Revision tags: v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4, v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7, v5.2.6, v5.2.5, v5.2.4, v5.2.3, v5.2.2, v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8, v5.1.7, v5.1.6, v5.1.5, v5.1.4, v5.1.3, v5.1.2, v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11, v5.0.10, v5.0.9, v5.0.8, v5.0.7, v5.0.6, v5.0.5, v5.0.4, v5.0.3, v4.19.29, v5.0.2, v4.19.28, v5.0.1, v4.19.27, v5.0, v4.19.26, v4.19.25, v4.19.24, v4.19.23, v4.19.22, v4.19.21, v4.19.20, v4.19.19, v4.19.18, v4.19.17, v4.19.16, v4.19.15, v4.19.14, v4.19.13 |
|
#
add5ca2c |
| 28-Dec-2018 |
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> |
sh: sh4a: convert to SPDX identifiers
Update license to use SPDX-License-Identifier instead of verbose license text.
Link: http://lkml.kernel.org/r/878t14csxy.wl-kuninori.morimoto.gx@renesas.com Si
sh: sh4a: convert to SPDX identifiers
Update license to use SPDX-License-Identifier instead of verbose license text.
Link: http://lkml.kernel.org/r/878t14csxy.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Cc: Rich Felker <dalias@libc.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
show more ...
|
Revision tags: v4.19.12, v4.19.11, v4.19.10, v4.19.9, v4.19.8, v4.19.7, v4.19.6, v4.19.5, v4.19.4, v4.18.20, v4.19.3, v4.18.19, v4.19.2, v4.18.18, v4.18.17, v4.19.1, v4.19, v4.18.16, v4.18.15, v4.18.14, v4.18.13, v4.18.12, v4.18.11, v4.18.10, v4.18.9, v4.18.7, v4.18.6, v4.18.5, v4.17.18, v4.18.4, v4.18.3, v4.17.17, v4.18.2, v4.17.16, v4.17.15, v4.18.1, v4.18, v4.17.14, v4.17.13, v4.17.12, v4.17.11, v4.17.10, v4.17.9, v4.17.8, v4.17.7, v4.17.6, v4.17.5, v4.17.4, v4.17.3, v4.17.2, v4.17.1, v4.17, v4.16, v4.15, v4.13.16, v4.14, v4.13.5, v4.13, v4.12, v4.10.17, v4.10.16, v4.10.15, v4.10.14, v4.10.13, v4.10.12, v4.10.11, v4.10.10, v4.10.9, v4.10.8, v4.10.7, v4.10.6, v4.10.5, v4.10.4, v4.10.3, v4.10.2, v4.10.1, v4.10, v4.9, openbmc-4.4-20161121-1, v4.4.33, v4.4.32, v4.4.31, v4.4.30, v4.4.29, v4.4.28, v4.4.27, v4.7.10, openbmc-4.4-20161021-1, v4.7.9, v4.4.26, v4.7.8, v4.4.25, v4.4.24, v4.7.7, v4.8, v4.4.23, v4.7.6, v4.7.5, v4.4.22, v4.4.21, v4.7.4, v4.7.3, v4.4.20, v4.7.2, v4.4.19, openbmc-4.4-20160819-1, v4.7.1, v4.4.18, v4.4.17, openbmc-4.4-20160804-1, v4.4.16, v4.7, openbmc-4.4-20160722-1, openbmc-20160722-1, openbmc-20160713-1, v4.4.15, v4.6.4, v4.6.3, v4.4.14, v4.6.2, v4.4.13, openbmc-20160606-1, v4.6.1, v4.4.12, openbmc-20160521-1, v4.4.11, openbmc-20160518-1, v4.6, v4.4.10, openbmc-20160511-1, openbmc-20160505-1, v4.4.9, v4.4.8, v4.4.7, openbmc-20160329-2, openbmc-20160329-1, openbmc-20160321-1, v4.4.6, v4.5, v4.4.5, v4.4.4, v4.4.3, openbmc-20160222-1, v4.4.2, openbmc-20160212-1, openbmc-20160210-1, openbmc-20160202-2, openbmc-20160202-1, v4.4.1, openbmc-20160127-1, openbmc-20160120-1, v4.4, openbmc-20151217-1, openbmc-20151210-1, openbmc-20151202-1, openbmc-20151123-1, openbmc-20151118-1, openbmc-20151104-1, v4.3, openbmc-20151102-1, openbmc-20151028-1 |
|
#
fa3d39bf |
| 14-Sep-2015 |
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> |
sh: Rename sci_ick and sci_fck clock to fck
The SCI driver requires a functional clock named "fck" and falls back to "sci_ick" or "sci_fck" when the "fck" clock doesn't exist. To allow removal of th
sh: Rename sci_ick and sci_fck clock to fck
The SCI driver requires a functional clock named "fck" and falls back to "sci_ick" or "sci_fck" when the "fck" clock doesn't exist. To allow removal of the fallback code rename the sci_ick and sci_fck clocks to fck for all SH platforms.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
show more ...
