Revision tags: v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45, v6.1.44, v6.1.43, v6.1.42, v6.1.41, v6.1.40, v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35 |
|
#
077782e3 |
| 15-Jun-2023 |
Claudiu Beznea <claudiu.beznea@microchip.com> |
clk: at91: clk-utmi: add support for parent_hw
Add support for parent_hw in utmi clock drivers. With this parent-child relation is described with pointers rather than strings making registration a b
clk: at91: clk-utmi: add support for parent_hw
Add support for parent_hw in utmi clock drivers. With this parent-child relation is described with pointers rather than strings making registration a bit faster.
All the SoC based drivers that rely on clk-utmi were adapted to the new API change. The switch itself for SoCs will be done in subsequent patches.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Maxime Ripard <mripard@kernel.org> Link: https://lore.kernel.org/r/20230615093227.576102-8-claudiu.beznea@microchip.com
show more ...
|
Revision tags: v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22, v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70, v5.15.69, v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62, v5.15.61, v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55, v5.15.54, v5.15.53, v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48, v5.15.47, v5.15.46, v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.16, v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12 |
|
#
36971566 |
| 11-Oct-2021 |
Claudiu Beznea <claudiu.beznea@microchip.com> |
clk: at91: re-factor clocks suspend/resume
SAMA5D2 and SAMA7G5 have a special power saving mode (backup mode) where most of the SoC's components are powered off (including PMC). Resuming from this m
clk: at91: re-factor clocks suspend/resume
SAMA5D2 and SAMA7G5 have a special power saving mode (backup mode) where most of the SoC's components are powered off (including PMC). Resuming from this mode is done with the help of bootloader. Peripherals are not aware of the power saving mode thus most of them are disabling clocks in proper suspend API and re-enable them in resume API without taking into account the previously setup rate. Moreover some of the peripherals are acting as wakeup sources and are not disabling the clocks in this scenario, when suspending. Since backup mode cuts the power for peripherals, in resume part these clocks needs to be re-configured.
The initial PMC suspend/resume code was designed only for SAMA5D2's PMC (as it was the only one supporting backup mode). SAMA7G supports also backup mode and its PMC is different (few new functionalities, different registers offsets, different offsets in registers for each functionalities). To address both SAMA5D2 and SAMA7G5 PMC add .save_context()/.resume_context() support to each clocks driver and call this from PMC driver.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20211011112719.3951784-2-claudiu.beznea@microchip.com Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
show more ...
|
Revision tags: v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54 |
|
#
ef396df9 |
| 22-Jul-2020 |
Claudiu Beznea <claudiu.beznea@microchip.com> |
clk: at91: clk-utmi: add utmi support for sama7g5
Add UTMI support for SAMA7G5. SAMA7G5's UTMI control is done via XTALF register. Values written at bits 2..0 in this register correspond to the on b
clk: at91: clk-utmi: add utmi support for sama7g5
Add UTMI support for SAMA7G5. SAMA7G5's UTMI control is done via XTALF register. Values written at bits 2..0 in this register correspond to the on board crystal oscillator frequency.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-18-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
show more ...
|
Revision tags: v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4, v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7, v5.2.6, v5.2.5, v5.2.4, v5.2.3, v5.2.2, v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8, v5.1.7, v5.1.6 |
|
#
2874c5fd |
| 27-May-2019 |
Thomas Gleixner <tglx@linutronix.de> |
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify it under the terms of th
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 3029 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v5.1.5, v5.1.4, v5.1.3, v5.1.2, v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11, v5.0.10, v5.0.9, v5.0.8, v5.0.7, v5.0.6, v5.0.5, v5.0.4, v5.0.3, v4.19.29, v5.0.2, v4.19.28, v5.0.1, v4.19.27, v5.0, v4.19.26, v4.19.25, v4.19.24, v4.19.23, v4.19.22, v4.19.21, v4.19.20, v4.19.19, v4.19.18, v4.19.17, v4.19.16, v4.19.15, v4.19.14, v4.19.13, v4.19.12, v4.19.11, v4.19.10, v4.19.9, v4.19.8, v4.19.7, v4.19.6, v4.19.5, v4.19.4, v4.18.20, v4.19.3, v4.18.19, v4.19.2, v4.18.18, v4.18.17, v4.19.1, v4.19, v4.18.16, v4.18.15 |
|
#
62061d35 |
| 16-Oct-2018 |
Alexandre Belloni <alexandre.belloni@bootlin.com> |
clk: at91: move DT compatibility code to its own file
Move all the DT backward compatibility code to its own file so it can be deleted later.
