clk: imx8mm: Let IMX8MM_CLK_LCDIF_PIXEL set parent rate

By default the display pixel clock needs to be evenly divide
down from 594MHz which rules out a significant number of
resolution and refresh r

clk: imx8mm: Let IMX8MM_CLK_LCDIF_PIXEL set parent rate

By default the display pixel clock needs to be evenly divide
down from 594MHz which rules out a significant number of
resolution and refresh rates.
The current clock tree looks something like:

video_pll1 594000000
video_pll1_bypass 594000000
video_pll1_out 594000000
lcdif_pixel 148500000

Now that composite-8m supports determine_rate, we can allow
lcdif_pixel to set the parent rate which then switches
every clock in the chain to a new frequency when lcdif_pixel
cannot evenly divide from video_pll1_out.

Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20230323230127.120883-4-aford173@gmail.com

show more ...

clk: imx: remove clk_count of imx_register_uart_clocks

The clk count has been get with of_clk_get_parent_count, there is
no need to pass clk_count from users.

Signed-off-by: Peng Fan <peng.fan@nxp.

clk: imx: remove clk_count of imx_register_uart_clocks

The clk count has been get with of_clk_get_parent_count, there is
no need to pass clk_count from users.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20230104110032.1220721-4-peng.fan@oss.nxp.com

show more ...

clk: imx: rename imx_obtain_fixed_clk_hw() to imx_get_clk_hw_by_name()

The imx_obtain_fixed_clk_hw name was wrong and misleading. Renaming it
to imx_get_clk_hw_by_name clarifies the purpose of the f

clk: imx: rename imx_obtain_fixed_clk_hw() to imx_get_clk_hw_by_name()

The imx_obtain_fixed_clk_hw name was wrong and misleading. Renaming it
to imx_get_clk_hw_by_name clarifies the purpose of the function, and
will allow it to be used not only for fixed rate clocks but also in
wider contexts.

No functional changes intended.

The replacements were made with the following command:

grep -rl 'imx_obtain_fixed_clk_hw' ./ | \
xargs sed -i 's/imx_obtain_fixed_clk_hw/imx_get_clk_hw_by_name/g'

Tested on a BSH SystemMaster (SMM) S2 board.

Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20221113180839.1625832-1-dario.binacchi@amarulasolutions.com

show more ...

clk: imx: Remove the snvs clock

The SNVS moudule is not used only by the linux, it may also used
by other SW component is secure world. No sense to populate it
in linux, so remove it.

Signed-off-by

clk: imx: Remove the snvs clock

The SNVS moudule is not used only by the linux, it may also used
by other SW component is secure world. No sense to populate it
in linux, so remove it.

Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Link: https://lore.kernel.org/r/20220310093404.236966-1-ping.bai@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>

show more ...

clk: imx: add mcore_booted module paratemter

Add mcore_booted boot parameter which could simplify AMP clock
management. To i.MX8M, there is CCM(clock control Module) to generate
clock root clock, an

clk: imx: add mcore_booted module paratemter

Add mcore_booted boot parameter which could simplify AMP clock
management. To i.MX8M, there is CCM(clock control Module) to generate
clock root clock, anatop(analog PLL module) to generate PLL, and CCGR
(clock gating) to gate clocks to peripherals. As below:
anatop->ccm->ccgr->peripheral

Linux handles the clock management and the auxiliary core is under
control of Linux. Although there is per hardware domain control for CCGR
and CCM, auxiliary core normally only use CCGR hardware domain control
to avoid linux gate off the clk to peripherals and leave CCM ana anatop
to Linux.

Per NXP hardware design, because CCGR already support gate to
peripherals, and clk root gate power leakage is negligible. So
when in AMP case, we could not register the clk root gate.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Link: https://lore.kernel.org/r/20220228124112.3974242-1-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>

show more ...

clk: imx8mm: remove SYS PLL 1/2 clock gates

Remove the PLL 1/2 gates as it make AMP clock management harder without
obvious benifit.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Ves

clk: imx8mm: remove SYS PLL 1/2 clock gates

Remove the PLL 1/2 gates as it make AMP clock management harder without
obvious benifit.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Link: https://lore.kernel.org/r/20220225081733.2294166-2-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>

show more ...

clk: imx8m: fix clock tree update of TF-A managed clocks

On the i.MX8M*, the TF-A exposes a SiP (Silicon Provider) service
for DDR frequency scaling. The imx8m-ddrc-devfreq driver calls the
SiP and

clk: imx8m: fix clock tree update of TF-A managed clocks

On the i.MX8M*, the TF-A exposes a SiP (Silicon Provider) service
for DDR frequency scaling. The imx8m-ddrc-devfreq driver calls the
SiP and then does clk_set_parent on the DDR muxes to synchronize
the clock tree.

