Bluetooth: hci_h4: Fix padding calculation error within h4_recv_buf()

it is erroneous to calculate padding by subtracting length of type
indication from skb->len, it will cause data analysis error f

Bluetooth: hci_h4: Fix padding calculation error within h4_recv_buf()

it is erroneous to calculate padding by subtracting length of type
indication from skb->len, it will cause data analysis error for
alignment which is greater than 1, so fixed by adding length of type
indication with skb->len.

Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

show more ...

Bluetooth: hci_h4: Remove a redundant assignment in 'h4_flush()'

'hu->priv' is set twice to NULL in this function.
Axe one of these assignments.

Signed-off-by: Christophe JAILLET <christophe.jaille

Bluetooth: hci_h4: Remove a redundant assignment in 'h4_flush()'

'hu->priv' is set twice to NULL in this function.
Axe one of these assignments.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

show more ...

Bluetooth: hci_h4: Fix a typo in a comment

'transmittion' should be 'transmission'

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Marcel Holtmann <marcel@holtmann.

Bluetooth: hci_h4: Fix a typo in a comment

'transmittion' should be 'transmission'

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

show more ...

Bluetooth: hci_h4: Add support for ISO packets

This enables H4 driver to properly handle ISO packets.

Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann

Bluetooth: hci_h4: Add support for ISO packets

This enables H4 driver to properly handle ISO packets.

Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

show more ...

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of th

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details you
should have received a copy of the gnu general public license along
with this program if not write to the free software foundation inc
59 temple place suite 330 boston ma 02111 1307 usa

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 1334 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

Bluetooth: hci_uart: Check if socket buffer is ERR_PTR in h4_recv_buf()

h4_recv_buf() callers store the return value to socket buffer and
recursively pass the buffer to h4_recv_buf() without protect

Bluetooth: hci_uart: Check if socket buffer is ERR_PTR in h4_recv_buf()

h4_recv_buf() callers store the return value to socket buffer and
recursively pass the buffer to h4_recv_buf() without protection. So,
ERR_PTR returned from h4_recv_buf() can be dereferenced, if called again
before setting the socket buffer to NULL from previous error. Check if
skb is ERR_PTR in h4_recv_buf().

Reported-by: syzbot+017a32f149406df32703@syzkaller.appspotmail.com
Signed-off-by: Myungho Jung <mhjungk@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

show more ...

Bluetooth: Use bt_dev_err and bt_dev_info when possible

In case of using BT_ERR and BT_INFO, convert to bt_dev_err and
bt_dev_info when possible. This allows for controller specific
reporting.

Sign

Bluetooth: Use bt_dev_err and bt_dev_info when possible

In case of using BT_ERR and BT_INFO, convert to bt_dev_err and
bt_dev_info when possible. This allows for controller specific
reporting.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>

show more ...

Bluetooth: hci_uart: Fix uninitialized alignment value

Force alignment value to the default one (1 byte) if uninitialized.
This fixes hci_ll serdev driver (alignment = 0) and avoid any further
issue

Bluetooth: hci_uart: Fix uninitialized alignment value

Force alignment value to the default one (1 byte) if uninitialized.
This fixes hci_ll serdev driver (alignment = 0) and avoid any further
issues with upcoming drivers.

Signed-off-by: Loic Poulain <loic.poulain@gmail.com>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>

show more ...

networking: introduce and use skb_put_data()

A common pattern with skb_put() is to just want to memcpy()
some data into the new space, introduce skb_put_data() for
this.

An spatch similar to the on

networking: introduce and use skb_put_data()

A common pattern with skb_put() is to just want to memcpy()
some data into the new space, introduce skb_put_data() for
this.

An spatch similar to the one for skb_put_zero() converts many
of the places using it:

@@
identifier p, p2;
expression len, skb, data;
type t, t2;
@@
(
-p = skb_put(skb, len);
+p = skb_put_data(skb, data, len);
|
-p = (t)skb_put(skb, len);
+p = skb_put_data(skb, data, len);
)
(
p2 = (t2)p;
-memcpy(p2, data, len);
|
-memcpy(p, data, len);
)

@@
type t, t2;
identifier p, p2;
expression skb, data;
@@
t *p;
...
(
-p = skb_put(skb, sizeof(t));
+p = skb_put_data(skb, data, sizeof(t));
|
-p = (t *)skb_put(skb, sizeof(t));
+p = skb_put_data(skb, data, sizeof(t));
)
(
p2 = (t2)p;
-memcpy(p2, data, sizeof(*p));
|
-memcpy(p, data, sizeof(*p));
)

@@
expression skb, len, data;
@@
-memcpy(skb_put(skb, len), data, len);
+skb_put_data(skb, data, len);

(again, manually post-processed to retain some comments)

Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

Bluetooth: hci_uart: add support for word alignment

This will be used by Nokia's H4+ protocol, which
uses 2-byte aligned packets.

Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sebastian Reic

Bluetooth: hci_uart: add support for word alignment

This will be used by Nokia's H4+ protocol, which
uses 2-byte aligned packets.

Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

show more ...

Bluetooth: Use new hci_skb_pkt_* wrappers for drivers

The new hci_skb_pkt_* wrappers are mainly intented for drivers to
require less knowledge about bt_cb(sbk) handling. So after converting
the core

Bluetooth: Use new hci_skb_pkt_* wrappers for drivers

The new hci_skb_pkt_* wrappers are mainly intented for drivers to
require less knowledge about bt_cb(sbk) handling. So after converting
the core packet handling, convert all drivers.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>

show more ...

