PM: runtime: add devm_pm_clk_create helper

A typical code pattern for pm_clk_create() call is to call it in the
_probe function and to call pm_clk_destroy() both from _probe error path
and from _rem

PM: runtime: add devm_pm_clk_create helper

A typical code pattern for pm_clk_create() call is to call it in the
_probe function and to call pm_clk_destroy() both from _probe error path
and from _remove function. For some drivers the whole remove function
would consist of the call to pm_remove_disable().

Add helper function to replace this bolierplate piece of code. Calling
devm_pm_clk_create() removes the need for calling pm_clk_destroy() both
in the probe()'s error path and in the remove() function.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210731195034.979084-3-dmitry.baryshkov@linaro.org
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

show more ...

PM: clk: remove kernel-doc warning

Remove make W=1 warning:

drivers/base/power/clock_ops.c:148: warning: expecting prototype for
pm_clk_enable(). Prototype was for __pm_clk_enable() instead

Signed

PM: clk: remove kernel-doc warning

Remove make W=1 warning:

drivers/base/power/clock_ops.c:148: warning: expecting prototype for
pm_clk_enable(). Prototype was for __pm_clk_enable() instead

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

show more ...

PM: clk: make PM clock layer compatible with clocks that must sleep

The clock API splits its interface into sleepable ant atomic contexts:

- clk_prepare/clk_unprepare for stuff that might sleep

PM: clk: make PM clock layer compatible with clocks that must sleep

The clock API splits its interface into sleepable ant atomic contexts:

- clk_prepare/clk_unprepare for stuff that might sleep

- clk_enable_clk_disable for anything that may be done in atomic context

The code handling runtime PM for clocks only calls clk_disable() on
suspend requests, and clk_enable on resume requests. This means that
runtime PM with clock providers that only have the prepare/unprepare
methods implemented is basically useless.

Many clock implementations can't accommodate atomic contexts. This is
often the case when communication with the clock happens through another
subsystem like I2C or SCMI.

Let's make the clock PM code useful with such clocks by safely invoking
clk_prepare/clk_unprepare upon resume/suspend requests. Of course, when
such clocks are registered with the PM layer then pm_runtime_irq_safe()
can't be used, and neither pm_runtime_suspend() nor pm_runtime_resume()
may be invoked in atomic context.

For clocks that do implement the enable and disable methods then
everything just works as before.

A note on sparse:
According to https://lwn.net/Articles/109066/ there are things
that sparse can't cope with. In particular, pm_clk_op_lock() and
pm_clk_op_unlock() may or may not lock/unlock psd->lock depending on
some runtime condition. To work around that we tell it the lock is
always untaken for the purpose of static analisys.

Thanks to Naresh Kamboju for reporting issues with the initial patch.

Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

show more ...

PM / clk: Remove error message on out-of-memory condition

There is no need to print an error message if kstrdup() fails, as the
memory allocation core already takes care of that.

Note that commit 5

PM / clk: Remove error message on out-of-memory condition

There is no need to print an error message if kstrdup() fails, as the
memory allocation core already takes care of that.

Note that commit 59d84ca8c46a93ad ("PM / OPP / clk: Remove unnecessary
OOM message") already removed similar error messages, but this one was
forgotten.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

show more ...

drivers: base: power: clock_ops: Use of_clk_get_parent_count()

Use of_clk_get_parent_count() instead of open coding.

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Kefeng

drivers: base: power: clock_ops: Use of_clk_get_parent_count()

Use of_clk_get_parent_count() instead of open coding.

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

show more ...

drivers: base: power: add proper SPDX identifiers on files that did not have them.

There were a few files in the driver core power code that did not have
SPDX identifiers on them, so fix that up. A

drivers: base: power: add proper SPDX identifiers on files that did not have them.

There were a few files in the driver core power code that did not have
SPDX identifiers on them, so fix that up. At the same time, remove the
"free form" text that specified the license of the file, as that is
impossible for any tool to properly parse.

Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

PM: clock_ops: fix missing clk_prepare() return value check

clk_prepare() can fail, so check its status and if it fails,
issue an error message and change the clock_entry_status to
PCE_STATUS_ERROR.

