scsi: block: Improve checks in blk_revalidate_disk_zones()

blk_revalidate_disk_zones() implements checks of the zones of a zoned
block device, verifying that the zone size is a power of 2 number of

scsi: block: Improve checks in blk_revalidate_disk_zones()

blk_revalidate_disk_zones() implements checks of the zones of a zoned
block device, verifying that the zone size is a power of 2 number of
sectors, that all zones (except possibly the last one) have the same
size and that zones cover the entire addressing space of the device.

While these checks are appropriate to verify that well tested hardware
devices have an adequate zone configurations, they lack in certain areas
which may result in issues with emulated devices implemented with user
drivers such as ublk or tcmu. Specifically, this function does not
check if the device driver indicated support for the mandatory zone
append writes, that is, if the device max_zone_append_sectors queue
limit is set to a non-zero value. Additionally, invalid zones such as
a zero length zone with a start sector equal to the device capacity will
not be detected and result in out of bounds use of the zone bitmaps
prepared with the callback function blk_revalidate_zone_cb().

Improve blk_revalidate_disk_zones() to address these inadequate checks,
relying on the fact that all device drivers supporting zoned block
devices must set the device zone size (chunk_sectors queue limit) and
the max_zone_append_sectors queue limit before executing this function.

The check for a non-zero max_zone_append_sectors value is done in
blk_revalidate_disk_zones() before executing the zone report. The zone
report callback function blk_revalidate_zone_cb() is also modified to
add a check that a zone start is below the device capacity.

The check that the zone size is a power of 2 number of sectors is moved
to blk_revalidate_disk_zones() as the zone size is already known.
Similarly, the number of zones of the device can be calculated in
blk_revalidate_disk_zones() before executing the zone report.

The kdoc comment for blk_revalidate_disk_zones() is also updated to
mention that device drivers must set the device zone size and the
max_zone_append_sectors queue limit before calling this function.

Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230703024812.76778-6-dlemoal@kernel.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

block: replace fmode_t with a block-specific type for block open flags

The only overlap between the block open flags mapped into the fmode_t and
other uses of fmode_t are FMODE_READ and FMODE_WRITE.

block: replace fmode_t with a block-specific type for block open flags

The only overlap between the block open flags mapped into the fmode_t and
other uses of fmode_t are FMODE_READ and FMODE_WRITE. Define a new
blk_mode_t instead for use in blkdev_get_by_{dev,path}, ->open and
->ioctl and stop abusing fmode_t.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jack Wang <jinpu.wang@ionos.com> [rnbd]
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Link: https://lore.kernel.org/r/20230608110258.189493-28-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

show more ...

block: remove unused fmode_t arguments from ioctl handlers

A few ioctl handlers have fmode_t arguments that are entirely unused,
remove them.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by:

block: remove unused fmode_t arguments from ioctl handlers

A few ioctl handlers have fmode_t arguments that are entirely unused,
remove them.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20230608110258.189493-27-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

show more ...

block: Introduce blk_rq_is_seq_zoned_write()

Introduce the function blk_rq_is_seq_zoned_write(). This function will
be used in later patches to preserve the order of zoned writes that
require write

block: Introduce blk_rq_is_seq_zoned_write()

Introduce the function blk_rq_is_seq_zoned_write(). This function will
be used in later patches to preserve the order of zoned writes that
require write serialization.

This patch includes an optimization: instead of using
rq->q->disk->part0->bd_queue to check whether or not the queue is
associated with a zoned block device, use rq->q->disk->queue.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Damien Le Moal <dlemoal@kernel.org>
Cc: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230517174230.897144-6-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>

show more ...

block: Simplify blk_req_needs_zone_write_lock()

Remove the blk_rq_is_passthrough() check because it is redundant:
blk_req_needs_zone_write_lock() also calls bdev_op_is_zoned_write()
and the latter f

block: Simplify blk_req_needs_zone_write_lock()

Remove the blk_rq_is_passthrough() check because it is redundant:
blk_req_needs_zone_write_lock() also calls bdev_op_is_zoned_write()
and the latter function returns false for pass-through requests.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230517174230.897144-3-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>

show more ...

block: remove more NULL checks after bdev_get_queue()

bdev_get_queue() never returns NULL. Several commits [1][2] have been made
before to remove such superfluous checks, but some still remained.

F

block: remove more NULL checks after bdev_get_queue()

bdev_get_queue() never returns NULL. Several commits [1][2] have been made
before to remove such superfluous checks, but some still remained.

