x86: improve on the non-rep 'clear_user' function

The old version was oddly written to have the repeat count in multiple
registers. So instead of taking advantage of %rax being zero, it had
some su

x86: improve on the non-rep 'clear_user' function

The old version was oddly written to have the repeat count in multiple
registers. So instead of taking advantage of %rax being zero, it had
some sub-counts in it. All just for a "single word clearing" loop,
which isn't even efficient to begin with.

So get rid of those games, and just keep all the state in the same
registers we got it in (and that we should return things in). That not
only makes this act much more like 'rep stos' (which this function is
replacing), but makes it much easier to actually do the obvious loop
unrolling.

Also rename the function from the now nonsensical 'clear_user_original'
to what it now clearly is: 'rep_stos_alternative'.

End result: if we don't have a fast 'rep stosb', at least we can have a
fast fallback for it.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

show more ...

x86: don't use REP_GOOD or ERMS for user memory clearing

The modern target to use is FSRS (Fast Short REP STOS), and the other
cases should only be used for bigger areas (ie mainly things like page

x86: don't use REP_GOOD or ERMS for user memory clearing

The modern target to use is FSRS (Fast Short REP STOS), and the other
cases should only be used for bigger areas (ie mainly things like page
clearing).

Note! This changes the conditional for the inlining from FSRM ("fast
short rep movs") to FSRS ("fast short rep stos").

We'll have a separate fixup for AMD microarchitectures that have a good
'rep stosb' yet do not set the new Intel-specific FSRS bit (because FSRM
was there first).

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

show more ...

x86/clear_user: Make it faster

Based on a patch by Mark Hemment <markhemm@googlemail.com> and
incorporating very sane suggestions from Linus.

The point here is to have the default case with FSRM -

x86/clear_user: Make it faster

Based on a patch by Mark Hemment <markhemm@googlemail.com> and
incorporating very sane suggestions from Linus.

The point here is to have the default case with FSRM - which is supposed
to be the majority of x86 hw out there - if not now then soon - be
directly inlined into the instruction stream so that no function call
overhead is taking place.

Drop the early clobbers from the @size and @addr operands as those are
not needed anymore since we have single instruction alternatives.

The benchmarks I ran would show very small improvements and a PF
benchmark would even show weird things like slowdowns with higher core
counts.

So for a ~6m running the git test suite, the function gets called under
700K times, all from padzero():

<...>-2536 [006] ..... 261.208801: padzero: to: 0x55b0663ed214, size: 3564, cycles: 21900
<...>-2536 [006] ..... 261.208819: padzero: to: 0x7f061adca078, size: 3976, cycles: 17160
<...>-2537 [008] ..... 261.211027: padzero: to: 0x5572d019e240, size: 3520, cycles: 23850
<...>-2537 [008] ..... 261.211049: padzero: to: 0x7f1288dc9078, size: 3976, cycles: 15900
...

which is around 1%-ish of the total time and which is consistent with
the benchmark numbers.

So Mel gave me the idea to simply measure how fast the function becomes.
I.e.:

start = rdtsc_ordered();
ret = __clear_user(to, n);
end = rdtsc_ordered();

Computing the mean average of all the samples collected during the test
suite run then shows some improvement:

clear_user_original:
Amean: 9219.71 (Sum: 6340154910, samples: 687674)

fsrm:
Amean: 8030.63 (Sum: 5522277720, samples: 687652)

That's on Zen3.

The situation looks a lot more confusing on Intel:

Icelake:

clear_user_original:
Amean: 19679.4 (Sum: 13652560764, samples: 693750)
Amean: 19743.7 (Sum: 13693470604, samples: 693562)

(I ran it twice just to be sure.)

ERMS:
Amean: 20374.3 (Sum: 13910601024, samples: 682752)
Amean: 20453.7 (Sum: 14186223606, samples: 693576)

FSRM:
Amean: 20458.2 (Sum: 13918381386, sample s: 680331)

The original microbenchmark which people were complaining about:

for i in $(seq 1 10); do dd if=/dev/zero of=/dev/null bs=1M status=progress count=65536; done 2>&1 | grep copied
32207011840 bytes (32 GB, 30 GiB) copied, 1 s, 32.2 GB/s
68719476736 bytes (69 GB, 64 GiB) copied, 1.93069 s, 35.6 GB/s
37597741056 bytes (38 GB, 35 GiB) copied, 1 s, 37.6 GB/s
68719476736 bytes (69 GB, 64 GiB) copied, 1.78017 s, 38.6 GB/s
62020124672 bytes (62 GB, 58 GiB) copied, 2 s, 31.0 GB/s
68719476736 bytes (69 GB, 64 GiB) copied, 2.13716 s, 32.2 GB/s
60010004480 bytes (60 GB, 56 GiB) copied, 1 s, 60.0 GB/s
68719476736 bytes (69 GB, 64 GiB) copied, 1.14129 s, 60.2 GB/s
53212086272 bytes (53 GB, 50 GiB) copied, 1 s, 53.2 GB/s
68719476736 bytes (69 GB, 64 GiB) copied, 1.28398 s, 53.5 GB/s
55698259968 bytes (56 GB, 52 GiB) copied, 1 s, 55.7 GB/s
68719476736 bytes (69 GB, 64 GiB) copied, 1.22507 s, 56.1 GB/s
55306092544 bytes (55 GB, 52 GiB) copied, 1 s, 55.3 GB/s
68719476736 bytes (69 GB, 64 GiB) copied, 1.23647 s, 55.6 GB/s
54387539968 bytes (54 GB, 51 GiB) copied, 1 s, 54.4 GB/s
68719476736 bytes (69 GB, 64 GiB) copied, 1.25693 s, 54.7 GB/s
50566529024 bytes (51 GB, 47 GiB) copied, 1 s, 50.6 GB/s
68719476736 bytes (69 GB, 64 GiB) copied, 1.35096 s, 50.9 GB/s
58308165632 bytes (58 GB, 54 GiB) copied, 1 s, 58.3 GB/s
68719476736 bytes (69 GB, 64 GiB) copied, 1.17394 s, 58.5 GB/s

Now the same thing with smaller buffers:

for i in $(seq 1 10); do dd if=/dev/zero of=/dev/null bs=1M status=progress count=8192; done 2>&1 | grep copied
8589934592 bytes (8.6 GB, 8.0 GiB) copied, 0.28485 s, 30.2 GB/s
8589934592 bytes (8.6 GB, 8.0 GiB) copied, 0.276112 s, 31.1 GB/s
8589934592 bytes (8.6 GB, 8.0 GiB) copied, 0.29136 s, 29.5 GB/s
8589934592 bytes (8.6 GB, 8.0 GiB) copied, 0.283803 s, 30.3 GB/s
8589934592 bytes (8.6 GB, 8.0 GiB) copied, 0.306503 s, 28.0 GB/s
8589934592 bytes (8.6 GB, 8.0 GiB) copied, 0.349169 s, 24.6 GB/s
8589934592 bytes (8.6 GB, 8.0 GiB) copied, 0.276912 s, 31.0 GB/s
8589934592 bytes (8.6 GB, 8.0 GiB) copied, 0.265356 s, 32.4 GB/s
8589934592 bytes (8.6 GB, 8.0 GiB) copied, 0.28464 s, 30.2 GB/s
8589934592 bytes (8.6 GB, 8.0 GiB) copied, 0.242998 s, 35.3 GB/s

is also not conclusive because it all depends on the buffer sizes,
their alignments and when the microcode detects that cachelines can be
aggregated properly and copied in bigger sizes.

Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/CAHk-=wh=Mu_EYhtOmPn6AxoQZyEh-4fo2Zx3G7rBv1g7vwoKiw@mail.gmail.com

show more ...

x86: Prepare asm files for straight-line-speculation

Replace all ret/retq instructions with RET in preparation of making
RET a macro. Since AS is case insensitive it's a big no-op without
RET define

x86: Prepare asm files for straight-line-speculation

Replace all ret/retq instructions with RET in preparation of making
RET a macro. Since AS is case insensitive it's a big no-op without
RET defined.

find arch/x86/ -name \*.S | while read file
do
sed -i 's/\<ret[q]*\>/RET/' $file
done

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20211204134907.905503893@infradead.org

show more ...

x86: Prepare asm files for straight-line-speculation

[ Upstream commit f94909ceb1ed4bfdb2ada72f93236305e6d6951f ]

Replace all ret/retq instructions with RET in preparation of making
RET a macro. Si

x86: Prepare asm files for straight-line-speculation

[ Upstream commit f94909ceb1ed4bfdb2ada72f93236305e6d6951f ]

Replace all ret/retq instructions with RET in preparation of making
RET a macro. Since AS is case insensitive it's a big no-op without
RET defined.

find arch/x86/ -name \*.S | while read file
do
sed -i 's/\<ret[q]*\>/RET/' $file
done

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20211204134907.905503893@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

x86/asm: Change all ENTRY+ENDPROC to SYM_FUNC_*

These are all functions which are invoked from elsewhere, so annotate
them as global using the new SYM_FUNC_START and their ENDPROC's by
SYM_FUNC_END.

x86/asm: Change all ENTRY+ENDPROC to SYM_FUNC_*

These are all functions which are invoked from elsewhere, so annotate
them as global using the new SYM_FUNC_START and their ENDPROC's by
SYM_FUNC_END.