|
Revision tags: v4.3-rc1, v4.2, v4.2-rc8, v4.2-rc7, v4.2-rc6, v4.2-rc5, v4.2-rc4, v4.2-rc3, v4.2-rc2, v4.2-rc1, v4.1, v4.1-rc8, v4.1-rc7, v4.1-rc6, v4.1-rc5, v4.1-rc4, v4.1-rc3, v4.1-rc2, v4.1-rc1, v4.0, v4.0-rc7, v4.0-rc6, v4.0-rc5, v4.0-rc4, v4.0-rc3, v4.0-rc2 |
|
#
8a7711fc |
| 01-Mar-2015 |
Russell King <rmk+kernel@arm.linux.org.uk> |
SH: use clkdev_add_table()
We have always had an efficient way of registering a table of clock lookups - it's called clkdev_add_table(). However, some people seem to really love writing inefficient
SH: use clkdev_add_table()
We have always had an efficient way of registering a table of clock lookups - it's called clkdev_add_table(). However, some people seem to really love writing inefficient and unnecessary code.
Convert SH to use the correct interface.
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
show more ...
|
Revision tags: v4.0-rc1, v3.19, v3.19-rc7, v3.19-rc6, v3.19-rc5, v3.19-rc4, v3.19-rc3, v3.19-rc2, v3.19-rc1, v3.18, v3.18-rc7, v3.18-rc6, v3.18-rc5, v3.18-rc4, v3.18-rc3, v3.18-rc2, v3.18-rc1, v3.17, v3.17-rc7, v3.17-rc6, v3.17-rc5, v3.17-rc4, v3.17-rc3, v3.17-rc2, v3.17-rc1, v3.16, v3.16-rc7, v3.16-rc6, v3.16-rc5, v3.16-rc4, v3.16-rc3, v3.16-rc2, v3.16-rc1, v3.15, v3.15-rc8, v3.15-rc7, v3.15-rc6, v3.15-rc5, v3.15-rc4, v3.15-rc3 |
|
#
1399c195 |
| 23-Apr-2014 |
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> |
sh: Switch to new style TMU device
The TMU (Timer Unit) driver implements a new style of platform data that handles the timer as a single device with multiple channel. Switch from the old-style plat
sh: Switch to new style TMU device
The TMU (Timer Unit) driver implements a new style of platform data that handles the timer as a single device with multiple channel. Switch from the old-style platform data to the new-style platform data.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
show more ...