For places where bdev_get_queue() is called solely for NULL checks, it is
removed entirely.

[1] commit ec9fd2a13d74 ("blk-lib: don't check bdev_get_queue() NULL check")
[2] commit fea127b36c93 ("block: remove superfluous check for request queue in bdev_is_zoned()")

Signed-off-by: Juhyung Park <qkrwngud825@gmail.com>
Reviewed-by: Pankaj Raghav <p.raghav@samsung.com>
Link: https://lore.kernel.org/r/20230203024029.48260-1-qkrwngud825@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

show more ...

block: add a new helper bdev_{is_zone_start, offset_from_zone_start}

Instead of open coding to check for zone start, add a helper to improve
readability and store the logic in one place.

Reviewed-b

block: add a new helper bdev_{is_zone_start, offset_from_zone_start}

Instead of open coding to check for zone start, add a helper to improve
readability and store the logic in one place.

Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230110143635.77300-3-p.raghav@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

show more ...

block: adapt blk_mq_plug() to not plug for writes that require a zone lock

The current implementation of blk_mq_plug() disables plugging for all
operations that involves a transfer to the device as

block: adapt blk_mq_plug() to not plug for writes that require a zone lock

The current implementation of blk_mq_plug() disables plugging for all
operations that involves a transfer to the device as we just check if
the last bit in op_is_write() function.

Modify blk_mq_plug() to disable plugging only for REQ_OP_WRITE and
REQ_OP_WRITE_ZEROS as they might require a zone lock.

Suggested-by: Christoph Hellwig <hch@lst.de>
Suggested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20220929074745.103073-2-p.raghav@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

show more ...

treewide: Rename enum req_opf into enum req_op

The type name enum req_opf is misleading since it suggests that values of
this type include both an operation type and flags. Since values of this
type

treewide: Rename enum req_opf into enum req_op

The type name enum req_opf is misleading since it suggests that values of
this type include both an operation type and flags. Since values of this
type represent an operation only, change the type name into enum req_op.

Convert the enum req_op documentation into kernel-doc format. Move a few
definitions such that the enum req_op documentation occurs just above
the enum req_op definition.

The name "req_opf" was introduced by commit ef295ecf090d ("block: better op
and flags encoding").

Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Damien Le Moal <damien.lemoal@wdc.com>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-2-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>

show more ...

block: move zone related fields to struct gendisk

Move the zone related fields that are currently stored in
struct request_queue to struct gendisk as these are part of the highlevel
block layer API

block: move zone related fields to struct gendisk

Move the zone related fields that are currently stored in
struct request_queue to struct gendisk as these are part of the highlevel
block layer API and are only used for non-passthrough I/O that requires
the gendisk.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20220706070350.1703384-17-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

show more ...

block: use bdev based helpers in blkdev_zone_mgmt{,all}

Use the bdev based helpers instead of the queue based ones to clean up
the code a bit and prepare for storing all zone related fields in
struc

block: use bdev based helpers in blkdev_zone_mgmt{,all}

Use the bdev based helpers instead of the queue based ones to clean up
the code a bit and prepare for storing all zone related fields in
struct gendisk.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20220706070350.1703384-13-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

show more ...

block: replace blkdev_nr_zones with bdev_nr_zones

Pass a block_device instead of a request_queue as that is what most
callers have at hand.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by

block: replace blkdev_nr_zones with bdev_nr_zones

Pass a block_device instead of a request_queue as that is what most
callers have at hand.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Link: https://lore.kernel.org/r/20220706070350.1703384-12-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

show more ...

block: pass a gendisk to blk_queue_free_zone_bitmaps

Switch to a gendisk based API in preparation for moving all zone related
fields from the request_queue to the gendisk.

Signed-off-by: Christoph

block: pass a gendisk to blk_queue_free_zone_bitmaps

Switch to a gendisk based API in preparation for moving all zone related
fields from the request_queue to the gendisk.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20220706070350.1703384-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

show more ...

block: pass a gendisk to blk_queue_clear_zone_settings

Switch to a gendisk based API in preparation for moving all zone related
fields from the request_queue to the gendisk.

Signed-off-by: Christop

block: pass a gendisk to blk_queue_clear_zone_settings

Switch to a gendisk based API in preparation for moving all zone related
fields from the request_queue to the gendisk.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20220706070350.1703384-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

show more ...

block: use bdev_is_zoned instead of open coding it

Use bdev_is_zoned in all places where a block_device is available instead
of open coding it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewe

block: use bdev_is_zoned instead of open coding it

Use bdev_is_zoned in all places where a block_device is available instead
of open coding it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20220706070350.1703384-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

show more ...

scsi: block: Remove REQ_OP_WRITE_SAME support

No more users of REQ_OP_WRITE_SAME or drivers implementing it are left,
so remove the infrastructure.

