clk: renesas: Add RZ/V2M support using the rzg2l driver

The Renesas RZ/V2M SoC is very similar to RZ/G2L, though it doesn't have
any CLK_MON registers.

Signed-off-by: Phil Edworthy <phil.edworthy@r

clk: renesas: Add RZ/V2M support using the rzg2l driver

The Renesas RZ/V2M SoC is very similar to RZ/G2L, though it doesn't have
any CLK_MON registers.

Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20220503115557.53370-11-phil.edworthy@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

show more ...

clk: renesas: cpg-mssr: Add support for R-Car V4H

Initial CPG support for R-Car V4H (r8a779g0).

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/2

clk: renesas: cpg-mssr: Add support for R-Car V4H

Initial CPG support for R-Car V4H (r8a779g0).

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20220428135058.597586-2-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

show more ...

clk: renesas: Add support for RZ/G2UL SoC

The clock structure for RZ/G2UL is almost identical to RZ/G2L SoC with
fewer IP blocks. The IP blocks such as WDT1, GPT, H264, GPU and POEG are
not present

clk: renesas: Add support for RZ/G2UL SoC

The clock structure for RZ/G2UL is almost identical to RZ/G2L SoC with
fewer IP blocks. The IP blocks such as WDT1, GPT, H264, GPU and POEG are
not present on RZ/G2UL.

This patch adds minimal clock and reset entries required to boot the
system on Renesas RZ/G2UL SMARC EVK and binds it with the RZ/G2L CPG core
driver.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20220412161314.13800-2-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

show more ...

clk: renesas: rzg2l-cpg: Add support for RZ/V2L SoC

The clock structure for RZ/V2L is almost identical to the RZ/G2L SoC.
The only difference being that RZ/V2L has additional registers to
control cl

clk: renesas: rzg2l-cpg: Add support for RZ/V2L SoC

The clock structure for RZ/V2L is almost identical to the RZ/G2L SoC.
The only difference being that RZ/V2L has additional registers to
control clocks and resets for the DRP-AI block.

Reuse r9a07g044-cpg.c, as the clock IDs and reset IDs are the same
between RZ/G2L and RZ/V2L, and add a separate r9a07g054_cpg_info to take
care of the DRP-AI clocks/resets.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20220205084006.7142-1-biju.das.jz@bp.renesas.com
Link: https://lore.kernel.org/r/20220209203411.22332-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

show more ...

clk: renesas: cpg-mssr: Add support for R-Car S4-8

Initial CPG support for R-Car S4-8 (r8a779f0).

Inspired by patches in the BSP by LUU HOAI.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh

clk: renesas: cpg-mssr: Add support for R-Car S4-8

Initial CPG support for R-Car S4-8 (r8a779f0).

Inspired by patches in the BSP by LUU HOAI.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20211201073308.1003945-10-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

show more ...

clk: renesas: rcar-gen4: Introduce R-Car Gen4 CPG driver

According to the official website [1], the R-Car V3U SoC is based
on the R-Car Gen4 architecture. So, introduce R-Car Gen4 CPG
driver.

[1]
h

clk: renesas: rcar-gen4: Introduce R-Car Gen4 CPG driver

According to the official website [1], the R-Car V3U SoC is based
on the R-Car Gen4 architecture. So, introduce R-Car Gen4 CPG
driver.

[1]
https://www.renesas.com/us/en/products/automotive-products/automotive-system-chips-socs/r-car-v3u-best-class-r-car-v3u-asil-d-system-chip-automated-driving

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20211201073308.1003945-9-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

show more ...

clk: renesas: Rename renesas-rzg2l-cpg.[ch] to rzg2l-cpg.[ch]

Rename renesas-rzg2l-cpg.c and renesas-rzg2l-cpg.h to rzg2l-cpg.c resp.
rzg2l-cpg.h, for consistency with other (sub)drivers.

