Revision tags: v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45, v6.1.44, v6.1.43, v6.1.42, v6.1.41, v6.1.40, v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35, v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22, v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70, v5.15.69, v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62, v5.15.61, v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55, v5.15.54, v5.15.53, v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48, v5.15.47, v5.15.46, v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.16, v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65 |
|
#
25e69962 |
| 14-Sep-2021 |
Vasant Hegde <hegdevasant@linux.vnet.ibm.com> |
powerpc/powernv/flash: Check OPAL flash calls exist before using
Currently only FSP based powernv systems supports firmware update interfaces. Hence check that the token OPAL_FLASH_VALIDATE exists b
powerpc/powernv/flash: Check OPAL flash calls exist before using
Currently only FSP based powernv systems supports firmware update interfaces. Hence check that the token OPAL_FLASH_VALIDATE exists before initalising the flash driver.
Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210914101630.30613-1-hegdevasant@linux.vnet.ibm.com
show more ...
|
#
6b3a3e12 |
| 07-Mar-2022 |
Rohan McLure <rmclure@linux.ibm.com> |
powerpc: declare unmodified attribute_group usages const
Inspired by (bd75b4ef4977: Constify static attribute_group structs), accepted by linux-next, reported: https://patchwork.ozlabs.org/project/l
powerpc: declare unmodified attribute_group usages const
Inspired by (bd75b4ef4977: Constify static attribute_group structs), accepted by linux-next, reported: https://patchwork.ozlabs.org/project/linuxppc-dev/patch/20220210202805.7750-4-rikard.falkeborn@gmail.com/
Nearly all singletons of type struct attribute_group are never modified, and so are candidates for being const. Declare them as const.
Signed-off-by: Rohan McLure <rmclure@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220307231414.86560-1-rmclure@linux.ibm.com
show more ...
|
Revision tags: v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4, v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7, v5.2.6, v5.2.5, v5.2.4, v5.2.3, v5.2.2, v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8, v5.1.7, v5.1.6 |
|
#
2874c5fd |
| 27-May-2019 |
Thomas Gleixner <tglx@linutronix.de> |
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify it under the terms of th
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 3029 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v5.1.5, v5.1.4, v5.1.3, v5.1.2, v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11, v5.0.10, v5.0.9, v5.0.8, v5.0.7, v5.0.6, v5.0.5, v5.0.4, v5.0.3, v4.19.29, v5.0.2, v4.19.28, v5.0.1, v4.19.27, v5.0, v4.19.26, v4.19.25, v4.19.24, v4.19.23, v4.19.22, v4.19.21, v4.19.20, v4.19.19, v4.19.18, v4.19.17, v4.19.16, v4.19.15, v4.19.14, v4.19.13, v4.19.12, v4.19.11, v4.19.10, v4.19.9, v4.19.8, v4.19.7, v4.19.6, v4.19.5, v4.19.4, v4.18.20, v4.19.3, v4.18.19, v4.19.2, v4.18.18, v4.18.17, v4.19.1, v4.19, v4.18.16, v4.18.15, v4.18.14, v4.18.13, v4.18.12, v4.18.11, v4.18.10, v4.18.9, v4.18.7, v4.18.6, v4.18.5, v4.17.18, v4.18.4, v4.18.3, v4.17.17, v4.18.2, v4.17.16, v4.17.15, v4.18.1, v4.18, v4.17.14, v4.17.13, v4.17.12, v4.17.11, v4.17.10, v4.17.9, v4.17.8, v4.17.7, v4.17.6, v4.17.5, v4.17.4, v4.17.3, v4.17.2, v4.17.1, v4.17, v4.16 |
|
#
f2748bdf |
| 01-Apr-2018 |
Nicholas Piggin <npiggin@gmail.com> |
powerpc/powernv: Always stop secondaries before reboot/shutdown
Currently powernv reboot and shutdown requests just leave secondaries to do their own things. This is undesirable because they can tri
powerpc/powernv: Always stop secondaries before reboot/shutdown
Currently powernv reboot and shutdown requests just leave secondaries to do their own things. This is undesirable because they can trigger any number of watchdogs while waiting for reboot, but also we don't know what else they might be doing -- they might be causing trouble, trampling memory, etc.
