s390/pci: don't log availability events as errors

Availability events are logged in s390dbf in s390dbf/pci_error/hex_ascii
even though they don't indicate an error condition.

They have also become

s390/pci: don't log availability events as errors

Availability events are logged in s390dbf in s390dbf/pci_error/hex_ascii
even though they don't indicate an error condition.

They have also become redundant as commit 6526a597a2e85 ("s390/pci: add
simpler s390dbf traces for events") added an s390dbf/pci_msg/sprintf log
entry for availability events which contains all non reserved fields of
struct zpci_ccdf_avail. On the other hand the availability entries in
the error log make it easy to miss actual errors and may even overwrite
error entries if the message buffer wraps.

Thus simply remove the availability events from the error log thereby
establishing the rule that any content in s390dbf/pci_error indicates
some kind of error.

Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

show more ...

s390/pci: improve zpci_dev reference counting

Currently zpci_dev uses kref based reference counting but only accounts
for one original reference plus one reference from an added pci_dev to
its under

s390/pci: improve zpci_dev reference counting

Currently zpci_dev uses kref based reference counting but only accounts
for one original reference plus one reference from an added pci_dev to
its underlying zpci_dev. Counting just the original reference worked
until the pci_dev reference was added in commit 2a671f77ee49 ("s390/pci:
fix use after free of zpci_dev") because once a zpci_dev goes away, i.e.
enters the reserved state, it would immediately get released. However
with the pci_dev reference this is no longer the case and the zpci_dev
may still appear in multiple availability events indicating that it was
reserved. This was solved by detecting when the zpci_dev is already on
its way out but still hanging around. This has however shown some light
on how unusual our zpci_dev reference counting is.

Improve upon this by modelling zpci_dev reference counting on pci_dev.
Analogous to pci_get_slot() increment the reference count in
get_zdev_by_fid(). Thus all users of get_zdev_by_fid() must drop the
reference once they are done with the zpci_dev.

Similar to pci_scan_single_device(), zpci_create_device() returns the
device with an initial count of 1 and the device added to the zpci_list
(analogous to the PCI bus' device_list). In turn users of
zpci_create_device() must only drop the reference once the device is
gone from the point of view of the zPCI subsystem, it might still be
referenced by the common PCI subsystem though.

Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

show more ...

s390/pci: implement minimal PCI error recovery

When the platform detects an error on a PCI function or a service action
has been performed it is put in the error state and an error event
notificatio

s390/pci: implement minimal PCI error recovery

When the platform detects an error on a PCI function or a service action
has been performed it is put in the error state and an error event
notification is provided to the OS.

Currently we treat all error event notifications the same and simply set
pdev->error_state = pci_channel_io_perm_failure requiring user
intervention such as use of the recover attribute to get the device
usable again. Despite requiring a manual step this also has the
disadvantage that the device is completely torn down and recreated
resulting in higher level devices such as a block or network device
being recreated. In case of a block device this also means that it may
need to be removed and added to a software raid even if that could
otherwise survive with a temporary degradation.

This is of course not ideal more so since an error notification with PEC
0x3A indicates that the platform already performed error recovery
successfully or that the error state was caused by a service action that
is now finished.

At least in this case we can assume that the error state can be reset
and the function made usable again. So as not to have the disadvantage
of a full tear down and recreation we need to coordinate this recovery
with the driver. Thankfully there is already a well defined recovery
flow for this described in Documentation/PCI/pci-error-recovery.rst.

The implementation of this is somewhat straight forward and simplified
by the fact that our recovery flow is defined per PCI function. As
a reset we use the newly introduced zpci_hot_reset_device() which also
takes the PCI function out of the error state.

Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Acked-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

show more ...

s390/pci: refresh function handle in iomap

The function handle of a PCI function is updated when disabling or
enabling it as well as when the function's availability changes or it
enters the error s

s390/pci: refresh function handle in iomap

The function handle of a PCI function is updated when disabling or
enabling it as well as when the function's availability changes or it
enters the error state.