PM: clock_ops: fix missing clk_prepare() return value check

clk_prepare() can fail, so check its status and if it fails,
issue an error message and change the clock_entry_status to
PCE_STATUS_ERROR.

Signed-off-by: Aditya Pakki <pakki001@umn.edu>
[ rjw: Subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

show more ...

PM / clk: signedness bug in of_pm_clk_add_clks()

"count" needs to be signed for the error handling to work. I made "i"
signed as well so they match.

Fixes: 02113ba93ea4 (PM / clk: Add support for

PM / clk: signedness bug in of_pm_clk_add_clks()

"count" needs to be signed for the error handling to work. I made "i"
signed as well so they match.

Fixes: 02113ba93ea4 (PM / clk: Add support for obtaining clocks from device-tree)
Cc: 4.6+ <stable@vger.kernel.org> # 4.6+
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

show more ...

PM / clk: Add support for adding a specific clock from device-tree

Some drivers using the PM clocks framework need to add specific clocks
from device-tree using a name by calling the functions
of_cl

PM / clk: Add support for adding a specific clock from device-tree

Some drivers using the PM clocks framework need to add specific clocks
from device-tree using a name by calling the functions
of_clk_get_by_name() and then pm_clk_add_clk(). Rather than having
drivers call both functions, add a helper function of_pm_clk_add_clk()
that will call these functions so drivers can call a single function
to add a specific clock from device-tree.

Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

show more ...

PM / clk: export symbols for existing pm_clk_<...> API fcns

While trying to convert a DMA driver from bool to tristate, we
encountered the following:

ERROR: "pm_clk_add_clk" [drivers/dma/tegra210-a

PM / clk: export symbols for existing pm_clk_<...> API fcns

While trying to convert a DMA driver from bool to tristate, we
encountered the following:

ERROR: "pm_clk_add_clk" [drivers/dma/tegra210-adma.ko] undefined!
ERROR: "pm_clk_create" [drivers/dma/tegra210-adma.ko] undefined!
ERROR: "pm_clk_destroy" [drivers/dma/tegra210-adma.ko] undefined!
ERROR: "pm_clk_suspend" [drivers/dma/tegra210-adma.ko] undefined!
ERROR: "pm_clk_resume" [drivers/dma/tegra210-adma.ko] undefined!

Since in principle there is nothing preventing these functions
from being used in modular code as well as builtin, we add the
export of them. We expand the scope to also include:

pm_clk_add
of_pm_clk_add_clks
pm_clk_remove
pm_clk_remove_clk
pm_clk_init
pm_clk_runtime_suspend
pm_clk_runtime_resume
pm_clk_add_notifier

...since these functions are also non-static and presumably form
part of the existing API used by other drivers that may become
modular in the future.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

show more ...

PM / clk: ensure we don't allocate a -ve size of count clks

It is entirely possible for of_count_phandle_wit_args to
return a -ve error return value so we need to check for this
otherwise we end up

PM / clk: ensure we don't allocate a -ve size of count clks

It is entirely possible for of_count_phandle_wit_args to
return a -ve error return value so we need to check for this
otherwise we end up allocating a negative number of clk objects.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

show more ...

PM / clk: Add support for obtaining clocks from device-tree

The PM clocks framework requires clients to pass either a con-id or a
valid clk pointer in order to add a clock to a device. Add a new
fun

PM / clk: Add support for obtaining clocks from device-tree

The PM clocks framework requires clients to pass either a con-id or a
valid clk pointer in order to add a clock to a device. Add a new
function of_pm_clk_add_clks() to allows device clocks to be retrieved
from device-tree and populated for a given device. Note that it is
not necessary to make the compilation of this new function dependent
upon CONFIG_OF because there are stubs functions for the device-tree
APIs used.

In order to handle errors encountered when adding clocks from
device-tree, add a function pm_clk_remove_clk() to remove any clocks
(using a pointer to the clk structure) that have been added
successfully before the error occurred.

Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

show more ...

PM / Domains: add setter for dev.pm_domain

Adds a function that sets the pointer to dev_pm_domain in struct device
and that warns if the device has already finished probing. The reason
why we want t

PM / Domains: add setter for dev.pm_domain

Adds a function that sets the pointer to dev_pm_domain in struct device
and that warns if the device has already finished probing. The reason
why we want to enforce that is because in the general case that can
cause problems and also that we can simplify code quite a bit if we can
always assume that.

