Revision tags: v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45, v6.1.44, v6.1.43, v6.1.42, v6.1.41, v6.1.40, v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35, v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22 |
|
#
5e96c2e0 |
| 27-Mar-2023 |
Nikita Yushchenko <nikita.yoush@cogentembedded.com> |
clk: renesas: r8a77980: Add I2C5 clock
The MSSR clock definition for I2C5 was missing. Add it.
Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <g
clk: renesas: r8a77980: Add I2C5 clock
The MSSR clock definition for I2C5 was missing. Add it.
Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20230328033902.830269-1-nikita.yoush@cogentembedded.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
show more ...
|
Revision tags: v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2 |
|
#
85af88b8 |
| 16-Feb-2023 |
Geert Uytterhoeven <geert+renesas@glider.be> |
clk: renesas: r8a77980: Add Z2 clock
Add support for the Z2 (Cortex-A53 System CPU) clock on R-Car V3H, which uses a fixed SYS-CPU divider.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.b
clk: renesas: r8a77980: Add Z2 clock
Add support for the Z2 (Cortex-A53 System CPU) clock on R-Car V3H, which uses a fixed SYS-CPU divider.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/aad9eaa57acf65cbe43e4d374066a72d760d54d8.1676560357.git.geert+renesas@glider.be
show more ...
|
Revision tags: v6.1.12 |
|
#
3c876432 |
| 11-Feb-2023 |
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> |
clk: renesas: r8a77980: Add VIN clocks
Add the VIN module clocks, which are used by the VIN modules on the Renesas R-Car V3H (R8A77980) SoC.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesa
clk: renesas: r8a77980: Add VIN clocks
Add the VIN module clocks, which are used by the VIN modules on the Renesas R-Car V3H (R8A77980) SoC.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20230211153026.3898491-1-niklas.soderlund+renesas@ragnatech.se Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
show more ...
|
Revision tags: v6.1.11, v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70, v5.15.69, v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62, v5.15.61, v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55, v5.15.54, v5.15.53, v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48, v5.15.47, v5.15.46, v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34 |
|
#
880c3fa3 |
| 11-Apr-2022 |
Geert Uytterhoeven <geert+renesas@glider.be> |
clk: renesas: Move RPC core clocks
The RPC and RPCD2 core clocks were added to the sections for internal core clocks, while they are core clock outputs, visible from DT.
Move them to the correct se
clk: renesas: Move RPC core clocks
The RPC and RPCD2 core clocks were added to the sections for internal core clocks, while they are core clock outputs, visible from DT.
Move them to the correct sections. Rename the ".rpc" clock on R-Car S4 to "rpc". Fixup nearby whitespace to increase uniformity.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/a938b938f00939b9206d7fbaba78e2ef09915f5f.1649681891.git.geert+renesas@glider.be
show more ...
|
Revision tags: v5.15.33, v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.16, v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2 |
|
#
1abd0448 |
| 10-Nov-2021 |
Wolfram Sang <wsa+renesas@sang-engineering.com> |
clk: renesas: rcar-gen3: Add SDnH clock
Currently a pass-through clock but we will make it a real divider clock in the next patches.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> L
clk: renesas: rcar-gen3: Add SDnH clock
Currently a pass-through clock but we will make it a real divider clock in the next patches.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20211110191610.5664-3-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
show more ...
|
Revision tags: v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47 |
|
#
f23f1101 |
| 16-Jun-2020 |
Ulrich Hecht <uli+renesas@fpond.eu> |
clk: renesas: rcar-gen3: Mark RWDT clocks as critical
Ensures RWDT remains alert throughout the boot process if enabled.
This patch applies the change to the following SoCs: r8a77950, r8a77951, r8a
clk: renesas: rcar-gen3: Mark RWDT clocks as critical
Ensures RWDT remains alert throughout the boot process if enabled.
This patch applies the change to the following SoCs: r8a77950, r8a77951, r8a77960, r8a77961, r8a77965, r8a77970, r8a77980, r8a77990 and r8a77995.