Until now this only occurred either while there is no struct pci_dev
associated with the function yet or the function became unavailable.
This meant that leaving a stale function handle in the iomap either
didn't happen because there was no iomap yet or it lead to errors on PCI
access but so would the correct disabled function handle.

In the future a CLP Set PCI Function Disable/Enable cycle during PCI
device recovery may be done while the device is bound to a driver. In
this case we must update the iomap associated with the now-stale
function handle to ensure that the resulting zPCI instruction references
an accurate function handle.

Since the function handle is accessed by the PCI accessor helpers
without locking use READ_ONCE()/WRITE_ONCE() to mark this access and
prevent compiler optimizations that would move the load/store.

With that infrastructure in place let's also properly update the
function handle in the existing cases. This makes sure that in the
future debugging of a zPCI function access through the handle will
show an up to date handle reducing the chance of confusion. Also it
makes sure we have one single place where a zPCI function handle is
updated after initialization.

Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

show more ...

s390/pci: add simpler s390dbf traces for events

We often need to figure out what operations were performed in response
to an error or availability event. The operations are easily accessible
in s390

s390/pci: add simpler s390dbf traces for events

We often need to figure out what operations were performed in response
to an error or availability event. The operations are easily accessible
in s390dbf/pci_msg but the events have to be correlated with these from
either the kernel log or s390dbf/pci_err. Improve this situation by
logging the most important data from error and availability events that
is the FID, PEC and FH together with the operations.

Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

show more ...

s390/pci: improve zpci_dev reference counting

[ Upstream commit c122383d221dfa2f41cfe5e672540595de986fde ]

Currently zpci_dev uses kref based reference counting but only accounts
for one original r

s390/pci: improve zpci_dev reference counting

[ Upstream commit c122383d221dfa2f41cfe5e672540595de986fde ]

Currently zpci_dev uses kref based reference counting but only accounts
for one original reference plus one reference from an added pci_dev to
its underlying zpci_dev. Counting just the original reference worked
until the pci_dev reference was added in commit 2a671f77ee49 ("s390/pci:
fix use after free of zpci_dev") because once a zpci_dev goes away, i.e.
enters the reserved state, it would immediately get released. However
with the pci_dev reference this is no longer the case and the zpci_dev
may still appear in multiple availability events indicating that it was
reserved. This was solved by detecting when the zpci_dev is already on
its way out but still hanging around. This has however shown some light
on how unusual our zpci_dev reference counting is.

Improve upon this by modelling zpci_dev reference counting on pci_dev.
Analogous to pci_get_slot() increment the reference count in
get_zdev_by_fid(). Thus all users of get_zdev_by_fid() must drop the
reference once they are done with the zpci_dev.

Similar to pci_scan_single_device(), zpci_create_device() returns the
device with an initial count of 1 and the device added to the zpci_list
(analogous to the PCI bus' device_list). In turn users of
zpci_create_device() must only drop the reference once the device is
gone from the point of view of the zPCI subsystem, it might still be
referenced by the common PCI subsystem though.

Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

s390/pci: fix zpci_zdev_put() on reserve

Since commit 2a671f77ee49 ("s390/pci: fix use after free of zpci_dev")
the reference count of a zpci_dev is incremented between
pcibios_add_device() and pcib

s390/pci: fix zpci_zdev_put() on reserve

Since commit 2a671f77ee49 ("s390/pci: fix use after free of zpci_dev")
the reference count of a zpci_dev is incremented between
pcibios_add_device() and pcibios_release_device() which was supposed to
prevent the zpci_dev from being freed while the common PCI code has
access to it. It was missed however that the handling of zPCI
availability events assumed that once zpci_zdev_put() was called no
later availability event would still see the device. With the previously
mentioned commit however this assumption no longer holds and we must
make sure that we only drop the initial long-lived reference the zPCI
subsystem holds exactly once.