This patch also changes all current code that directly sets the
dev.pm_domain pointer.

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

show more ...

PM / clk: don't leave clocks enabled when driver not bound

There is a new notification BUS_NOTIFY_DRIVER_NOT_BOUND that is issued when
driver fails during binding. In such case pm_clk_notify(), when

PM / clk: don't leave clocks enabled when driver not bound

There is a new notification BUS_NOTIFY_DRIVER_NOT_BOUND that is issued when
driver fails during binding. In such case pm_clk_notify(), when PM_CLK=n,
leaves clocks enabled. Undo operations that have been done in
BUS_NOTIFY_BIND_DRIVER case.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

show more ...

PM / clk: Fix broken build due to non-matching code and header #ifdefs

If an architecture's main Kconfig file doesn't include
kernel/power/Kconfig, but CONFIG_PM=y and HAVE_CLK=y (e.g. m68knommu
all

PM / clk: Fix broken build due to non-matching code and header #ifdefs

If an architecture's main Kconfig file doesn't include
kernel/power/Kconfig, but CONFIG_PM=y and HAVE_CLK=y (e.g. m68knommu
allmodconfig):

drivers/base/power/clock_ops.c: In function ‘__pm_clk_add’:
drivers/base/power/clock_ops.c:106: error: ‘struct pm_subsys_data’ has no member named ‘clock_list’
drivers/base/power/clock_ops.c: At top level:
drivers/base/power/clock_ops.c:120: error: redefinition of ‘pm_clk_add’
include/linux/pm_clock.h:64: error: previous definition of ‘pm_clk_add’ was here
drivers/base/power/clock_ops.c:135: error: redefinition of ‘pm_clk_add_clk’
include/linux/pm_clock.h:69: error: previous definition of ‘pm_clk_add_clk’ was here
drivers/base/power/clock_ops.c:171: error: redefinition of ‘pm_clk_remove’
include/linux/pm_clock.h:73: error: previous definition of ‘pm_clk_remove’ was here
drivers/base/power/clock_ops.c: In function ‘pm_clk_remove’:
drivers/base/power/clock_ops.c:180: error: ‘struct pm_subsys_data’ has no member named ‘clock_list’
drivers/base/power/clock_ops.c:180: error: ‘struct pm_subsys_data’ has no member named ‘clock_list’
drivers/base/power/clock_ops.c: At top level:
drivers/base/power/clock_ops.c:207: error: redefinition of ‘pm_clk_init’
include/linux/pm_clock.h:54: error: previous definition of ‘pm_clk_init’ was here
drivers/base/power/clock_ops.c: In function ‘pm_clk_init’:
drivers/base/power/clock_ops.c:210: error: ‘struct pm_subsys_data’ has no member named ‘clock_list’
drivers/base/power/clock_ops.c: At top level:
drivers/base/power/clock_ops.c:221: error: redefinition of ‘pm_clk_create’
include/linux/pm_clock.h:57: error: previous definition of ‘pm_clk_create’ was here
drivers/base/power/clock_ops.c:234: error: redefinition of ‘pm_clk_destroy’
include/linux/pm_clock.h:61: error: previous definition of ‘pm_clk_destroy’ was here
drivers/base/power/clock_ops.c: In function ‘pm_clk_destroy’:
drivers/base/power/clock_ops.c:246: error: ‘struct pm_subsys_data’ has no member named ‘clock_list’
drivers/base/power/clock_ops.c:246: error: ‘struct pm_subsys_data’ has no member named ‘clock_list’
drivers/base/power/clock_ops.c: At top level:
drivers/base/power/clock_ops.c:263: error: expected identifier or ‘(’ before ‘void’
drivers/base/power/clock_ops.c:263: error: expected ‘)’ before numeric constant
drivers/base/power/clock_ops.c:293: error: expected identifier or ‘(’ before ‘void’
drivers/base/power/clock_ops.c:293: error: expected ‘)’ before numeric constant
drivers/base/power/clock_ops.c: In function ‘pm_clk_runtime_suspend’:
drivers/base/power/clock_ops.c:384: error: called object ‘0u’ is not a function
drivers/base/power/clock_ops.c: In function ‘pm_clk_runtime_resume’:
drivers/base/power/clock_ops.c:400: error: called object ‘0u’ is not a function

