accel/habanalabs: remove support for mmu disable

As mmu disable mode is only used for bring-up stages, let's remove this
option and all code related to it.

Signed-off-by: Ofir Bitton <obitton@haban

accel/habanalabs: remove support for mmu disable

As mmu disable mode is only used for bring-up stages, let's remove this
option and all code related to it.

Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

show more ...

accel/habanalabs: sync f/w events interrupt in hard reset

Receiving events from FW, while the device is in hard reset, causes
a warning message in Driver log. The message may point to a
problem in t

accel/habanalabs: sync f/w events interrupt in hard reset

Receiving events from FW, while the device is in hard reset, causes
a warning message in Driver log. The message may point to a
problem in the Driver or FW. But It also can appear as a result
of events that have been sent from FW just before the hard reset.
In order to avoid receiving events from FW while the device is in reset
and is already in 'disabled' mode, sync the f/w events interrupt right
before setting the device to 'disabled'.

Signed-off-by: Tal Cohen <talcohen@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

show more ...

accel/habanalabs: in hw_fini return error code if polling timed-out

In hw_fini callback, we use either the cpucp packet method or polling a
register. Currently we return error only in the case of cp

accel/habanalabs: in hw_fini return error code if polling timed-out

In hw_fini callback, we use either the cpucp packet method or polling a
register. Currently we return error only in the case of cpucp packet
failure. In this patch we also return error if polling timed out.

Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

show more ...

accel/habanalabs: assert return value of hw_fini

Since hw_fini return error code for failure indication, we should
check its return value. Currently it might only fail upon soft-reset
from hl_device

accel/habanalabs: assert return value of hw_fini

Since hw_fini return error code for failure indication, we should
check its return value. Currently it might only fail upon soft-reset
from hl_device_reset. Later patch will add hw_fini failure in case of
polling timeout in hard-reset.

Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

show more ...

accel/habanalabs: change hw_fini to return int to indicate error

We later use cpucp packet for soft reset which might fail
so we should be able propagate the failure case.

Signed-off-by: Dafna Hirs

accel/habanalabs: change hw_fini to return int to indicate error

We later use cpucp packet for soft reset which might fail
so we should be able propagate the failure case.

Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>

show more ...

accel/habanalabs: add support for TPC assert

In order to allow TPC engines to raise an assert, we must expose
the relevant MSIX interrupt to the user so he will configure the engine
correctly. In ad

accel/habanalabs: add support for TPC assert

In order to allow TPC engines to raise an assert, we must expose
the relevant MSIX interrupt to the user so he will configure the engine
correctly. In addition, we implement the corresponding interrupt
handler that will notify the user upon such an event.

Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>

show more ...

habanalabs: add set engines masks ASIC function

This function shall be used whenever components enable/binning masks
should be updated.

Usage is in one of the below cases:
- update user (or default

habanalabs: add set engines masks ASIC function

This function shall be used whenever components enable/binning masks
should be updated.

Usage is in one of the below cases:
- update user (or default) component masks
- update when getting the masks from FW (either CPUCP or COMMS)

Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

show more ...

habanalabs: move driver to accel subsystem

Now that we have a subsystem for compute accelerators, move the
habanalabs driver to it.

This patch only moves the files and fixes the Makefiles. Future
p

habanalabs: move driver to accel subsystem

Now that we have a subsystem for compute accelerators, move the
habanalabs driver to it.

This patch only moves the files and fixes the Makefiles. Future
patches will change the existing code to register to the accel
subsystem and expose the accel device char files instead of the
habanalabs device char files.

Update the MAINTAINERS file to reflect this change.

Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

show more ...