Do so by introducing a zpci_device_reserved() function that handles when
a device is reserved. Here we make sure the zpci_dev will not be
considered for further events by removing it from the zpci_list.

This also means that the device actually stays in the
ZPCI_FN_STATE_RESERVED state between the time we know it has been
reserved and the final reference going away. We thus need to consider it
a real state instead of just a conceptual state after the removal. The
final cleanup of PCI resources, removal from zbus, and destruction of
the IOMMU stays in zpci_release_device() to make sure holders of the
reference do see valid data until the release.

Fixes: 2a671f77ee49 ("s390/pci: fix use after free of zpci_dev")
Cc: stable@vger.kernel.org
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

show more ...

s390/pci: improve DMA translation init and exit

Currently zpci_dma_init_device()/zpci_dma_exit_device() is called as
part of zpci_enable_device()/zpci_disable_device() and errors for
zpci_dma_exit_d

s390/pci: improve DMA translation init and exit

Currently zpci_dma_init_device()/zpci_dma_exit_device() is called as
part of zpci_enable_device()/zpci_disable_device() and errors for
zpci_dma_exit_device() are always ignored even if we could abort.

Improve upon this by moving zpci_dma_exit_device() out of
zpci_disable_device() and check for errors whenever we have a way to
abort the current operation. Note that for example in
zpci_event_hard_deconfigured() the device is expected to be gone so we
really can't abort and proceed even in case of error.

Similarly move the cc == 3 special case out of zpci_unregister_ioat()
and into the callers allowing to abort when finding an already disabled
devices precludes proceeding with the operation.

While we are at it log IOAT register/unregister errors in the s390
debugfs log,

Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

show more ...

s390/pci: handle stale deconfiguration events

The PCIs event with PEC 0x0303 or 0x0304 are a request to deconfigure
a PCI function, respectively an indication that it was already
deconfigured by the

s390/pci: handle stale deconfiguration events

The PCIs event with PEC 0x0303 or 0x0304 are a request to deconfigure
a PCI function, respectively an indication that it was already
deconfigured by the platform. If such an event is queued during boot it
may happen that the platform has already adjusted the configuration flag
of the relevant function in the CLP List PCI Functions result. In this
case we might not have configured the PCI function at all and should
thus ignore the event. Note that no locking is necessary as event
handling only starts after we have fully initialized the zPCI subsystem
and scanned all PCI devices listed in the CLP result.

Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Acked-by: Pierre Morel <pmorel@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

show more ...

s390/pci: rename zpci_configure_device()

With zpci_configure_device() now always called on a device that has
already been configured on the platform level its name has become
misleading. Rename it t

s390/pci: rename zpci_configure_device()

With zpci_configure_device() now always called on a device that has
already been configured on the platform level its name has become
misleading. Rename it to zpci_scan_configured_device() to signify that
the function now only handles the correct scanning of a newly configured
PCI function taking care of the special handling necessary for function
0 and functions parked waiting for a PCI bus that can't be created
without first seeing function 0.

Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

show more ...

s390/pci: separate zbus registration from scanning

Now that the zbus can be created without being scanned we can go one
step further and make registering a device to a zbus independent from
scanning

s390/pci: separate zbus registration from scanning

Now that the zbus can be created without being scanned we can go one
step further and make registering a device to a zbus independent from
scanning it. This way the zbus handling becomes much more natural
in that functions can be registered on the zbus to be scanned later more
closely resembling the handling of both real PCI hardware and other
virtual PCI busses like Hyper-V's virtual PCI bus (see for example
drivers/pci/controller/pci-hyperv.c:create_root_hv_pci_bus()).