[mkp: fold in and tweak sysfs reporting fix]

Lin

scsi: block: Remove REQ_OP_WRITE_SAME support

No more users of REQ_OP_WRITE_SAME or drivers implementing it are left,
so remove the infrastructure.

[mkp: fold in and tweak sysfs reporting fix]

Link: https://lore.kernel.org/r/20220209082828.2629273-8-hch@lst.de
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

block: pass a block_device and opf to bio_init

Pass the block_device that we plan to use this bio for and the
operation to bio_init to optimize the assignment. A NULL block_device
can be passed, bo

block: pass a block_device and opf to bio_init

Pass the block_device that we plan to use this bio for and the
operation to bio_init to optimize the assignment. A NULL block_device
can be passed, both for the passthrough case on a raw request_queue and
to temporarily avoid refactoring some nasty code.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220124091107.642561-19-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

show more ...

block: pass a block_device and opf to blk_next_bio

All callers need to set the block_device and operation, so lift that into
the common code.

Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Sign

block: pass a block_device and opf to blk_next_bio

All callers need to set the block_device and operation, so lift that into
the common code.

Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220124091107.642561-15-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

show more ...

block: Hold invalidate_lock in BLKRESETZONE ioctl

When BLKRESETZONE ioctl and data read race, the data read leaves stale
page cache. The commit e5113505904e ("block: Discard page cache of zone
reset

block: Hold invalidate_lock in BLKRESETZONE ioctl

When BLKRESETZONE ioctl and data read race, the data read leaves stale
page cache. The commit e5113505904e ("block: Discard page cache of zone
reset target range") added page cache truncation to avoid stale page
cache after the ioctl. However, the stale page cache still can be read
during the reset zone operation for the ioctl. To avoid the stale page
cache completely, hold invalidate_lock of the block device file mapping.

Fixes: e5113505904e ("block: Discard page cache of zone reset target range")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Cc: stable@vger.kernel.org # v5.15
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20211111085238.942492-1-shinichiro.kawasaki@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

show more ...

block: Hold invalidate_lock in BLKRESETZONE ioctl

commit 86399ea071099ec8ee0a83ac9ad67f7df96a50ad upstream.

When BLKRESETZONE ioctl and data read race, the data read leaves stale
page cache. The co

block: Hold invalidate_lock in BLKRESETZONE ioctl

commit 86399ea071099ec8ee0a83ac9ad67f7df96a50ad upstream.

When BLKRESETZONE ioctl and data read race, the data read leaves stale
page cache. The commit e5113505904e ("block: Discard page cache of zone
reset target range") added page cache truncation to avoid stale page
cache after the ioctl. However, the stale page cache still can be read
during the reset zone operation for the ioctl. To avoid the stale page
cache completely, hold invalidate_lock of the block device file mapping.

Fixes: e5113505904e ("block: Discard page cache of zone reset target range")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Cc: stable@vger.kernel.org # v5.15
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20211111085238.942492-1-shinichiro.kawasaki@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

blk-zoned: allow BLKREPORTZONE without CAP_SYS_ADMIN

A user space process should not need the CAP_SYS_ADMIN capability set
in order to perform a BLKREPORTZONE ioctl.

Getting the zone report is requ

blk-zoned: allow BLKREPORTZONE without CAP_SYS_ADMIN

A user space process should not need the CAP_SYS_ADMIN capability set
in order to perform a BLKREPORTZONE ioctl.

Getting the zone report is required in order to get the write pointer.
Neither read() nor write() requires CAP_SYS_ADMIN, so it is reasonable
that a user space process that can read/write from/to the device, also
can get the write pointer. (Since e.g. writes have to be at the write
pointer.)

Fixes: 3ed05a987e0f ("blk-zoned: implement ioctls")
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Aravind Ramesh <aravind.ramesh@wdc.com>
Reviewed-by: Adam Manzanares <a.manzanares@samsung.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: stable@vger.kernel.org # v4.10+
Link: https://lore.kernel.org/r/20210811110505.29649-3-Niklas.Cassel@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

show more ...

blk-zoned: allow zone management send operations without CAP_SYS_ADMIN

Zone management send operations (BLKRESETZONE, BLKOPENZONE, BLKCLOSEZONE
and BLKFINISHZONE) should be allowed under the same pe

blk-zoned: allow zone management send operations without CAP_SYS_ADMIN

Zone management send operations (BLKRESETZONE, BLKOPENZONE, BLKCLOSEZONE
and BLKFINISHZONE) should be allowed under the same permissions as write().
(write() does not require CAP_SYS_ADMIN).