The opal scheduled flash update code already ran into watchdog problems due to flashing taking a long time, and it was fixed with 2196c6f1ed ("powerpc/powernv: Return secondary CPUs to firmware before FW update"), which returns secondaries to opal. It's been found that regular reboots can take over 10 seconds, which can result in the hard lockup watchdog firing,
reboot: Restarting system [ 360.038896709,5] OPAL: Reboot request... Watchdog CPU:0 Hard LOCKUP Watchdog CPU:44 detected Hard LOCKUP other CPUS:16 Watchdog CPU:16 Hard LOCKUP watchdog: BUG: soft lockup - CPU#16 stuck for 3s! [swapper/16:0]
This patch removes the special case for flash update, and calls smp_send_stop in all cases before calling reboot/shutdown.
smp_send_stop could return CPUs to OPAL, the main reason not to is that the request could come from a NMI that interrupts OPAL code, so re-entry to OPAL can cause a number of problems. Putting secondaries into simple spin loops improves the chances of a successful reboot.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
show more ...
|
Revision tags: v4.15, v4.13.16, v4.14, v4.13.5, v4.13, v4.12, v4.10.17, v4.10.16, v4.10.15, v4.10.14, v4.10.13, v4.10.12, v4.10.11, v4.10.10, v4.10.9, v4.10.8, v4.10.7, v4.10.6, v4.10.5, v4.10.4, v4.10.3, v4.10.2, v4.10.1, v4.10 |
|
#
a0828cf5 |
| 19-Jan-2017 |
Markus Elfring <elfring@users.sourceforge.net> |
powerpc: Use sizeof(*foo) rather than sizeof(struct foo)
It's slightly less error prone to use sizeof(*foo) rather than specifying the type.
Signed-off-by: Markus Elfring <elfring@users.sourceforge
powerpc: Use sizeof(*foo) rather than sizeof(struct foo)
It's slightly less error prone to use sizeof(*foo) rather than specifying the type.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> [mpe: Consolidate into one patch, rewrite change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
show more ...
|
#
8bfa42ab |
| 02-Aug-2017 |
Bhumika Goyal <bhumirks@gmail.com> |
powerpc: Add const to bin_attribute structures
Declare bin_attribute structures as const as they are only passed as an argument to the function sysfs_create_bin_file. This argument is of type const,
powerpc: Add const to bin_attribute structures
Declare bin_attribute structures as const as they are only passed as an argument to the function sysfs_create_bin_file. This argument is of type const, so declare the structure as const.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
show more ...
|
Revision tags: v4.9, openbmc-4.4-20161121-1, v4.4.33, v4.4.32, v4.4.31, v4.4.30, v4.4.29, v4.4.28, v4.4.27, v4.7.10, openbmc-4.4-20161021-1, v4.7.9, v4.4.26, v4.7.8, v4.4.25, v4.4.24, v4.7.7, v4.8, v4.4.23, v4.7.6, v4.7.5, v4.4.22, v4.4.21, v4.7.4, v4.7.3, v4.4.20, v4.7.2, v4.4.19, openbmc-4.4-20160819-1, v4.7.1, v4.4.18, v4.4.17, openbmc-4.4-20160804-1, v4.4.16, v4.7, openbmc-4.4-20160722-1, openbmc-20160722-1, openbmc-20160713-1, v4.4.15, v4.6.4, v4.6.3, v4.4.14, v4.6.2, v4.4.13, openbmc-20160606-1, v4.6.1, v4.4.12, openbmc-20160521-1, v4.4.11, openbmc-20160518-1, v4.6, v4.4.10, openbmc-20160511-1, openbmc-20160505-1, v4.4.9, v4.4.8, v4.4.7, openbmc-20160329-2, openbmc-20160329-1, openbmc-20160321-1, v4.4.6, v4.5, v4.4.5, v4.4.4, v4.4.3, openbmc-20160222-1, v4.4.2, openbmc-20160212-1, openbmc-20160210-1, openbmc-20160202-2, openbmc-20160202-1, v4.4.1, openbmc-20160127-1, openbmc-20160120-1, v4.4, openbmc-20151217-1, openbmc-20151210-1, openbmc-20151202-1, openbmc-20151123-1, openbmc-20151118-1, openbmc-20151104-1, v4.3, openbmc-20151102-1, openbmc-20151028-1, v4.3-rc1, v4.2, v4.2-rc8, v4.2-rc7, v4.2-rc6, v4.2-rc5, v4.2-rc4, v4.2-rc3, v4.2-rc2, v4.2-rc1, v4.1, v4.1-rc8, v4.1-rc7, v4.1-rc6, v4.1-rc5, v4.1-rc4, v4.1-rc3, v4.1-rc2, v4.1-rc1, v4.0, v4.0-rc7 |
|
#
ed59190e |
| 01-Apr-2015 |
Cyril Bur <cyrilbur@gmail.com> |
powerpc/powernv: Add interfaces for flash device access
This change adds the OPAL interface definitions to allow Linux to read, write and erase from system flash devices. We register platform device
powerpc/powernv: Add interfaces for flash device access
This change adds the OPAL interface definitions to allow Linux to read, write and erase from system flash devices. We register platform devices for the flash devices exported by firmware.