Signed-off-by: Ulrich Hecht <uli+renesas@fpond.eu> Link: https://lore.kernel.org/r/20200616162626.27944-3-uli+renesas@fpond.eu Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
show more ...
|
Revision tags: v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4, v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7, v5.2.6, v5.2.5, v5.2.4, v5.2.3, v5.2.2, v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8, v5.1.7, v5.1.6, v5.1.5, v5.1.4, v5.1.3, v5.1.2, v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11, v5.0.10, v5.0.9, v5.0.8, v5.0.7, v5.0.6, v5.0.5, v5.0.4, v5.0.3, v4.19.29, v5.0.2, v4.19.28, v5.0.1 |
|
#
21ab095c |
| 07-Mar-2019 |
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> |
clk: renesas: r8a77980: Fix RPC-IF module clock's parent
Testing has shown that the RPC-IF module clock's parent is the RPCD2 clock, not the RPC one -- the RPC-IF register reads stall otherwise...
clk: renesas: r8a77980: Fix RPC-IF module clock's parent
Testing has shown that the RPC-IF module clock's parent is the RPCD2 clock, not the RPC one -- the RPC-IF register reads stall otherwise...
Fixes: 94e3935b5756 ("clk: renesas: r8a77980: Add RPC clocks") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
show more ...
|
Revision tags: v4.19.27, v5.0, v4.19.26, v4.19.25, v4.19.24, v4.19.23, v4.19.22, v4.19.21, v4.19.20, v4.19.19, v4.19.18, v4.19.17 |
|
#
94e3935b |
| 22-Jan-2019 |
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> |
clk: renesas: r8a77980: Add RPC clocks
Describe the RPCSRC internal clock and the RPC[D2] clocks derived from it, as well as the RPC-IF module clock, in the R-Car V3H (R8A77980) CPG/MSSR driver.
Si
clk: renesas: r8a77980: Add RPC clocks
Describe the RPCSRC internal clock and the RPC[D2] clocks derived from it, as well as the RPC-IF module clock, in the R-Car V3H (R8A77980) CPG/MSSR driver.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
show more ...
|
Revision tags: v4.19.16, v4.19.15, v4.19.14, v4.19.13, v4.19.12, v4.19.11, v4.19.10, v4.19.9, v4.19.8, v4.19.7, v4.19.6, v4.19.5, v4.19.4, v4.18.20, v4.19.3, v4.18.19, v4.19.2, v4.18.18, v4.18.17, v4.19.1, v4.19, v4.18.16, v4.18.15, v4.18.14, v4.18.13, v4.18.12, v4.18.11, v4.18.10, v4.18.9, v4.18.7, v4.18.6 |
|
#
0a87bf6c |
| 01-Sep-2018 |
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> |
clk: renesas: r8a77980: Add CMT clocks
Now that RCLK has been added by Geert, we can add the CMT module clocks.
Based on the original (and large) patch by Vladimir Barinov.
Signed-off-by: Vladimir
clk: renesas: r8a77980: Add CMT clocks
Now that RCLK has been added by Geert, we can add the CMT module clocks.
Based on the original (and large) patch by Vladimir Barinov.
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
show more ...
|
Revision tags: v4.18.5, v4.17.18, v4.18.4, v4.18.3, v4.17.17, v4.18.2, v4.17.16, v4.17.15, v4.18.1, v4.18, v4.17.14, v4.17.13, v4.17.12, v4.17.11, v4.17.10, v4.17.9, v4.17.8, v4.17.7, v4.17.6 |
|
#
f3824deb |
| 11-Jul-2018 |
Geert Uytterhoeven <geert+renesas@glider.be> |
clk: renesas: r8a77980: Add RCLK for watchdog timer
On R-Car V3H, RCLK can be switched between EXTALR and the On-Chip Oscillator using mode pin MD19.
Signed-off-by: Geert Uytterhoeven <geert+renesa
clk: renesas: r8a77980: Add RCLK for watchdog timer
On R-Car V3H, RCLK can be switched between EXTALR and the On-Chip Oscillator using mode pin MD19.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
show more ...
|
#
3a251270 |
| 11-Jul-2018 |
Geert Uytterhoeven <geert+renesas@glider.be> |
clk: renesas: r8a77980: Add OSC predivider configuration and clock
R-Car Gen3 Hardware Manual Rev.0.54 documents the relation between the MD13 and MD14 mode pins, and the OSC EXTAL predivider, as us
clk: renesas: r8a77980: Add OSC predivider configuration and clock
R-Car Gen3 Hardware Manual Rev.0.54 documents the relation between the MD13 and MD14 mode pins, and the OSC EXTAL predivider, as used by the OSC clock. Hence augment the configuration structure with all documented predivider values.