Make sure ENTRY/ENDPROC is not defined on X86_64, given these were the
last users.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> [hibernate]
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> [xen bits]
Acked-by: Herbert Xu <herbert@gondor.apana.org.au> [crypto]
Cc: Allison Randal <allison@lohutok.net>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Andy Shevchenko <andy@infradead.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Armijn Hemel <armijn@tjaldur.nl>
Cc: Cao jin <caoj.fnst@cn.fujitsu.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Enrico Weigelt <info@metux.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jim Mattson <jmattson@google.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: kvm ML <kvm@vger.kernel.org>
Cc: Len Brown <len.brown@intel.com>
Cc: linux-arch@vger.kernel.org
Cc: linux-crypto@vger.kernel.org
Cc: linux-efi <linux-efi@vger.kernel.org>
Cc: linux-efi@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: platform-driver-x86@vger.kernel.org
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: "Steven Rostedt (VMware)" <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Wanpeng Li <wanpengli@tencent.com>
Cc: Wei Huang <wei@redhat.com>
Cc: x86-ml <x86@kernel.org>
Cc: xen-devel@lists.xenproject.org
Cc: Xiaoyao Li <xiaoyao.li@linux.intel.com>
Link: https://lkml.kernel.org/r/20191011115108.12392-25-jslaby@suse.cz

show more ...

treewide: Add SPDX license identifier for missed files

Add SPDX license identifiers to all files which:

- Have no license information of any form

- Have EXPORT_.*_SYMBOL_GPL inside which was use

treewide: Add SPDX license identifier for missed files

Add SPDX license identifiers to all files which:

- Have no license information of any form

- Have EXPORT_.*_SYMBOL_GPL inside which was used in the
initial scan/conversion to ignore the file

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

GPL-2.0-only

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

x86/asm: Trim clear_page.S includes

After alternatives were shifted to the call site, only 2 headers are
necessary.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: Borislav Petkov

x86/asm: Trim clear_page.S includes

After alternatives were shifted to the call site, only 2 headers are
necessary.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180113190648.GB23111@avx2
Signed-off-by: Ingo Molnar <mingo@kernel.org>

show more ...

x86/asm: Optimize clear_page()

Currently, we CALL clear_page() which then JMPs to the proper function
chosen by the alternatives.

What we should do instead is CALL the proper function directly. (Th

x86/asm: Optimize clear_page()

Currently, we CALL clear_page() which then JMPs to the proper function
chosen by the alternatives.

What we should do instead is CALL the proper function directly. (This
was something Ingo suggested a while ago). So let's do that.

Measuring our favourite kernel build workload shows that there are no
significant changes in performance.

AMD
===
-- /tmp/before 2017-02-09 18:01:46.451961188 +0100
++ /tmp/after 2017-02-09 18:01:54.883961175 +0100
@@ -1,15 +1,15 @@
Performance counter stats for 'system wide' (5 runs):

- 1028960.373643 cpu-clock (msec) # 6.000 CPUs utilized ( +- 1.41% )
+ 1023086.018961 cpu-clock (msec) # 6.000 CPUs utilized ( +- 1.20% )
- 518,744 context-switches # 0.504 K/sec ( +- 1.04% )
+ 518,254 context-switches # 0.507 K/sec ( +- 1.01% )
- 38,112 cpu-migrations # 0.037 K/sec ( +- 1.95% )
+ 37,917 cpu-migrations # 0.037 K/sec ( +- 1.02% )
- 20,874,266 page-faults # 0.020 M/sec ( +- 0.07% )
+ 20,918,897 page-faults # 0.020 M/sec ( +- 0.18% )
- 2,043,646,230,667 cycles # 1.986 GHz ( +- 0.14% ) (66.67%)
+ 2,045,305,584,032 cycles # 1.999 GHz ( +- 0.16% ) (66.67%)
- 553,698,855,431 stalled-cycles-frontend # 27.09% frontend cycles idle ( +- 0.07% ) (66.67%)
+ 555,099,401,413 stalled-cycles-frontend # 27.14% frontend cycles idle ( +- 0.13% ) (66.67%)
- 621,544,286,390 stalled-cycles-backend # 30.41% backend cycles idle ( +- 0.39% ) (66.67%)
+ 621,371,430,254 stalled-cycles-backend # 30.38% backend cycles idle ( +- 0.32% ) (66.67%)
- 1,738,364,431,659 instructions # 0.85 insn per cycle
+ 1,739,895,771,901 instructions # 0.85 insn per cycle
- # 0.36 stalled cycles per insn ( +- 0.11% ) (66.67%)
+ # 0.36 stalled cycles per insn ( +- 0.13% ) (66.67%)
- 391,170,943,850 branches # 380.161 M/sec ( +- 0.13% ) (66.67%)
+ 391,398,551,757 branches # 382.567 M/sec ( +- 0.13% ) (66.67%)
- 22,567,810,411 branch-misses # 5.77% of all branches ( +- 0.11% ) (66.67%)
+ 22,574,726,683 branch-misses # 5.77% of all branches ( +- 0.13% ) (66.67%)

