arch: syscalls: simplify uapi/kapi directory creation

$(shell ...) expands to empty. There is no need to assign it to _dummy.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Geert U

arch: syscalls: simplify uapi/kapi directory creation

$(shell ...) expands to empty. There is no need to assign it to _dummy.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>

show more ...

x86: Remove toolchain check for X32 ABI capability

Commit 0bf6276392e9 ("x32: Warn and disable rather than error if
binutils too old") added a small test in arch/x86/Makefile because
binutils 2.22 o

x86: Remove toolchain check for X32 ABI capability

Commit 0bf6276392e9 ("x32: Warn and disable rather than error if
binutils too old") added a small test in arch/x86/Makefile because
binutils 2.22 or newer is needed to properly support elf32-x86-64. This
check is no longer necessary, as the minimum supported version of
binutils is 2.23, which is enforced at configuration time with
scripts/min-tool-version.sh.

Remove this check and replace all uses of CONFIG_X86_X32 with
CONFIG_X86_X32_ABI, as two symbols are no longer necessary.

[nathan: Rebase, fix up a few places where CONFIG_X86_X32 was still
used, and simplify commit message to satisfy -tip requirements]

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220314194842.3452-2-nathan@kernel.org

show more ...

x86/syscalls: Clear 'offset' and 'prefix' in case they are set in env

If the environment variable 'prefix' is set on the build host, it is
wrongly used as syscall macro prefixes.

$ export prefix=

x86/syscalls: Clear 'offset' and 'prefix' in case they are set in env

If the environment variable 'prefix' is set on the build host, it is
wrongly used as syscall macro prefixes.

$ export prefix=/usr
$ make -s defconfig all
In file included from ./arch/x86/include/asm/unistd.h:20,
from <stdin>:2:
./arch/x86/include/generated/uapi/asm/unistd_64.h:4:9: warning: missing whitespace after the macro name
4 | #define __NR_/usrread 0
| ^~~~~

arch/x86/entry/syscalls/Makefile should clear 'offset' and 'prefix'.

Fixes: 3cba325b358f ("x86/syscalls: Switch to generic syscallhdr.sh")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210525115420.679416-1-masahiroy@kernel.org

show more ...

x86/syscalls: Switch to generic syscallhdr.sh

Many architectures duplicate similar shell scripts.

Converts x86 to use scripts/syscallhdr.sh.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
S

x86/syscalls: Switch to generic syscallhdr.sh

Many architectures duplicate similar shell scripts.

Converts x86 to use scripts/syscallhdr.sh.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210517073815.97426-7-masahiroy@kernel.org

show more ...

x86/syscalls: Switch to generic syscalltbl.sh

Many architectures duplicate similar shell scripts.

Convert x86 and UML to use scripts/syscalltbl.sh. The generic script
generates seperate headers for

x86/syscalls: Switch to generic syscalltbl.sh

Many architectures duplicate similar shell scripts.

Convert x86 and UML to use scripts/syscalltbl.sh. The generic script
generates seperate headers for x86/64 and x86/x32 syscalls, while the x86
specific script coalesced them into one. Adjust the code accordingly.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210517073815.97426-3-masahiroy@kernel.org

show more ...

arch: syscalls: remove $(srctree)/ prefix from syscall tables

The 'syscall' variables are not directly used in the commands.
Remove the $(srctree)/ prefix because we can rely on VPATH.

Signed-off-b

arch: syscalls: remove $(srctree)/ prefix from syscall tables

The 'syscall' variables are not directly used in the commands.
Remove the $(srctree)/ prefix because we can rely on VPATH.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

show more ...

arch: syscalls: add missing FORCE and fix 'targets' to make if_changed work

The rules in these Makefiles cannot detect the command line change
because the prerequisite 'FORCE' is missing.

Adding 'F

arch: syscalls: add missing FORCE and fix 'targets' to make if_changed work

The rules in these Makefiles cannot detect the command line change
because the prerequisite 'FORCE' is missing.

Adding 'FORCE' will result in the headers being rebuilt every time
because the 'targets' additions are also wrong; the file paths in
'targets' must be relative to the current Makefile.

Fix all of them so the if_changed rules work correctly.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>

show more ...

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.

For non */uapi/* files that summary was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139

and resulted in the first patch in this series.

If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930

and resulted in the second patch in this series.

- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:

SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1

and that resulted in the third patch in this series.

- when the two scanners agreed on the detected license(s), that became
the concluded license(s).

- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.

- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).

- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.

- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct

This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

x86/build: Beautify build log of syscall headers

This makes the build log look nicer.