Add the OSC clock using the configured predivider.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
show more ...
|
Revision tags: v4.17.5, v4.17.4, v4.17.3, v4.17.2, v4.17.1, v4.17 |
|
#
246e2324 |
| 09-Apr-2018 |
Geert Uytterhoeven <geert+renesas@glider.be> |
clk: renesas: r8a77980: Correct parent clock of PCIEC0
According to the R-Car Gen3 Hardware Manual Errata for Rev 0.80 of December 22, 2017, the parent clock of the PCIe module clock on R-Car V3H is
clk: renesas: r8a77980: Correct parent clock of PCIEC0
According to the R-Car Gen3 Hardware Manual Errata for Rev 0.80 of December 22, 2017, the parent clock of the PCIe module clock on R-Car V3H is S2D2.
Fixes: ce15783c510a9905 ("clk: renesas: cpg-mssr: add R8A77980 support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
show more ...
|
Revision tags: v4.16 |
|
#
ce15783c |
| 15-Feb-2018 |
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> |
clk: renesas: cpg-mssr: add R8A77980 support
Add R-Car V3H (R8A77980) Clock Pulse Generator / Module Standby and Software Reset support, using the CPG/MSSR driver core and the common R-Car Gen3 cod
clk: renesas: cpg-mssr: add R8A77980 support
Add R-Car V3H (R8A77980) Clock Pulse Generator / Module Standby and Software Reset support, using the CPG/MSSR driver core and the common R-Car Gen3 code.
Based on the original (and large) patch by Vladimir Barinov.
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
show more ...
|
Revision tags: v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47 |
|
#
f23f1101 |
| 16-Jun-2020 |
Ulrich Hecht <uli+renesas@fpond.eu> |
clk: renesas: rcar-gen3: Mark RWDT clocks as critical Ensures RWDT remains alert throughout the boot process if enabled. This patch applies the change to the following SoCs: r8a7795
clk: renesas: rcar-gen3: Mark RWDT clocks as critical Ensures RWDT remains alert throughout the boot process if enabled. This patch applies the change to the following SoCs: r8a77950, r8a77951, r8a77960, r8a77961, r8a77965, r8a77970, r8a77980, r8a77990 and r8a77995. Signed-off-by: Ulrich Hecht <uli+renesas@fpond.eu> Link: https://lore.kernel.org/r/20200616162626.27944-3-uli+renesas@fpond.eu Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
show more ...
|
Revision tags: v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4, v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7, v5.2.6, v5.2.5, v5.2.4, v5.2.3, v5.2.2, v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8, v5.1.7, v5.1.6, v5.1.5, v5.1.4, v5.1.3, v5.1.2, v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11, v5.0.10, v5.0.9, v5.0.8, v5.0.7, v5.0.6, v5.0.5, v5.0.4, v5.0.3, v4.19.29, v5.0.2, v4.19.28, v5.0.1 |
|
#
21ab095c |
| 07-Mar-2019 |
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> |
clk: renesas: r8a77980: Fix RPC-IF module clock's parent Testing has shown that the RPC-IF module clock's parent is the RPCD2 clock, not the RPC one -- the RPC-IF register reads stall ot
clk: renesas: r8a77980: Fix RPC-IF module clock's parent Testing has shown that the RPC-IF module clock's parent is the RPCD2 clock, not the RPC one -- the RPC-IF register reads stall otherwise... Fixes: 94e3935b5756 ("clk: renesas: r8a77980: Add RPC clocks") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
show more ...
|
Revision tags: v4.19.27, v5.0, v4.19.26, v4.19.25, v4.19.24, v4.19.23, v4.19.22, v4.19.21, v4.19.20, v4.19.19, v4.19.18, v4.19.17 |
|
#
94e3935b |
| 22-Jan-2019 |
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> |
clk: renesas: r8a77980: Add RPC clocks Describe the RPCSRC internal clock and the RPC[D2] clocks derived from it, as well as the RPC-IF module clock, in the R-Car V3H (R8A77980) CPG/MSSR
clk: renesas: r8a77980: Add RPC clocks Describe the RPCSRC internal clock and the RPC[D2] clocks derived from it, as well as the RPC-IF module clock, in the R-Car V3H (R8A77980) CPG/MSSR driver. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
show more ...