Additionally, other ioctls like BLKSECDISCARD and BLKZEROOUT only check if
the fd was successfully opened with FMODE_WRITE.
(They do not require CAP_SYS_ADMIN).

Currently, zone management send operations require both CAP_SYS_ADMIN
and that the fd was successfully opened with FMODE_WRITE.

Remove the CAP_SYS_ADMIN requirement, so that zone management send
operations match the access control requirement of write(), BLKSECDISCARD
and BLKZEROOUT.

Fixes: 3ed05a987e0f ("blk-zoned: implement ioctls")
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Aravind Ramesh <aravind.ramesh@wdc.com>
Reviewed-by: Adam Manzanares <a.manzanares@samsung.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: stable@vger.kernel.org # v4.10+
Link: https://lore.kernel.org/r/20210811110505.29649-2-Niklas.Cassel@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

show more ...

block: improve handling of all zones reset operation

SCSI, ZNS and null_blk zoned devices support resetting all zones using
a single command (REQ_OP_ZONE_RESET_ALL), as indicated using the device
re

block: improve handling of all zones reset operation

SCSI, ZNS and null_blk zoned devices support resetting all zones using
a single command (REQ_OP_ZONE_RESET_ALL), as indicated using the device
request queue flag QUEUE_FLAG_ZONE_RESETALL. This flag is not set for
device mapper targets creating zoned devices. In this case, a user
request for resetting all zones of a device is processed in
blkdev_zone_mgmt() by issuing a REQ_OP_ZONE_RESET operation for each
zone of the device. This leads to different behaviors of the
BLKRESETZONE ioctl() depending on the target device support for the
reset all operation. E.g.

blkzone reset /dev/sdX

will reset all zones of a SCSI device using a single command that will
ignore conventional, read-only or offline zones.

But a dm-linear device including conventional, read-only or offline
zones cannot be reset in the same manner as some of the single zone
reset operations issued by blkdev_zone_mgmt() will fail. E.g.:

blkzone reset /dev/dm-Y
blkzone: /dev/dm-0: BLKRESETZONE ioctl failed: Remote I/O error

To simplify applications and tools development, unify the behavior of
the all-zone reset operation by modifying blkdev_zone_mgmt() to not
issue a zone reset operation for conventional, read-only and offline
zones, thus mimicking what an actual reset-all device command does on a
device supporting REQ_OP_ZONE_RESET_ALL. This emulation is done using
the new function blkdev_zone_reset_all_emulated(). The zones needing a
reset are identified using a bitmap that is initialized using a zone
report. Since empty zones do not need a reset, also ignore these zones.
The function blkdev_zone_reset_all() is introduced for block devices
natively supporting reset all operations. blkdev_zone_mgmt() is modified
to call either function to execute an all zone reset request.

Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
[hch: split into multiple functions]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

show more ...

blk-zoned: Remove the definition of blk_zone_start()

Commit e76239a3748c ("block: add a report_zones method") removed the last
blk_zone_start() call. Hence also remove the definition of this functio

blk-zoned: Remove the definition of blk_zone_start()

Commit e76239a3748c ("block: add a report_zones method") removed the last
blk_zone_start() call. Hence also remove the definition of this function.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210406200820.15180-1-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>

show more ...

block: Discard page cache of zone reset target range

When zone reset ioctl and data read race for a same zone on zoned block
devices, the data read leaves stale page cache even though the zone
reset

block: Discard page cache of zone reset target range

When zone reset ioctl and data read race for a same zone on zoned block
devices, the data read leaves stale page cache even though the zone
reset ioctl zero clears all the zone data on the device. To avoid
non-zero data read from the stale page cache after zone reset, discard
page cache of reset target zones in blkdev_zone_mgmt_ioctl(). Introduce
the helper function blkdev_truncate_zone_range() to discard the page
cache. Ensure the page cache discarded by calling the helper function
before and after zone reset in same manner as fallocate does.

This patch can be applied back to the stable kernel version v5.10.y.
Rework is needed for older stable kernels.

Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Fixes: 3ed05a987e0f ("blk-zoned: implement ioctls")
Cc: <stable@vger.kernel.org> # 5.10+
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20210311072546.678999-1-shinichiro.kawasaki@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

show more ...