Before:
SYSTBL arch/x86/entry/syscalls/../../include/generated/asm/syscalls_32.h
SYSHDR arch/x86/entry/sy

x86/build: Beautify build log of syscall headers

This makes the build log look nicer.

Before:
SYSTBL arch/x86/entry/syscalls/../../include/generated/asm/syscalls_32.h
SYSHDR arch/x86/entry/syscalls/../../include/generated/asm/unistd_32_ia32.h
SYSHDR arch/x86/entry/syscalls/../../include/generated/asm/unistd_64_x32.h
SYSTBL arch/x86/entry/syscalls/../../include/generated/asm/syscalls_64.h
SYSHDR arch/x86/entry/syscalls/../../include/generated/uapi/asm/unistd_32.h
SYSHDR arch/x86/entry/syscalls/../../include/generated/uapi/asm/unistd_64.h
SYSHDR arch/x86/entry/syscalls/../../include/generated/uapi/asm/unistd_x32.h

After:
SYSTBL arch/x86/include/generated/asm/syscalls_32.h
SYSHDR arch/x86/include/generated/asm/unistd_32_ia32.h
SYSHDR arch/x86/include/generated/asm/unistd_64_x32.h
SYSTBL arch/x86/include/generated/asm/syscalls_64.h
SYSHDR arch/x86/include/generated/uapi/asm/unistd_32.h
SYSHDR arch/x86/include/generated/uapi/asm/unistd_64.h
SYSHDR arch/x86/include/generated/uapi/asm/unistd_x32.h

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: linux-kbuild@vger.kernel.org
Link: http://lkml.kernel.org/r/1509077470-2735-1-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

show more ...

x86/asm/entry: Move the arch/x86/syscalls/ definitions to arch/x86/entry/syscalls/

The build time generated syscall definitions are entry code related, move
them into the arch/x86/entry/ directory.

x86/asm/entry: Move the arch/x86/syscalls/ definitions to arch/x86/entry/syscalls/

The build time generated syscall definitions are entry code related, move
them into the arch/x86/entry/ directory.

Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>

show more ...

Merge branch 'x86/build' into x86/asm, to fix up conflicts

Conflicts:
arch/x86/entry/syscalls/Makefile

Signed-off-by: Ingo Molnar <mingo@kernel.org>

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.

For non */uapi/* files that summary was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139

and resulted in the first patch in this series.

If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930

and resulted in the second patch in this series.

- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:

SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1

and that resulted in the third patch in this series.

- when the two scanners agreed on the detected license(s), that became
the concluded license(s).

- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.

- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).

- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.

- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct

This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

x86/build: Beautify build log of syscall headers

This makes the build log look nicer.

Before:
SYSTBL arch/x86/entry/syscalls/../../include/generated/asm/syscalls_32.h
S

x86/build: Beautify build log of syscall headers

This makes the build log look nicer.

Before:
SYSTBL arch/x86/entry/syscalls/../../include/generated/asm/syscalls_32.h
SYSHDR arch/x86/entry/syscalls/../../include/generated/asm/unistd_32_ia32.h
SYSHDR arch/x86/entry/syscalls/../../include/generated/asm/unistd_64_x32.h
SYSTBL arch/x86/entry/syscalls/../../include/generated/asm/syscalls_64.h
SYSHDR arch/x86/entry/syscalls/../../include/generated/uapi/asm/unistd_32.h
SYSHDR arch/x86/entry/syscalls/../../include/generated/uapi/asm/unistd_64.h
SYSHDR arch/x86/entry/syscalls/../../include/generated/uapi/asm/unistd_x32.h

After:
SYSTBL arch/x86/include/generated/asm/syscalls_32.h
SYSHDR arch/x86/include/generated/asm/unistd_32_ia32.h
SYSHDR arch/x86/include/generated/asm/unistd_64_x32.h
SYSTBL arch/x86/include/generated/asm/syscalls_64.h
SYSHDR arch/x86/include/generated/uapi/asm/unistd_32.h
SYSHDR arch/x86/include/generated/uapi/asm/unistd_64.h
SYSHDR arch/x86/include/generated/uapi/asm/unistd_x32.h

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: linux-kbuild@vger.kernel.org
Link: http://lkml.kernel.org/r/1509077470-2735-1-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

show more ...

x86/asm/entry: Move the arch/x86/syscalls/ definitions to arch/x86/entry/syscalls/

The build time generated syscall definitions are entry code related, move
them into the arch/x86/entry/

x86/asm/entry: Move the arch/x86/syscalls/ definitions to arch/x86/entry/syscalls/

The build time generated syscall definitions are entry code related, move
them into the arch/x86/entry/ directory.

Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>

show more ...