|
Revision tags: v3.15-rc2, v3.15-rc1, v3.14, v3.14-rc8, v3.14-rc7, v3.14-rc6, v3.14-rc5, v3.14-rc4, v3.14-rc3, v3.14-rc2, v3.14-rc1, v3.13, v3.13-rc8, v3.13-rc7, v3.13-rc6, v3.13-rc5, v3.13-rc4, v3.13-rc3, v3.13-rc2, v3.13-rc1, v3.12, v3.12-rc7, v3.12-rc6, v3.12-rc5, v3.12-rc4, v3.12-rc3, v3.12-rc2, v3.12-rc1, v3.11, v3.11-rc7, v3.11-rc6, v3.11-rc5, v3.11-rc4, v3.11-rc3, v3.11-rc2, v3.11-rc1, v3.10, v3.10-rc7, v3.10-rc6, v3.10-rc5, v3.10-rc4, v3.10-rc3, v3.10-rc2, v3.10-rc1, v3.9, v3.9-rc8, v3.9-rc7, v3.9-rc6, v3.9-rc5, v3.9-rc4, v3.9-rc3, v3.9-rc2, v3.9-rc1, v3.8, v3.8-rc7, v3.8-rc6, v3.8-rc5, v3.8-rc4, v3.8-rc3, v3.8-rc2, v3.8-rc1, v3.7, v3.7-rc8, v3.7-rc7, v3.7-rc6, v3.7-rc5, v3.7-rc4, v3.7-rc3, v3.7-rc2, v3.7-rc1, v3.6, v3.6-rc7, v3.6-rc6, v3.6-rc5, v3.6-rc4, v3.6-rc3, v3.6-rc2, v3.6-rc1, v3.5, v3.5-rc7, v3.5-rc6, v3.5-rc5 |
|
#
ad3337cb |
| 26-Jun-2012 |
Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> |
sh: Convert sh_clk_mstp32_register to sh_clk_mstp_register
sh_clk_mstp32_register is deprecated. This convert to sh_clk_mstp_register.
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas
sh: Convert sh_clk_mstp32_register to sh_clk_mstp_register
sh_clk_mstp32_register is deprecated. This convert to sh_clk_mstp_register.
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
show more ...
|
Revision tags: v3.5-rc4, v3.5-rc3, v3.5-rc2, v3.5-rc1, v3.4, v3.4-rc7, v3.4-rc6, v3.4-rc5, v3.4-rc4, v3.4-rc3, v3.4-rc2, v3.4-rc1, v3.3, v3.3-rc7, v3.3-rc6 |
|
#
33cb61a4 |
| 29-Feb-2012 |
Magnus Damm <damm@opensource.se> |
sh: sh4a sh_clk_ops rename
Convert sh4a SoCs to use sh_clk_ops.
Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
|
Revision tags: v3.3-rc5, v3.3-rc4, v3.3-rc3, v3.3-rc2, v3.3-rc1, v3.2, v3.2-rc7, v3.2-rc6, v3.2-rc5, v3.2-rc4, v3.2-rc3, v3.2-rc2, v3.2-rc1, v3.1, v3.1-rc10, v3.1-rc9, v3.1-rc8, v3.1-rc7, v3.1-rc6, v3.1-rc5, v3.1-rc4, v3.1-rc3, v3.1-rc2, v3.1-rc1, v3.0, v3.0-rc7 |
|
#
1522043b |
| 05-Jul-2011 |
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> |
sh: move CLKDEV_xxx_ID macro to sh_clk.h
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
|
#
4857c70d |
| 05-Jul-2011 |
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> |
sh: clock-shx3: add CLKDEV_ICK_ID for cleanup
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
|
Revision tags: v3.0-rc6, v3.0-rc5, v3.0-rc4, v3.0-rc3, v3.0-rc2, v3.0-rc1, v2.6.39, v2.6.39-rc7, v2.6.39-rc6, v2.6.39-rc5, v2.6.39-rc4, v2.6.39-rc3, v2.6.39-rc2, v2.6.39-rc1, v2.6.38, v2.6.38-rc8, v2.6.38-rc7, v2.6.38-rc6, v2.6.38-rc5, v2.6.38-rc4, v2.6.38-rc3, v2.6.38-rc2, v2.6.38-rc1, v2.6.37, v2.6.37-rc8, v2.6.37-rc7, v2.6.37-rc6, v2.6.37-rc5, v2.6.37-rc4, v2.6.37-rc3 |
|
#
6d803ba7 |
| 17-Nov-2010 |
Jean-Christop PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
ARM: 6483/1: arm & sh: factorised duplicated clkdev.c
factorise some generic infrastructure to assist looking up struct clks for the ARM & SH architecture.
