clk: at91: re-factor clocks suspend/resume

SAMA5D2 and SAMA7G5 have a special power saving mode (backup mode) where
most of the SoC's components are powered off (including PMC). Resuming
from this m

clk: at91: re-factor clocks suspend/resume

SAMA5D2 and SAMA7G5 have a special power saving mode (backup mode) where
most of the SoC's components are powered off (including PMC). Resuming
from this mode is done with the help of bootloader. Peripherals are not
aware of the power saving mode thus most of them are disabling clocks in
proper suspend API and re-enable them in resume API without taking into
account the previously setup rate. Moreover some of the peripherals are
acting as wakeup sources and are not disabling the clocks in this
scenario, when suspending. Since backup mode cuts the power for
peripherals, in resume part these clocks needs to be re-configured.

The initial PMC suspend/resume code was designed only for SAMA5D2's PMC
(as it was the only one supporting backup mode). SAMA7G supports also
backup mode and its PMC is different (few new functionalities, different
registers offsets, different offsets in registers for each
functionalities). To address both SAMA5D2 and SAMA7G5 PMC add
.save_context()/.resume_context() support to each clocks driver and call
this from PMC driver.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20211011112719.3951784-2-claudiu.beznea@microchip.com
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

show more ...

clk: at91: usb: introduce num_parents in driver's structure

SAM9X60 USB clock may have up to 3 parents. Save the number of parents in
driver's data structure and validate against it when setting par

clk: at91: usb: introduce num_parents in driver's structure

SAM9X60 USB clock may have up to 3 parents. Save the number of parents in
driver's data structure and validate against it when setting parent.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lkml.kernel.org/r/1579261009-4573-5-git-send-email-claudiu.beznea@microchip.com
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

show more ...

clk: at91: usb: use proper usbs_mask

Use usbs_mask passed as argument. The usbs_mask is different for
SAM9X60.

Fixes: 2423eeaead6f8 ("clk: at91: usb: Add sam9x60 support")
Signed-off-by: Claudiu Be

clk: at91: usb: use proper usbs_mask

Use usbs_mask passed as argument. The usbs_mask is different for
SAM9X60.

Fixes: 2423eeaead6f8 ("clk: at91: usb: Add sam9x60 support")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lkml.kernel.org/r/1579261009-4573-4-git-send-email-claudiu.beznea@microchip.com
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

show more ...

clk: at91: usb: continue if clk_hw_round_rate() return zero

clk_hw_round_rate() may call round rate function of its parents. In case
of SAM9X60 two of USB parrents are PLLA and UPLL. These clocks ar

clk: at91: usb: continue if clk_hw_round_rate() return zero

clk_hw_round_rate() may call round rate function of its parents. In case
of SAM9X60 two of USB parrents are PLLA and UPLL. These clocks are
controlled by clk-sam9x60-pll.c driver. The round rate function for this
driver is sam9x60_pll_round_rate() which call in turn
sam9x60_pll_get_best_div_mul(). In case the requested rate is not in the
proper range (rate < characteristics->output[0].min &&
rate > characteristics->output[0].max) the sam9x60_pll_round_rate() will
return a negative number to its caller (called by
clk_core_round_rate_nolock()). clk_hw_round_rate() will return zero in
case a negative number is returned by clk_core_round_rate_nolock(). With
this, the USB clock will continue its rate computation even caller of
clk_hw_round_rate() returned an error. With this, the USB clock on SAM9X60
may not chose the best parent. I detected this after a suspend/resume
cycle on SAM9X60.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lkml.kernel.org/r/1579261009-4573-2-git-send-email-claudiu.beznea@microchip.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

show more ...

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of th

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 3029 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

clk: at91: usb: Add sam9x60 support

The sam9x60 USB clock supports four different parents, ensure they can be
selected.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-b

clk: at91: usb: Add sam9x60 support

The sam9x60 USB clock supports four different parents, ensure they can be
selected.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

show more ...

clk: at91: move DT compatibility code to its own file

Move all the DT backward compatibility code to its own file so it can be
deleted later.

Signed-off-by: Alexandre Belloni <alexandre.belloni@boo

clk: at91: move DT compatibility code to its own file

Move all the DT backward compatibility code to its own file so it can be
deleted later.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

show more ...

clk: at91: allow clock registration from C code

Remove static keyword to allow functions to be used from other units. Also
move some struct and function declarations to pmc.h

Signed-off-by: Alexand

clk: at91: allow clock registration from C code

Remove static keyword to allow functions to be used from other units. Also
move some struct and function declarations to pmc.h

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
[sboyd@kernel.org: Include pmc.h]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

show more ...

clk: at91: Migrate to clk_hw based registration and OF APIs

Now that we have clk_hw based provider APIs to register clks, we
can get rid of struct clk pointers in this driver, allowing us to
move cl

clk: at91: Migrate to clk_hw based registration and OF APIs

Now that we have clk_hw based provider APIs to register clks, we
can get rid of struct clk pointers in this driver, allowing us to
move closer to a clear split of consumer and provider clk APIs.

Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Tested-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

show more ...

clk: at91: Remove impossible checks for of_clk_get_parent_count()

These checks for < 0 are impossible now that
of_clk_get_parent_count() returns an unsigned int. Change the
checks for == 0 and updat

clk: at91: Remove impossible checks for of_clk_get_parent_count()

These checks for < 0 are impossible now that
of_clk_get_parent_count() returns an unsigned int. Change the
checks for == 0 and update the type.

Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

show more ...

clk: at91: remove useless includes

Over time, some includes were copy pasted from other clocks drivers but are
not necessary.

Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Alexandre

clk: at91: remove useless includes

Over time, some includes were copy pasted from other clocks drivers but are
not necessary.

Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>

show more ...

clk: at91: make use of syscon/regmap internally

Use the regmap coming from syscon to access the registers instead of using
pmc_read/pmc_write. This allows to avoid passing the at91_pmc structure to

clk: at91: make use of syscon/regmap internally

Use the regmap coming from syscon to access the registers instead of using
pmc_read/pmc_write. This allows to avoid passing the at91_pmc structure to
the child nodes of the PMC.

The final benefit is to have each clock register itself instead of having
to iterate over the children.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>

show more ...

clk: at91: Convert to clk_hw based provider APIs

We're removing struct clk from the clk provider API, so switch
this code to using the clk_hw based provider APIs.

Acked-by: Boris Brezillon <boris.b

clk: at91: Convert to clk_hw based provider APIs

We're removing struct clk from the clk provider API, so switch
this code to using the clk_hw based provider APIs.

Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

show more ...

clk: Replace __clk_get_num_parents with clk_hw_get_num_parents()

Mostly converted with the following semantic patch:

@@
struct clk_hw *E;
@@

-__clk_get_num_parents(E->clk)
+clk_hw_get_num_parents(

clk: Replace __clk_get_num_parents with clk_hw_get_num_parents()

Mostly converted with the following semantic patch:

@@
struct clk_hw *E;
@@

-__clk_get_num_parents(E->clk)
+clk_hw_get_num_parents(E)

Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: Chao Xie <chao.xie@marvell.com>
Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: "Emilio López" <emilio@elopez.com.ar>
Acked-by: Tero Kristo <t-kristo@ti.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

show more ...

clk: at91: make use of of_clk_parent_fill helper function

Use of_clk_parent_fill to fill in the parent clock names' array.

Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Boris Brez

clk: at91: make use of of_clk_parent_fill helper function

Use of_clk_parent_fill to fill in the parent clock names' array.

Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

show more ...

clk: change clk_ops' ->determine_rate() prototype

Clock rates are stored in an unsigned long field, but ->determine_rate()
(which returns a rounded rate from a requested one) returns a long
value (e

clk: change clk_ops' ->determine_rate() prototype

Clock rates are stored in an unsigned long field, but ->determine_rate()
(which returns a rounded rate from a requested one) returns a long
value (errors are reported using negative error codes), which can lead
to long overflow if the clock rate exceed 2Ghz.

Change ->determine_rate() prototype to return 0 or an error code, and pass
a pointer to a clk_rate_request structure containing the expected target
rate and the rate constraints imposed by clk users.

The clk_rate_request structure might be extended in the future to contain
other kind of constraints like the rounding policy, the maximum clock
inaccuracy or other things that are not yet supported by the CCF
(power consumption constraints ?).

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
CC: Jonathan Corbet <corbet@lwn.net>
CC: Tony Lindgren <tony@atomide.com>
CC: Ralf Baechle <ralf@linux-mips.org>
CC: "Emilio López" <emilio@elopez.com.ar>
CC: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Tero Kristo <t-kristo@ti.com>
CC: Peter De Schrijver <pdeschrijver@nvidia.com>
CC: Prashant Gaikwad <pgaikwad@nvidia.com>
CC: Stephen Warren <swarren@wwwdotorg.org>
CC: Thierry Reding <thierry.reding@gmail.com>
CC: Alexandre Courbot <gnurou@gmail.com>
CC: linux-doc@vger.kernel.org
CC: linux-kernel@vger.kernel.org
CC: linux-arm-kernel@lists.infradead.org
CC: linux-omap@vger.kernel.org
CC: linux-mips@linux-mips.org
CC: linux-tegra@vger.kernel.org
[sboyd@codeaurora.org: Fix parent dereference problem in
__clk_determine_rate()]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Tested-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
[sboyd@codeaurora.org: Folded in fix from Heiko for fixed-rate
clocks without parents or a rate determining op]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

show more ...

clk: at91: Use of_clk_get_parent_count() instead of open coding

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-

clk: at91: Use of_clk_get_parent_count() instead of open coding

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

show more ...

clk: at91: usb: propagate rate modification to the parent clk

The at91sam9n12 and at91sam9x5 usb clocks do not propagate rate
modification requests to their parents.
This causes a bug when the PLLB

clk: at91: usb: propagate rate modification to the parent clk

The at91sam9n12 and at91sam9x5 usb clocks do not propagate rate
modification requests to their parents.
This causes a bug when the PLLB is left uninitialized by the bootloader
(PLL multiplier set to 0, or in other words, PLL rate = 0 Hz).

