x86/efistub: Use 1:1 file:memory mapping for PE/COFF .compat section

commit 1ad55cecf22f05f1c884adf63cc09d3c3e609ebf upstream.

The .compat section is a dummy PE section that contains the address of

x86/efistub: Use 1:1 file:memory mapping for PE/COFF .compat section

commit 1ad55cecf22f05f1c884adf63cc09d3c3e609ebf upstream.

The .compat section is a dummy PE section that contains the address of
the 32-bit entrypoint of the 64-bit kernel image if it is bootable from
32-bit firmware (i.e., CONFIG_EFI_MIXED=y)

This section is only 8 bytes in size and is only referenced from the
loader, and so it is placed at the end of the memory view of the image,
to avoid the need for padding it to 4k, which is required for sections
appearing in the middle of the image.

Unfortunately, this violates the PE/COFF spec, and even if most EFI
loaders will work correctly (including the Tianocore reference
implementation), PE loaders do exist that reject such images, on the
basis that both the file and memory views of the file contents should be
described by the section headers in a monotonically increasing manner
without leaving any gaps.

So reorganize the sections to avoid this issue. This results in a slight
padding overhead (< 4k) which can be avoided if desired by disabling
CONFIG_EFI_MIXED (which is only needed in rare cases these days)

Fixes: 3e3eabe26dc8 ("x86/boot: Increase section and file alignment to 4k/512")
Reported-by: Mike Beaton <mjsbeaton@gmail.com>
Link: https://lkml.kernel.org/r/CAHzAAWQ6srV6LVNdmfbJhOwhBw5ZzxxZZ07aHt9oKkfYAdvuQQ%40mail.gmail.com
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

x86/boot: Increase section and file alignment to 4k/512

commit 3e3eabe26dc88692d34cf76ca0e0dd331481cc15 upstream.

Align x86 with other EFI architectures, and increase the section
alignment to the E

x86/boot: Increase section and file alignment to 4k/512

commit 3e3eabe26dc88692d34cf76ca0e0dd331481cc15 upstream.

Align x86 with other EFI architectures, and increase the section
alignment to the EFI page size (4k), so that firmware is able to honour
the section permission attributes and map code read-only and data
non-executable.

There are a number of requirements that have to be taken into account:
- the sign tools get cranky when there are gaps between sections in the
file view of the image
- the virtual offset of each section must be aligned to the image's
section alignment
- the file offset *and size* of each section must be aligned to the
image's file alignment
- the image size must be aligned to the section alignment
- each section's virtual offset must be greater than or equal to the
size of the headers.

In order to meet all these requirements, while avoiding the need for
lots of padding to accommodate the .compat section, the latter is placed
at an arbitrary offset towards the end of the image, but aligned to the
minimum file alignment (512 bytes). The space before the .text section
is therefore distributed between the PE header, the .setup section and
the .compat section, leaving no gaps in the file coverage, making the
signing tools happy.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230915171623.655440-18-ardb@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

x86/boot: Split off PE/COFF .data section

commit 34951f3c28bdf6481d949a20413b2ce7693687b2 upstream.

Describe the code and data of the decompressor binary using separate
.text and .data PE/COFF sect

x86/boot: Split off PE/COFF .data section

commit 34951f3c28bdf6481d949a20413b2ce7693687b2 upstream.

Describe the code and data of the decompressor binary using separate
.text and .data PE/COFF sections, so that we will be able to map them
using restricted permissions once we increase the section and file
alignment sufficiently. This avoids the need for memory mappings that
are writable and executable at the same time, which is something that
is best avoided for security reasons.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230915171623.655440-17-ardb@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

x86/boot: Drop PE/COFF .reloc section

commit fa5750521e0a4efbc1af05223da9c4bbd6c21c83 upstream.

Ancient buggy EFI loaders may have required a .reloc section to be
present at some point in time, but

x86/boot: Drop PE/COFF .reloc section

commit fa5750521e0a4efbc1af05223da9c4bbd6c21c83 upstream.

