powerpc/perf/hv-24x7: Update domain value check

Valid domain value is in range 1 to HV_PERF_DOMAIN_MAX. Current code has
check for domain value greater than or equal to HV_PERF_DOMAIN_MAX. But
the c

powerpc/perf/hv-24x7: Update domain value check

Valid domain value is in range 1 to HV_PERF_DOMAIN_MAX. Current code has
check for domain value greater than or equal to HV_PERF_DOMAIN_MAX. But
the check for domain value 0 is missing.

Fix this issue by adding check for domain value 0.

Before:
# ./perf stat -v -e hv_24x7/CPM_ADJUNCT_INST,domain=0,core=1/ sleep 1
Using CPUID 00800200
Control descriptor is not initialized
Error:
The sys_perf_event_open() syscall returned with 5 (Input/output error) for
event (hv_24x7/CPM_ADJUNCT_INST,domain=0,core=1/).
/bin/dmesg | grep -i perf may provide additional information.

Result from dmesg:
[ 37.819387] hv-24x7: hcall failed: [0 0x60040000 0x100 0] => ret
0xfffffffffffffffc (-4) detail=0x2000000 failing ix=0

After:
# ./perf stat -v -e hv_24x7/CPM_ADJUNCT_INST,domain=0,core=1/ sleep 1
Using CPUID 00800200
Control descriptor is not initialized
Warning:
hv_24x7/CPM_ADJUNCT_INST,domain=0,core=1/ event is not supported by the kernel.
failed to read counter hv_24x7/CPM_ADJUNCT_INST,domain=0,core=1/

Fixes: ebd4a5a3ebd9 ("powerpc/perf/hv-24x7: Minor improvements")
Reported-by: Krishan Gopal Sarawast <krishang@linux.vnet.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Tested-by: Disha Goel <disgoel@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230825055601.360083-1-kjain@linux.ibm.com

show more ...

powerpc/pseries/hv-24x7: convert to papr_sysparm API

The new papr_sysparm API handles the details of system parameter
retrieval. Use that instead of open-coding the RTAS call, work area
management,

powerpc/pseries/hv-24x7: convert to papr_sysparm API

The new papr_sysparm API handles the details of system parameter
retrieval. Use that instead of open-coding the RTAS call, work area
management, and retries.

Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230125-b4-powerpc-rtas-queue-v3-17-26929c8cce78@linux.ibm.com

show more ...

powerpc/perf/hv-24x7: add missing RTAS retry status handling

The ibm,get-system-parameter RTAS function may return -2 or 990x,
which indicate that the caller should try again. read_24x7_sys_info()
i

powerpc/perf/hv-24x7: add missing RTAS retry status handling

The ibm,get-system-parameter RTAS function may return -2 or 990x,
which indicate that the caller should try again. read_24x7_sys_info()
ignores this, allowing transient failures in reporting processor
module information.

Move the RTAS call into a coventional rtas_busy_delay()-based loop,
along with the parsing of results on success.

Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Fixes: 8ba214267382 ("powerpc/hv-24x7: Add rtas call in hv-24x7 driver to get processor details")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230125-b4-powerpc-rtas-queue-v3-2-26929c8cce78@linux.ibm.com

show more ...

powerpc/hv-24x7: Fix pvr check when setting interface version

Commit ec3eb9d941a9 ("powerpc/perf: Use PVR rather than
oprofile field to determine CPU version") added usage
of pvr value instead of op

powerpc/hv-24x7: Fix pvr check when setting interface version

Commit ec3eb9d941a9 ("powerpc/perf: Use PVR rather than
oprofile field to determine CPU version") added usage
of pvr value instead of oprofile field to determine the
platform. In hv-24x7 pmu driver code, pvr check uses PVR_POWER8
when assigning the interface version for power8 platform.
But power8 can also have other pvr values like PVR_POWER8E and
PVR_POWER8NVL. Hence the interface version won't be set
properly incase of PVR_POWER8E and PVR_POWER8NVL.
Fix this issue by adding the checks for PVR_POWER8E and
PVR_POWER8NVL as well.

Fixes: ec3eb9d941a9 ("powerpc/perf: Use PVR rather than oprofile field to determine CPU version")
Reported-by: Sachin Sant <sachinp@linux.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230131184804.220756-1-kjain@linux.ibm.com

show more ...

powerpc/perf: Use PVR rather than oprofile field to determine CPU version

Currently the perf CPU backend drivers detect what CPU they're on using
cur_cpu_spec->oprofile_cpu_type.