as the code is identical at 99%
put the
ARM: 6483/1: arm & sh: factorised duplicated clkdev.c
factorise some generic infrastructure to assist looking up struct clks for the ARM & SH architecture.
as the code is identical at 99%
put the arch specific code for allocation as example in asm/clkdev.h
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
show more ...
|
Revision tags: v2.6.37-rc2, v2.6.37-rc1, v2.6.36, v2.6.36-rc8, v2.6.36-rc7 |
|
#
5924ad0d |
| 01-Oct-2010 |
Paul Mundt <lethal@linux-sh.org> |
sh: Update SH-X3 subtype for clkdev lookups.
Rewrite the SH-X3 proto CPU clock framework for clkdev.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
|
Revision tags: v2.6.36-rc6, v2.6.36-rc5, v2.6.36-rc4, v2.6.36-rc3, v2.6.36-rc2, v2.6.36-rc1, v2.6.35, v2.6.35-rc6, v2.6.35-rc5, v2.6.35-rc4, v2.6.35-rc3, v2.6.35-rc2, v2.6.35-rc1, v2.6.34 |
|
#
38803d76 |
| 11-May-2010 |
Magnus Damm <damm@opensource.se> |
sh: switch shx3 to clkdev
This patch converts the remaining shx3 clocks to use clkdev for lookup. The now unused name and id from struct clk are also removed.
Signed-off-by: Magnus Damm <damm@opens
sh: switch shx3 to clkdev
This patch converts the remaining shx3 clocks to use clkdev for lookup. The now unused name and id from struct clk are also removed.
Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
show more ...
|
Revision tags: v2.6.34-rc7, v2.6.34-rc6, v2.6.34-rc5, v2.6.34-rc4, v2.6.34-rc3, v2.6.34-rc2, v2.6.34-rc1, v2.6.33, v2.6.33-rc8, v2.6.33-rc7, v2.6.33-rc6 |
|
#
9d56dd3b |
| 25-Jan-2010 |
Paul Mundt <lethal@linux-sh.org> |
sh: Mass ctrl_in/outX to __raw_read/writeX conversion.
The old ctrl in/out routines are non-portable and unsuitable for cross-platform use. While drivers/sh has already been sanitized, there is stil
sh: Mass ctrl_in/outX to __raw_read/writeX conversion.
The old ctrl in/out routines are non-portable and unsuitable for cross-platform use. While drivers/sh has already been sanitized, there is still quite a lot of code that is not. This converts the arch/sh/ bits over, which permits us to flag the routines as deprecated whilst still building with -Werror for the architecture code, and to ensure that future users are not added.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
show more ...
|
Revision tags: v2.6.33-rc5, v2.6.33-rc4, v2.6.33-rc3, v2.6.33-rc2, v2.6.33-rc1, v2.6.32, v2.6.32-rc8, v2.6.32-rc7, v2.6.32-rc6, v2.6.32-rc5, v2.6.32-rc4, v2.6.32-rc3, v2.6.32-rc1, v2.6.32-rc2, v2.6.31, v2.6.31-rc9, v2.6.31-rc8, v2.6.31-rc7, v2.6.31-rc6, v2.6.31-rc5, v2.6.31-rc4, v2.6.31-rc3, v2.6.31-rc2, v2.6.31-rc1, v2.6.30, v2.6.30-rc8, v2.6.30-rc7, v2.6.30-rc6 |
|
#
253b0887 |
| 13-May-2009 |
Paul Mundt <lethal@linux-sh.org> |
sh: clkfwk: Rework legacy CPG clock handling.
This moves out the old legacy CPG clocks to their own file, and converts over the existing users. With these clocks going away and each CPU dealing with
sh: clkfwk: Rework legacy CPG clock handling.
