Revision tags: v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45, v6.1.44, v6.1.43, v6.1.42, v6.1.41, v6.1.40, v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35, v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22, v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70, v5.15.69, v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62, v5.15.61, v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56 |
|
#
4dc5a328 |
| 20-Jul-2022 |
Xin Gao <gaoxin@cdjrlc.com> |
um: Do not initialise statics to 0.
do not initialise statics to 0.
Signed-off-by: Xin Gao <gaoxin@cdjrlc.com> Signed-off-by: Richard Weinberger <richard@nod.at>
|
Revision tags: v5.15.55, v5.15.54, v5.15.53, v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48, v5.15.47, v5.15.46, v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38 |
|
#
d5a9597d |
| 06-May-2022 |
Johannes Berg <johannes.berg@intel.com> |
um: line: Use separate IRQs per line
Today, all possible serial lines (ssl*=) as well as all possible consoles (con*=) each share a single interrupt (with a fixed number) with others of the same typ
um: line: Use separate IRQs per line
Today, all possible serial lines (ssl*=) as well as all possible consoles (con*=) each share a single interrupt (with a fixed number) with others of the same type.
Now, if you have two lines, say ssl0 and ssl1, and one of them is connected to an fd you cannot read (e.g. a file), but the other gets a read interrupt, then both of them get the interrupt since it's shared. Then, the read() call will return EOF, since it's a file being written and there's nothing to read (at least not at the current offset, at the end).
Unfortunately, this is treated as a read error, and we close this line, losing all the possible output.
It might be possible to work around this and make the IRQ sharing work, however, now that we have dynamically allocated IRQs that are easy to use, simply use that to achieve separating between the events; then there's no interrupt for that line and we never attempt the read in the first place, thus not closing the line.
This manifested itself in the wifi hostap/hwsim tests where the parallel script communicates via one serial console and the kernel messages go to another (a file) and sending data on the communication console caused the kernel messages to stop flowing into the file.
Reported-by: Jouni Malinen <j@w1.fi> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-By: anton ivanov <anton.ivanov@cambridgegreys.com> Signed-off-by: Richard Weinberger <richard@nod.at>
show more ...
|
#
5877390d |
| 06-May-2022 |
Johannes Berg <johannes.berg@intel.com> |
um: line: Use separate IRQs per line
[ Upstream commit d5a9597d6916a76663085db984cb8fe97f0a5c56 ]
Today, all possible serial lines (ssl*=) as well as all possible consoles (con*=) each share a sing
um: line: Use separate IRQs per line
[ Upstream commit d5a9597d6916a76663085db984cb8fe97f0a5c56 ]
Today, all possible serial lines (ssl*=) as well as all possible consoles (con*=) each share a single interrupt (with a fixed number) with others of the same type.
Now, if you have two lines, say ssl0 and ssl1, and one of them is connected to an fd you cannot read (e.g. a file), but the other gets a read interrupt, then both of them get the interrupt since it's shared. Then, the read() call will return EOF, since it's a file being written and there's nothing to read (at least not at the current offset, at the end).
Unfortunately, this is treated as a read error, and we close this line, losing all the possible output.
It might be possible to work around this and make the IRQ sharing work, however, now that we have dynamically allocated IRQs that are easy to use, simply use that to achieve separating between the events; then there's no interrupt for that line and we never attempt the read in the first place, thus not closing the line.
This manifested itself in the wifi hostap/hwsim tests where the parallel script communicates via one serial console and the kernel messages go to another (a file) and sending data on the communication console caused the kernel messages to stop flowing into the file.
Reported-by: Jouni Malinen <j@w1.fi> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-By: anton ivanov <anton.ivanov@cambridgegreys.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Sasha Levin <sashal@kernel.org>
show more ...
|
#
5877390d |
| 06-May-2022 |
Johannes Berg <johannes.berg@intel.com> |
um: line: Use separate IRQs per line
[ Upstream commit d5a9597d6916a76663085db984cb8fe97f0a5c56 ]
Today, all possible serial lines (ssl*=) as well as all possible consoles (con*=) each share a sing
um: line: Use separate IRQs per line
[ Upstream commit d5a9597d6916a76663085db984cb8fe97f0a5c56 ]
Today, all possible serial lines (ssl*=) as well as all possible consoles (con*=) each share a single interrupt (with a fixed number) with others of the same type.