Signed-off-by: Alexandre Belloni <alexandre.belloni@boo
clk: at91: move DT compatibility code to its own file
Move all the DT backward compatibility code to its own file so it can be deleted later.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
show more ...
|
#
b2e39dc0 |
| 16-Oct-2018 |
Alexandre Belloni <alexandre.belloni@bootlin.com> |
clk: at91: allow clock registration from C code
Remove static keyword to allow functions to be used from other units. Also move some struct and function declarations to pmc.h
Signed-off-by: Alexand
clk: at91: allow clock registration from C code
Remove static keyword to allow functions to be used from other units. Also move some struct and function declarations to pmc.h
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> [sboyd@kernel.org: Include pmc.h] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
show more ...
|
Revision tags: v4.18.14, v4.18.13, v4.18.12, v4.18.11, v4.18.10, v4.18.9, v4.18.7, v4.18.6, v4.18.5, v4.17.18, v4.18.4, v4.18.3, v4.17.17, v4.18.2, v4.17.16, v4.17.15, v4.18.1, v4.18, v4.17.14, v4.17.13, v4.17.12, v4.17.11, v4.17.10, v4.17.9, v4.17.8, v4.17.7, v4.17.6, v4.17.5, v4.17.4, v4.17.3, v4.17.2, v4.17.1, v4.17, v4.16, v4.15, v4.13.16, v4.14, v4.13.5 |
|
#
92041a9f |
| 06-Sep-2017 |
Ludovic Desroches <ludovic.desroches@microchip.com> |
clk: at91: utmi: set the mainck rate
By default, it is assumed that the UTMI clock is generated from a 12 MHz reference clock (MAINCK). If it's not the case, the FREQ field of the SFR_UTMICKTRIM has
clk: at91: utmi: set the mainck rate
By default, it is assumed that the UTMI clock is generated from a 12 MHz reference clock (MAINCK). If it's not the case, the FREQ field of the SFR_UTMICKTRIM has to be updated to generate the UTMI clock in the proper way.
The UTMI clock has a fixed rate of 480 MHz. In fact, there is no multiplier we can configure. The multiplier is managed internally, depending on the reference clock frequency, to achieve the target of 480 MHz.
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com> Acked-by: Ingo van Lil <inguin@gmx.de> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
show more ...
|
Revision tags: v4.13, v4.12, v4.10.17, v4.10.16, v4.10.15, v4.10.14, v4.10.13, v4.10.12, v4.10.11, v4.10.10, v4.10.9, v4.10.8, v4.10.7, v4.10.6, v4.10.5, v4.10.4, v4.10.3, v4.10.2, v4.10.1, v4.10, v4.9, openbmc-4.4-20161121-1, v4.4.33, v4.4.32, v4.4.31, v4.4.30, v4.4.29, v4.4.28, v4.4.27, v4.7.10, openbmc-4.4-20161021-1, v4.7.9, v4.4.26, v4.7.8, v4.4.25, v4.4.24, v4.7.7, v4.8, v4.4.23, v4.7.6, v4.7.5, v4.4.22, v4.4.21, v4.7.4, v4.7.3, v4.4.20, v4.7.2, v4.4.19, openbmc-4.4-20160819-1, v4.7.1, v4.4.18, v4.4.17, openbmc-4.4-20160804-1, v4.4.16, v4.7, openbmc-4.4-20160722-1, openbmc-20160722-1, openbmc-20160713-1, v4.4.15, v4.6.4, v4.6.3, v4.4.14, v4.6.2, v4.4.13, openbmc-20160606-1 |
|
#
f5644f10 |
| 01-Jun-2016 |
Stephen Boyd <stephen.boyd@linaro.org> |
clk: at91: Migrate to clk_hw based registration and OF APIs
Now that we have clk_hw based provider APIs to register clks, we can get rid of struct clk pointers in this driver, allowing us to move cl
clk: at91: Migrate to clk_hw based registration and OF APIs
Now that we have clk_hw based provider APIs to register clks, we can get rid of struct clk pointers in this driver, allowing us to move closer to a clear split of consumer and provider clk APIs.
Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Tested-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
show more ...
|
Revision tags: v4.6.1, v4.4.12, openbmc-20160521-1, v4.4.11, openbmc-20160518-1, v4.6, v4.4.10, openbmc-20160511-1, openbmc-20160505-1, v4.4.9, v4.4.8, v4.4.7, openbmc-20160329-2, openbmc-20160329-1, openbmc-20160321-1, v4.4.6, v4.5, v4.4.5, v4.4.4, v4.4.3, openbmc-20160222-1, v4.4.2, openbmc-20160212-1, openbmc-20160210-1, openbmc-20160202-2, openbmc-20160202-1, v4.4.1, openbmc-20160127-1, openbmc-20160120-1, v4.4, openbmc-20151217-1, openbmc-20151210-1, openbmc-20151202-1, openbmc-20151123-1, openbmc-20151118-1, openbmc-20151104-1, v4.3, openbmc-20151102-1, openbmc-20151028-1 |
|
#
99a81706 |
| 16-Sep-2015 |
Alexandre Belloni <alexandre.belloni@free-electrons.com> |
clk: at91: remove IRQ handling and use polling
The AT91 clock drivers make use of IRQs to avoid polling when waiting for some clocks to be enabled. Unfortunately, this leads to a crash when those IR
clk: at91: remove IRQ handling and use polling
The AT91 clock drivers make use of IRQs to avoid polling when waiting for some clocks to be enabled. Unfortunately, this leads to a crash when those IRQs are threaded (which happens when using preempt-rt) because they are registered before thread creation is possible.
Use polling on those clocks instead to avoid the problem.
Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
show more ...
|
Revision tags: v4.3-rc1, v4.2, v4.2-rc8, v4.2-rc7, v4.2-rc6, v4.2-rc5, v4.2-rc4, v4.2-rc3, v4.2-rc2, v4.2-rc1, v4.1, v4.1-rc8, v4.1-rc7, v4.1-rc6, v4.1-rc5, v4.1-rc4, v4.1-rc3, v4.1-rc2, v4.1-rc1, v4.0, v4.0-rc7, v4.0-rc6, v4.0-rc5, v4.0-rc4, v4.0-rc3, v4.0-rc2, v4.0-rc1, v3.19, v3.19-rc7, v3.19-rc6, v3.19-rc5, v3.19-rc4, v3.19-rc3, v3.19-rc2, v3.19-rc1, v3.18, v3.18-rc7, v3.18-rc6, v3.18-rc5, v3.18-rc4, v3.18-rc3, v3.18-rc2, v3.18-rc1, v3.17, v3.17-rc7, v3.17-rc6, v3.17-rc5, v3.17-rc4 |
|
#
1bdf0232 |
| 07-Sep-2014 |
Boris Brezillon <boris.brezillon@free-electrons.com> |
clk: at91: make use of syscon/regmap internally
Use the regmap coming from syscon to access the registers instead of using pmc_read/pmc_write. This allows to avoid passing the at91_pmc structure to
clk: at91: make use of syscon/regmap internally
Use the regmap coming from syscon to access the registers instead of using pmc_read/pmc_write. This allows to avoid passing the at91_pmc structure to the child nodes of the PMC.
The final benefit is to have each clock register itself instead of having to iterate over the children.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
show more ...
|
#
de661d00 |
| 11-Sep-2015 |
Alexandre Belloni <alexandre.belloni@free-electrons.com> |
clk: at91: utmi: use pmc_read when the at91_pmc is available
at91_pmc_read is a workaround to allow external drivers to acces some registers of the PMC. There is no need for it in clk-utmi.c as we a
clk: at91: utmi: use pmc_read when the at91_pmc is available
at91_pmc_read is a workaround to allow external drivers to acces some registers of the PMC. There is no need for it in clk-utmi.c as we aready have a pointer to the struct at91_pmc.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
show more ...
|
#
c76a024e |
| 26-Jun-2015 |
David Dueck <davidcdueck@googlemail.com> |
clk: at91: do not leak resources
Do not leak memory and free irqs in case of an error.
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: David Dueck <davidcdueck@googlem
clk: at91: do not leak resources
Do not leak memory and free irqs in case of an error.