Since 936c383673b9 ("clk: imx: fix composite peripheral flags"),
these TF-A managed muxes have SET_PARENT_GATE set, which results
in imx8m-ddrc-devfreq's clk_set_parent after SiP failing with -EBUSY:

echo 25000000 > userspace/set_freq
imx8m-ddrc-devfreq 3d400000.memory-controller: failed to set
dram_apb parent: -16

Fix this by adding a new i.MX composite flag for firmware managed
clocks, which clears SET_PARENT_GATE.

This is safe to do, because updating the Linux clock tree to reflect
reality will always be glitch-free.

Fixes: 936c383673b9 ("clk: imx: fix composite peripheral flags")
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Link: https://lore.kernel.org/r/20210810151432.9228-1-a.fatoum@pengutronix.de
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>

show more ...

clk: imx8mm: use correct mux type for clkout path

The mux in the clkout path needs the current selected parent to
be enabled for the switch to work. Use the correct mux type
to have the clk framewor

clk: imx8mm: use correct mux type for clkout path

The mux in the clkout path needs the current selected parent to
be enabled for the switch to work. Use the correct mux type
to have the clk framework take care of this requirement.

Fixes: c1ae5c6f789a ("clk: imx8mm: add clkout1/2 support")
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Link: https://lore.kernel.org/r/20210628211554.2510238-1-l.stach@pengutronix.de
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>

show more ...

clk: imx: Fix reparenting of UARTs not associated with stdout

Most if not all i.MX SoC's call a function which enables all UARTS.
This is a problem for users who need to re-parent the clock source,

clk: imx: Fix reparenting of UARTs not associated with stdout

Most if not all i.MX SoC's call a function which enables all UARTS.
This is a problem for users who need to re-parent the clock source,
because any attempt to change the parent results in an busy error
due to the fact that the clocks have been enabled already.

clk: failed to reparent uart1 to sys_pll1_80m: -16

Instead of pre-initializing all UARTS, scan the device tree to see
which UART clocks are associated to stdout, and only enable those
UART clocks if it's needed early. This will move initialization of
the remaining clocks until after the parenting of the clocks.

When the clocks are shutdown, this mechanism will also disable any
clocks that were pre-initialized.

Fixes: 9461f7b33d11c ("clk: fix CLK_SET_RATE_GATE with clock rate protection")
Suggested-by: Aisheng Dong <aisheng.dong@nxp.com>
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Tested-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>

show more ...

clk: imx8mm: add clkout1/2 support

clkout1 and clkout2 allow to supply clocks from the SoC to the board,
which is used by some board designs to provide reference clocks.

Signed-off-by: Lucas Stach

clk: imx8mm: add clkout1/2 support

clkout1 and clkout2 allow to supply clocks from the SoC to the board,
which is used by some board designs to provide reference clocks.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

show more ...

clk: imx8mm: drop of_match_ptr from of_device_id table

The driver can match only via the DT table so the table should be always
used and the of_match_ptr does not have any sense (this also allows AC

clk: imx8mm: drop of_match_ptr from of_device_id table

The driver can match only via the DT table so the table should be always
used and the of_match_ptr does not have any sense (this also allows ACPI
matching via PRP0001, even though it might be not relevant here). This
fixes compile warning (!CONFIG_OF && !CONFIG_MODULES):

drivers/clk/imx/clk-imx8mm.c:641:34: warning:
‘imx8mm_clk_of_match’ defined but not used [-Wunused-const-variable=]

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

show more ...

clk: imx8m: fix clock tree update of TF-A managed clocks

[ Upstream commit d36207b848a6490e14664e2197a1c8ab51d8148e ]

On the i.MX8M*, the TF-A exposes a SiP (Silicon Provider) service
for DDR frequ

clk: imx8m: fix clock tree update of TF-A managed clocks

[ Upstream commit d36207b848a6490e14664e2197a1c8ab51d8148e ]

On the i.MX8M*, the TF-A exposes a SiP (Silicon Provider) service
for DDR frequency scaling. The imx8m-ddrc-devfreq driver calls the
SiP and then does clk_set_parent on the DDR muxes to synchronize
the clock tree.