Now, if you have two lines, say ssl0 and ssl1, and one of them is connected to an fd you cannot read (e.g. a file), but the other gets a read interrupt, then both of them get the interrupt since it's shared. Then, the read() call will return EOF, since it's a file being written and there's nothing to read (at least not at the current offset, at the end).
Unfortunately, this is treated as a read error, and we close this line, losing all the possible output.
It might be possible to work around this and make the IRQ sharing work, however, now that we have dynamically allocated IRQs that are easy to use, simply use that to achieve separating between the events; then there's no interrupt for that line and we never attempt the read in the first place, thus not closing the line.
This manifested itself in the wifi hostap/hwsim tests where the parallel script communicates via one serial console and the kernel messages go to another (a file) and sending data on the communication console caused the kernel messages to stop flowing into the file.
Reported-by: Jouni Malinen <j@w1.fi> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-By: anton ivanov <anton.ivanov@cambridgegreys.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Sasha Levin <sashal@kernel.org>
show more ...
|
Revision tags: v5.15.37, v5.15.36, v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.16, v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35 |
|
#
4da872be |
| 05-May-2021 |
Jiri Slaby <jslaby@suse.cz> |
tty: remove empty tty_operations::set_termios
tty_operations::set_termios is optional. If it doesn't exist, nothing is called. So remove almost¹ empty set_termios implementations.
¹ capi had an use
tty: remove empty tty_operations::set_termios
tty_operations::set_termios is optional. If it doesn't exist, nothing is called. So remove almost¹ empty set_termios implementations.
¹ capi had an useless pr_debug in it.
Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Karsten Keil <isdn@linux-pingi.de> Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com> Link: https://lore.kernel.org/r/20210505091928.22010-32-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47 |
|
#
96564ac6 |
| 15-Jun-2020 |
Jiri Slaby <jslaby@suse.cz> |
um: line, remove put_char
um's put_char only calls write. And the tty layer/disciplines do the same if put_char is NULL.
So we can safely remove this put_char wrapper.
Signed-off-by: Jiri Slaby <j
um: line, remove put_char
um's put_char only calls write. And the tty layer/disciplines do the same if put_char is NULL.
So we can safely remove this put_char wrapper.
Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Link: https://lore.kernel.org/r/20200615074856.18949-1-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4, v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10 |
|
#
dbddf429 |
| 25-Aug-2019 |
Alex Dewar <alex.dewar@gmx.co.uk> |
um: Add SPDX headers for files in arch/um/drivers
Convert files to use SPDX header. All files are licensed under the GPLv2.
Signed-off-by: Alex Dewar <alex.dewar@gmx.co.uk> Signed-off-by: Richard W
um: Add SPDX headers for files in arch/um/drivers
Convert files to use SPDX header. All files are licensed under the GPLv2.
Signed-off-by: Alex Dewar <alex.dewar@gmx.co.uk> Signed-off-by: Richard Weinberger <richard@nod.at>
show more ...