Having zbus registration separate from scanning allows us to return
fully initialized but still disabled zdevs from zpci_create_device()
which can then be configured just as we would configure a zdev from
standby (minus the SCLP Configure already done by the platform). There
is still the exception that a PCI function with non-zero devfn can be
plugged before its PCI bus, which depends on the function with zero
devfn, is created. In this case the zdev returend from
zpci_create_device() is still missing its bus, hotplug slot, and
resources which need to be created later but at least it doesn't wait in
the enabled state and can otherwise be treated as initialized.

With this we also separate the initial PCI scan using CLP List PCI
Functions into two phases. In the CLP loop's callback we only register
each function with a virtual zbus creating the latter as needed. Then,
after we have built this virtual PCI topology based on our list of
zbusses, we can make use of the common code functionality to scan each
complete zbus as a separate child bus.

Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Acked-by: Pierre Morel <pmorel@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

show more ...

s390/pci: fix DMA cleanup on hard deconfigure

In commit dee60c0dbc83 ("s390/pci: add zpci_event_hard_deconfigured()")
we added a zdev_enabled() check to what was previously an uncoditional
call to z

s390/pci: fix DMA cleanup on hard deconfigure

In commit dee60c0dbc83 ("s390/pci: add zpci_event_hard_deconfigured()")
we added a zdev_enabled() check to what was previously an uncoditional
call to zpci_disable_device(). There are two problems with that. Firstly
zpci_had_deconfigured() is only called on event 0x0304 for which the
device is always already disabled by the platform so it is always false.
Secondly zpci_disable_device() not only disables the device but also
calls zpci_dma_exit_device() which is thus not called and we leak the
DMA tables.

Fix this by calling zpci_disable_device() unconditionally to perform
Linux side cleanup including the freeing of DMA tables.

Fixes: dee60c0dbc83 ("s390/pci: add zpci_event_hard_deconfigured()")
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Acked-by: Pierre Morel <pmorel@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

show more ...

s390/pci: move zpci_remove_device() to bus code

The zpci_remove_device() function removes the device from the PCI common
code core which is an operation dealing primarily with the zbus and PCI
bus c

s390/pci: move zpci_remove_device() to bus code

The zpci_remove_device() function removes the device from the PCI common
code core which is an operation dealing primarily with the zbus and PCI
bus code. With that and to match an upcoming refactoring of the
symmetric scanning part move it to the bus code.

Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

show more ...

s390/pci: unify de-/configure for slots and events

A zPCI event with PEC 0x0301 for an existing zPCI device goes through
the same actions as enable_slot(). Similarly a zPCI event with PEC
0x0303 doe

s390/pci: unify de-/configure for slots and events

A zPCI event with PEC 0x0301 for an existing zPCI device goes through
the same actions as enable_slot(). Similarly a zPCI event with PEC
0x0303 does the same steps as disable_slot().
We can thus unify both actions as zpci_configure_device() respectively
zpci_deconfigure_device().

Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

show more ...

s390/pci: add zpci_event_hard_deconfigured()

Extract the handling of PEC 0x0304 into a function and make sure we only
attempt to disable the function if it is enabled. Also check for errors
returned

s390/pci: add zpci_event_hard_deconfigured()

Extract the handling of PEC 0x0304 into a function and make sure we only
attempt to disable the function if it is enabled. Also check for errors
returned by zpci_disable_device() and leave the function alone if there
are any.

Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

show more ...

s390/pci: fix leak of PCI device structure

In commit 05bc1be6db4b2 ("s390/pci: create zPCI bus") we removed the
pci_dev_put() call matching the earlier pci_get_slot() done as part of
__zpci_event_av

s390/pci: fix leak of PCI device structure

In commit 05bc1be6db4b2 ("s390/pci: create zPCI bus") we removed the
pci_dev_put() call matching the earlier pci_get_slot() done as part of
__zpci_event_availability(). This was based on the wrong understanding
that the device_put() done as part of pci_destroy_device() would counter
the pci_get_slot() when it only counters the initial reference. This
same understanding and existing bad example also lead to not doing
a pci_dev_put() in zpci_remove_device().