Although that work

powerpc/perf: Use PVR rather than oprofile field to determine CPU version

Currently the perf CPU backend drivers detect what CPU they're on using
cur_cpu_spec->oprofile_cpu_type.

Although that works, it's a bit crufty to be using oprofile related fields,
especially seeing as oprofile is more or less unused these days.

It also means perf is reliant on the fragile logic in setup_cpu_spec()
which detects when we're using a logical PVR and copies back the PMU
related fields from the raw CPU entry. So lets check the PVR directly.

Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Rashmica Gupta <rashmica.g@gmail.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
[chleroy: Added power10 and fixed checkpatch issues]
Reviewed-and-tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Reviewed-and-tested-By: Kajol Jain <kjain@linux.ibm.com> [For 24x7 side changes]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20c0ee7f99dbf0dbf8658df6b39f84753e6db1ef.1657204631.git.christophe.leroy@csgroup.eu

show more ...

powerpc/perf/24x7: use 'unsigned int' instead of 'unsigned'

Replace the 'unsigned' with 'unsigned int' which is more accurate.

Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
[chleroy: Fixed pare

powerpc/perf/24x7: use 'unsigned int' instead of 'unsigned'

Replace the 'unsigned' with 'unsigned int' which is more accurate.

Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
[chleroy: Fixed parenthesis alignment]
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210729115252.40895-1-wangborong@cdjrlc.com

show more ...

powerpc: declare unmodified attribute_group usages const

Inspired by (bd75b4ef4977: Constify static attribute_group structs),
accepted by linux-next, reported:
https://patchwork.ozlabs.org/project/l

powerpc: declare unmodified attribute_group usages const

Inspired by (bd75b4ef4977: Constify static attribute_group structs),
accepted by linux-next, reported:
https://patchwork.ozlabs.org/project/linuxppc-dev/patch/20220210202805.7750-4-rikard.falkeborn@gmail.com/

Nearly all singletons of type struct attribute_group are never modified,
and so are candidates for being const. Declare them as const.

Signed-off-by: Rohan McLure <rmclure@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220307231414.86560-1-rmclure@linux.ibm.com

show more ...

powerpc/perf: Fix spelling of "its"

Use the possessive "its" instead of the contraction of "it is" (it's).

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Michael Ellerman <mpe@e

powerpc/perf: Fix spelling of "its"

Use the possessive "its" instead of the contraction of "it is" (it's).

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211223003942.22098-1-rdunlap@infradead.org

show more ...

powerpc/perf/hv-24x7: Make some symbols static

The sparse tool complains as follows:

arch/powerpc/perf/hv-24x7.c:229:1: warning:
symbol '__pcpu_scope_hv_24x7_txn_flags' was not declared. Should it

powerpc/perf/hv-24x7: Make some symbols static

The sparse tool complains as follows:

arch/powerpc/perf/hv-24x7.c:229:1: warning:
symbol '__pcpu_scope_hv_24x7_txn_flags' was not declared. Should it be static?
arch/powerpc/perf/hv-24x7.c:230:1: warning:
symbol '__pcpu_scope_hv_24x7_txn_err' was not declared. Should it be static?
arch/powerpc/perf/hv-24x7.c:236:1: warning:
symbol '__pcpu_scope_hv_24x7_hw' was not declared. Should it be static?
arch/powerpc/perf/hv-24x7.c:244:1: warning:
symbol '__pcpu_scope_hv_24x7_reqb' was not declared. Should it be static?
arch/powerpc/perf/hv-24x7.c:245:1: warning:
symbol '__pcpu_scope_hv_24x7_resb' was not declared. Should it be static?

This symbol is not used outside of hv-24x7.c, so this
commit marks it static.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Bixuan Cui <cuibixuan@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210409090124.59492-1-cuibixuan@huawei.com

show more ...

powerpc/perf/hv-24x7: Dont create sysfs event files for dummy events

The hv_24x7 performance monitoring unit creates a list of supported
events from the event catalog obtained via HCALL. The hv_24x7

powerpc/perf/hv-24x7: Dont create sysfs event files for dummy events

The hv_24x7 performance monitoring unit creates a list of supported
events from the event catalog obtained via HCALL. The hv_24x7 catalog
could also contain invalid or dummy events with names like RESERVED*.
These events do not have any hardware counters backing them. Add a
check to string compare the event names to filter such events out.