|
Revision tags: v5.2.9, v5.2.8, v5.2.7, v5.2.6, v5.2.5, v5.2.4, v5.2.3, v5.2.2, v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8, v5.1.7, v5.1.6, v5.1.5, v5.1.4, v5.1.3, v5.1.2, v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11, v5.0.10, v5.0.9, v5.0.8, v5.0.7, v5.0.6, v5.0.5, v5.0.4, v5.0.3, v4.19.29, v5.0.2, v4.19.28, v5.0.1, v4.19.27, v5.0, v4.19.26, v4.19.25, v4.19.24, v4.19.23, v4.19.22, v4.19.21, v4.19.20, v4.19.19, v4.19.18, v4.19.17, v4.19.16, v4.19.15, v4.19.14, v4.19.13, v4.19.12, v4.19.11, v4.19.10, v4.19.9, v4.19.8, v4.19.7, v4.19.6, v4.19.5, v4.19.4, v4.18.20, v4.19.3, v4.18.19, v4.19.2, v4.18.18, v4.18.17, v4.19.1, v4.19, v4.18.16, v4.18.15, v4.18.14, v4.18.13, v4.18.12, v4.18.11, v4.18.10, v4.18.9, v4.18.7, v4.18.6, v4.18.5, v4.17.18, v4.18.4, v4.18.3, v4.17.17, v4.18.2, v4.17.16, v4.17.15, v4.18.1, v4.18, v4.17.14, v4.17.13, v4.17.12, v4.17.11, v4.17.10, v4.17.9, v4.17.8, v4.17.7, v4.17.6, v4.17.5, v4.17.4, v4.17.3, v4.17.2, v4.17.1, v4.17, v4.16, v4.15, v4.13.16, v4.14, v4.13.5, v4.13, v4.12, v4.10.17 |
|
#
745a600c |
| 17-May-2017 |
Masami Hiramatsu <mhiramat@kernel.org> |
um: console: Ignore console= option
Ignore linux kernel's console= option at uml's console option handler. Since uml's con= option is only for setting up new console, and Linux kernel's console= opt
um: console: Ignore console= option
Ignore linux kernel's console= option at uml's console option handler. Since uml's con= option is only for setting up new console, and Linux kernel's console= option specify to which console kernel output its message, we can use both option for different purpose.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Richard Weinberger <richard@nod.at>
show more ...
|
Revision tags: v4.10.16, v4.10.15, v4.10.14, v4.10.13, v4.10.12, v4.10.11, v4.10.10, v4.10.9, v4.10.8, v4.10.7, v4.10.6, v4.10.5, v4.10.4, v4.10.3, v4.10.2, v4.10.1, v4.10, v4.9, openbmc-4.4-20161121-1, v4.4.33, v4.4.32, v4.4.31, v4.4.30, v4.4.29, v4.4.28, v4.4.27, v4.7.10, openbmc-4.4-20161021-1, v4.7.9, v4.4.26, v4.7.8, v4.4.25, v4.4.24, v4.7.7, v4.8, v4.4.23, v4.7.6, v4.7.5, v4.4.22, v4.4.21, v4.7.4, v4.7.3, v4.4.20, v4.7.2, v4.4.19, openbmc-4.4-20160819-1, v4.7.1, v4.4.18, v4.4.17, openbmc-4.4-20160804-1, v4.4.16, v4.7, openbmc-4.4-20160722-1, openbmc-20160722-1, openbmc-20160713-1, v4.4.15, v4.6.4, v4.6.3, v4.4.14, v4.6.2, v4.4.13, openbmc-20160606-1, v4.6.1, v4.4.12, openbmc-20160521-1, v4.4.11, openbmc-20160518-1, v4.6, v4.4.10, openbmc-20160511-1, openbmc-20160505-1, v4.4.9, v4.4.8, v4.4.7, openbmc-20160329-2, openbmc-20160329-1, openbmc-20160321-1, v4.4.6, v4.5, v4.4.5, v4.4.4, v4.4.3, openbmc-20160222-1, v4.4.2, openbmc-20160212-1, openbmc-20160210-1, openbmc-20160202-2, openbmc-20160202-1, v4.4.1, openbmc-20160