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: David Dueck <davidcdueck@googlemail.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
show more ...
|
Revision tags: v3.17-rc3, v3.17-rc2, v3.17-rc1, v3.16, v3.16-rc7, v3.16-rc6, v3.16-rc5, v3.16-rc4, v3.16-rc3, v3.16-rc2, v3.16-rc1, v3.15, v3.15-rc8, v3.15-rc7, v3.15-rc6, v3.15-rc5, v3.15-rc4, v3.15-rc3, v3.15-rc2, v3.15-rc1, v3.14, v3.14-rc8, v3.14-rc7, v3.14-rc6, v3.14-rc5, v3.14-rc4, v3.14-rc3, v3.14-rc2, v3.14-rc1, v3.13, v3.13-rc8, v3.13-rc7, v3.13-rc6, v3.13-rc5, v3.13-rc4, v3.13-rc3, v3.13-rc2, v3.13-rc1, v3.12, v3.12-rc7, v3.12-rc6, v3.12-rc5 |
|
#
f090fb37 |
| 11-Oct-2013 |
Boris BREZILLON <b.brezillon@overkiz.com> |
clk: at91: add PMC utmi clock
This adds new at91 utmi clock implementation using common clk framework.
This clock is a pll with a fixed factor (x40). It is used as a source for usb clock.
Signed-o
clk: at91: add PMC utmi clock
This adds new at91 utmi clock implementation using common clk framework.
This clock is a pll with a fixed factor (x40). It is used as a source for usb clock.
Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
show more ...
|
Revision tags: v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54 |
|
#
ef396df9 |
| 22-Jul-2020 |
Claudiu Beznea <claudiu.beznea@microchip.com> |
clk: at91: clk-utmi: add utmi support for sama7g5 Add UTMI support for SAMA7G5. SAMA7G5's UTMI control is done via XTALF register. Values written at bits 2..0 in this register corres
clk: at91: clk-utmi: add utmi support for sama7g5 Add UTMI support for SAMA7G5. SAMA7G5's UTMI control is done via XTALF register. Values written at bits 2..0 in this register correspond to the on board crystal oscillator frequency. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-18-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
show more ...
|
Revision tags: v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4, v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7, v5.2.6, v5.2.5, v5.2.4, v5.2.3, v5.2.2, v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8, v5.1.7, v5.1.6 |
|
#
2874c5fd |
| 27-May-2019 |
Thomas Gleixner <tglx@linutronix.de> |
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152 Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it u
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152 Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v5.1.5, v5.1.4, v5.1.3, v5.1.2, v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11, v5.0.10, v5.0.9, v5.0.8, v5.0.7, v5.0.6, v5.0.5, v5.0.4, v5.0.3, v4.19.29, v5.0.2, v4.19.28, v5.0.1, v4.19.27, v5.0, v4.19.26, v4.19.25, v4.19.24, v4.19.23, v4.19.22, v4.19.21, v4.19.20, v4.19.19, v4.19.18, v4.19.17, v4.19.16, v4.19.15, v4.19.14, v4.19.13, v4.19.12, v4.19.11, v4.19.10, v4.19.9, v4.19.8, v4.19.7, v4.19.6, v4.19.5, v4.19.4, v4.18.20, v4.19.3, v4.18.19, v4.19.2, v4.18.18, v4.18.17, v4.19.1, v4.19, v4.18.16, v4.18.15 |
|
#
62061d35 |
| 16-Oct-2018 |
Alexandre Belloni <alexandre.belloni@bootlin.com> |
clk: at91: move DT compatibility code to its own file Move all the DT backward compatibility code to its own file so it can be deleted later. Signed-off-by: Alexandre Belloni <a
clk: at91: move DT compatibility code to its own file Move all the DT backward compatibility code to its own file so it can be deleted later. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
show more ...
|
#
b2e39dc0 |
| 16-Oct-2018 |
Alexandre Belloni <alexandre.belloni@bootlin.com> |
clk: at91: allow clock registration from C code Remove static keyword to allow functions to be used from other units. Also move some struct and function declarations to pmc.h Si
clk: at91: allow clock registration from C code Remove static keyword to allow functions to be used from other units. Also move some struct and function declarations to pmc.h Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> [sboyd@kernel.org: Include pmc.h] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
show more ...