Ancient buggy EFI loaders may have required a .reloc section to be
present at some point in time, but this has not been true for a long
time so the .reloc section can just be dropped.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230915171623.655440-16-ardb@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

x86/boot: Construct PE/COFF .text section from assembler

commit efa089e63b56bdc5eca754b995cb039dd7a5457e upstream.

Now that the size of the setup block is visible to the assembler, it is
possible t

x86/boot: Construct PE/COFF .text section from assembler

commit efa089e63b56bdc5eca754b995cb039dd7a5457e upstream.

Now that the size of the setup block is visible to the assembler, it is
possible to populate the PE/COFF header fields from the asm code
directly, instead of poking the values into the binary using the build
tool. This will make it easier to reorganize the section layout without
having to tweak the build tool in lockstep.

This change has no impact on the resulting bzImage binary.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230915171623.655440-15-ardb@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

x86/boot: Derive file size from _edata symbol

commit aeb92067f6ae994b541d7f9752fe54ed3d108bcc upstream.

Tweak the linker script so that the value of _edata represents the
decompressor binary's file

x86/boot: Derive file size from _edata symbol

commit aeb92067f6ae994b541d7f9752fe54ed3d108bcc upstream.

Tweak the linker script so that the value of _edata represents the
decompressor binary's file size rounded up to the appropriate alignment.
This removes the need to calculate it in the build tool, and will make
it easier to refer to the file size from the header directly in
subsequent changes to the PE header layout.

While adding _edata to the sed regex that parses the compressed
vmlinux's symbol list, tweak the regex a bit for conciseness.

This change has no impact on the resulting bzImage binary when
configured with CONFIG_EFI_STUB=y.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230915171623.655440-14-ardb@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

x86/boot: Define setup size in linker script

commit 093ab258e3fb1d1d3afdfd4a69403d44ce90e360 upstream.

The setup block contains the real mode startup code that is used when
booting from a legacy BI

x86/boot: Define setup size in linker script

commit 093ab258e3fb1d1d3afdfd4a69403d44ce90e360 upstream.

The setup block contains the real mode startup code that is used when
booting from a legacy BIOS, along with the boot_params/setup_data that
is used by legacy x86 bootloaders to pass the command line and initial
ramdisk parameters, among other things.

The setup block also contains the PE/COFF header of the entire combined
image, which includes the compressed kernel image, the decompressor and
the EFI stub.

This PE header describes the layout of the executable image in memory,
and currently, the fact that the setup block precedes it makes it rather
fiddly to get the right values into the right place in the final image.

Let's make things a bit easier by defining the setup_size in the linker
script so it can be referenced from the asm code directly, rather than
having to rely on the build tool to calculate it. For the time being,
add 64 bytes of fixed padding for the .reloc and .compat sections - this
will be removed in a subsequent patch after the PE/COFF header has been
reorganized.

This change has no impact on the resulting bzImage binary when
configured with CONFIG_EFI_MIXED=y.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230915171623.655440-13-ardb@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

x86/boot: Set EFI handover offset directly in header asm

commit eac956345f99dda3d68f4ae6cf7b494105e54780 upstream.

The offsets of the EFI handover entrypoints are available to the
assembler when co

x86/boot: Set EFI handover offset directly in header asm

commit eac956345f99dda3d68f4ae6cf7b494105e54780 upstream.

The offsets of the EFI handover entrypoints are available to the
assembler when constructing the header, so there is no need to set them
from the build tool afterwards.

This change has no impact on the resulting bzImage binary.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230915171623.655440-12-ardb@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

x86/boot: Grab kernel_info offset from zoffset header directly

commit 2e765c02dcbfc2a8a4527c621a84b9502f6b9bd2 upstream.

Instead of parsing zoffset.h and poking the kernel_info offset value
into th

x86/boot: Grab kernel_info offset from zoffset header directly

commit 2e765c02dcbfc2a8a4527c621a84b9502f6b9bd2 upstream.