127-1, openbmc-20160120-1, v4.4, openbmc-20151217-1, openbmc-20151210-1, openbmc-20151202-1, openbmc-20151123-1, openbmc-20151118-1, openbmc-20151104-1, v4.3, openbmc-20151102-1, openbmc-20151028-1, v4.3-rc1, v4.2, v4.2-rc8, v4.2-rc7, v4.2-rc6, v4.2-rc5, v4.2-rc4, v4.2-rc3, v4.2-rc2, v4.2-rc1, v4.1, v4.1-rc8, v4.1-rc7, v4.1-rc6, v4.1-rc5, v4.1-rc4, v4.1-rc3, v4.1-rc2, v4.1-rc1, v4.0, v4.0-rc7, v4.0-rc6, v4.0-rc5, v4.0-rc4, v4.0-rc3, v4.0-rc2, v4.0-rc1, v3.19, v3.19-rc7, v3.19-rc6, v3.19-rc5, v3.19-rc4, v3.19-rc3, v3.19-rc2, v3.19-rc1, v3.18, v3.18-rc7, v3.18-rc6, v3.18-rc5, v3.18-rc4, v3.18-rc3, v3.18-rc2, v3.18-rc1, v3.17, v3.17-rc7, v3.17-rc6, v3.17-rc5, v3.17-rc4, v3.17-rc3, v3.17-rc2, v3.17-rc1, v3.16, v3.16-rc7, v3.16-rc6, v3.16-rc5, v3.16-rc4, v3.16-rc3, v3.16-rc2, v3.16-rc1, v3.15, v3.15-rc8, v3.15-rc7, v3.15-rc6, v3.15-rc5, v3.15-rc4, v3.15-rc3, v3.15-rc2, v3.15-rc1, v3.14, v3.14-rc8, v3.14-rc7, v3.14-rc6, v3.14-rc5, v3.14-rc4, v3.14-rc3, v3.14-rc2, v3.14-rc1, v3.13, v3.13-rc8, v3.13-rc7, v3.13-rc6, v3.13-rc5, v3.13-rc4, v3.13-rc3, v3.13-rc2, v3.13-rc1, v3.12, v3.12-rc7, v3.12-rc6, v3.12-rc5, v3.12-rc4, v3.12-rc3, v3.12-rc2, v3.12-rc1, v3.11, v3.11-rc7, v3.11-rc6, v3.11-rc5, v3.11-rc4, v3.11-rc3, v3.11-rc2, v3.11-rc1, v3.10, v3.10-rc7, v3.10-rc6, v3.10-rc5, v3.10-rc4, v3.10-rc3, v3.10-rc2, v3.10-rc1, v3.9, v3.9-rc8, v3.9-rc7, v3.9-rc6, v3.9-rc5, v3.9-rc4, v3.9-rc3 |
|
#
cc4f0248 |
| 11-Mar-2013 |
Richard Weinberger <richard@nod.at> |
um: Use tty_port_operations->destruct
As we setup the SIGWINCH handler in tty_port_operations->activate it makes sense to tear down it in ->destruct.
Signed-off-by: Richard Weinberger <richard@nod.
um: Use tty_port_operations->destruct
As we setup the SIGWINCH handler in tty_port_operations->activate it makes sense to tear down it in ->destruct.
Signed-off-by: Richard Weinberger <richard@nod.at>
show more ...
|
Revision tags: v3.9-rc2, v3.9-rc1, v3.8, v3.8-rc7, v3.8-rc6, v3.8-rc5, v3.8-rc4, v3.8-rc3, v3.8-rc2, v3.8-rc1, v3.7, v3.7-rc8, v3.7-rc7, v3.7-rc6, v3.7-rc5, v3.7-rc4, v3.7-rc3, v3.7-rc2, v3.7-rc1 |
|
#
37185b33 |
| 07-Oct-2012 |
Al Viro <viro@ZenIV.linux.org.uk> |
um: get rid of pointless include "..." where include <...> will do
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Richard Weinberger <richard@nod.at>
|
Revision tags: v3.6, v3.6-rc7, v3.6-rc6, v3.6-rc5, v3.6-rc4, v3.6-rc3, v3.6-rc2, v3.6-rc1, v3.5, v3.5-rc7, v3.5-rc6, v3.5-rc5, v3.5-rc4, v3.5-rc3, v3.5-rc2 |
|
#
79e0273d |
| 04-Jun-2012 |
Richard Weinberger <richard@nod.at> |
um: fully use tty_port
... use all tty_port helpers
Signed-off-by: Richard Weinberger <richard@nod.at>
|
#
d003e982 |
| 04-Jun-2012 |
Richard Weinberger <richard@nod.at> |
um: remove line_ioctl()
line_ioctl() has no real function.