We clash with the existing opal_flash_init function, which is really for the FSP flash update functionality, so we rename that initcall to opal_flash_update_init().
A future change will add an mtd driver that uses this interface.
Changes from Joel Stanley and Jeremy Kerr.
Signed-off-by: Cyril Bur <cyrilbur@gmail.com> Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Joel Stanley <joel@jms.id.au> Acked-by: Stewart Smith <stewart@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
show more ...
|
Revision tags: v4.0-rc6, v4.0-rc5, v4.0-rc4, v4.0-rc3, v4.0-rc2, v4.0-rc1 |
|
#
3f77df7f |
| 13-Feb-2015 |
Vasant Hegde <hegdevasant@linux.vnet.ibm.com> |
powerpc/powernv: Check image loaded or not before calling flash
Present code checks for update_flash_data in opal_flash_term_callback(). update_flash_data has been statically initialized to zero, an
powerpc/powernv: Check image loaded or not before calling flash
Present code checks for update_flash_data in opal_flash_term_callback(). update_flash_data has been statically initialized to zero, and that is the value of FLASH_IMG_READY. Also code update initialization happens during subsys init.
So if reboot is issued before the subsys init stage then we endup displaying "Flashing new firmware" message.. which may confuse end user.
This patch fixes above described issue by initializes update_flash status to invalid state.
Reported-by: Sam Bobroff <sam.bobroff@au1.ibm.com> Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
show more ...
|
Revision tags: v3.19, v3.19-rc7, v3.19-rc6, v3.19-rc5, v3.19-rc4, v3.19-rc3, v3.19-rc2, v3.19-rc1, v3.18, v3.18-rc7, v3.18-rc6, v3.18-rc5, v3.18-rc4, v3.18-rc3, v3.18-rc2, v3.18-rc1, v3.17, v3.17-rc7, v3.17-rc6, v3.17-rc5, v3.17-rc4, v3.17-rc3, v3.17-rc2, v3.17-rc1, v3.16, v3.16-rc7, v3.16-rc6, v3.16-rc5, v3.16-rc4, v3.16-rc3, v3.16-rc2, v3.16-rc1, v3.15 |
|
#
8b8f7bf4 |
| 04-Jun-2014 |
Vasant Hegde <hegdevasant@linux.vnet.ibm.com> |
powerpc/powernv: Pass buffer size to OPAL validate flash call
We pass actual buffer size to opal_validate_flash() OPAL API call and in return it contains output buffer size.
Commit cc146d1d (Fix li
powerpc/powernv: Pass buffer size to OPAL validate flash call
We pass actual buffer size to opal_validate_flash() OPAL API call and in return it contains output buffer size.
Commit cc146d1d (Fix little endian issues) missed to set the size param before making OPAL call. So firmware image validation fails.
This patch sets size variable before making OPAL call.
Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com> Tested-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
show more ...
|
Revision tags: v3.15-rc8, v3.15-rc7, v3.15-rc6, v3.15-rc5, v3.15-rc4, v3.15-rc3, v3.15-rc2, v3.15-rc1 |
|
#
2196c6f1 |
| 09-Apr-2014 |
Vasant Hegde <hegdevasant@linux.vnet.ibm.com> |
powerpc/powernv: Return secondary CPUs to firmware before FW update
Firmware update on PowerNV platform takes several minutes. During this time one CPU is stuck in FW and the kernel complains about
powerpc/powernv: Return secondary CPUs to firmware before FW update
Firmware update on PowerNV platform takes several minutes. During this time one CPU is stuck in FW and the kernel complains about "soft lockups".
This patch returns all secondary CPUs to firmware before starting firmware update process.
[ Reworked a bit and cleaned up -- BenH ]
Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
show more ...
|
#
3441f04b |
| 22-Apr-2014 |
Anton Blanchard <anton@samba.org> |
powerpc/powernv: Create OPAL sglist helper functions and fix endian issues
We have two copies of code that creates an OPAL sg list. Consolidate these into a common set of helpers and fix the endian
powerpc/powernv: Create OPAL sglist helper functions and fix endian issues
We have two copies of code that creates an OPAL sg list. Consolidate these into a common set of helpers and fix the endian issues.
The flash interface embedded a version number in the num_entries field, whereas the dump interface did did not. Since versioning wasn't added to the flash interface and it is impossible to add this in a backwards compatible way, just remove it.
Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
show more ...
|
#
cc146d1d |
| 23-Apr-2014 |
Anton Blanchard <anton@samba.org> |
powerpc/powernv: Fix little endian issues in OPAL flash code
With this patch I was able to update firmware on an LE kernel.
Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin
powerpc/powernv: Fix little endian issues in OPAL flash code
With this patch I was able to update firmware on an LE kernel.
Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
show more ...
|
Revision tags: v3.14, v3.14-rc8, v3.14-rc7, v3.14-rc6, v3.14-rc5, v3.14-rc4, v3.14-rc3, v3.14-rc2, v3.14-rc1, v3.13, v3.13-rc8, v3.13-rc7 |
|
#
bf16a4c2 |
| 02-Jan-2014 |
Vasant Hegde <hegdevasant@linux.vnet.ibm.com> |
powerpc/powernv: Increase candidate fw image size
At present we assume candidate image is <= 256MB. But in P8, candidate image size can go up to 750MB. Hence increasing candidate image max size to 1
powerpc/powernv: Increase candidate fw image size
At present we assume candidate image is <= 256MB. But in P8, candidate image size can go up to 750MB. Hence increasing candidate image max size to 1GB.
Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
show more ...
|
#
8faaaead |
| 07-Jan-2014 |
Masanari Iida <standby24x7@gmail.com> |
treewide: fix comments and printk msgs
This patch fixed several typo in printk from various part of kernel source.
Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Jiri Kosina <j
treewide: fix comments and printk msgs
This patch fixed several typo in printk from various part of kernel source.
Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
show more ...
|
Revision tags: v3.13-rc6, v3.13-rc5, v3.13-rc4, v3.13-rc3, v3.13-rc2, v3.13-rc1 |
|
#
7e1ce5a4 |
| 18-Nov-2013 |
Vasant Hegde <hegdevasant@linux.vnet.ibm.com> |
powerpc/powernv: Move SG list structure to header file
Move SG list and entry structure to header file so that it can be used in other places as well.
Signed-off-by: Vasant Hegde <hegdevasant@linux
powerpc/powernv: Move SG list structure to header file
Move SG list and entry structure to header file so that it can be used in other places as well.
Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
show more ...
|
Revision tags: v3.12, v3.12-rc7 |
|
#
50bd6153 |
| 24-Oct-2013 |
Vasant Hegde <hegdevasant@linux.vnet.ibm.com> |
powerpc/powernv: Code update interface
Code update interface for powernv platform. This provides sysfs interface to pass new image, validate, update and commit images.
This patch includes: - Belo
powerpc/powernv: Code update interface
Code update interface for powernv platform. This provides sysfs interface to pass new image, validate, update and commit images.