Signed-of

clk: renesas: Rename renesas-rzg2l-cpg.[ch] to rzg2l-cpg.[ch]

Rename renesas-rzg2l-cpg.c and renesas-rzg2l-cpg.h to rzg2l-cpg.c resp.
rzg2l-cpg.h, for consistency with other (sub)drivers.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/edc442daaedffcf10e835ff479d906fcae0e59db.1626268821.git.geert+renesas@glider.be

show more ...

clk: renesas: Add support for R9A07G044 SoC

Define the clock outputs supported by RZ/G2L (R9A07G044) SoC
and bind it with RZ/G2L CPG core.

Based on a patch in the BSP by Binh Nguyen
<binh.nguyen.jz

clk: renesas: Add support for R9A07G044 SoC

Define the clock outputs supported by RZ/G2L (R9A07G044) SoC
and bind it with RZ/G2L CPG core.

Based on a patch in the BSP by Binh Nguyen
<binh.nguyen.jz@renesas.com>.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20210609153230.6967-10-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

show more ...

clk: renesas: Add CPG core wrapper for RZ/G2L SoC

Add CPG core wrapper for RZ/G2L family.

Based on a patch in the BSP by Binh Nguyen
<binh.nguyen.jz@renesas.com>.

Signed-off-by: Lad Prabhakar <pra

clk: renesas: Add CPG core wrapper for RZ/G2L SoC

Add CPG core wrapper for RZ/G2L family.

Based on a patch in the BSP by Binh Nguyen
<binh.nguyen.jz@renesas.com>.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20210609153230.6967-9-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

show more ...

clk: renesas: rcar-gen3: Factor out CPG library

R-Car V3U has a CPG different enough to not be a generic Gen3 CPG but
similar enough to reuse code. Introduce a new CPG library, factor out
the SD clo

clk: renesas: rcar-gen3: Factor out CPG library

R-Car V3U has a CPG different enough to not be a generic Gen3 CPG but
similar enough to reuse code. Introduce a new CPG library, factor out
the SD clock handling and hook it to the generic Gen3 CPG driver so we
have an equal state. V3U will make use of it in the next patch then.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20201227174202.40834-4-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

show more ...

clk: renesas: cpg-mssr: Add support for R-Car V3U

Initial support for R-Car V3U (r8a779a0), including core, module
clocks, resets, and register access, because register specification
differs from R-

clk: renesas: cpg-mssr: Add support for R-Car V3U

Initial support for R-Car V3U (r8a779a0), including core, module
clocks, resets, and register access, because register specification
differs from R-Car Gen2/3.

Inspired by patches in the BSP by LUU HOAI.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/1599810232-29035-4-git-send-email-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

show more ...

clk: renesas: cpg-mssr: Add r8a774e1 support

Add support for the RZ/G2H (R8A774E1) SoC to the Renesas Clock
Pulse Generator / Module Standby and Software Reset driver.

Signed-off-by: Marian-Cristia

clk: renesas: cpg-mssr: Add r8a774e1 support

Add support for the RZ/G2H (R8A774E1) SoC to the Renesas Clock
Pulse Generator / Module Standby and Software Reset driver.

Signed-off-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/1594138692-16816-11-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com
[geert: Mark RWDT critical, cfr. commit f23f1101ad0ef1ac ("clk: renesas: rcar-gen3: Mark RWDT clocks as critical")]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

show more ...

clk: renesas: cpg-mssr: Add R8A7742 support

Add RZ/G1H (R8A7742) Clock Pulse Generator / Module Standby and Software
Reset support, using the CPG/MSSR driver core and the common R-Car Gen2
(and RZ/G

clk: renesas: cpg-mssr: Add R8A7742 support

Add RZ/G1H (R8A7742) Clock Pulse Generator / Module Standby and Software
Reset support, using the CPG/MSSR driver core and the common R-Car Gen2
(and RZ/G) code.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Link: https://lore.kernel.org/r/1587998460-7804-1-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

show more ...

clk: renesas: r8a7796: Add R8A77961 CPG/MSSR support

Add support for the R-Car M3-W+ (R8A77961) SoC to the Renesas Clock
Pulse Generator / Module Standby and Software Reset driver.