This happens because:
- drivers/base/power/clock_ops.c depends on CONFIG_HAVE_CLK,
- the failing code inside clock_ops.c additionally depends on
CONFIG_PM,
- the forward declarations and other definitions in <linux/pm_clock.h>
depend on CONFIG_PM_CLK,
- CONFIG_PM_CLK is defined as PM && HAVE_CLK in kernel/power/Kconfig,
but it is not included on all architectures.

Fix this by protecting the failing code inside clock_ops.c by
CONFIG_PM_CLK instead of CONFIG_PM, so it matches <linux/pm_clock.h>.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

show more ...

PM / clk: Do not __clk_get passed in clock-references

Clock references are on a per-user basis now, so they are not supposed
to be refcounted by itself anymore. Therefore multiple cascaded get and
p

PM / clk: Do not __clk_get passed in clock-references

Clock references are on a per-user basis now, so they are not supposed
to be refcounted by itself anymore. Therefore multiple cascaded get and
put calls will fail.

When a clock reference gets passed into pm_clk_add_clk we can assume
that the pm clock handling will take control of the clock reference,
so after this functions returns the caller should've given up control
of that handle.

So remove the additional call to __clk_get() in __pm_clk_add().

The only current user of pm_clk_add_clk is drivers/clk/shmobile/clk-mstp.c
which already follows this paradigm by only getting the clock but not
puting it after passing the reference into pm_clk_add_clk.

In the error case the caller is expected to clean up the clock, as it
may very well try to do something different if pm_clk_add_clk() fails.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
[add commit-message]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

show more ...

PM / clk: don't return int on __pm_clk_enable()

Static analysis by cppcheck found an issue that was recently introduced by
commit 471f7707b6f0b1 ("PM / clock_ops: make __pm_clk_enable more generic")

PM / clk: don't return int on __pm_clk_enable()

Static analysis by cppcheck found an issue that was recently introduced by
commit 471f7707b6f0b1 ("PM / clock_ops: make __pm_clk_enable more generic")
where a return status in ret was not being initialised and garbage
being returned when ce->status >= PCE_STATUS_ERROR.

The fact that ret is not being checked by the caller and that
ret is only used internally __pm_clk_enable() to check if clk_enable()
was OK means we can ignore returning it instead turn
__pm_clk_enable() into function with a void return.

Fixes: 471f7707b6f0b1 ("PM / clock_ops: make __pm_clk_enable more generic")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

show more ...

PM / clk: Print acquired clock name in addition to con_id

Currently the con_id of the acquired clock is printed for debugging
purposes. But in several cases, the con_id is NULL, which doesn't
provi

PM / clk: Print acquired clock name in addition to con_id

Currently the con_id of the acquired clock is printed for debugging
purposes. But in several cases, the con_id is NULL, which doesn't
provide much debugging information when printed. These cases are:
- When explicitly passing a NULL con_id (which means the first clock
tied to the device, if available),
- When not using pm_clk_add(), but pm_clk_add_clk() (which takes a
"struct clk *" directly).

Hence print the actual clock name in addition to (and not instead of;
thanks Grygorii Strashko!) the con_id.

Note that the clock name is not available with legacy clock frameworks,
and the hex pointer address will be printed instead.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Grygorii Strashko <grygorii.strashko@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

show more ...

PM / clk: Fix clock error check in __pm_clk_add()

In the final iteration of commit 245bd6f6af8a62a2 ("PM / clock_ops: Add
pm_clk_add_clk()"), a refcount increment was added by Grygorii Strashko.
How

PM / clk: Fix clock error check in __pm_clk_add()

In the final iteration of commit 245bd6f6af8a62a2 ("PM / clock_ops: Add
pm_clk_add_clk()"), a refcount increment was added by Grygorii Strashko.
However, the accompanying IS_ERR() check operates on the wrong clock
pointer, which is always zero at this point, i.e. not an error.
This may lead to a NULL pointer dereference later, when __clk_get()
tries to dereference an error pointer.