Bluetooth: bpa10x: Use h4_recv_buf helper for frame reassembly

The manually coded frame reassembly is actually broken. The h4_recv_buf
helper from the UART driver is a perfect fit for frame reassemb

Bluetooth: bpa10x: Use h4_recv_buf helper for frame reassembly

The manually coded frame reassembly is actually broken. The h4_recv_buf
helper from the UART driver is a perfect fit for frame reassembly for
this driver. So just export that function and use it here as well.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>

show more ...

Bluetooth: hci_uart: Fix zero len data packet reception issue

Packets with a variable length value equal to zero were not received.

Since no more data expected (and input buffer entirely consumed),

Bluetooth: hci_uart: Fix zero len data packet reception issue

Packets with a variable length value equal to zero were not received.

Since no more data expected (and input buffer entirely consumed), we
need to complete/forward the packet immediately instead of waiting for
more data.

Signed-off-by: Loic Poulain <loic.poulain@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

show more ...

Bluetooth: hci_uart: Fix dereferencing of ERR_PTR

If h4_recv_buf() return ERR_PTR instead sk_buff pointer, it should be
cleared once PTR_ERR is completed for the further dereference such as
h4_recv(

Bluetooth: hci_uart: Fix dereferencing of ERR_PTR

If h4_recv_buf() return ERR_PTR instead sk_buff pointer, it should be
cleared once PTR_ERR is completed for the further dereference such as
h4_recv(), or h4_close().

Signed-off-by: Chan-yeol Park <chanyeol.park@samsung.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

show more ...

Bluetooth: hci_uart: Provide generic H:4 receive framework

Future H:4 based UART drivers require custom packet types and custom
receive functions. To support this, extended the h4_recv_buf function

Bluetooth: hci_uart: Provide generic H:4 receive framework

Future H:4 based UART drivers require custom packet types and custom
receive functions. To support this, extended the h4_recv_buf function
with a packet definition table.

For the default H:4 packets types of ACL data, SCO data and events,
provide helpers to reduce the amount of code duplication.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>

show more ...

Bluetooth: hci_uart: Update version number driver

This version number is more cosmetic and for debugging purposes, but
since there has been a few changes lately, increase it now.

Two left-over and

Bluetooth: hci_uart: Update version number driver

This version number is more cosmetic and for debugging purposes, but
since there has been a few changes lately, increase it now.

Two left-over and not used version constants that were never exposed
anywhere are removed since they have no actual value.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>

show more ...

Bluetooth: hci_uart: Remove the manual protocol init message

The init function for each HCI UART protocol prints the same on success
and failure. This information is so generic, remove it and let th

Bluetooth: hci_uart: Remove the manual protocol init message

The init function for each HCI UART protocol prints the same on success
and failure. This information is so generic, remove it and let the main
HCI UART handling print it instead.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>

show more ...

Bluetooth: hci_uart: Add name information to hci_uart_proto struct

This adds an extra name field to the hci_uart_proto struct that provides
a simple way of adding a string identifier to the protocol

Bluetooth: hci_uart: Add name information to hci_uart_proto struct

This adds an extra name field to the hci_uart_proto struct that provides
a simple way of adding a string identifier to the protocol.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>

show more ...

Bluetooth: hci_uart: Make struct hci_uart_proto always const

The usage of struct hci_uart_proto should always be const. Change the
function headers and individual protocol drivers.

Signed-off-by: M

Bluetooth: hci_uart: Make struct hci_uart_proto always const

The usage of struct hci_uart_proto should always be const. Change the
function headers and individual protocol drivers.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>

show more ...

Bluetooth: hci_uart: Use h4_recv_buf helper for H:4 protocol

Instead of using hci_recv_stream_fragment, use the local available
h4_recv_buf helper function.

Signed-off-by: Marcel Holtmann <marcel@h

Bluetooth: hci_uart: Use h4_recv_buf helper for H:4 protocol

Instead of using hci_recv_stream_fragment, use the local available
h4_recv_buf helper function.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>

show more ...

Bluetooth: hci_uart: Introduce h4_recv_buf helper function

The h4_recv_buf helper function can be used for receiving H:4 packets
out of a TTY stream. It is self-contained and allows for reuse by all

Bluetooth: hci_uart: Introduce h4_recv_buf helper function

The h4_recv_buf helper function can be used for receiving H:4 packets
out of a TTY stream. It is self-contained and allows for reuse by all
HCI UART protocols.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>

show more ...

Bluetooth: hci_uart: Use const data pointer for received data

The TTY layer provides its data pointers as const, but the HCI UART
callbacks expect them as general data pointers. This is of course
wr

Bluetooth: hci_uart: Use const data pointer for received data

The TTY layer provides its data pointers as const, but the HCI UART
callbacks expect them as general data pointers. This is of course
wrong and instead of casting them, just fix the individual drivers
to actually take a const data pointer.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>

show more ...

Bluetooth: hci_uart: Remove unused h4->rx_state and h4->rx_count field

The fields h4->rx_state and h4->rx_count are not used at all and with
that they can be just removed.

Signed-off-by: Marcel Hol

Bluetooth: hci_uart: Remove unused h4->rx_state and h4->rx_count field

The fields h4->rx_state and h4->rx_count are not used at all and with
that they can be just removed.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>

show more ...

Bluetooth: hci_uart: Remove unused h4->rx_skb field

The h4->rx_skb is not used anymore and with that just remove it. Seems
this was a leftover and even the kfree_skb call freeing it is rather
pointl

Bluetooth: hci_uart: Remove unused h4->rx_skb field

The h4->rx_skb is not used anymore and with that just remove it. Seems
this was a leftover and even the kfree_skb call freeing it is rather
pointless since it got never allocated.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>

show more ...

Bluetooth: Remove hci_h4 unused defines

H4 states are not used anymore.

Signed-off-by: Loic Poulain <loic.poulain@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>