|
Revision tags: v4.19.16, v4.19.15, v4.19.14, v4.19.13, v4.19.12, v4.19.11, v4.19.10, v4.19.9, v4.19.8, v4.19.7, v4.19.6, v4.19.5, v4.19.4, v4.18.20, v4.19.3, v4.18.19, v4.19.2, v4.18.18, v4.18.17, v4.19.1, v4.19, v4.18.16, v4.18.15, v4.18.14, v4.18.13, v4.18.12, v4.18.11, v4.18.10, v4.18.9, v4.18.7, v4.18.6 |
|
#
0a87bf6c |
| 01-Sep-2018 |
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> |
clk: renesas: r8a77980: Add CMT clocks Now that RCLK has been added by Geert, we can add the CMT module clocks. Based on the original (and large) patch by Vladimir Barinov.
clk: renesas: r8a77980: Add CMT clocks Now that RCLK has been added by Geert, we can add the CMT module clocks. Based on the original (and large) patch by Vladimir Barinov. Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
show more ...
|
Revision tags: v4.18.5, v4.17.18, v4.18.4, v4.18.3, v4.17.17, v4.18.2, v4.17.16, v4.17.15, v4.18.1, v4.18, v4.17.14, v4.17.13, v4.17.12, v4.17.11, v4.17.10, v4.17.9, v4.17.8, v4.17.7, v4.17.6 |
|
#
f3824deb |
| 11-Jul-2018 |
Geert Uytterhoeven <geert+renesas@glider.be> |
clk: renesas: r8a77980: Add RCLK for watchdog timer On R-Car V3H, RCLK can be switched between EXTALR and the On-Chip Oscillator using mode pin MD19. Signed-off-by: Geert Uytter
clk: renesas: r8a77980: Add RCLK for watchdog timer On R-Car V3H, RCLK can be switched between EXTALR and the On-Chip Oscillator using mode pin MD19. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
show more ...
|
#
3a251270 |
| 11-Jul-2018 |
Geert Uytterhoeven <geert+renesas@glider.be> |
clk: renesas: r8a77980: Add OSC predivider configuration and clock R-Car Gen3 Hardware Manual Rev.0.54 documents the relation between the MD13 and MD14 mode pins, and the OSC EXTAL predi
clk: renesas: r8a77980: Add OSC predivider configuration and clock R-Car Gen3 Hardware Manual Rev.0.54 documents the relation between the MD13 and MD14 mode pins, and the OSC EXTAL predivider, as used by the OSC clock. Hence augment the configuration structure with all documented predivider values. Add the OSC clock using the configured predivider. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
show more ...
|
Revision tags: v4.17.5, v4.17.4, v4.17.3, v4.17.2, v4.17.1, v4.17 |
|
#
246e2324 |
| 09-Apr-2018 |
Geert Uytterhoeven <geert+renesas@glider.be> |
clk: renesas: r8a77980: Correct parent clock of PCIEC0 According to the R-Car Gen3 Hardware Manual Errata for Rev 0.80 of December 22, 2017, the parent clock of the PCIe module clock on
clk: renesas: r8a77980: Correct parent clock of PCIEC0 According to the R-Car Gen3 Hardware Manual Errata for Rev 0.80 of December 22, 2017, the parent clock of the PCIe module clock on R-Car V3H is S2D2. Fixes: ce15783c510a9905 ("clk: renesas: cpg-mssr: add R8A77980 support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
show more ...
|
Revision tags: v4.16 |
|
#
ce15783c |
| 15-Feb-2018 |
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> |
clk: renesas: cpg-mssr: add R8A77980 support Add R-Car V3H (R8A77980) Clock Pulse Generator / Module Standby and Software Reset support, using the CPG/MSSR driver core and the common
clk: renesas: cpg-mssr: add R8A77980 support Add R-Car V3H (R8A77980) Clock Pulse Generator / Module Standby and Software Reset support, using the CPG/MSSR driver core and the common R-Car Gen3 code. Based on the original (and large) patch by Vladimir Barinov. Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
show more ...
|