Remove orphaned CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT

After the commit 93d102f094be9beab2 ("printk: remove safe buffers"),
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT is no longer useful. Remove it.

Signed-off-by

Remove orphaned CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT

After the commit 93d102f094be9beab2 ("printk: remove safe buffers"),
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT is no longer useful. Remove it.

Signed-off-by: Marc Aurèle La France <tsi@tuyoix.net>
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
[pmladek@suse.cz: Cleaned up the commit message.]
Signed-off-by: Petr Mladek <pmladek@suse.com>
Fixes: 93d102f094be9beab ("printk: remove safe buffers")
Link: https://lore.kernel.org/r/5c19e248-1b6b-330c-7c4c-a824688daefe@tuyoix.net

show more ...

mm, slob: rename CONFIG_SLOB to CONFIG_SLOB_DEPRECATED

As explained in [1], we would like to remove SLOB if possible.

- There are no known users that need its somewhat lower memory footprint
so m

mm, slob: rename CONFIG_SLOB to CONFIG_SLOB_DEPRECATED

As explained in [1], we would like to remove SLOB if possible.

- There are no known users that need its somewhat lower memory footprint
so much that they cannot handle SLUB (after some modifications by the
previous patches) instead.

- It is an extra maintenance burden, and a number of features are
incompatible with it.

- It blocks the API improvement of allowing kfree() on objects allocated
via kmem_cache_alloc().

As the first step, rename the CONFIG_SLOB option in the slab allocator
configuration choice to CONFIG_SLOB_DEPRECATED. Add CONFIG_SLOB
depending on CONFIG_SLOB_DEPRECATED as an internal option to avoid code
churn. This will cause existing .config files and defconfigs with
CONFIG_SLOB=y to silently switch to the default (and recommended
replacement) SLUB, while still allowing SLOB to be configured by anyone
that notices and needs it. But those should contact the slab maintainers
and linux-mm@kvack.org as explained in the updated help. With no valid
objections, the plan is to update the existing defconfigs to SLUB and
remove SLOB in a few cycles.

To make SLUB more suitable replacement for SLOB, a CONFIG_SLUB_TINY
option was introduced to limit SLUB's memory overhead.
There is a number of defconfigs specifying CONFIG_SLOB=y. As part of
this patch, update them to select CONFIG_SLUB and CONFIG_SLUB_TINY.

[1] https://lore.kernel.org/all/b35c3f82-f67b-2103-7d82-7a7ba7521439@suse.cz/

Cc: Russell King <linux@armlinux.org.uk>
Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Conor Dooley <conor@kernel.org>
Cc: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi> # OMAP1
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> # riscv k210
Acked-by: Arnd Bergmann <arnd@arndb.de> # arm
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Christoph Lameter <cl@linux.com>

show more ...

RISC-V: Add CONFIG_{NON,}PORTABLE

The RISC-V port has collected a handful of options that are
fundamentally non-portable. To prevent users from shooting themselves
in the foot, hide them all behind

RISC-V: Add CONFIG_{NON,}PORTABLE

The RISC-V port has collected a handful of options that are
fundamentally non-portable. To prevent users from shooting themselves
in the foot, hide them all behind a config entry that explicitly calls
out that non-portable binaries may be produced.

Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20220521193356.26562-1-palmer@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

show more ...

RISC-V: K210 defconfigs: Drop redundant MEMBARRIER=n

As of 93917ad50972 ("RISC-V: Add support for restartable sequence") we
have support for restartable sequences, which default to enabled. These
s

RISC-V: K210 defconfigs: Drop redundant MEMBARRIER=n

As of 93917ad50972 ("RISC-V: Add support for restartable sequence") we
have support for restartable sequences, which default to enabled. These
select MEMBARRIER, so disabling it is now redundant.

Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

show more ...

