 ee405c78 ee732b40
9ec0: c06e7db4 eded3800 c06d6738 c0298044 c0608300 c06e7db4 00000000 c06e7db4
9ee0: 00000000 c06beb58 c06beb58 c0299024 00000000 c068dd00 00000000 c0008944
9f00: 00000038 c049013c ee462200 c0711920 ee480000 60000113 c06c2cb0 00000000
9f20: 00000000 c06c2cb0 60000113 00000000 ef7fcafc 00000000 c0640194 c00389ec
9f40: c05ec3a8 c063f824 00000006 00000006 c06c2c50 c0696444 00000006 c0696424
9f60: c06ee1c0 c066b588 c06b6e74 00000097 00000000 c066bd44 00000006 00000006
9f80: c066b588 c003d684 00000000 c0481938 00000000 00000000 00000000 00000000
9fa0: 00000000 c0481940 00000000 c000e680 00000000 00000000 00000000 00000000
9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
[<c03a355c>] (clk_mux_determine_rate_flags) from [<c03a3734>] (__clk_mux_determine_rate+0x24/0x2c)
[<c03a3734>] (__clk_mux_determine_rate) from [<c03a5798>] (clk_composite_determine_rate+0xbc/0x238)
[<c03a5798>] (clk_composite_determine_rate) from [<c03a11a0>] (clk_core_round_rate_nolock+0x5c/0x9c)
[<c03a11a0>] (clk_core_round_rate_nolock) from [<c03a1228>] (__clk_round_rate+0x38/0x40)
[<c03a1228>] (__clk_round_rate) from [<c03a1c1c>] (clk_round_rate+0x20/0x38)
[<c03a1c1c>] (clk_round_rate) from [<c03d6ce4>] (max98090_dai_set_sysclk+0x34/0x118)
[<c03d6ce4>] (max98090_dai_set_sysclk) from [<c03c797c>] (snd_soc_dai_set_sysclk+0x38/0x80)
[<c03c797c>] (snd_soc_dai_set_sysclk) from [<c03db8ac>] (snow_late_probe+0x24/0x48)
[<c03db8ac>] (snow_late_probe) from [<c03c8f08>] (snd_soc_register_card+0xf04/0x1070)
[<c03c8f08>] (snd_soc_register_card) from [<c03d4398>] (devm_snd_soc_register_card+0x30/0x64)
[<c03d4398>] (devm_snd_soc_register_card) from [<c03db824>] (snow_probe+0x68/0xcc)
[<c03db824>] (snow_probe) from [<c0299c7c>] (platform_drv_probe+0x48/0x98)
[<c0299c7c>] (platform_drv_probe) from [<c0298858>] (driver_probe_device+0x114/0x234)
[<c0298858>] (driver_probe_device) from [<c0298a04>] (__driver_attach+0x8c/0x90)
[<c0298a04>] (__driver_attach) from [<c02971d4>] (bus_for_each_dev+0x54/0x88)
[<c02971d4>] (bus_for_each_dev) from [<c0298044>] (bus_add_driver+0xd8/0x1cc)
[<c0298044>] (bus_add_driver) from [<c0299024>] (driver_register+0x78/0xf4)
[<c0299024>] (driver_register) from [<c0008944>] (do_one_initcall+0x80/0x1d0)
[<c0008944>] (do_one_initcall) from [<c066bd44>] (kernel_init_freeable+0x10c/0x1d8)
[<c066bd44>] (kernel_init_freeable) from [<c0481940>] (kernel_init+0x8/0xe4)
[<c0481940>] (kernel_init) from [<c000e680>] (ret_from_fork+0x14/0x34)
Code: e24dd00c e5907000 e1a08001 e88d000c (e5970034)

The changes were made using the following cocinelle semantic patch:

@i@
@@

@depends on i@
identifier dst;
@@

- dst->clk = hw->clk;
+ __clk_hw_set_clk(dst, hw);

@depends on i@
identifier dst;
@@

- dst->hw.clk = hw->clk;
+ __clk_hw_set_clk(&dst->hw, hw);

Fixes: 035a61c314eb3 ("clk: Make clk API return per-user struct clk instances")
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Michael Turquette <mturquette@linaro.org>

show more ...

clk: st: STiH410: Fix pdiv and fdiv divisor when setting rate

Debugging eMMC on upstream kernels it has been noticed that when the
targetpack configures MMC0 clock to 200Mhz (required to switch to
H

clk: st: STiH410: Fix pdiv and fdiv divisor when setting rate

Debugging eMMC on upstream kernels it has been noticed that when the
targetpack configures MMC0 clock to 200Mhz (required to switch to
HS200) then everything works OK. However if the kernel sets the
clock rate using clk_set_rate, then the eMMC card initialisation
fails with timeouts. Lower clock speeds (the default being 50Mhz)
work ok, but they we fail to get good eMMC transfer rates.

Looking through the vendor kernel clock driver reveals Giuseppe
had already fixed this issue, but the patch hasn't made its way
upstream.

The issue is fixed by changing the logic to manage the pdiv and
fdiv divisors used for setting the rate inside the flexgen driver code.

Pdiv is mainly targeted for low freq results, while fdiv should be
used for divs =< 64. The other way can lead to 'duty cycle'
issues.

I have changed the original patch to keep the original behaviour
in cases where the div is >64 which matches the original comment
and patch description more closely. Although no clocks appear to hit
this case currently when booting an upstream kernel.

Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: Michael Turquette <mturquette@linaro.org>

show more ...

clk: st: STiH407: Support for Flexgen Clocks

This patch is the Flexgen implementation reusing as much as possible
of Common Clock Framework functions.

The idea is to have an instance of "struct fle

clk: st: STiH407: Support for Flexgen Clocks

This patch is the Flexgen implementation reusing as much as possible
of Common Clock Framework functions.

The idea is to have an instance of "struct flexgen" per output clock.
It represents the clock cross bar (by a mux element), and the pre and final dividers
(using dividers and gates elements).

Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
Signed-off-by: Olivier Bideau <olivier.bideau@st.com>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
Acked-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>

show more ...

clk: clk-flexgen: fix clock-critical handling

Fixes an issue leading to having all clocks following a critical
clocks marked as well as criticals.

Fixes: fa6415affe20 ("clk: st:

clk: clk-flexgen: fix clock-critical handling

Fixes an issue leading to having all clocks following a critical
clocks marked as well as criticals.

Fixes: fa6415affe20 ("clk: st: clk-flexgen: Detect critical clocks")
Signed-off-by: Alain Volmat <avolmat@me.com>
Link: https://lkml.kernel.org/r/20200322140740.3970-1-avolmat@me.com
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

show more ...

clk: st: clk-flexgen: Add of_node_put() in st_of_flexgen_setup()

In function st_of_flexgen_setup, variable pnode takes the return value
of of_get_parent, which gets a node but does not p

clk: st: clk-flexgen: Add of_node_put() in st_of_flexgen_setup()

In function st_of_flexgen_setup, variable pnode takes the return value
of of_get_parent, which gets a node but does not put it. If pnode is not
put before the function returns, it may cause a memory leak. Hence put
pnode after its last occurrence.
Issue found with Coccinelle.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lkml.kernel.org/r/20190804163151.6511-1-nishkadg.linux@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

show more ...