Since releasing the PCI devices, unlike releasing the PCI slot, does not
print any debug message for testing I added one in pci_release_dev().
This revealed that we are indeed leaking the PCI device on PCI
hotunplug. Further testing also revealed another missing pci_dev_put() in
disable_slot().

Fix this by adding the missing pci_dev_put() in disable_slot() and fix
zpci_remove_device() with the correct pci_dev_put() calls. Also instead
of calling pci_get_slot() in __zpci_event_availability() to determine if
a PCI device is registered and then doing the same again in
zpci_remove_device() do this once in zpci_remove_device() which makes
sure that the pdev in __zpci_event_availability() is only used for the
result of pci_scan_single_device() which does not need a reference count
decremnt as its ownership goes to the PCI bus.

Also move the check if zdev->zbus->bus is set into zpci_remove_device()
since it may be that we're removing a device with devfn != 0 which never
had a PCI bus. So we can still set the pdev->error_state to indicate
that the device is not usable anymore, add a flag to set the error state.

Fixes: 05bc1be6db4b2 ("s390/pci: create zPCI bus")
Cc: <stable@vger.kernel.org> # 5.8+: e1bff843cde6 s390/pci: remove superfluous zdev->zbus check
Cc: <stable@vger.kernel.org> # 5.8+: ba764dd703fe s390/pci: refactor zpci_create_device()
Cc: <stable@vger.kernel.org> # 5.8+
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

show more ...

s390/pci: refactor zpci_create_device()

Currently zpci_create_device() is only called in clp_add_pci_device()
which allocates the memory for the struct zpci_dev being created. There
is little separa

s390/pci: refactor zpci_create_device()

Currently zpci_create_device() is only called in clp_add_pci_device()
which allocates the memory for the struct zpci_dev being created. There
is little separation of concerns as only both functions together can
create a zpci_dev and the only CLP specific code in
clp_add_pci_device() is a call to clp_query_pci_fn().

Improve this by removing clp_add_pci_device() and refactor
zpci_create_device() such that it alone creates and initializes the
zpci_dev given the FID and Function Handle. For this we need to make
clp_query_pci_fn() non-static. While at it remove the function handle
parameter since we can just take that from the zpci_dev. Also move
adding to the zpci_list to after the zdev has been fully created which
eliminates a window where a partially initialized zdev can be found by
get_zdev_by_fid().

Acked-by: Pierre Morel <pmorel@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

show more ...

s390/pci: remove superfluous zdev->zbus check

Checking zdev->zbus for NULL in __zpci_event_availability() is
superfluous as it can never be NULL at this point. While harmless this
check causes smatc

s390/pci: remove superfluous zdev->zbus check

Checking zdev->zbus for NULL in __zpci_event_availability() is
superfluous as it can never be NULL at this point. While harmless this
check causes smatch warnings because we later access zdev->zbus with
only having checked zdev != NULL which is sufficient.

The reason zdev->zbus can never be NULL is since with zdev != NULL given
we know the zdev came from get_zdev_by_fid() and thus the zpci_list.
Now on first glance at zpci_create_device() one may assume that there is
a window where the zdev is in the list without a zdev, however this
window can't overlap with __zpci_event_availability() as
zpci_create_device() either runs on the same kthread as part of
availability events, or during the initial CLP List PCI at which point
the __zpci_event_availability() is not yet called as zPCI is not yet
initialized.

Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

show more ...

s390/pci: fix leak of PCI device structure

commit 0b13525c20febcfecccf6fc1db5969727401317d upstream.

In commit 05bc1be6db4b2 ("s390/pci: create zPCI bus") we removed the
pci_dev_put() call matching

s390/pci: fix leak of PCI device structure

commit 0b13525c20febcfecccf6fc1db5969727401317d upstream.