Instead of parsing zoffset.h and poking the kernel_info offset value
into the header from the build tool, just grab the value directly in the
asm file that describes this header.

This change has no impact on the resulting bzImage binary.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230915171623.655440-11-ardb@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

x86/boot: Drop redundant code setting the root device

commit 7448e8e5d15a3c4df649bf6d6d460f78396f7e1e upstream.

The root device defaults to 0,0 and is no longer configurable at build
time [0], so t

x86/boot: Drop redundant code setting the root device

commit 7448e8e5d15a3c4df649bf6d6d460f78396f7e1e upstream.

The root device defaults to 0,0 and is no longer configurable at build
time [0], so there is no need for the build tool to ever write to this
field.

[0] 079f85e624189292 ("x86, build: Do not set the root_dev field in bzImage")

This change has no impact on the resulting bzImage binary.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230912090051.4014114-23-ardb@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

x86/boot: Omit compression buffer from PE/COFF image memory footprint

commit 8eace5b3555606e684739bef5bcdfcfe68235257 upstream.

Now that the EFI stub decompresses the kernel and hands over to the
d

x86/boot: Omit compression buffer from PE/COFF image memory footprint

commit 8eace5b3555606e684739bef5bcdfcfe68235257 upstream.

Now that the EFI stub decompresses the kernel and hands over to the
decompressed image directly, there is no longer a need to provide a
decompression buffer as part of the .BSS allocation of the PE/COFF
image. It also means the PE/COFF image can be loaded anywhere in memory,
and setting the preferred image base is unnecessary. So drop the
handling of this from the header and from the build tool.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230912090051.4014114-22-ardb@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

x86/boot: Remove the 'bugger off' message

commit 768171d7ebbce005210e1cf8456f043304805c15 upstream.

Ancient (pre-2003) x86 kernels could boot from a floppy disk straight from
the BIOS, using a smal

x86/boot: Remove the 'bugger off' message

commit 768171d7ebbce005210e1cf8456f043304805c15 upstream.

Ancient (pre-2003) x86 kernels could boot from a floppy disk straight from
the BIOS, using a small real mode boot stub at the start of the image
where the BIOS would expect the boot record (or boot block) to appear.

Due to its limitations (kernel size < 1 MiB, no support for IDE, USB or
El Torito floppy emulation), this support was dropped, and a Linux aware
bootloader is now always required to boot the kernel from a legacy BIOS.

To smoothen this transition, the boot stub was not removed entirely, but
replaced with one that just prints an error message telling the user to
install a bootloader.

As it is unlikely that anyone doing direct floppy boot with such an
ancient kernel is going to upgrade to v6.5+ and expect that this boot
method still works, printing this message is kind of pointless, and so
it should be possible to remove the logic that emits it.

Let's free up this space so it can be used to expand the PE header in a
subsequent patch.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Link: https://lore.kernel.org/r/20230912090051.4014114-21-ardb@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

x86/efi: Drop alignment flags from PE section headers

commit bfab35f552ab3dd6d017165bf9de1d1d20f198cc upstream.

The section header flags for alignment are documented in the PE/COFF
spec as being ap

x86/efi: Drop alignment flags from PE section headers

commit bfab35f552ab3dd6d017165bf9de1d1d20f198cc upstream.

The section header flags for alignment are documented in the PE/COFF
spec as being applicable to PE object files only, not to PE executables
such as the Linux bzImage, so let's drop them from the PE header.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230912090051.4014114-20-ardb@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

docs: move x86 documentation into Documentation/arch/

Move the x86 documentation under Documentation/arch/ as a way of cleaning
up the top-level directory and making the structure of our docs more
c

docs: move x86 documentation into Documentation/arch/

Move the x86 documentation under Documentation/arch/ as a way of cleaning
up the top-level directory and making the structure of our docs more
closely match the structure of the source directories it describes.