|
Revision tags: v4.18.14, v4.18.13, v4.18.12, v4.18.11, v4.18.10, v4.18.9, v4.18.7, v4.18.6, v4.18.5, v4.17.18, v4.18.4, v4.18.3, v4.17.17, v4.18.2, v4.17.16, v4.17.15, v4.18.1, v4.18, v4.17.14, v4.17.13, v4.17.12, v4.17.11, v4.17.10, v4.17.9, v4.17.8, v4.17.7, v4.17.6, v4.17.5, v4.17.4, v4.17.3, v4.17.2, v4.17.1, v4.17, v4.16, v4.15, v4.13.16, v4.14, v4.13.5 |
|
#
92041a9f |
| 06-Sep-2017 |
Ludovic Desroches <ludovic.desroches@microchip.com> |
clk: at91: utmi: set the mainck rate By default, it is assumed that the UTMI clock is generated from a 12 MHz reference clock (MAINCK). If it's not the case, the FREQ field of the SF
clk: at91: utmi: set the mainck rate By default, it is assumed that the UTMI clock is generated from a 12 MHz reference clock (MAINCK). If it's not the case, the FREQ field of the SFR_UTMICKTRIM has to be updated to generate the UTMI clock in the proper way. The UTMI clock has a fixed rate of 480 MHz. In fact, there is no multiplier we can configure. The multiplier is managed internally, depending on the reference clock frequency, to achieve the target of 480 MHz. Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com> Acked-by: Ingo van Lil <inguin@gmx.de> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
show more ...
|
Revision tags: v4.13, v4.12, v4.10.17, v4.10.16, v4.10.15, v4.10.14, v4.10.13, v4.10.12, v4.10.11, v4.10.10, v4.10.9, v4.10.8, v4.10.7, v4.10.6, v4.10.5, v4.10.4, v4.10.3, v4.10.2, v4.10.1, v4.10, v4.9, openbmc-4.4-20161121-1, v4.4.33, v4.4.32, v4.4.31, v4.4.30, v4.4.29, v4.4.28, v4.4.27, v4.7.10, openbmc-4.4-20161021-1, v4.7.9, v4.4.26, v4.7.8, v4.4.25, v4.4.24, v4.7.7, v4.8, v4.4.23, v4.7.6, v4.7.5, v4.4.22, v4.4.21, v4.7.4, v4.7.3, v4.4.20, v4.7.2, v4.4.19, openbmc-4.4-20160819-1, v4.7.1, v4.4.18, v4.4.17, openbmc-4.4-20160804-1, v4.4.16, v4.7, openbmc-4.4-20160722-1, openbmc-20160722-1, openbmc-20160713-1, v4.4.15, v4.6.4, v4.6.3, v4.4.14, v4.6.2, v4.4.13, openbmc-20160606-1 |
|
#
f5644f10 |
| 01-Jun-2016 |
Stephen Boyd <stephen.boyd@linaro.org> |
clk: at91: Migrate to clk_hw based registration and OF APIs Now that we have clk_hw based provider APIs to register clks, we can get rid of struct clk pointers in this driver, allowing u
clk: at91: Migrate to clk_hw based registration and OF APIs Now that we have clk_hw based provider APIs to register clks, we can get rid of struct clk pointers in this driver, allowing us to move closer to a clear split of consumer and provider clk APIs. Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Tested-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
show more ...
|
Revision tags: v4.6.1, v4.4.12, openbmc-20160521-1, v4.4.11, openbmc-20160518-1, v4.6, v4.4.10, openbmc-20160511-1, openbmc-20160505-1, v4.4.9, v4.4.8, v4.4.7, openbmc-20160329-2, openbmc-20160329-1, openbmc-20160321-1, v4.4.6, v4.5, v4.4.5, v4.4.4, v4.4.3, openbmc-20160222-1, v4.4.2, openbmc-20160212-1, openbmc-20160210-1, openbmc-20160202-2, openbmc-20160202-1, v4.4.1, openbmc-20160127-1, openbmc-20160120-1, v4.4, openbmc-20151217-1, openbmc-20151210-1, openbmc-20151202-1, openbmc-20151123-1, openbmc-20151118-1, openbmc-20151104-1, v4.3, openbmc-20151102-1, openbmc-20151028-1 |
|
#
99a81706 |
| 16-Sep-2015 |
Alexandre Belloni <alexandre.belloni@free-electrons.com> |
clk: at91: remove IRQ handling and use polling The AT91 clock drivers make use of IRQs to avoid polling when waiting for some clocks to be enabled. Unfortunately, this leads to a crash w
clk: at91: remove IRQ handling and use polling The AT91 clock drivers make use of IRQs to avoid polling when waiting for some clocks to be enabled. Unfortunately, this leads to a crash when those IRQs are threaded (which happens when using preempt-rt) because they are registered before thread creation is possible. Use polling on those clocks instead to avoid the problem. Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
show more ...