This patch includes: - Below OPAL APIs for code update - opal_validate_flash() - opal_manage_flash() - opal_update_flash()
- Create below sysfs files under /sys/firmware/opal - image : Interface to pass new FW image - validate_flash : Validate candidate image - manage_flash : Commit/Reject operations - update_flash : Flash new candidate image
Updating Image: "update_flash" is an interface to indicate flash new FW. It just passes image SG list to FW. Actual flashing is done during system reboot time.
Note: - SG entry format: I have kept version number to keep this list similar to what PAPR is defined.
Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
show more ...
|
Revision tags: v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4, v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7, v5.2.6, v5.2.5, v5.2.4, v5.2.3, v5.2.2, v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8, v5.1.7, v5.1.6 |
|
#
2874c5fd |
| 27-May-2019 |
Thomas Gleixner <tglx@linutronix.de> |
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152 Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it u
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152 Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v5.1.5, v5.1.4, v5.1.3, v5.1.2, v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11, v5.0.10, v5.0.9, v5.0.8, v5.0.7, v5.0.6, v5.0.5, v5.0.4, v5.0.3, v4.19.29, v5.0.2, v4.19.28, v5.0.1, v4.19.27, v5.0, v4.19.26, v4.19.25, v4.19.24, v4.19.23, v4.19.22, v4.19.21, v4.19.20, v4.19.19, v4.19.18, v4.19.17, v4.19.16, v4.19.15, v4.19.14, v4.19.13, v4.19.12, v4.19.11, v4.19.10, v4.19.9, v4.19.8, v4.19.7, v4.19.6, v4.19.5, v4.19.4, v4.18.20, v4.19.3, v4.18.19, v4.19.2, v4.18.18, v4.18.17, v4.19.1, v4.19, v4.18.16, v4.18.15, v4.18.14, v4.18.13, v4.18.12, v4.18.11, v4.18.10, v4.18.9, v4.18.7, v4.18.6, v4.18.5, v4.17.18, v4.18.4, v4.18.3, v4.17.17, v4.18.2, v4.17.16, v4.17.15, v4.18.1, v4.18, v4.17.14, v4.17.13, v4.17.12, v4.17.11, v4.17.10, v4.17.9, v4.17.8, v4.17.7, v4.17.6, v4.17.5, v4.17.4, v4.17.3, v4.17.2, v4.17.1, v4.17, v4.16 |
|
#
f2748bdf |
| 01-Apr-2018 |
Nicholas Piggin <npiggin@gmail.com> |
powerpc/powernv: Always stop secondaries before reboot/shutdown Currently powernv reboot and shutdown requests just leave secondaries to do their own things. This is undesirable because
powerpc/powernv: Always stop secondaries before reboot/shutdown Currently powernv reboot and shutdown requests just leave secondaries to do their own things. This is undesirable because they can trigger any number of watchdogs while waiting for reboot, but also we don't know what else they might be doing -- they might be causing trouble, trampling memory, etc. The opal scheduled flash update code already ran into watchdog problems due to flashing taking a long time, and it was fixed with 2196c6f1ed ("powerpc/powernv: Return secondary CPUs to firmware before FW update"), which returns secondaries to opal. It's been found that regular reboots can take over 10 seconds, which can result in the hard lockup watchdog firing, reboot: Restarting system [ 360.038896709,5] OPAL: Reboot request... Watchdog CPU:0 Hard LOCKUP Watchdog CPU:44 detected Hard LOCKUP other CPUS:16 Watchdog CPU:16 Hard LOCKUP watchdog: BUG: soft lockup - CPU#16 stuck for 3s! [swapper/16:0] This patch removes the special case for flash update, and calls smp_send_stop in all cases before calling reboot/shutdown. smp_send_stop could return CPUs to OPAL, the main reason not to is that the request could come from a NMI that interrupts OPAL code, so re-entry to OPAL can cause a number of problems. Putting secondaries into simple spin loops improves the chances of a successful reboot. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
show more ...