RISC-V: nommu_virt: Drop unused SLAB_MERGE_DEFAULT

Our nommu_virt_defconfig set SLOB=y and SLAB_MERGE_DEFAULT=n. As of
eb52c0fc2331 ("mm: Make SLAB_MERGE_DEFAULT depend on SL[AU]B") it's no
longer

RISC-V: nommu_virt: Drop unused SLAB_MERGE_DEFAULT

Our nommu_virt_defconfig set SLOB=y and SLAB_MERGE_DEFAULT=n. As of
eb52c0fc2331 ("mm: Make SLAB_MERGE_DEFAULT depend on SL[AU]B") it's no
longer necessary to set the second, which appears to never have had any
effect for SLOB=y anyway.

This was suggested by savedefconfig.

Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

show more ...

riscv: Get rid of MAXPHYSMEM configs

CONFIG_MAXPHYSMEM_* are actually never used, even the nommu defconfigs
selecting the MAXPHYSMEM_2GB had no effects on PAGE_OFFSET since it was
preempted by !MMU

riscv: Get rid of MAXPHYSMEM configs

CONFIG_MAXPHYSMEM_* are actually never used, even the nommu defconfigs
selecting the MAXPHYSMEM_2GB had no effects on PAGE_OFFSET since it was
preempted by !MMU case right before.

In addition, the move of the kernel mapping at the end of the address
space broke the use of MAXPHYSMEM_2G with MMU since it defines PAGE_OFFSET
at the same address as the kernel mapping.

Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Fixes: 2bfc6cd81bd1 ("riscv: Move kernel mapping outside of linear mapping")
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Conor Dooley <Conor.Dooley@microchip.com>
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

show more ...

RISC-V: defconfigs: Sort CONFIG_BLK_DEV_BSG

This should have no functional change, it just sorts CONFIG_BLK_DEV_BSG
the same way savedefconfig does.

Reviewed-by: Anup Patel <anup@brainfault.org>
Si

RISC-V: defconfigs: Sort CONFIG_BLK_DEV_BSG

This should have no functional change, it just sorts CONFIG_BLK_DEV_BSG
the same way savedefconfig does.

Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

show more ...

riscv: Get rid of MAXPHYSMEM configs

commit db1503d355a79d1d4255a9996f20e72848b74a56 upstream.

CONFIG_MAXPHYSMEM_* are actually never used, even the nommu defconfigs
selecting the MAXPHYSMEM_2GB ha

riscv: Get rid of MAXPHYSMEM configs

commit db1503d355a79d1d4255a9996f20e72848b74a56 upstream.

CONFIG_MAXPHYSMEM_* are actually never used, even the nommu defconfigs
selecting the MAXPHYSMEM_2GB had no effects on PAGE_OFFSET since it was
preempted by !MMU case right before.

In addition, the move of the kernel mapping at the end of the address
space broke the use of MAXPHYSMEM_2G with MMU since it defines PAGE_OFFSET
at the same address as the kernel mapping.

Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Fixes: 2bfc6cd81bd1 ("riscv: Move kernel mapping outside of linear mapping")
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Conor Dooley <Conor.Dooley@microchip.com>
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

RISC-V: Remove CLINT related code from timer and arch

Right now the RISC-V timer driver is convoluted to support:
1. Linux RISC-V S-mode (with MMU) where it will use TIME CSR for
clocksource and

RISC-V: Remove CLINT related code from timer and arch

Right now the RISC-V timer driver is convoluted to support:
1. Linux RISC-V S-mode (with MMU) where it will use TIME CSR for
clocksource and SBI timer calls for clockevent device.
2. Linux RISC-V M-mode (without MMU) where it will use CLINT MMIO
counter register for clocksource and CLINT MMIO compare register
for clockevent device.

We now have a separate CLINT timer driver which also provide CLINT
based IPI operations so let's remove CLINT MMIO related code from
arch/riscv directory and RISC-V timer driver.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Tested-by: Emil Renner Berhing <kernel@esmil.dk>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

show more ...

riscv: Add jump-label implementation

Add jump-label implementation based on the ARM64 version
and add CONFIG_JUMP_LABEL=y to the defconfigs.

Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Re

riscv: Add jump-label implementation

Add jump-label implementation based on the ARM64 version
and add CONFIG_JUMP_LABEL=y to the defconfigs.

Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Reviewed-by: Björn Töpel <bjorn.topel@gmail.com>
Tested-by: Björn Töpel <bjorn.topel@gmail.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

show more ...

riscv: add nommu support

The kernel runs in M-mode without using page tables, and thus can't run
bare metal without help from additional firmware.