Signed-off-by: Richard Weinberger <richard@nod.at>
|
Revision tags: v3.5-rc1, v3.4, v3.4-rc7, v3.4-rc6, v3.4-rc5, v3.4-rc4, v3.4-rc3, v3.4-rc2, v3.4-rc1, v3.3, v3.3-rc7, v3.3-rc6, v3.3-rc5, v3.3-rc4, v3.3-rc3, v3.3-rc2, v3.3-rc1, v3.2, v3.2-rc7, v3.2-rc6, v3.2-rc5, v3.2-rc4, v3.2-rc3, v3.2-rc2, v3.2-rc1, v3.1, v3.1-rc10, v3.1-rc9, v3.1-rc8, v3.1-rc7, v3.1-rc6 |
|
#
bed5e39c |
| 08-Sep-2011 |
Al Viro <viro@zeniv.linux.org.uk> |
um: switch users of ->chan_list to ->chan_{in,out} (easy cases)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Richard Weinberger <richard@nod.at>
|
#
04292b2c |
| 09-Sep-2011 |
Al Viro <viro@zeniv.linux.org.uk> |
um: get rid of lines_init()
move config-independent parts of initialization into register_lines(), call setup_one_line() after it instead of abusing ->init_str.
Signed-off-by: Al Viro <viro@zeniv.l
um: get rid of lines_init()
move config-independent parts of initialization into register_lines(), call setup_one_line() after it instead of abusing ->init_str.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Richard Weinberger <richard@nod.at>
show more ...
|
#
cfe6b7c7 |
| 09-Sep-2011 |
Al Viro <viro@zeniv.linux.org.uk> |
um: switch line.c tty drivers to dynamic device creation
Current code doesn't update the symlinks in /sys/dev/char when we add/remove tty lines. Fixing that allows to stop messing with ->valid befo
um: switch line.c tty drivers to dynamic device creation
Current code doesn't update the symlinks in /sys/dev/char when we add/remove tty lines. Fixing that allows to stop messing with ->valid before the driver registration, which is a Good Thing(tm) - we shouldn't have it set before we really have the things set up and ready for line_open().
We need tty_driver available to call tty_{un,}register_device(), so we just stash a reference to it into struct line_driver.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Richard Weinberger <richard@nod.at>
show more ...
|
#
d8c215ad |
| 09-Sep-2011 |
Al Viro <viro@zeniv.linux.org.uk> |
um: convert count_lock to mutex, fix a race in line_open()
If two processes are opening the same line, the second to get into line_open() will decide that it doesn't need to do anything (correctly)
um: convert count_lock to mutex, fix a race in line_open()
If two processes are opening the same line, the second to get into line_open() will decide that it doesn't need to do anything (correctly) or wait for anything. The latter, unfortunately, is incorrect - the first opener might not be through yet. We need to have exclusion covering the entire line_init(), including the blocking parts. Moreover, the next patch will need to widen the exclusion on mconsole side of things, also including the blocking bits, so let's just convert that sucker to mutex...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Richard Weinberger <richard@nod.at>
show more ...
|
#
43574c1a |
| 09-Sep-2011 |
Al Viro <viro@zeniv.linux.org.uk> |
um: get rid of the init_prio mess
make line_setup() act on a separate array of conf strings + default conf, have lines array initialized explicitly by that data, bury LINE_INIT() macro from hell.
S
um: get rid of the init_prio mess
make line_setup() act on a separate array of conf strings + default conf, have lines array initialized explicitly by that data, bury LINE_INIT() macro from hell.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Richard Weinberger <richard@nod.at>
show more ...