This moves out the old legacy CPG clocks to their own file, and converts over the existing users. With these clocks going away and each CPU dealing with them on their own, CPUs can gradually move over to the new interface.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
show more ...
|
#
9fe5ee0e |
| 12-May-2009 |
Paul Mundt <lethal@linux-sh.org> |
sh: clkfwk: Use arch_clk_init() for on-chip clock registration.
CPUs registering on-chip clocks should be using arch_clk_init() with the new scheme so that the CPUs have the opportunity to establish
sh: clkfwk: Use arch_clk_init() for on-chip clock registration.
CPUs registering on-chip clocks should be using arch_clk_init() with the new scheme so that the CPUs have the opportunity to establish the topology prior to the initial root clock rate propagation. This ensures that CPUs with on-chip clocks that use CLK_ENABLE_ON_INIT are properly enabled at the initial propagation time, without having to further poke the root clocks.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
show more ...
|
#
f5c84cf5 |
| 11-May-2009 |
Paul Mundt <lethal@linux-sh.org> |
sh: clkfwk: Tidy up on-chip clock registration and rate propagation.
This tidies up the set_rate hack that the on-chip clocks were abusing to trigger rate propagation, which is now handled generical
sh: clkfwk: Tidy up on-chip clock registration and rate propagation.
This tidies up the set_rate hack that the on-chip clocks were abusing to trigger rate propagation, which is now handled generically.
Additionally, now that CLK_ENABLE_ON_INIT is wired up where it needs to be for these clocks, the clk_enable() can go away. In some cases this was bumping up the refcount higher than it should have been.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
show more ...
|
#
4ff29ff8 |
| 11-May-2009 |
Paul Mundt <lethal@linux-sh.org> |
sh: clkfwk: Consolidate the ALWAYS_ENABLED / NEEDS_INIT mess.
There is no real distinction here in behaviour, either a clock needs to be enabled on initialiation or not. The ALWAYS_ENABLED flag was
sh: clkfwk: Consolidate the ALWAYS_ENABLED / NEEDS_INIT mess.
There is no real distinction here in behaviour, either a clock needs to be enabled on initialiation or not. The ALWAYS_ENABLED flag was always intended to only apply to clocks that were physically always on and could simply not be disabled at all from software. Unfortunately over time this was abused and the meaning became a bit blurry.
So, we kill off both of all of those paths now, as well as the newer NEEDS_INIT flag, and consolidate on a CLK_ENABLE_ON_INIT. Clocks that need to be enabled on initialization can set this, and it will purposely enable them and bump the refcount up.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
show more ...
|
#
b68d8201 |
| 11-May-2009 |
Paul Mundt <lethal@linux-sh.org> |
sh: clkfwk: Make recalc return an unsigned long.
This is prep work for cleaning up some of the rate propagation bits. Trivial conversion.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
|
Revision tags: v2.6.30-rc5, v2.6.30-rc4, v2.6.30-rc3, v2.6.30-rc2, v2.6.30-rc1, v2.6.29, v2.6.29-rc8, v2.6.29-rc7, v2.6.29-rc6, v2.6.29-rc5, v2.6.29-rc4, v2.6.29-rc3, v2.6.29-rc2, v2.6.29-rc1, v2.6.28, v2.6.28-rc9, v2.6.28-rc8, v2.6.28-rc7, v2.6.28-rc6, v2.6.28-rc5, v2.6.28-rc4, v2.6.28-rc3, v2.6.28-rc2, v2.6.28-rc1, v2.6.27, v2.6.27-rc9, v2.6.27-rc8, v2.6.27-rc7, v2.6.27-rc6, v2.6.27-rc5, v2.6.27-rc4, v2.6.27-rc3, v2.6.27-rc2, v2.6.27-rc1, v2.6.26, v2.6.26-rc9, v2.6.26-rc8, v2.6.26-rc7, v2.6.26-rc6, v2.6.26-rc5, v2.6.26-rc4, v2.6.26-rc3, v2.6.26-rc2, v2.6.26-rc1, v2.6.25, v2.6.25-rc9, v2.6.25-rc8, v2.6.25-rc7, v2.6.25-rc6, v2.6.25-rc5, v2.6.25-rc4, v2.6.25-rc3, v2.6.25-rc2, v2.6.25-rc1, v2.6.24, v2.6.24-rc8, v2.6.24-rc7, v2.6.24-rc6, v2.6.24-rc5, v2.6.24-rc4, v2.6.24-rc3, v2.6.24-rc2, v2.6.24-rc1, v2.6.23, v2.6.23-rc9, v2.6.23-rc8, v2.6.23-rc7, v2.6.23-rc6, v2.6.23-rc5, v2.6.23-rc4, v2.6.23-rc3, v2.6.23-rc2, v2.6.23-rc1, v2.6.22, v2.6.22-rc7, v2.6.22-rc6 |
|
#
2b1bd1ac |
| 20-Jun-2007 |
Paul Mundt <lethal@linux-sh.org> |
sh: Preliminary support for the SH-X3 CPU.