|
Revision tags: v4.3-rc1, v4.2, v4.2-rc8, v4.2-rc7, v4.2-rc6, v4.2-rc5, v4.2-rc4, v4.2-rc3, v4.2-rc2, v4.2-rc1, v4.1, v4.1-rc8, v4.1-rc7, v4.1-rc6, v4.1-rc5, v4.1-rc4, v4.1-rc3, v4.1-rc2, v4.1-rc1, v4.0, v4.0-rc7, v4.0-rc6, v4.0-rc5, v4.0-rc4, v4.0-rc3, v4.0-rc2, v4.0-rc1, v3.19, v3.19-rc7, v3.19-rc6, v3.19-rc5, v3.19-rc4, v3.19-rc3, v3.19-rc2, v3.19-rc1, v3.18, v3.18-rc7, v3.18-rc6, v3.18-rc5, v3.18-rc4, v3.18-rc3, v3.18-rc2, v3.18-rc1, v3.17, v3.17-rc7, v3.17-rc6, v3.17-rc5, v3.17-rc4 |
|
#
1bdf0232 |
| 07-Sep-2014 |
Boris Brezillon <boris.brezillon@free-electrons.com> |
clk: at91: make use of syscon/regmap internally Use the regmap coming from syscon to access the registers instead of using pmc_read/pmc_write. This allows to avoid passing the at91_pmc s
clk: at91: make use of syscon/regmap internally Use the regmap coming from syscon to access the registers instead of using pmc_read/pmc_write. This allows to avoid passing the at91_pmc structure to the child nodes of the PMC. The final benefit is to have each clock register itself instead of having to iterate over the children. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
show more ...
|
#
de661d00 |
| 11-Sep-2015 |
Alexandre Belloni <alexandre.belloni@free-electrons.com> |
clk: at91: utmi: use pmc_read when the at91_pmc is available at91_pmc_read is a workaround to allow external drivers to acces some registers of the PMC. There is no need for it in clk-ut
clk: at91: utmi: use pmc_read when the at91_pmc is available at91_pmc_read is a workaround to allow external drivers to acces some registers of the PMC. There is no need for it in clk-utmi.c as we aready have a pointer to the struct at91_pmc. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
show more ...
|
#
c76a024e |
| 26-Jun-2015 |
David Dueck <davidcdueck@googlemail.com> |
clk: at91: do not leak resources Do not leak memory and free irqs in case of an error. Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: David Dueck
clk: at91: do not leak resources Do not leak memory and free irqs in case of an error. Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: David Dueck <davidcdueck@googlemail.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
show more ...
|
Revision tags: v3.17-rc3, v3.17-rc2, v3.17-rc1, v3.16, v3.16-rc7, v3.16-rc6, v3.16-rc5, v3.16-rc4, v3.16-rc3, v3.16-rc2, v3.16-rc1, v3.15, v3.15-rc8, v3.15-rc7, v3.15-rc6, v3.15-rc5, v3.15-rc4, v3.15-rc3, v3.15-rc2, v3.15-rc1, v3.14, v3.14-rc8, v3.14-rc7, v3.14-rc6, v3.14-rc5, v3.14-rc4, v3.14-rc3, v3.14-rc2, v3.14-rc1, v3.13, v3.13-rc8, v3.13-rc7, v3.13-rc6, v3.13-rc5, v3.13-rc4, v3.13-rc3, v3.13-rc2, v3.13-rc1, v3.12, v3.12-rc7, v3.12-rc6, v3.12-rc5 |
|
#
f090fb37 |
| 11-Oct-2013 |
Boris BREZILLON <b.brezillon@overkiz.com> |
clk: at91: add PMC utmi clock This adds new at91 utmi clock implementation using common clk framework. This clock is a pll with a fixed factor (x40). It is used as a source for
clk: at91: add PMC utmi clock This adds new at91 utmi clock implementation using common clk framework. This clock is a pll with a fixed factor (x40). It is used as a source for usb clock. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
show more ...
|