Since 936c383673b9 ("clk: imx: fix composite peripheral flags"),
these TF-A managed muxes have SET_PARENT_GATE set, which results
in imx8m-ddrc-devfreq's clk_set_parent after SiP failing with -EBUSY:

echo 25000000 > userspace/set_freq
imx8m-ddrc-devfreq 3d400000.memory-controller: failed to set
dram_apb parent: -16

Fix this by adding a new i.MX composite flag for firmware managed
clocks, which clears SET_PARENT_GATE.

This is safe to do, because updating the Linux clock tree to reflect
reality will always be glitch-free.

Fixes: 936c383673b9 ("clk: imx: fix composite peripheral flags")
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Link: https://lore.kernel.org/r/20210810151432.9228-1-a.fatoum@pengutronix.de
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

clk: imx: Fix reparenting of UARTs not associated with stdout

[ Upstream commit 379c9a24cc239000b1dec53db02fe17a86947423 ]

Most if not all i.MX SoC's call a function which enables all UARTS.
This i

clk: imx: Fix reparenting of UARTs not associated with stdout

[ Upstream commit 379c9a24cc239000b1dec53db02fe17a86947423 ]

Most if not all i.MX SoC's call a function which enables all UARTS.
This is a problem for users who need to re-parent the clock source,
because any attempt to change the parent results in an busy error
due to the fact that the clocks have been enabled already.

clk: failed to reparent uart1 to sys_pll1_80m: -16

Instead of pre-initializing all UARTS, scan the device tree to see
which UART clocks are associated to stdout, and only enable those
UART clocks if it's needed early. This will move initialization of
the remaining clocks until after the parenting of the clocks.

When the clocks are shutdown, this mechanism will also disable any
clocks that were pre-initialized.

Fixes: 9461f7b33d11c ("clk: fix CLK_SET_RATE_GATE with clock rate protection")
Suggested-by: Aisheng Dong <aisheng.dong@nxp.com>
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Tested-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

clk: imx8m: fix bus critical clk registration

noc/axi/ahb are bus clk, not peripheral clk.
Since peripheral clk has a limitation that for peripheral clock slice,
IP clock slices must be stopped to c

clk: imx8m: fix bus critical clk registration

noc/axi/ahb are bus clk, not peripheral clk.
Since peripheral clk has a limitation that for peripheral clock slice,
IP clock slices must be stopped to change the clock source.

However if the bus clk is marked as critical clk peripheral, the
assigned clock parent operation will fail.

So we added CLK_SET_PARENT_GATE flag to avoid glitch.

And add imx8m_clk_hw_composite_bus_critical for bus critical clock usage

Fixes: 936c383673b9e ("clk: imx: fix composite peripheral flags")
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Reported-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/1604229834-25594-1-git-send-email-peng.fan@nxp.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

show more ...

clk: imx8m: Support module build

Change configuration to "tristate", add module author, description
and license to support building i.MX8M SoCs clock driver as module.

Signed-off-by: Anson Huang <A

clk: imx8m: Support module build

Change configuration to "tristate", add module author, description
and license to support building i.MX8M SoCs clock driver as module.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

show more ...

clk: imx: use imx8m_clk_hw_composite_bus for i.MX8M bus clk slice

Switch the bus clk use imx8m_clk_hw_composite_bus, then
we could avoid possible issue when setting mux of the clk.

Signed-off-by: P

clk: imx: use imx8m_clk_hw_composite_bus for i.MX8M bus clk slice

Switch the bus clk use imx8m_clk_hw_composite_bus, then
we could avoid possible issue when setting mux of the clk.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

show more ...

clk: imx8m: migrate A53 clk root to use composite core

Migrate A53 clk root to use composite core clk type. It
will simplify code and make it easy to use composite
specific mux operation.