In commit 05bc1be6db4b2 ("s390/pci: create zPCI bus") we removed the
pci_dev_put() call matching the earlier pci_get_slot() done as part of
__zpci_event_availability(). This was based on the wrong understanding
that the device_put() done as part of pci_destroy_device() would counter
the pci_get_slot() when it only counters the initial reference. This
same understanding and existing bad example also lead to not doing
a pci_dev_put() in zpci_remove_device().

Since releasing the PCI devices, unlike releasing the PCI slot, does not
print any debug message for testing I added one in pci_release_dev().
This revealed that we are indeed leaking the PCI device on PCI
hotunplug. Further testing also revealed another missing pci_dev_put() in
disable_slot().

Fix this by adding the missing pci_dev_put() in disable_slot() and fix
zpci_remove_device() with the correct pci_dev_put() calls. Also instead
of calling pci_get_slot() in __zpci_event_availability() to determine if
a PCI device is registered and then doing the same again in
zpci_remove_device() do this once in zpci_remove_device() which makes
sure that the pdev in __zpci_event_availability() is only used for the
result of pci_scan_single_device() which does not need a reference count
decremnt as its ownership goes to the PCI bus.

Also move the check if zdev->zbus->bus is set into zpci_remove_device()
since it may be that we're removing a device with devfn != 0 which never
had a PCI bus. So we can still set the pdev->error_state to indicate
that the device is not usable anymore, add a flag to set the error state.

Fixes: 05bc1be6db4b2 ("s390/pci: create zPCI bus")
Cc: <stable@vger.kernel.org> # 5.8+: e1bff843cde6 s390/pci: remove superfluous zdev->zbus check
Cc: <stable@vger.kernel.org> # 5.8+: ba764dd703fe s390/pci: refactor zpci_create_device()
Cc: <stable@vger.kernel.org> # 5.8+
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

s390/pci: remove superfluous zdev->zbus check

commit e1bff843cde62a45a287b7f9b4cd5e824e8e49e2 upstream.

Checking zdev->zbus for NULL in __zpci_event_availability() is
superfluous as it can never be

s390/pci: remove superfluous zdev->zbus check

commit e1bff843cde62a45a287b7f9b4cd5e824e8e49e2 upstream.

Checking zdev->zbus for NULL in __zpci_event_availability() is
superfluous as it can never be NULL at this point. While harmless this
check causes smatch warnings because we later access zdev->zbus with
only having checked zdev != NULL which is sufficient.

The reason zdev->zbus can never be NULL is since with zdev != NULL given
we know the zdev came from get_zdev_by_fid() and thus the zpci_list.
Now on first glance at zpci_create_device() one may assume that there is
a window where the zdev is in the list without a zdev, however this
window can't overlap with __zpci_event_availability() as
zpci_create_device() either runs on the same kthread as part of
availability events, or during the initial CLP List PCI at which point
the __zpci_event_availability() is not yet called as zPCI is not yet
initialized.

Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

s390/pci: refactor zpci_create_device()

commit ba764dd703feacb5a9c410d191af1b6cfbe96845 upstream.

Currently zpci_create_device() is only called in clp_add_pci_device()
which allocates the memory fo

s390/pci: refactor zpci_create_device()

commit ba764dd703feacb5a9c410d191af1b6cfbe96845 upstream.

Currently zpci_create_device() is only called in clp_add_pci_device()
which allocates the memory for the struct zpci_dev being created. There
is little separation of concerns as only both functions together can
create a zpci_dev and the only CLP specific code in
clp_add_pci_device() is a call to clp_query_pci_fn().

Improve this by removing clp_add_pci_device() and refactor
zpci_create_device() such that it alone creates and initializes the
zpci_dev given the FID and Function Handle. For this we need to make
clp_query_pci_fn() non-static. While at it remove the function handle
parameter since we can just take that from the zpci_dev. Also move
adding to the zpci_list to after the zdev has been fully created which
eliminates a window where a partially initialized zdev can be found by
get_zdev_by_fid().