- 171.480741921 seconds time elapsed ( +- 1.41% )
+ 170.509229451 seconds time elapsed ( +- 1.20% )

Intel
=====

-- /tmp/before 2017-02-09 20:36:19.851947473 +0100
++ /tmp/after 2017-02-09 20:36:30.151947458 +0100
@@ -1,15 +1,15 @@
Performance counter stats for 'system wide' (5 runs):

- 2207248.598126 cpu-clock (msec) # 8.000 CPUs utilized ( +- 0.69% )
+ 2213300.106631 cpu-clock (msec) # 8.000 CPUs utilized ( +- 0.73% )
- 899,342 context-switches # 0.407 K/sec ( +- 0.68% )
+ 898,381 context-switches # 0.406 K/sec ( +- 0.79% )
- 80,553 cpu-migrations # 0.036 K/sec ( +- 1.13% )
+ 80,979 cpu-migrations # 0.037 K/sec ( +- 1.11% )
- 36,171,148 page-faults # 0.016 M/sec ( +- 0.02% )
+ 36,179,791 page-faults # 0.016 M/sec ( +- 0.02% )
- 6,665,288,826,484 cycles # 3.020 GHz ( +- 0.07% ) (83.33%)
+ 6,671,638,410,799 cycles # 3.014 GHz ( +- 0.06% ) (83.33%)
- 5,065,975,115,197 stalled-cycles-frontend # 76.01% frontend cycles idle ( +- 0.11% ) (83.33%)
+ 5,076,835,183,223 stalled-cycles-frontend # 76.10% frontend cycles idle ( +- 0.11% ) (83.33%)
- 3,841,556,350,614 stalled-cycles-backend # 57.64% backend cycles idle ( +- 0.13% ) (66.67%)
+ 3,852,823,974,333 stalled-cycles-backend # 57.75% backend cycles idle ( +- 0.12% ) (66.67%)
- 4,148,398,171,079 instructions # 0.62 insn per cycle
+ 4,148,997,156,059 instructions # 0.62 insn per cycle
- # 1.22 stalled cycles per insn ( +- 0.10% ) (83.33%)
+ # 1.22 stalled cycles per insn ( +- 0.11% ) (83.33%)
- 887,187,118,591 branches # 401.943 M/sec ( +- 0.09% ) (83.33%)
+ 887,271,341,121 branches # 400.882 M/sec ( +- 0.11% ) (83.33%)
- 30,139,439,034 branch-misses # 3.40% of all branches ( +- 0.09% ) (83.33%)
+ 30,134,864,997 branch-misses # 3.40% of all branches ( +- 0.06% ) (83.33%)

- 275.904405540 seconds time elapsed ( +- 0.69% )
+ 276.660352016 seconds time elapsed ( +- 0.73% )

allmodconfig vmlinux size grows by a ~1Kb but that's fine - we optimize
our calling of the clear_page variants.

text data bss dec hex filename
9051979 23067670 27009024 59128673 3863b61 vmlinux
9053000 23067670 27009024 59129694 3863f5e vmlinux.clear_page

Reported-by: kernel test robot <fengguang.wu@intel.com>
Tested-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170215111927.emdgxf2pide3kwro@pd.tnic
Signed-off-by: Ingo Molnar <mingo@kernel.org>

show more ...

x86: move exports to actual definitions

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

x86/cpufeature: Carve out X86_FEATURE_*

Move them to a separate header and have the following
dependency:

x86/cpufeatures.h <- x86/processor.h <- x86/cpufeature.h

This makes it easier to use the

x86/cpufeature: Carve out X86_FEATURE_*

Move them to a separate header and have the following
dependency:

x86/cpufeatures.h <- x86/processor.h <- x86/cpufeature.h

This makes it easier to use the header in asm code and not
include the whole cpufeature.h and add guards for asm.