|
Revision tags: v3.1-rc5, v3.1-rc4, v3.1-rc3 |
|
#
510c72a3 |
| 18-Aug-2011 |
Al Viro <viro@ftp.linux.org.uk> |
um: take chan_*.h and line.h to arch/um/drivers
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Richard Weinberger <richard@nod.at>
|
Revision tags: v3.1-rc2, v3.1-rc1, v3.0, v3.0-rc7, v3.0-rc6, v3.0-rc5, v3.0-rc4, v3.0-rc3, v3.0-rc2, v3.0-rc1, v2.6.39, v2.6.39-rc7, v2.6.39-rc6, v2.6.39-rc5, v2.6.39-rc4, v2.6.39-rc3, v2.6.39-rc2, v2.6.39-rc1, v2.6.38, v2.6.38-rc8, v2.6.38-rc7, v2.6.38-rc6, v2.6.38-rc5, v2.6.38-rc4, v2.6.38-rc3, v2.6.38-rc2, v2.6.38-rc1, v2.6.37, v2.6.37-rc8, v2.6.37-rc7, v2.6.37-rc6, v2.6.37-rc5, v2.6.37-rc4, v2.6.37-rc3, v2.6.37-rc2, v2.6.37-rc1, v2.6.36, v2.6.36-rc8, v2.6.36-rc7, v2.6.36-rc6, v2.6.36-rc5, v2.6.36-rc4, v2.6.36-rc3, v2.6.36-rc2, v2.6.36-rc1, v2.6.35, v2.6.35-rc6, v2.6.35-rc5, v2.6.35-rc4, v2.6.35-rc3, v2.6.35-rc2, v2.6.35-rc1, v2.6.34, v2.6.34-rc7, v2.6.34-rc6, v2.6.34-rc5, v2.6.34-rc4, v2.6.34-rc3, v2.6.34-rc2, v2.6.34-rc1, v2.6.33, v2.6.33-rc8, v2.6.33-rc7, v2.6.33-rc6, v2.6.33-rc5, v2.6.33-rc4, v2.6.33-rc3, v2.6.33-rc2, v2.6.33-rc1, v2.6.32, v2.6.32-rc8, v2.6.32-rc7, v2.6.32-rc6, v2.6.32-rc5, v2.6.32-rc4, v2.6.32-rc3, v2.6.32-rc1, v2.6.32-rc2, v2.6.31, v2.6.31-rc9, v2.6.31-rc8, v2.6.31-rc7, v2.6.31-rc6, v2.6.31-rc5, v2.6.31-rc4, v2.6.31-rc3, v2.6.31-rc2, v2.6.31-rc1, v2.6.30, v2.6.30-rc8, v2.6.30-rc7, v2.6.30-rc6, v2.6.30-rc5, v2.6.30-rc4, v2.6.30-rc3, v2.6.30-rc2, v2.6.30-rc1, v2.6.29, v2.6.29-rc8, v2.6.29-rc7, v2.6.29-rc6, v2.6.29-rc5, v2.6.29-rc4, v2.6.29-rc3, v2.6.29-rc2, v2.6.29-rc1, v2.6.28, v2.6.28-rc9, v2.6.28-rc8, v2.6.28-rc7, v2.6.28-rc6, v2.6.28-rc5, v2.6.28-rc4, v2.6.28-rc3, v2.6.28-rc2, v2.6.28-rc1, v2.6.27, v2.6.27-rc9, v2.6.27-rc8, v2.6.27-rc7, v2.6.27-rc6, v2.6.27-rc5, v2.6.27-rc4, v2.6.27-rc3, v2.6.27-rc2, v2.6.27-rc1, v2.6.26, v2.6.26-rc9, v2.6.26-rc8, v2.6.26-rc7, v2.6.26-rc6, v2.6.26-rc5, v2.6.26-rc4, v2.6.26-rc3, v2.6.26-rc2, v2.6.26-rc1 |
|
#
074a0db8 |
| 28-Apr-2008 |
WANG Cong <xiyou.wangcong@gmail.com> |
uml: make several things static
Make several things static, because they no longer need to be global.
Acked-by: Jeff Dike <jdike@addtoit.com> Signed-off-by: WANG Cong <wangcong@zeuux.org> Signed-of
uml: make several things static
Make several things static, because they no longer need to be global.
Acked-by: Jeff Dike <jdike@addtoit.com> Signed-off-by: WANG Cong <wangcong@zeuux.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
show more ...
|
Revision tags: v2.6.25, v2.6.25-rc9, v2.6.25-rc8, v2.6.25-rc7, v2.6.25-rc6, v2.6.25-rc5, v2.6.25-rc4, v2.6.25-rc3, v2.6.25-rc2, v2.6.25-rc1 |
|
#
edea1385 |
| 05-Feb-2008 |
Jeff Dike <jdike@addtoit.com> |
uml: tidy kern_util.h
Tidy kern_util.h. It turns out that most of the function declarations aren't used, so they can go away. os.h no longer includes kern_util.h, so files which got it through os.
uml: tidy kern_util.h
Tidy kern_util.h. It turns out that most of the function declarations aren't used, so they can go away. os.h no longer includes kern_util.h, so files which got it through os.h now need to include it directly. A number of other files never needed it, so these includes are deleted.