Reviewed-

clk: imx8m: migrate A53 clk root to use composite core

Migrate A53 clk root to use composite core clk type. It
will simplify code and make it easy to use composite
specific mux operation.

Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

show more ...

clk: imx8m: drop clk_hw_set_parent for A53

The parent settings have been moved to dtsi, we no need to
set parent here. And clk_hw_set_parent will trigger lockdep warning,
because this api not have p

clk: imx8m: drop clk_hw_set_parent for A53

The parent settings have been moved to dtsi, we no need to
set parent here. And clk_hw_set_parent will trigger lockdep warning,
because this api not have prepare_lock.

Reported-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

show more ...

clk: imx8mm: A53 core clock no need to be critical

'A53_CORE' is just a mux and no need to be critical, being critical
will cause its parent clock always ON which does NOT make sense,
to make sure C

clk: imx8mm: A53 core clock no need to be critical

'A53_CORE' is just a mux and no need to be critical, being critical
will cause its parent clock always ON which does NOT make sense,
to make sure CPU's hardware clock source NOT being disabled during
clock tree setup, need to move the 'A53_SRC'/'A53_CORE' reparent
operations to after critical clock 'ARM_CLK' setup finished.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

show more ...

clk: imx: imx8mm: fix a53 cpu clock

The A53 CCM clk root only accepts input up to 1GHz, CCM A53 root
signoff timing is 1Ghz, however the A53 core which sources from CCM
root could run above 1GHz whi

clk: imx: imx8mm: fix a53 cpu clock

The A53 CCM clk root only accepts input up to 1GHz, CCM A53 root
signoff timing is 1Ghz, however the A53 core which sources from CCM
root could run above 1GHz which voilates the CCM.

There is a CORE_SEL slice before A53 core, we need configure the
CORE_SEL slice source from ARM PLL, not A53 CCM clk root.

The A53 CCM clk root should only be used when need to change ARM PLL
frequency.

Add arm_a53_core clk that could source from arm_a53_div and arm_pll_out.
Configure a53 ccm root sources from 800MHz sys pll
Configure a53 core sources from arm_pll_out
Mark arm_a53_core as critical clock

Fixes: ba5625c3e272 ("clk: imx: Add clock driver support for imx8mm")
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

show more ...

clk: imx8mm: Remove unused includes

There is nothing in use from init.h/of.h, remove them.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-b

clk: imx8mm: Remove unused includes

There is nothing in use from init.h/of.h, remove them.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

show more ...

clk: imx8mm: Add missing of_node_put()

After finishing using device node got from of_find_compatible_node(),
of_node_put() needs to be called.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Revie

clk: imx8mm: Add missing of_node_put()

After finishing using device node got from of_find_compatible_node(),
of_node_put() needs to be called.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

show more ...

clk: imx: Include clk-provider.h instead of clk.h for i.MX8M SoCs clock driver

The i.MX8M SoCs clock driver are provider, NOT consumer, so clk-provider.h
should be used instead of clk.h.

Signed-off

clk: imx: Include clk-provider.h instead of clk.h for i.MX8M SoCs clock driver

The i.MX8M SoCs clock driver are provider, NOT consumer, so clk-provider.h
should be used instead of clk.h.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

show more ...

clk: imx8mm: Add CLKO2 support

Add CLKO2 support, which is useful for debugging purposes.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by:

clk: imx8mm: Add CLKO2 support

Add CLKO2 support, which is useful for debugging purposes.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

show more ...

clk: imx8mm: Fix the CLKO1 source select list

The CLKO1 clock source select list is the following as per the i.MX8MM
Reference Manual (put in increasing order):

000 - 24M_REF_CLK
001 - SYSTEM_PLL1_

clk: imx8mm: Fix the CLKO1 source select list

The CLKO1 clock source select list is the following as per the i.MX8MM
Reference Manual (put in increasing order):

000 - 24M_REF_CLK
001 - SYSTEM_PLL1_CLK
010 - None
011 - SYSTEM_PLL1_DIV4
100 - AUDIO_PLL2_CLK
101 - SYSTEM_PLL2_DIV2
110 - VPU_PLL_CLK
111 - SYSTEM_PLL1_DIV10

Fix it accordingly.

Fixes: ba5625c3e272 ("clk: imx: Add clock driver support for imx8mm")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

show more ...