All in-kernel references to the old paths have been updated.

Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: linux-arch@vger.kernel.org
Cc: x86@kernel.org
Cc: Borislav Petkov <bp@alien8.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/lkml/20230315211523.108836-1-corbet@lwn.net/
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

show more ...

efi: Put Linux specific magic number in the DOS header

GRUB currently relies on the magic number in the image header of ARM and
arm64 EFI kernel images to decide whether or not the image in question

efi: Put Linux specific magic number in the DOS header

GRUB currently relies on the magic number in the image header of ARM and
arm64 EFI kernel images to decide whether or not the image in question
is a bootable kernel.

However, the purpose of the magic number is to identify the image as one
that implements the bare metal boot protocol, and so GRUB, which only
does EFI boot, is limited unnecessarily to booting images that could
potentially be booted in a non-EFI manner as well.

This is problematic for the new zboot decompressor image format, as it
can only boot in EFI mode, and must therefore not use the bare metal
boot magic number in its header.

For this reason, the strict magic number was dropped from GRUB, to
permit essentially any kind of EFI executable to be booted via the
'linux' command, blurring the line between the linux loader and the
chainloader.

So let's use the same field in the DOS header that RISC-V and arm64
already use for their 'bare metal' magic numbers to store a 'generic
Linux kernel' magic number, which can be used to identify bootable
kernel images in PE format which don't necessarily implement a bare
metal boot protocol in the same binary. Note that, in the context of
EFI, the MS-DOS header is only described in terms of the fields that it
shares with the hybrid PE/COFF image format, (i.e., the MS-DOS EXE magic
number at offset #0 and the PE header offset at byte offset #0x3c).
Since we aim for compatibility with EFI only, and not with MS-DOS or
MS-Windows, we can use the remaining space in the MS-DOS header however
we want.

Let's set the generic magic number for x86 images as well: existing
bootloaders already have their own methods to identify x86 Linux images
that can be booted in a non-EFI manner, and having the magic number in
place there will ease any future transitions in loader implementations
to merge the x86 and non-x86 EFI boot paths.

Note that 32-bit ARM already uses the same location in the header for a
different purpose, but the ARM support is already widely implemented and
the EFI zboot decompressor is not available on ARM anyway, so we just
disregard it here.

Acked-by: Leif Lindholm <quic_llindhol@quicinc.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

show more ...

x86/efi: Make the deprecated EFI handover protocol optional

The EFI handover protocol permits a bootloader to invoke the kernel as a
EFI PE/COFF application, while passing a bootparams struct as a t

x86/efi: Make the deprecated EFI handover protocol optional

The EFI handover protocol permits a bootloader to invoke the kernel as a
EFI PE/COFF application, while passing a bootparams struct as a third
argument to the entrypoint function call.

This has no basis in the UEFI specification, and there are better ways
to pass additional data to a UEFI application (UEFI configuration
tables, UEFI variables, UEFI protocols) than going around the
StartImage() boot service and jumping to a fixed offset in the loaded
image, just to call a different function that takes a third parameter.

The reason for handling struct bootparams in the bootloader was that the
EFI stub could only load initrd images from the EFI system partition,
and so passing it via struct bootparams was needed for loaders like
GRUB, which pass the initrd in memory, and may load it from anywhere,
including from the network. Another motivation was EFI mixed mode, which
could not use the initrd loader in the EFI stub at all due to 32/64 bit
incompatibilities (which will be fixed shortly [0]), and could not
invoke the ordinary PE/COFF entry point either, for the same reasons.

Given that loaders such as GRUB already carried the bootparams handling
in order to implement non-EFI boot, retaining that code and just passing
bootparams to the EFI stub was a reasonable choice (although defining an
alternate entrypoint could have been avoided.) However, the GRUB side
changes never made it upstream, and are only shipped by some of the
distros in their downstream versions.