Implement the determinate_rate method and propagate the change rate
request to the parent clk.

Cc: <stable@vger.kernel.org> # v3.14+
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Reported-by: Bo Shen <voice.shen@atmel.com>
Tested-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Michael Turquette <mturquette@linaro.org>

show more ...

clk: at91: usb: fix at91sam9x5 recalc, round and set rate

First check for rate == 0 in set_rate and round_rate to avoid div by zero.
Then, in order to get the closest rate, round all divisions to th

clk: at91: usb: fix at91sam9x5 recalc, round and set rate

First check for rate == 0 in set_rate and round_rate to avoid div by zero.
Then, in order to get the closest rate, round all divisions to the closest
result instead of rounding them down.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Michael Turquette <mturquette@linaro.org>

show more ...

clk: at91: usb: fix at91rm9200 round and set rate

at91rm9200_clk_usb_set_rate might fail depending on the requested rate,
because the parent_rate / rate remainder is not necessarily zero.
Moreover,

clk: at91: usb: fix at91rm9200 round and set rate

at91rm9200_clk_usb_set_rate might fail depending on the requested rate,
because the parent_rate / rate remainder is not necessarily zero.
Moreover, when rounding down the calculated rate we might alter the
divisor calculation and end up with an invalid divisor.

To solve those problems, accept a non zero remainder, and always round
division to the closest result.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Reported-by: Andreas Henriksson <andreas.henriksson@endian.se>
Tested-by: Andreas Henriksson <andreas.henriksson@endian.se>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Michael Turquette <mturquette@linaro.org>

show more ...

clk: at91: fix div by zero in USB clock driver

Test rate value before calculating the div value to avoid div by zero.

Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
Reported-by

clk: at91: fix div by zero in USB clock driver

Test rate value before calculating the div value to avoid div by zero.

Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
Reported-by: Gaël PORTAY <gael.portay@gmail.com>
Tested-by: Gaël PORTAY <gael.portay@gmail.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>

show more ...

clk: at91: rework rm9200 USB clock to propagate set_rate to the parent clk

The RM9200 USB clock is actually connected to a single parent (the PLLB)
on which we can apply a specific divider.
The USB

clk: at91: rework rm9200 USB clock to propagate set_rate to the parent clk

The RM9200 USB clock is actually connected to a single parent (the PLLB)
on which we can apply a specific divider.
The USB clock divider does not allow for fine grained control on the USB
clock frequency, hence propagating the set_rate request to the parent is
the only choice we have to properly configure the USB clock rate.

Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
Reported-by: Gaël PORTAY <gael.portay@gmail.com>
Tested-by: Gaël PORTAY <gael.portay@gmail.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>

show more ...

clk: at91: add PMC usb clock

This patch adds new at91 usb clock implementation using common clk framework.
This clock is used to clock usb ports (ohci, ehci and udc).

Signed-off-by: Boris BREZILLON

clk: at91: add PMC usb clock

This patch adds new at91 usb clock implementation using common clk framework.
This clock is used to clock usb ports (ohci, ehci and udc).

Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

show more ...

clk: at91: usb: introduce num_parents in driver's structure

SAM9X60 USB clock may have up to 3 parents. Save the number of parents in
driver's data structure and validate against it when

clk: at91: usb: introduce num_parents in driver's structure

SAM9X60 USB clock may have up to 3 parents. Save the number of parents in
driver's data structure and validate against it when setting parent.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lkml.kernel.org/r/1579261009-4573-5-git-send-email-claudiu.beznea@microchip.com
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

show more ...

clk: at91: usb: use proper usbs_mask

Use usbs_mask passed as argument. The usbs_mask is different for
SAM9X60.

Fixes: 2423eeaead6f8 ("clk: at91: usb: Add sam9x60 support")
S

clk: at91: usb: use proper usbs_mask

Use usbs_mask passed as argument. The usbs_mask is different for
SAM9X60.

Fixes: 2423eeaead6f8 ("clk: at91: usb: Add sam9x60 support")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lkml.kernel.org/r/1579261009-4573-4-git-send-email-claudiu.beznea@microchip.com
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

show more ...