R-Car M3-W+ is v

clk: renesas: r8a7796: Add R8A77961 CPG/MSSR support

Add support for the R-Car M3-W+ (R8A77961) SoC to the Renesas Clock
Pulse Generator / Module Standby and Software Reset driver.

R-Car M3-W+ is very similar to R-Car M3-W (R8A77960), which allows for
both SoCs to share a driver. R-Car M3-W+ lacks a few modules, so their
clocks must be nullified.

Based on a patch in the BSP by Takeshi Kihara
<takeshi.kihara.df@renesas.com>.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20191023122941.12342-5-geert+renesas@glider.be

show more ...

clk: renesas: Rename CLK_R8A7796 to CLK_R8A77960

Rename CONFIG_CLK_R8A7796 for R-Car M3-W (R8A77960) to
CONFIG_CLK_R8A77960, to avoid confusion with R-Car M3-W+ (R8A77961),
which will use CONFIG_CLK

clk: renesas: Rename CLK_R8A7796 to CLK_R8A77960

Rename CONFIG_CLK_R8A7796 for R-Car M3-W (R8A77960) to
CONFIG_CLK_R8A77960, to avoid confusion with R-Car M3-W+ (R8A77961),
which will use CONFIG_CLK_R8A77961.

Extend the dependency of CONFIG_CLK_R8A77960 from CONFIG_ARCH_R8A7796 to
CONFIG_ARCH_R8A77960, to relax dependencies for a future rename of the
SoC configuration symbol.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20191023122941.12342-4-geert+renesas@glider.be

show more ...

clk: renesas: cpg-mssr: Add r8a774b1 support

Add RZ/G2N (R8A774B1) Clock Pulse Generator / Module Standby and Software
Reset support.

Based on the Table 8.4d of "RZ/G Series, 2nd Generation User's

clk: renesas: cpg-mssr: Add r8a774b1 support

Add RZ/G2N (R8A774B1) Clock Pulse Generator / Module Standby and Software
Reset support.

Based on the Table 8.4d of "RZ/G Series, 2nd Generation User's Manual:
Hardware (Rev. 0.80, May 2019)".

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Link: https://lore.kernel.org/r/1568881036-4404-7-git-send-email-biju.das@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

show more ...

clk: renesas: Remove R-Car Gen2 legacy DT clock support

As of commit 362b334b17943d84 ("ARM: dts: r8a7791: Convert to new
CPG/MSSR bindings"), all upstream R-Car Gen2 device tree source files
use th

clk: renesas: Remove R-Car Gen2 legacy DT clock support

As of commit 362b334b17943d84 ("ARM: dts: r8a7791: Convert to new
CPG/MSSR bindings"), all upstream R-Car Gen2 device tree source files
use the unified "Renesas Clock Pulse Generator / Module Standby and
Software Reset" DT bindings.

Hence remove backward compatibility with old R-Car Gen2 device trees
describing a hierarchical representation of the various CPG and MSTP
clocks.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Link: https://lore.kernel.org/r/20190830133615.11274-1-geert+renesas@glider.be

show more ...

clk: renesas: cpg-mssr: Add r8a774c0 support

Add RZ/G2E (R8A774C0) Clock Pulse Generator / Module Standby and
Software Reset support.

Based on Table 8.2g of "RZ/G Series, 2nd Generation User's Manu

clk: renesas: cpg-mssr: Add r8a774c0 support

Add RZ/G2E (R8A774C0) Clock Pulse Generator / Module Standby and
Software Reset support.

Based on Table 8.2g of "RZ/G Series, 2nd Generation User's Manual:
Hardware (Rev. 0.61, June 12, 2018)".

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

show more ...

clk: renesas: cpg-mssr: Add R7S9210 support

Add support for the R7S9210 (RZ/A2) Clock Pulse Generator and Module
Standby.