This adds basic support for UP SH-X3.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
|
Revision tags: v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4, v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7, v5.2.6, v5.2.5, v5.2.4, v5.2.3, v5.2.2, v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8, v5.1.7, v5.1.6, v5.1.5, v5.1.4, v5.1.3, v5.1.2, v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11, v5.0.10, v5.0.9, v5.0.8, v5.0.7, v5.0.6, v5.0.5, v5.0.4, v5.0.3, v4.19.29, v5.0.2, v4.19.28, v5.0.1, v4.19.27, v5.0, v4.19.26, v4.19.25, v4.19.24, v4.19.23, v4.19.22, v4.19.21, v4.19.20, v4.19.19, v4.19.18, v4.19.17, v4.19.16, v4.19.15, v4.19.14, v4.19.13 |
|
#
add5ca2c |
| 28-Dec-2018 |
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> |
sh: sh4a: convert to SPDX identifiers Update license to use SPDX-License-Identifier instead of verbose license text. Link: http://lkml.kernel.org/r/878t14csxy.wl-kuninori.morimo
sh: sh4a: convert to SPDX identifiers Update license to use SPDX-License-Identifier instead of verbose license text. Link: http://lkml.kernel.org/r/878t14csxy.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Cc: Rich Felker <dalias@libc.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
show more ...
|
Revision tags: v4.19.12, v4.19.11, v4.19.10, v4.19.9, v4.19.8, v4.19.7, v4.19.6, v4.19.5, v4.19.4, v4.18.20, v4.19.3, v4.18.19, v4.19.2, v4.18.18, v4.18.17, v4.19.1, v4.19, v4.18.16, v4.18.15, v4.18.14, v4.18.13, v4.18.12, v4.18.11, v4.18.10, v4.18.9, v4.18.7, v4.18.6, v4.18.5, v4.17.18, v4.18.4, v4.18.3, v4.17.17, v4.18.2, v4.17.16, v4.17.15, v4.18.1, v4.18, v4.17.14, v4.17.13, v4.17.12, v4.17.11, v4.17.10, v4.17.9, v4.17.8, v4.17.7, v4.17.6, v4.17.5, v4.17.4, v4.17.3, v4.17.2, v4.17.1, v4.17, v4.16, v4.15, v4.13.16, v4.14, v4.13.5, v4.13, v4.12, v4.10.17, v4.10.16, v4.10.15, v4.10.14, v4.10.13, v4.10.12, v4.10.11, v4.10.10, v4.10.9, v4.10.8, v4.10.7, v4.10.6, v4.10.5, v4.10.4, v4.10.3, v4.10.2, v4.10.1, v4.10, v4.9, openbmc-4.4-20161121-1, v4.4.33, v4.4.32, v4.4.31, v4.4.30, v4.4.29, v4.4.28, v4.4.27, v4.7.10, openbmc-4.4-20161021-1, v4.7.9, v4.4.26, v4.7.8, v4.4.25, v4.4.24, v4.7.7, v4.8, v4.4.23, v4.7.6, v4.7.5, v4.4.22, v4.4.21, v4.7.4, v4.7.3, v4.4.20, v4.7.2, v4.4.19, openbmc-4.4-20160819-1, v4.7.1, v4.4.18, v4.4.17, openbmc-4.4-20160804-1, v4.4.16, v4.7, openbmc-4.4-20160722-1, openbmc-20160722-1, openbmc-20160713-1, v4.4.15, v4.6.4, v4.6.3, v4.4.14, v4.6.2, v4.4.13, openbmc-20160606-1, v4.6.1, v4.4.12, openbmc-20160521-1, v4.4.11, openbmc-20160518-1, v4.6, v4.4.10, openbmc-20160511-1, openbmc-20160505-1, v4.4.9, v4.4.8, v4.4.7, openbmc-20160329-2, openbmc-20160329-1, openbmc-20160321-1, v4.4.6, v4.5, v4.4.5, v4.4.4, v4.4.3, openbmc-20160222-1, v4.4.2, openbmc-20160212-1, openbmc-20160210-1, openbmc-20160202-2, openbmc-20160202-1, v4.4.1, openbmc-20160127-1, openbmc-20160120-1, v4.4, openbmc-20151217-1, openbmc-20151210-1, openbmc-20151202-1, openbmc-20151123-1, openbmc-20151118-1, openbmc-20151104-1, v4.3, openbmc-20151102-1, openbmc-20151028-1 |