|
Revision tags: v4.15, v4.13.16, v4.14, v4.13.5, v4.13, v4.12, v4.10.17, v4.10.16, v4.10.15, v4.10.14, v4.10.13, v4.10.12, v4.10.11, v4.10.10, v4.10.9, v4.10.8, v4.10.7, v4.10.6, v4.10.5, v4.10.4, v4.10.3, v4.10.2, v4.10.1, v4.10 |
|
#
a0828cf5 |
| 19-Jan-2017 |
Markus Elfring <elfring@users.sourceforge.net> |
powerpc: Use sizeof(*foo) rather than sizeof(struct foo) It's slightly less error prone to use sizeof(*foo) rather than specifying the type. Signed-off-by: Markus Elfring <elfri
powerpc: Use sizeof(*foo) rather than sizeof(struct foo) It's slightly less error prone to use sizeof(*foo) rather than specifying the type. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> [mpe: Consolidate into one patch, rewrite change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
show more ...
|
#
8bfa42ab |
| 02-Aug-2017 |
Bhumika Goyal <bhumirks@gmail.com> |
powerpc: Add const to bin_attribute structures Declare bin_attribute structures as const as they are only passed as an argument to the function sysfs_create_bin_file. This argument is of
powerpc: Add const to bin_attribute structures Declare bin_attribute structures as const as they are only passed as an argument to the function sysfs_create_bin_file. This argument is of type const, so declare the structure as const. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
show more ...
|
Revision tags: v4.9, openbmc-4.4-20161121-1, v4.4.33, v4.4.32, v4.4.31, v4.4.30, v4.4.29, v4.4.28, v4.4.27, v4.7.10, openbmc-4.4-20161021-1, v4.7.9, v4.4.26, v4.7.8, v4.4.25, v4.4.24, v4.7.7, v4.8, v4.4.23, v4.7.6, v4.7.5, v4.4.22, v4.4.21, v4.7.4, v4.7.3, v4.4.20, v4.7.2, v4.4.19, openbmc-4.4-20160819-1, v4.7.1, v4.4.18, v4.4.17, openbmc-4.4-20160804-1, v4.4.16, v4.7, openbmc-4.4-20160722-1, openbmc-20160722-1, openbmc-20160713-1, v4.4.15, v4.6.4, v4.6.3, v4.4.14, v4.6.2, v4.4.13, openbmc-20160606-1, v4.6.1, v4.4.12, openbmc-20160521-1, v4.4.11, openbmc-20160518-1, v4.6, v4.4.10, openbmc-20160511-1, openbmc-20160505-1, v4.4.9, v4.4.8, v4.4.7, openbmc-20160329-2, openbmc-20160329-1, openbmc-20160321-1, v4.4.6, v4.5, v4.4.5, v4.4.4, v4.4.3, openbmc-20160222-1, v4.4.2, openbmc-20160212-1, openbmc-20160210-1, openbmc-20160202-2, openbmc-20160202-1, v4.4.1, openbmc-20160127-1, openbmc-20160120-1, v4.4, openbmc-20151217-1, openbmc-20151210-1, openbmc-20151202-1, openbmc-20151123-1, openbmc-20151118-1, openbmc-20151104-1, v4.3, openbmc-20151102-1, openbmc-20151028-1, v4.3-rc1, v4.2, v4.2-rc8, v4.2-rc7, v4.2-rc6, v4.2-rc5, v4.2-rc4, v4.2-rc3, v4.2-rc2, v4.2-rc1, v4.1, v4.1-rc8, v4.1-rc7, v4.1-rc6, v4.1-rc5, v4.1-rc4, v4.1-rc3, v4.1-rc2, v4.1-rc1, v4.0, v4.0-rc7 |
|
#
ed59190e |
| 01-Apr-2015 |
Cyril Bur <cyrilbur@gmail.com> |
powerpc/powernv: Add interfaces for flash device access This change adds the OPAL interface definitions to allow Linux to read, write and erase from system flash devices. We register pla
powerpc/powernv: Add interfaces for flash device access This change adds the OPAL interface definitions to allow Linux to read, write and erase from system flash devices. We register platform devices for the flash devices exported by firmware. We clash with the existing opal_flash_init function, which is really for the FSP flash update functionality, so we rename that initcall to opal_flash_update_init(). A future change will add an mtd driver that uses this interface. Changes from Joel Stanley and Jeremy Kerr. Signed-off-by: Cyril Bur <cyrilbur@gmail.com> Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Joel Stanley <joel@jms.id.au> Acked-by: Stewart Smith <stewart@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
show more ...