The Module Standby HW in the RZ/A series is very close to R-Car HW, except

clk: renesas: cpg-mssr: Add R7S9210 support

Add support for the R7S9210 (RZ/A2) Clock Pulse Generator and Module
Standby.

The Module Standby HW in the RZ/A series is very close to R-Car HW, except
for how the registers are laid out.
The MSTP registers are only 8-bits wide, there are no status registers
(MSTPSR), and the register offsets are a little different. Since the RZ/A
hardware manuals refer to these registers as the Standby Control Registers,
we'll use that name to distinguish the RZ/A type from the R-Car type.

Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Acked-by: Rob Herring <robh@kernel.org> # DT bits
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

show more ...

clk: renesas: cpg-mssr: Add r8a774a1 support

Add RZ/G2M (R8A774A1) Clock Pulse Generator / Module Standby and Software
Reset support.

Based on the Table 8.2b of "RZ/G Series, 2nd Generation User's

clk: renesas: cpg-mssr: Add r8a774a1 support

Add RZ/G2M (R8A774A1) Clock Pulse Generator / Module Standby and Software
Reset support.

Based on the Table 8.2b of "RZ/G Series, 2nd Generation User's Manual:
Hardware ((Rev. 0.61, June 12, 2018)".

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

show more ...

clk: renesas: Renesas R9A06G032 clock driver

This provides a clock driver for the Renesas R09A06G032.
This uses a structure derived from both the R-Car Gen2 driver as well as
the renesas-cpg-mssr dr

clk: renesas: Renesas R9A06G032 clock driver

This provides a clock driver for the Renesas R09A06G032.
This uses a structure derived from both the R-Car Gen2 driver as well as
the renesas-cpg-mssr driver.

Signed-off-by: Michel Pollet <michel.pollet@bp.renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

show more ...

clk: renesas: cpg-mssr: Add support for R-Car E3

Initial support for R-Car E3 (r8a77990), including core and module
clocks.

Based on the Table 8.2g of "R-Car Series, 3rd Generation User's Manual:
H

clk: renesas: cpg-mssr: Add support for R-Car E3

Initial support for R-Car E3 (r8a77990), including core and module
clocks.

Based on the Table 8.2g of "R-Car Series, 3rd Generation User's Manual:
Hardware ((Rev. 0.80, Oct 31, 2017) with Manual Errata on Feb. 28, 2018".

Inspried by patches by Takeshi Kihara in the BSP.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

show more ...

clk: renesas: cpg-mssr: Add r8a77470 support

Add RZ/G1C (R8A77470) Clock Pulse Generator / Module Standby and Software
Reset support.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by:

clk: renesas: cpg-mssr: Add r8a77470 support

Add RZ/G1C (R8A77470) Clock Pulse Generator / Module Standby and Software
Reset support.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

show more ...

clk: renesas: cpg-mssr: Add support for R-Car M3-N

Initial support for R-Car M3-N (r8a77965), including core and module
clocks.

Based on Table 8.2d of "R-Car Series, 3rd Generation User's Manual:
H

clk: renesas: cpg-mssr: Add support for R-Car M3-N

Initial support for R-Car M3-N (r8a77965), including core and module
clocks.

Based on Table 8.2d of "R-Car Series, 3rd Generation User's Manual:
Hardware (Rev. 0.80, Oct 31, 2017)".

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

show more ...

clk: renesas: cpg-mssr: add R8A77980 support

Add R-Car V3H (R8A77980) Clock Pulse Generator / Module Standby and
Software Reset support, using the CPG/MSSR driver core and the common
R-Car Gen3 cod

clk: renesas: cpg-mssr: add R8A77980 support

Add R-Car V3H (R8A77980) Clock Pulse Generator / Module Standby and
Software Reset support, using the CPG/MSSR driver core and the common
R-Car Gen3 code.

Based on the original (and large) patch by Vladimir Barinov.

Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

show more ...