|
#
fa3d39bf |
| 14-Sep-2015 |
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> |
sh: Rename sci_ick and sci_fck clock to fck The SCI driver requires a functional clock named "fck" and falls back to "sci_ick" or "sci_fck" when the "fck" clock doesn't exist. To allow
sh: Rename sci_ick and sci_fck clock to fck The SCI driver requires a functional clock named "fck" and falls back to "sci_ick" or "sci_fck" when the "fck" clock doesn't exist. To allow removal of the fallback code rename the sci_ick and sci_fck clocks to fck for all SH platforms. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
show more ...
|
Revision tags: v4.3-rc1, v4.2, v4.2-rc8, v4.2-rc7, v4.2-rc6, v4.2-rc5, v4.2-rc4, v4.2-rc3, v4.2-rc2, v4.2-rc1, v4.1, v4.1-rc8, v4.1-rc7, v4.1-rc6, v4.1-rc5, v4.1-rc4, v4.1-rc3, v4.1-rc2, v4.1-rc1, v4.0, v4.0-rc7, v4.0-rc6, v4.0-rc5, v4.0-rc4, v4.0-rc3, v4.0-rc2 |
|
#
8a7711fc |
| 01-Mar-2015 |
Russell King <rmk+kernel@arm.linux.org.uk> |
SH: use clkdev_add_table() We have always had an efficient way of registering a table of clock lookups - it's called clkdev_add_table(). However, some people seem to really love wri
SH: use clkdev_add_table() We have always had an efficient way of registering a table of clock lookups - it's called clkdev_add_table(). However, some people seem to really love writing inefficient and unnecessary code. Convert SH to use the correct interface. Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
show more ...
|
Revision tags: v4.0-rc1, v3.19, v3.19-rc7, v3.19-rc6, v3.19-rc5, v3.19-rc4, v3.19-rc3, v3.19-rc2, v3.19-rc1, v3.18, v3.18-rc7, v3.18-rc6, v3.18-rc5, v3.18-rc4, v3.18-rc3, v3.18-rc2, v3.18-rc1, v3.17, v3.17-rc7, v3.17-rc6, v3.17-rc5, v3.17-rc4, v3.17-rc3, v3.17-rc2, v3.17-rc1, v3.16, v3.16-rc7, v3.16-rc6, v3.16-rc5, v3.16-rc4, v3.16-rc3, v3.16-rc2, v3.16-rc1, v3.15, v3.15-rc8, v3.15-rc7, v3.15-rc6, v3.15-rc5, v3.15-rc4, v3.15-rc3 |
|
#
1399c195 |
| 23-Apr-2014 |
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> |
sh: Switch to new style TMU device The TMU (Timer Unit) driver implements a new style of platform data that handles the timer as a single device with multiple channel. Switch from th
sh: Switch to new style TMU device The TMU (Timer Unit) driver implements a new style of platform data that handles the timer as a single device with multiple channel. Switch from the old-style platform data to the new-style platform data. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
show more ...