Check the passed clock pointer instead to fix this.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Fixes: 245bd6f6af8a62a2 ("PM / clock_ops: Add pm_clk_add_clk()")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

show more ...

PM / clock_ops: Provide default runtime ops to users

Most users of PM clocks do the extact same things in the runtime
suspend/resume callbacks. Provide them USE_PM_CLK_RUNTIME_OPS so
as to avoid/rem

PM / clock_ops: Provide default runtime ops to users

Most users of PM clocks do the extact same things in the runtime
suspend/resume callbacks. Provide them USE_PM_CLK_RUNTIME_OPS so
as to avoid/remove boilerplate code.

Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Kevin Hilman <khilman@linaro.org>
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

show more ...

PM / OPP / clk: Remove unnecessary OOM message

This patch reduces the kernel size by removing error messages that duplicate
the normal OOM message.

A simplified version of the semantic patch that f

PM / OPP / clk: Remove unnecessary OOM message

This patch reduces the kernel size by removing error messages that duplicate
the normal OOM message.

A simplified version of the semantic patch that finds this problem is as
follows: (http://coccinelle.lip6.fr)

@@
identifier f,print,l;
expression e;
constant char[] c;
@@

e = \(kzalloc\|kmalloc\|devm_kzalloc\|devm_kmalloc\)(...);
if (e == NULL) {
<+...
- print(...,c,...);
... when any
(
goto l;
|
return ...;
)
...+> }

Signed-off-by: Quentin Lambert <lambert.quentin@gmail.com>
Acked-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

show more ...

PM: Drop CONFIG_PM_RUNTIME from the driver core

After commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is
selected) PM_RUNTIME is always set if PM is set, so quite a few
depend on CONFIG

PM: Drop CONFIG_PM_RUNTIME from the driver core

After commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is
selected) PM_RUNTIME is always set if PM is set, so quite a few
depend on CONFIG_PM or even may be dropped entirely in some cases.

Replace CONFIG_PM_RUNTIME with CONFIG_PM in the PM core code.

Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

show more ...

PM / clock_ops: make __pm_clk_enable more generic

Now there are two places in code which do the same things,
so allow __pm_clk_enable() to accept pointer on pm_clock_entry
structure as second parame

PM / clock_ops: make __pm_clk_enable more generic

Now there are two places in code which do the same things,
so allow __pm_clk_enable() to accept pointer on pm_clock_entry
structure as second parameter instead of pointer on clock and
remove duplicated code.

Also, updated function intended to be used by following patch.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

show more ...

PM / clock_ops: Add pm_clk_add_clk()

The existing pm_clk_add() allows to pass a clock by con_id. However,
when referring to a specific clock from DT, no con_id is available.

Add pm_clk_add_clk(), w

PM / clock_ops: Add pm_clk_add_clk()

The existing pm_clk_add() allows to pass a clock by con_id. However,
when referring to a specific clock from DT, no con_id is available.

Add pm_clk_add_clk(), which allows to specify the struct clk * directly.
The will will increment refcount on clock pointer, so the caller has
to use clk_put() on clock pointer when done.

Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Reviewed-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

show more ...

PM / clk: Fix crash in clocks management code if !CONFIG_PM_RUNTIME

Unlike the clocks management code for runtime PM, the code used for
system suspend does not check the pm_clock_entry.status field.

PM / clk: Fix crash in clocks management code if !CONFIG_PM_RUNTIME

Unlike the clocks management code for runtime PM, the code used for
system suspend does not check the pm_clock_entry.status field.
If pm_clk_acquire() failed, ce->status will be PCE_STATUS_ERROR, and
ce->clk will be a negative error code (e.g. 0xfffffffe = -2 = -ENOENT).

Depending on the clock implementation, suspend or resume may crash with:

Unable to handle kernel NULL pointer dereference at virtual address 00000026

(CCF clk_disable() has an IS_ERR_OR_NULL() check, while CCF clk_enable()
only has a NULL check; pre-CCF implementations may behave differently)

While just checking for PCE_STATUS_ERROR would be sufficient, it doesn't
hurt to use the same state machine as is done for runtime PM, as this
makes the two versions more similar, and eligible for a future
consolidation.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

show more ...