Suggested-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1453842730-28463-5-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>

show more ...

x86/debug: Remove perpetually broken, unmaintainable dwarf annotations

So the dwarf2 annotations in low level assembly code have
become an increasing hindrance: unreadable, messy macros
mixed into s

x86/debug: Remove perpetually broken, unmaintainable dwarf annotations

So the dwarf2 annotations in low level assembly code have
become an increasing hindrance: unreadable, messy macros
mixed into some of the most security sensitive code paths
of the Linux kernel.

These debug info annotations don't even buy the upstream
kernel anything: dwarf driven stack unwinding has caused
problems in the past so it's out of tree, and the upstream
kernel only uses the much more robust framepointers based
stack unwinding method.

In addition to that there's a steady, slow bitrot going
on with these annotations, requiring frequent fixups.
There's no tooling and no functionality upstream that
keeps it correct.

So burn down the sick forest, allowing new, healthier growth:

27 files changed, 350 insertions(+), 1101 deletions(-)

Someone who has the willingness and time to do this
properly can attempt to reintroduce dwarf debuginfo in x86
assembly code plus dwarf unwinding from first principles,
with the following conditions:

- it should be maximally readable, and maximally low-key to
'ordinary' code reading and maintenance.

- find a build time method to insert dwarf annotations
automatically in the most common cases, for pop/push
instructions that manipulate the stack pointer. This could
be done for example via a preprocessing step that just
looks for common patterns - plus special annotations for
the few cases where we want to depart from the default.
We have hundreds of CFI annotations, so automating most of
that makes sense.

- it should come with build tooling checks that ensure that
CFI annotations are sensible. We've seen such efforts from
the framepointer side, and there's no reason it couldn't be
done on the dwarf side.

Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jan Beulich <JBeulich@suse.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>

show more ...

x86/lib/clear_page_64.S: Convert to ALTERNATIVE_2 macro

Move clear_page() up so that we can get 2-byte forward JMPs when
patching:

apply_alternatives: feat: 3*32+16, old: (ffffffff8130adb0, len:

x86/lib/clear_page_64.S: Convert to ALTERNATIVE_2 macro

Move clear_page() up so that we can get 2-byte forward JMPs when
patching:

apply_alternatives: feat: 3*32+16, old: (ffffffff8130adb0, len: 5), repl: (ffffffff81d0b859, len: 5)
ffffffff8130adb0: alt_insn: 90 90 90 90 90
recompute_jump: new_displ: 0x0000003e
ffffffff81d0b859: rpl_insn: eb 3e 66 66 90

even though the compiler generated 5-byte JMPs which we padded with 5
NOPs.

Also, make the REP_GOOD version be the default as the majority of
machines set REP_GOOD. This way we get to save ourselves the JMP:

old insn VA: 0xffffffff813038b0, CPU feat: X86_FEATURE_REP_GOOD, size: 5, padlen: 0
clear_page:

ffffffff813038b0 <clear_page>:
ffffffff813038b0: e9 0b 00 00 00 jmpq ffffffff813038c0
repl insn: 0xffffffff81cf0e92, size: 0

old insn VA: 0xffffffff813038b0, CPU feat: X86_FEATURE_ERMS, size: 5, padlen: 0
clear_page:

ffffffff813038b0 <clear_page>:
ffffffff813038b0: e9 0b 00 00 00 jmpq ffffffff813038c0
repl insn: 0xffffffff81cf0e92, size: 5
ffffffff81cf0e92: e9 69 2a 61 ff jmpq ffffffff81303900

ffffffff813038b0 <clear_page>:
ffffffff813038b0: e9 69 2a 61 ff jmpq ffffffff8091631e

Signed-off-by: Borislav Petkov <bp@suse.de>

show more ...

x86/alternatives: Add instruction padding

Up until now we have always paid attention to make sure the length of
the new instruction replacing the old one is at least less or equal to
the length of t

x86/alternatives: Add instruction padding

Up until now we have always paid attention to make sure the length of
the new instruction replacing the old one is at least less or equal to
the length of the old instruction. If the new instruction is longer, at
the time it replaces the old instruction it will overwrite the beginning
of the next instruction in the kernel image and cause your pants to
catch fire.

So instead of having to pay attention, teach the alternatives framework
to pad shorter old instructions with NOPs at buildtime - but only in the
case when

len(old instruction(s)) < len(new instruction(s))

and add nothing in the >= case. (In that case we do add_nops() when
patching).

This way the alternatives user shouldn't have to care about instruction
sizes and simply use the macros.

Add asm ALTERNATIVE* flavor macros too, while at it.