|
Revision tags: v3.15-rc2, v3.15-rc1, v3.14, v3.14-rc8, v3.14-rc7, v3.14-rc6, v3.14-rc5, v3.14-rc4, v3.14-rc3, v3.14-rc2, v3.14-rc1, v3.13, v3.13-rc8, v3.13-rc7, v3.13-rc6, v3.13-rc5, v3.13-rc4, v3.13-rc3, v3.13-rc2, v3.13-rc1, v3.12, v3.12-rc7, v3.12-rc6, v3.12-rc5, v3.12-rc4, v3.12-rc3, v3.12-rc2, v3.12-rc1, v3.11, v3.11-rc7, v3.11-rc6, v3.11-rc5, v3.11-rc4, v3.11-rc3, v3.11-rc2, v3.11-rc1, v3.10, v3.10-rc7, v3.10-rc6, v3.10-rc5, v3.10-rc4, v3.10-rc3, v3.10-rc2, v3.10-rc1, v3.9, v3.9-rc8, v3.9-rc7, v3.9-rc6, v3.9-rc5, v3.9-rc4, v3.9-rc3, v3.9-rc2, v3.9-rc1, v3.8, v3.8-rc7, v3.8-rc6, v3.8-rc5, v3.8-rc4, v3.8-rc3, v3.8-rc2, v3.8-rc1, v3.7, v3.7-rc8, v3.7-rc7, v3.7-rc6, v3.7-rc5, v3.7-rc4, v3.7-rc3, v3.7-rc2, v3.7-rc1, v3.6, v3.6-rc7, v3.6-rc6, v3.6-rc5, v3.6-rc4, v3.6-rc3, v3.6-rc2, v3.6-rc1, v3.5, v3.5-rc7, v3.5-rc6, v3.5-rc5 |
|
#
ad3337cb |
| 26-Jun-2012 |
Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> |
sh: Convert sh_clk_mstp32_register to sh_clk_mstp_register sh_clk_mstp32_register is deprecated. This convert to sh_clk_mstp_register. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwa
sh: Convert sh_clk_mstp32_register to sh_clk_mstp_register sh_clk_mstp32_register is deprecated. This convert to sh_clk_mstp_register. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
show more ...
|
Revision tags: v3.5-rc4, v3.5-rc3, v3.5-rc2, v3.5-rc1, v3.4, v3.4-rc7, v3.4-rc6, v3.4-rc5, v3.4-rc4, v3.4-rc3, v3.4-rc2, v3.4-rc1, v3.3, v3.3-rc7, v3.3-rc6 |
|
#
33cb61a4 |
| 29-Feb-2012 |
Magnus Damm <damm@opensource.se> |
sh: sh4a sh_clk_ops rename Convert sh4a SoCs to use sh_clk_ops. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
|
Revision tags: v3.3-rc5, v3.3-rc4, v3.3-rc3, v3.3-rc2, v3.3-rc1, v3.2, v3.2-rc7, v3.2-rc6, v3.2-rc5, v3.2-rc4, v3.2-rc3, v3.2-rc2, v3.2-rc1, v3.1, v3.1-rc10, v3.1-rc9, v3.1-rc8, v3.1-rc7, v3.1-rc6, v3.1-rc5, v3.1-rc4, v3.1-rc3, v3.1-rc2, v3.1-rc1, v3.0, v3.0-rc7 |
|
#
1522043b |
| 05-Jul-2011 |
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> |
sh: move CLKDEV_xxx_ID macro to sh_clk.h Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
|