|
Revision tags: v4.0-rc6, v4.0-rc5, v4.0-rc4, v4.0-rc3, v4.0-rc2, v4.0-rc1 |
|
#
3f77df7f |
| 13-Feb-2015 |
Vasant Hegde <hegdevasant@linux.vnet.ibm.com> |
powerpc/powernv: Check image loaded or not before calling flash Present code checks for update_flash_data in opal_flash_term_callback(). update_flash_data has been statically initialized
powerpc/powernv: Check image loaded or not before calling flash Present code checks for update_flash_data in opal_flash_term_callback(). update_flash_data has been statically initialized to zero, and that is the value of FLASH_IMG_READY. Also code update initialization happens during subsys init. So if reboot is issued before the subsys init stage then we endup displaying "Flashing new firmware" message.. which may confuse end user. This patch fixes above described issue by initializes update_flash status to invalid state. Reported-by: Sam Bobroff <sam.bobroff@au1.ibm.com> Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
show more ...
|
Revision tags: v3.19, v3.19-rc7, v3.19-rc6, v3.19-rc5, v3.19-rc4, v3.19-rc3, v3.19-rc2, v3.19-rc1, v3.18, v3.18-rc7, v3.18-rc6, v3.18-rc5, v3.18-rc4, v3.18-rc3, v3.18-rc2, v3.18-rc1, v3.17, v3.17-rc7, v3.17-rc6, v3.17-rc5, v3.17-rc4, v3.17-rc3, v3.17-rc2, v3.17-rc1, v3.16, v3.16-rc7, v3.16-rc6, v3.16-rc5, v3.16-rc4, v3.16-rc3, v3.16-rc2, v3.16-rc1, v3.15 |
|
#
8b8f7bf4 |
| 04-Jun-2014 |
Vasant Hegde <hegdevasant@linux.vnet.ibm.com> |
powerpc/powernv: Pass buffer size to OPAL validate flash call We pass actual buffer size to opal_validate_flash() OPAL API call and in return it contains output buffer size. Com
powerpc/powernv: Pass buffer size to OPAL validate flash call We pass actual buffer size to opal_validate_flash() OPAL API call and in return it contains output buffer size. Commit cc146d1d (Fix little endian issues) missed to set the size param before making OPAL call. So firmware image validation fails. This patch sets size variable before making OPAL call. Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com> Tested-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
show more ...
|
Revision tags: v3.15-rc8, v3.15-rc7, v3.15-rc6, v3.15-rc5, v3.15-rc4, v3.15-rc3, v3.15-rc2, v3.15-rc1 |
|
#
2196c6f1 |
| 09-Apr-2014 |
Vasant Hegde <hegdevasant@linux.vnet.ibm.com> |
powerpc/powernv: Return secondary CPUs to firmware before FW update Firmware update on PowerNV platform takes several minutes. During this time one CPU is stuck in FW and the kernel comp
powerpc/powernv: Return secondary CPUs to firmware before FW update Firmware update on PowerNV platform takes several minutes. During this time one CPU is stuck in FW and the kernel complains about "soft lockups". This patch returns all secondary CPUs to firmware before starting firmware update process. [ Reworked a bit and cleaned up -- BenH ] Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
show more ...
|
#
3441f04b |
| 22-Apr-2014 |
Anton Blanchard <anton@samba.org> |
powerpc/powernv: Create OPAL sglist helper functions and fix endian issues We have two copies of code that creates an OPAL sg list. Consolidate these into a common set of helpers and fix
powerpc/powernv: Create OPAL sglist helper functions and fix endian issues We have two copies of code that creates an OPAL sg list. Consolidate these into a common set of helpers and fix the endian issues. The flash interface embedded a version number in the num_entries field, whereas the dump interface did did not. Since versioning wasn't added to the flash interface and it is impossible to add this in a backwards compatible way, just remove it. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
show more ...
|