Also, we need to save the pad length in a separate struct alt_instr
member for NOP optimization and the way to do that reliably is to carry
the pad length instead of trying to detect whether we're looking at
single-byte NOPs or at pathological instruction offsets like e9 90 90 90
90, for example, which is a valid instruction.

Thanks to Michael Matz for the great help with toolchain questions.

Signed-off-by: Borislav Petkov <bp@suse.de>

show more ...

x86, mem: clear_page_64.S: Support clear_page() with enhanced REP MOVSB/STOSB

Intel processors are adding enhancements to REP MOVSB/STOSB and the use of
REP MOVSB/STOSB for optimal memcpy/memset or

x86, mem: clear_page_64.S: Support clear_page() with enhanced REP MOVSB/STOSB

Intel processors are adding enhancements to REP MOVSB/STOSB and the use of
REP MOVSB/STOSB for optimal memcpy/memset or similar functions is recommended.
Enhancement availability is indicated by CPUID.7.0.EBX[9] (Enhanced REP MOVSB/
STOSB).

Support clear_page() with rep stosb for processor supporting enhanced REP MOVSB
/STOSB. On processors supporting enhanced REP MOVSB/STOSB, the alternative
clear_page_c_e function using enhanced REP STOSB overrides the original function
and the fast string function.

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: http://lkml.kernel.org/r/1305671358-14478-6-git-send-email-fenghua.yu@intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>

show more ...

x86, alternatives: Use 16-bit numbers for cpufeature index

We already have cpufeature indicies above 255, so use a 16-bit number
for the alternatives index. This consumes a padding field and so
doe

x86, alternatives: Use 16-bit numbers for cpufeature index

We already have cpufeature indicies above 255, so use a 16-bit number
for the alternatives index. This consumes a padding field and so
doesn't add any size, but it means that abusing the padding field to
create assembly errors on overflow no longer works. We can retain the
test simply by redirecting it to the .discard section, however.

[ v3: updated to include open-coded locations ]

Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
LKML-Reference: <tip-f88731e3068f9d1392ba71cc9f50f035d26a0d4f@git.kernel.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>

show more ...

x86: Fix symbol annotation for arch/x86/lib/clear_page_64.S::clear_page_c

Noticed the zero-sized function symbol while looking at 'perf' profiles,
it causes the profiler to display those addresses i

x86: Fix symbol annotation for arch/x86/lib/clear_page_64.S::clear_page_c

Noticed the zero-sized function symbol while looking at 'perf' profiles,
it causes the profiler to display those addresses in hexa.

Turns out that this was wrong/bogus for an eternity.

Signed-off-by: Mike Galbraith <efault@gmx.de>
Acked-by: Alexander van Heukelum <heukelum@fastmail.fm>
Acked-by: Cyrill Gorcunov <gorcunov@gmail.com>
LKML-Reference: <1246366820.6538.1.camel@marge.simson.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

show more ...

x86_64: move lib

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86/asm: Change all ENTRY+ENDPROC to SYM_FUNC_*

These are all functions which are invoked from elsewhere, so annotate
them as global using the new SYM_FUNC_START and their ENDPROC's by

x86/asm: Change all ENTRY+ENDPROC to SYM_FUNC_*

These are all functions which are invoked from elsewhere, so annotate
them as global using the new SYM_FUNC_START and their ENDPROC's by
SYM_FUNC_END.

Make sure ENTRY/ENDPROC is not defined on X86_64, given these were the
last users.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> [hibernate]
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> [xen bits]
Acked-by: Herbert Xu <herbert@gondor.apana.org.au> [crypto]
Cc: Allison Randal <allison@lohutok.net>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Andy Shevchenko <andy@infradead.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Armijn Hemel <armijn@tjaldur.nl>
Cc: Cao jin <caoj.fnst@cn.fujitsu.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Enrico Weigelt <info@metux.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jim Mattson <jmattson@google.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: kvm ML <kvm@vger.kernel.org>
Cc: Len Brown <len.brown@intel.com>
Cc: linux-arch@vger.kernel.org
Cc: linux-crypto@vger.kernel.org
Cc: linux-efi <linux-efi@vger.kernel.org>
Cc: linux-efi@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: platform-driver-x86@vger.kernel.org
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: "Steven Rostedt (VMware)" <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Wanpeng Li <wanpengli@tencent.com>
Cc: Wei Huang <wei@redhat.com>
Cc: x86-ml <x86@kernel.org>
Cc: xen-devel@lists.xenproject.org
Cc: Xiaoyao Li <xiaoyao.li@linux.intel.com>
Link: https://lkml.kernel.org/r/20191011115108.12392-25-jslaby@suse.cz

show more ...

treewide: Add SPDX license identifier for missed files

Add SPDX license identifiers to all files which:

- Have no license information of any form

- Have EXPORT_.*_SYMBOL_

treewide: Add SPDX license identifier for missed files

Add SPDX license identifiers to all files which:

- Have no license information of any form

- Have EXPORT_.*_SYMBOL_GPL inside which was used in the
initial scan/conversion to ignore the file

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

GPL-2.0-only

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

x86/asm: Trim clear_page.S includes

After alternatives were shifted to the call site, only 2 headers are
necessary.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Revi

x86/asm: Trim clear_page.S includes

After alternatives were shifted to the call site, only 2 headers are
necessary.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180113190648.GB23111@avx2
Signed-off-by: Ingo Molnar <mingo@kernel.org>

show more ...

x86/asm: Optimize clear_page()

Currently, we CALL clear_page() which then JMPs to the proper function
chosen by the alternatives.

What we should do instead is CALL the proper fu

x86/asm: Optimize clear_page()

Currently, we CALL clear_page() which then JMPs to the proper function
chosen by the alternatives.

What we should do instead is CALL the proper function directly. (This
was something Ingo suggested a while ago). So let's do that.

Measuring our favourite kernel build workload shows that there are no
significant changes in performance.

AMD
===
-- /tmp/before 2017-02-09 18:01:46.451961188 +0100
++ /tmp/after 2017-02-09 18:01:54.883961175 +0100
@@ -1,15 +1,15 @@
Performance counter stats for 'system wide' (5 runs):

- 1028960.373643 cpu-clock (msec) # 6.000 CPUs utilized ( +- 1.41% )
+ 1023086.018961 cpu-clock (msec) # 6.000 CPUs utilized ( +- 1.20% )
- 518,744 context-switches # 0.504 K/sec ( +- 1.04% )
+ 518,254 context-switches # 0.507 K/sec ( +- 1.01% )
- 38,112 cpu-migrations # 0.037 K/sec ( +- 1.95% )
+ 37,917 cpu-migrations # 0.037 K/sec ( +- 1.02% )
- 20,874,266 page-faults # 0.020 M/sec ( +- 0.07% )
+ 20,918,897 page-faults # 0.020 M/sec ( +- 0.18% )
- 2,043,646,230,667 cycles # 1.986 GHz ( +- 0.14% ) (66.67%)
+ 2,045,305,584,032 cycles # 1.999 GHz ( +- 0.16% ) (66.67%)
- 553,698,855,431 stalled-cycles-frontend # 27.09% frontend cycles idle ( +- 0.07% ) (66.67%)
+ 555,099,401,413 stalled-cycles-frontend # 27.14% frontend cycles idle ( +- 0.13% ) (66.67%)
- 621,544,286,390 stalled-cycles-backend # 30.41% backend cycles idle ( +- 0.39% ) (66.67%)
+ 621,371,430,254 stalled-cycles-backend # 30.38% backend cycles idle ( +- 0.32% ) (66.67%)
- 1,738,364,431,659 instructions # 0.85 insn per cycle
+ 1,739,895,771,901 instructions # 0.85 insn per cycle
- # 0.36 stalled cycles per insn ( +- 0.11% ) (66.67%)
+ # 0.36 stalled cycles per insn ( +- 0.13% ) (66.67%)
- 391,170,943,850 branches # 380.161 M/sec ( +- 0.13% ) (66.67%)
+ 391,398,551,757 branches # 382.567 M/sec ( +- 0.13% ) (66.67%)
- 22,567,810,411 branch-misses # 5.77% of all branches ( +- 0.11% ) (66.67%)
+ 22,574,726,683 branch-misses # 5.77% of all branches ( +- 0.13% ) (66.67%)

- 171.480741921 seconds time elapsed ( +- 1.41% )
+ 170.509229451 seconds time elapsed ( +- 1.20% )

Intel
=====

-- /tmp/before 2017-02-09 20:36:19.851947473 +0100
++ /tmp/after 2017-02-09 20:36:30.151947458 +0100
@@ -1,15 +1,15 @@
Performance counter stats for 'system wide' (5 runs):