Acked-by: Pierre Morel <pmorel@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

s390/pci: fix hot-plug of PCI function missing bus

Under some circumstances in particular with "Reconfigure I/O Path"
a zPCI function may first appear in Standby through a PCI event with
PEC 0x0302

s390/pci: fix hot-plug of PCI function missing bus

Under some circumstances in particular with "Reconfigure I/O Path"
a zPCI function may first appear in Standby through a PCI event with
PEC 0x0302 which initially makes it visible to the zPCI subsystem,
Only after that is it configured with a zPCI event with PEC 0x0301.
If the zbus is still missing a PCI function zero (devfn == 0) when the
PCI event 0x0301 is handled zdev->zbus->bus is still NULL and gets
dereferenced in common code.
Check for this case and enable but don't scan the zPCI function.
This matches what would happen if we immediately got the 0x0301
configuration request or the function was included in CLP List PCI.
In all cases the PCI functions with devfn != 0 will be scanned once
function 0 appears.

Fixes: 3047766bc6ec ("s390/pci: fix enabling a reserved PCI function")
Cc: <stable@vger.kernel.org> # 5.8
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Acked-by: Pierre Morel <pmorel@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

show more ...

s390/pci: remove clp_rescan_pci_devices()

there is only one call site of clp_rescan_pci_devices() and
all the function does is call zpci_remove_reserved_devices()
followed by a duplicating clp_scan_

s390/pci: remove clp_rescan_pci_devices()

there is only one call site of clp_rescan_pci_devices() and
all the function does is call zpci_remove_reserved_devices()
followed by a duplicating clp_scan_pci_devices().
So inline the single call as a call to zpci_remove_reserved_devices()
and clp_scan_pci_devices() and remove the function.

Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

show more ...

s390/pci: fix leak of DMA tables on hard unplug

commit f606b3ef47c9 ("s390/pci: adapt events for zbus") removed the
zpci_disable_device() call for a zPCI event with PEC 0x0304 because
the device is

s390/pci: fix leak of DMA tables on hard unplug

commit f606b3ef47c9 ("s390/pci: adapt events for zbus") removed the
zpci_disable_device() call for a zPCI event with PEC 0x0304 because
the device is already deconfigured by the platform.
This however skips the Linux side of the disable in particular it leads
to leaking the DMA tables and bitmaps because zpci_dma_exit_device() is
never called on the device.

If the device transitions to the Reserved state we call zpci_zdev_put()
but zpci_release_device() will not call zpci_disable_device() because
the state of the zPCI function is already ZPCI_FN_STATE_STANDBY.

If the device is put into the Standby state, zpci_disable_device() is
not called and the device is assumed to have been put in Standby through
platform action.
At this point the device may be removed by a subsequent event with PEC
0x0308 or 0x0306 which calls zpci_zdev_put() with the same problem
as above or the device may be configured again in which case
zpci_disable_device() is also not called.

Fix this by calling zpci_disable_device() explicitly for PEC 0x0304 as
before. To make it more clear that zpci_disable_device() may be called,
even if the lower level device has already been disabled by the
platform, add a comment to zpci_disable_device().

Cc: <stable@vger.kernel.org> # 5.8
Fixes: f606b3ef47c9 ("s390/pci: adapt events for zbus")
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

show more ...

s390/pci: re-introduce zpci_remove_device()

For fixing the PF to VF link removal we need to perform some action on
every removal of a zdev from the common PCI subsystem.
So in preparation re-introdu

s390/pci: re-introduce zpci_remove_device()

For fixing the PF to VF link removal we need to perform some action on
every removal of a zdev from the common PCI subsystem.
So in preparation re-introduce zpci_remove_device() and use that instead
of directly calling the common code functions. This was actually still
declared from earlier code but no longer implemented.

Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

show more ...