In the meantime, EFI support has been added to other Linux architecture
ports, as well as to U-boot and systemd, including arch-agnostic methods
for passing initrd images in memory [1], and for doing mixed mode boot
[2], none of them requiring anything like the EFI handover protocol. So
given that only out-of-tree distro GRUB relies on this, let's permit it
to be omitted from the build, in preparation for retiring it completely
at a later date. (Note that systemd-boot does have an implementation as
well, but only uses it as a fallback for booting images that do not
implement the LoadFile2 based initrd loading method, i.e., v5.8 or older)

[0] https://lore.kernel.org/all/20220927085842.2860715-1-ardb@kernel.org/
[1] ec93fc371f01 ("efi/libstub: Add support for loading the initrd from a device path")
[2] 97aa276579b2 ("efi/x86: Add true mixed mode entry point into .compat section")

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20221122161017.2426828-18-ardb@kernel.org

show more ...

efi: x86: Fix config name for setting the NX-compatibility flag in the PE header

Commit 21b68da7bf4a ("efi: x86: Set the NX-compatibility flag in the PE
header") intends to set the compatibility fla

efi: x86: Fix config name for setting the NX-compatibility flag in the PE header

Commit 21b68da7bf4a ("efi: x86: Set the NX-compatibility flag in the PE
header") intends to set the compatibility flag, i.e.,
IMAGE_DLL_CHARACTERISTICS_NX_COMPAT, but this ifdef is actually dead as
the CONFIG_DXE_MEM_ATTRIBUTES Kconfig option does not exist.

The config is actually called EFI_DXE_MEM_ATTRIBUTES. Adjust the ifdef
to use the intended config name.

The issue was identified with ./scripts/checkkconfigsymbols.py.

Fixes: 21b68da7bf4a ("efi: x86: Set the NX-compatibility flag in the PE header")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20220601115043.7678-1-lukas.bulwahn@gmail.com
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

show more ...

efi: x86: Set the NX-compatibility flag in the PE header

Following Baskov Evgeniy's "Handle UEFI NX-restricted page tables"
patches, it's safe to set this compatibility flag to let loaders know
they

efi: x86: Set the NX-compatibility flag in the PE header

Following Baskov Evgeniy's "Handle UEFI NX-restricted page tables"
patches, it's safe to set this compatibility flag to let loaders know
they don't need to make special accommodations for kernel to load if
pre-boot NX is enabled.

Signed-off-by: Peter Jones <pjones@redhat.com>
Link: https://lore.kernel.org/all/20220329184743.798513-1-pjones@redhat.com/
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

show more ...

x86: Bump ZO_z_extra_bytes margin for zstd

Bump the ZO_z_extra_bytes margin for zstd.

Zstd needs 3 bytes per 128 KB, and has a 22 byte fixed overhead.
Zstd needs to maintain 128 KB of space at all

x86: Bump ZO_z_extra_bytes margin for zstd

Bump the ZO_z_extra_bytes margin for zstd.

Zstd needs 3 bytes per 128 KB, and has a 22 byte fixed overhead.
Zstd needs to maintain 128 KB of space at all times, since that is
the maximum block size. See the comments regarding in-place
decompression added in lib/decompress_unzstd.c for details.

The existing code is written so that all the compression algorithms use
the same ZO_z_extra_bytes. It is taken to be the maximum of the growth
rate plus the maximum fixed overhead. The comments just above this diff
state that:

Signed-off-by: Nick Terrell <terrelln@fb.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20200730190841.2071656-6-nickrterrell@gmail.com

show more ...

efi/x86: Add kernel preferred address to PE header

Store the kernel's link address as ImageBase in the PE header. Note that
the PE specification requires the ImageBase to be 64k aligned. The
preferr

efi/x86: Add kernel preferred address to PE header

Store the kernel's link address as ImageBase in the PE header. Note that
the PE specification requires the ImageBase to be 64k aligned. The
preferred address should almost always satisfy that, except for 32-bit
kernel if the configuration has been customized.

Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200303221205.4048668-4-nivedita@alum.mit.edu
Link: https://lore.kernel.org/r/20200308080859.21568-18-ardb@kernel.org

show more ...

efi/libstub: Introduce symbolic constants for the stub major/minor version

Now that we have added new ways to load the initrd or the mixed mode
kernel, we will also need a way to tell the loader abo

efi/libstub: Introduce symbolic constants for the stub major/minor version

Now that we have added new ways to load the initrd or the mixed mode
kernel, we will also need a way to tell the loader about this. Add
symbolic constants for the PE/COFF major/minor version numbers (which
fortunately have always been 0x0 for all architectures), so that we
can bump them later to document the capabilities of the stub.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

show more ...

efi/x86: Use symbolic constants in PE header instead of bare numbers

Replace bare numbers in the PE/COFF header structure with symbolic
constants so they become self documenting.

Signed-off-by: Ard

efi/x86: Use symbolic constants in PE header instead of bare numbers

Replace bare numbers in the PE/COFF header structure with symbolic
constants so they become self documenting.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

show more ...

efi/x86: Add true mixed mode entry point into .compat section

Currently, mixed mode is closely tied to the EFI handover protocol
and relies on intimate knowledge of the bootparams structure, setup
h

efi/x86: Add true mixed mode entry point into .compat section

Currently, mixed mode is closely tied to the EFI handover protocol
and relies on intimate knowledge of the bootparams structure, setup
header etc, all of which are rather byzantine and entirely specific
to x86.

Even though no other EFI supported architectures are currently known
that could support something like mixed mode, it still makes sense to
abstract a bit from this, and make it part of a generic Linux on EFI
boot protocol.

To that end, add a .compat section to the mixed mode binary, and populate
it with the PE machine type and entry point address, allowing firmware
implementations to match it to their native machine type, and invoke
non-native binaries using a secondary entry point.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

show more ...

efi/x86: Drop redundant .bss section

In commit

c7fb93ec51d462ec ("x86/efi: Include a .bss section within the PE/COFF headers")

we added a separate .bss section to the PE/COFF header of the compr

efi/x86: Drop redundant .bss section

In commit

c7fb93ec51d462ec ("x86/efi: Include a .bss section within the PE/COFF headers")

we added a separate .bss section to the PE/COFF header of the compressed
kernel describing the static memory footprint of the decompressor, to
ensure that it has enough headroom to decompress itself.

We can achieve the exact same result by increasing the virtual size of
the .text section, without changing the raw size, which, as per the
PE/COFF specification, requires the loader to zero initialize the delta.

Doing so frees up a slot in the section table, which we will use later
to describe the mixed mode entrypoint.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

show more ...

x86/boot: Introduce setup_indirect

The setup_data is a bit awkward to use for extremely large data objects,
both because the setup_data header has to be adjacent to the data object
and because it ha

x86/boot: Introduce setup_indirect

The setup_data is a bit awkward to use for extremely large data objects,
both because the setup_data header has to be adjacent to the data object
and because it has a 32-bit length field. However, it is important that
intermediate stages of the boot process have a way to identify which
chunks of memory are occupied by kernel data. Thus introduce an uniform
way to specify such indirect data as setup_indirect struct and
SETUP_INDIRECT type.

And finally bump setup_header version in arch/x86/boot/header.S.

Suggested-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Ross Philipson <ross.philipson@oracle.com>
Reviewed-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: ard.biesheuvel@linaro.org
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: dave.hansen@linux.intel.com
Cc: eric.snowberg@oracle.com
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Juergen Gross <jgross@suse.com>
Cc: kanth.ghatraju@oracle.com
Cc: linux-doc@vger.kernel.org
Cc: linux-efi <linux-efi@vger.kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: rdunlap@infradead.org
Cc: ross.philipson@oracle.com
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Cc: xen-devel@lists.xenproject.org
Link: https://lkml.kernel.org/r/20191112134640.16035-4-daniel.kiper@oracle.com

show more ...