- 2207248.598126 cpu-clock (msec) # 8.000 CPUs utilized ( +- 0.69% )
+ 2213300.106631 cpu-clock (msec) # 8.000 CPUs utilized ( +- 0.73% )
- 899,342 context-switches # 0.407 K/sec ( +- 0.68% )
+ 898,381 context-switches # 0.406 K/sec ( +- 0.79% )
- 80,553 cpu-migrations # 0.036 K/sec ( +- 1.13% )
+ 80,979 cpu-migrations # 0.037 K/sec ( +- 1.11% )
- 36,171,148 page-faults # 0.016 M/sec ( +- 0.02% )
+ 36,179,791 page-faults # 0.016 M/sec ( +- 0.02% )
- 6,665,288,826,484 cycles # 3.020 GHz ( +- 0.07% ) (83.33%)
+ 6,671,638,410,799 cycles # 3.014 GHz ( +- 0.06% ) (83.33%)
- 5,065,975,115,197 stalled-cycles-frontend # 76.01% frontend cycles idle ( +- 0.11% ) (83.33%)
+ 5,076,835,183,223 stalled-cycles-frontend # 76.10% frontend cycles idle ( +- 0.11% ) (83.33%)
- 3,841,556,350,614 stalled-cycles-backend # 57.64% backend cycles idle ( +- 0.13% ) (66.67%)
+ 3,852,823,974,333 stalled-cycles-backend # 57.75% backend cycles idle ( +- 0.12% ) (66.67%)
- 4,148,398,171,079 instructions # 0.62 insn per cycle
+ 4,148,997,156,059 instructions # 0.62 insn per cycle
- # 1.22 stalled cycles per insn ( +- 0.10% ) (83.33%)
+ # 1.22 stalled cycles per insn ( +- 0.11% ) (83.33%)
- 887,187,118,591 branches # 401.943 M/sec ( +- 0.09% ) (83.33%)
+ 887,271,341,121 branches # 400.882 M/sec ( +- 0.11% ) (83.33%)
- 30,139,439,034 branch-misses # 3.40% of all branches ( +- 0.09% ) (83.33%)
+ 30,134,864,997 branch-misses # 3.40% of all branches ( +- 0.06% ) (83.33%)

- 275.904405540 seconds time elapsed ( +- 0.69% )
+ 276.660352016 seconds time elapsed ( +- 0.73% )

allmodconfig vmlinux size grows by a ~1Kb but that's fine - we optimize
our calling of the clear_page variants.

text data bss dec hex filename
9051979 23067670 27009024 59128673 3863b61 vmlinux
9053000 23067670 27009024 59129694 3863f5e vmlinux.clear_page

Reported-by: kernel test robot <fengguang.wu@intel.com>
Tested-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170215111927.emdgxf2pide3kwro@pd.tnic
Signed-off-by: Ingo Molnar <mingo@kernel.org>

show more ...

x86: move exports to actual definitions

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

x86/cpufeature: Carve out X86_FEATURE_*

Move them to a separate header and have the following
dependency:

x86/cpufeatures.h <- x86/processor.h <- x86/cpufeature.h

Thi

x86/cpufeature: Carve out X86_FEATURE_*

Move them to a separate header and have the following
dependency:

x86/cpufeatures.h <- x86/processor.h <- x86/cpufeature.h

This makes it easier to use the header in asm code and not
include the whole cpufeature.h and add guards for asm.

Suggested-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1453842730-28463-5-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>

show more ...

x86/debug: Remove perpetually broken, unmaintainable dwarf annotations

So the dwarf2 annotations in low level assembly code have
become an increasing hindrance: unreadable, messy macros

x86/debug: Remove perpetually broken, unmaintainable dwarf annotations

So the dwarf2 annotations in low level assembly code have
become an increasing hindrance: unreadable, messy macros
mixed into some of the most security sensitive code paths
of the Linux kernel.

These debug info annotations don't even buy the upstream
kernel anything: dwarf driven stack unwinding has caused
problems in the past so it's out of tree, and the upstream
kernel only uses the much more robust framepointers based
stack unwinding method.

In addition to that there's a steady, slow bitrot going
on with these annotations, requiring frequent fixups.
There's no tooling and no functionality upstream that
keeps it correct.

So burn down the sick forest, allowing new, healthier growth:

27 files changed, 350 insertions(+), 1101 deletions(-)

Someone who has the willingness and time to do this
properly can attempt to reintroduce dwarf debuginfo in x86
assembly code plus dwarf unwinding from first principles,
with the following conditions:

- it should be maximally readable, and maximally low-key to
'ordinary' code reading and maintenance.

- find a build time method to insert dwarf annotations
automatically in the most common cases, for pop/push
instructions that manipulate the stack pointer. This could
be done for example via a preprocessing step that just
looks for common patterns - plus special annotations for
the few cases where we want to depart from the default.
We have hundreds of CFI annotations, so automating most of
that makes sense.

- it should come with build tooling checks that ensure that
CFI annotations are sensible. We've seen such efforts from
the framepointer side, and there's no reason it couldn't be
done on the dwarf side.

Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jan Beulich <JBeulich@suse.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>

show more ...