Most of the patch is just stubbing out code not ne

riscv: add nommu support

The kernel runs in M-mode without using page tables, and thus can't run
bare metal without help from additional firmware.

Most of the patch is just stubbing out code not needed without page
tables, but there is an interesting detail in the signals implementation:

- The normal RISC-V syscall ABI only implements rt_sigreturn as VDSO
entry point, but the ELF VDSO is not supported for nommu Linux.
We instead copy the code to call the syscall onto the stack.

In addition to enabling the nommu code a new defconfig for a small
kernel image that can run in nommu mode on qemu is also provided, to run
a kernel in qemu you can use the following command line:

qemu-system-riscv64 -smp 2 -m 64 -machine virt -nographic \
-kernel arch/riscv/boot/loader \
-drive file=rootfs.ext2,format=raw,id=hd0 \
-device virtio-blk-device,drive=hd0

Contains contributions from Damien Le Moal <Damien.LeMoal@wdc.com>.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anup Patel <anup@brainfault.org>
[paul.walmsley@sifive.com: updated to apply; add CONFIG_MMU guards
around PCI_IOBASE definition to fix build issues; fixed checkpatch
issues; move the PCI_IO_* and VMEMMAP address space macros along
with the others; resolve sparse warning]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>

show more ...

RISC-V: Remove CLINT related code from timer and arch

Right now the RISC-V timer driver is convoluted to support:
1. Linux RISC-V S-mode (with MMU) where it will use TIME CSR for

RISC-V: Remove CLINT related code from timer and arch

Right now the RISC-V timer driver is convoluted to support:
1. Linux RISC-V S-mode (with MMU) where it will use TIME CSR for
clocksource and SBI timer calls for clockevent device.
2. Linux RISC-V M-mode (without MMU) where it will use CLINT MMIO
counter register for clocksource and CLINT MMIO compare register
for clockevent device.

We now have a separate CLINT timer driver which also provide CLINT
based IPI operations so let's remove CLINT MMIO related code from
arch/riscv directory and RISC-V timer driver.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Tested-by: Emil Renner Berhing <kernel@esmil.dk>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

show more ...

riscv: Add jump-label implementation

Add jump-label implementation based on the ARM64 version
and add CONFIG_JUMP_LABEL=y to the defconfigs.

Signed-off-by: Emil Renner Berthing

riscv: Add jump-label implementation

Add jump-label implementation based on the ARM64 version
and add CONFIG_JUMP_LABEL=y to the defconfigs.

Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Reviewed-by: Björn Töpel <bjorn.topel@gmail.com>
Tested-by: Björn Töpel <bjorn.topel@gmail.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

show more ...

riscv: add nommu support

The kernel runs in M-mode without using page tables, and thus can't run
bare metal without help from additional firmware.

Most of the patch is just stub

riscv: add nommu support

The kernel runs in M-mode without using page tables, and thus can't run
bare metal without help from additional firmware.

Most of the patch is just stubbing out code not needed without page
tables, but there is an interesting detail in the signals implementation:

- The normal RISC-V syscall ABI only implements rt_sigreturn as VDSO
entry point, but the ELF VDSO is not supported for nommu Linux.
We instead copy the code to call the syscall onto the stack.

In addition to enabling the nommu code a new defconfig for a small
kernel image that can run in nommu mode on qemu is also provided, to run
a kernel in qemu you can use the following command line:

qemu-system-riscv64 -smp 2 -m 64 -machine virt -nographic \
-kernel arch/riscv/boot/loader \
-drive file=rootfs.ext2,format=raw,id=hd0 \
-device virtio-blk-device,drive=hd0

Contains contributions from Damien Le Moal <Damien.LeMoal@wdc.com>.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anup Patel <anup@brainfault.org>
[paul.walmsley@sifive.com: updated to apply; add CONFIG_MMU guards
around PCI_IOBASE definition to fix build issues; fixed checkpatch
issues; move the PCI_IO_* and VMEMMAP address space macros along
with the others; resolve sparse warning]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>

show more ...