The structure which was used to pass signal handlers from the kernel side to the userspace side is gone. Instead, the handlers are declared here, and used directly from libc code. This allows arch/um/os-Linux/trap.c to be deleted, with its remnants being moved to arch/um/os-Linux/skas/trap.c.
arch/um/os-Linux/tty.c had its inclusions changed, and it needed some style attention, so it got tidied.
Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
show more ...
|
Revision tags: v2.6.24, v2.6.24-rc8, v2.6.24-rc7, v2.6.24-rc6, v2.6.24-rc5, v2.6.24-rc4, v2.6.24-rc3, v2.6.24-rc2, v2.6.24-rc1, v2.6.23, v2.6.23-rc9, v2.6.23-rc8, v2.6.23-rc7, v2.6.23-rc6, v2.6.23-rc5, v2.6.23-rc4, v2.6.23-rc3, v2.6.23-rc2, v2.6.23-rc1 |
|
#
d14ad81f |
| 16-Jul-2007 |
Jeff Dike <jdike@addtoit.com> |
uml: handle errors on opening host side of consoles
If the host side of a console can't be opened, this will now produce visible error messages.
enable_chan now returns a status and this is passed
uml: handle errors on opening host side of consoles
If the host side of a console can't be opened, this will now produce visible error messages.
enable_chan now returns a status and this is passed up to con_open and ssl_open, which will complain if anything went wrong.
The default host device for the serial line driver is now a pts device rather than a pty device since lots of hosts have LEGACY_PTYS disabled. This had always been failing on such hosts, but silently.
Signed-off-by: Jeff Dike <jdike@linux.intel.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
show more ...
|
#
63920f47 |
| 16-Jul-2007 |
Jeff Dike <jdike@addtoit.com> |
uml: xterm driver tidying
Major tidying of the xterm console driver: got rid of the tt-mode gdb support tidied up the includes fixed lots of style violations replaced os_* calls with glibc calls
uml: xterm driver tidying
Major tidying of the xterm console driver: got rid of the tt-mode gdb support tidied up the includes fixed lots of style violations replaced os_* calls with glibc calls in xterm.c all printk calls now have a severity indicator the error paths of xterm_open are closer to being right
Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
show more ...
|
Revision tags: v2.6.22, v2.6.22-rc7, v2.6.22-rc6, v2.6.22-rc5, v2.6.22-rc4, v2.6.22-rc3, v2.6.22-rc2, v2.6.22-rc1 |
|
#
57ac895a |
| 06-May-2007 |
Davide Brini <davide.brini@unibo.it> |
uml: fix umid in xterm titles
Calls lines_init() *after* xterm_title is modified to include umid.
Signed-off-by: Davide Brini <davide.brini@unibo.it> Signed-off-by: Jeff Dike <jdike@linux.intel.com
uml: fix umid in xterm titles
Calls lines_init() *after* xterm_title is modified to include umid.
Signed-off-by: Davide Brini <davide.brini@unibo.it> Signed-off-by: Jeff Dike <jdike@linux.intel.com> Acked-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
show more ...
|
#
9218b171 |
| 06-May-2007 |
Jeff Dike <jdike@addtoit.com> |
uml: remove user_util.h
user_util.h isn't needed any more, so delete it and remove all includes of it.
Signed-off-by: Jeff Dike <jdike@linux.intel.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorbl
uml: remove user_util.h
user_util.h isn't needed any more, so delete it and remove all includes of it.
Signed-off-by: Jeff Dike <jdike@linux.intel.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
show more ...
|
Revision tags: v2.6.21, v2.6.21-rc7, v2.6.21-rc6, v2.6.21-rc5, v2.6.21-rc4 |
|
#
b5337885 |
| 07-Mar-2007 |
Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> |
[PATCH] um: mark both consoles as CON_ANYTIME
Since both UML consoles do not use percpu variables, they may be called when the cpu is still offline, and they may be marked CON_ANYTIME (this is docum
[PATCH] um: mark both consoles as CON_ANYTIME
Since both UML consoles do not use percpu variables, they may be called when the cpu is still offline, and they may be marked CON_ANYTIME (this is documented in kernel/printk.c, grep for CON_ANYTIME to find mentions of this).
Works well in testing done with lock debug enabled, should be safe but is not needed for next release.
This would probably help also stderr_console.c, but this is yet to test.
Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Acked-by: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
show more ...
|