Result on power9 machine:

Before this patch:
.....
hv_24x7/PM_XLINK2_OUT_ODD_CYC,chip=?/ [Kernel PMU event]
hv_24x7/PM_XLINK2_OUT_ODD_DATA_COUNT,chip=?/ [Kernel PMU event]
hv_24x7/PM_XLINK2_OUT_ODD_TOTAL_UTIL,chip=?/ [Kernel PMU event]
hv_24x7/PM_XTS_ATR_DEMAND_CHECKOUT,chip=?/ [Kernel PMU event]
hv_24x7/PM_XTS_ATR_DEMAND_CHECKOUT_MISS,chip=?/ [Kernel PMU event]
hv_24x7/PM_XTS_ATSD_SENT,chip=?/ [Kernel PMU event]
hv_24x7/PM_XTS_ATSD_TLBI_RCV,chip=?/ [Kernel PMU event]
hv_24x7/RESERVED_NEST1,chip=?/ [Kernel PMU event]
hv_24x7/RESERVED_NEST10,chip=?/ [Kernel PMU event]
hv_24x7/RESERVED_NEST11,chip=?/ [Kernel PMU event]
hv_24x7/RESERVED_NEST12,chip=?/ [Kernel PMU event]
hv_24x7/RESERVED_NEST13,chip=?/ [Kernel PMU event]
......

dmesg:
[ 0.000362] printk: console [hvc0] enabled
[ 0.815452] hv-24x7: read 1530 catalog entries, created 537 event attrs (0 failures), 275 descs

After this patch:
......
hv_24x7/PM_XLINK2_OUT_ODD_AVLBL_CYC,chip=?/ [Kernel PMU event]
hv_24x7/PM_XLINK2_OUT_ODD_CYC,chip=?/ [Kernel PMU event]
hv_24x7/PM_XLINK2_OUT_ODD_DATA_COUNT,chip=?/ [Kernel PMU event]
hv_24x7/PM_XLINK2_OUT_ODD_TOTAL_UTIL,chip=?/ [Kernel PMU event]
hv_24x7/PM_XTS_ATR_DEMAND_CHECKOUT,chip=?/ [Kernel PMU event]
hv_24x7/PM_XTS_ATR_DEMAND_CHECKOUT_MISS,chip=?/ [Kernel PMU event]
hv_24x7/PM_XTS_ATSD_SENT,chip=?/ [Kernel PMU event]
hv_24x7/PM_XTS_ATSD_TLBI_RCV,chip=?/ [Kernel PMU event]
hv_24x7/TOD,chip=?/ [Kernel PMU event]
......

dmesg:
[ 0.000357] printk: console [hvc0] enabled
[ 0.808592] hv-24x7: read 1530 catalog entries, created 509 event attrs (0 failures), 275 descs

Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
[mpe: Simplify ignore_event(), minor change log formatting]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201228085204.18026-1-kjain@linux.ibm.com

show more ...

powerpc/perf/hv-24x7: Move cpumask file to top folder of hv-24x7 driver

Commit 792f73f747b8 ("powerpc/hv-24x7: Add sysfs files inside hv-24x7
device to show cpumask") added cpumask file as part of h

powerpc/perf/hv-24x7: Move cpumask file to top folder of hv-24x7 driver

Commit 792f73f747b8 ("powerpc/hv-24x7: Add sysfs files inside hv-24x7
device to show cpumask") added cpumask file as part of hv-24x7 driver
inside the interface folder. The cpumask file is supposed to be in the
top folder of the PMU driver in order to make hotplug work.

This patch fixes that issue and creates new group 'cpumask_attr_group'
to add cpumask file and make sure it added in top folder.

command:# cat /sys/devices/hv_24x7/cpumask
0

Fixes: 792f73f747b8 ("powerpc/hv-24x7: Add sysfs files inside hv-24x7 device to show cpumask")
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200821080610.123997-1-kjain@linux.ibm.com

show more ...

powerpc/hv-24x7: Add sysfs files inside hv-24x7 device to show cpumask

Patch here adds a cpumask attr to hv_24x7 pmu along with ABI documentation.

Primary use to expose the cpumask is for the perf

powerpc/hv-24x7: Add sysfs files inside hv-24x7 device to show cpumask

Patch here adds a cpumask attr to hv_24x7 pmu along with ABI documentation.

Primary use to expose the cpumask is for the perf tool which has the
capability to parse the driver sysfs folder and understand the
cpumask file. Having cpumask file will reduce the number of perf command
line parameters (will avoid "-C" option in the perf tool
command line). It can also notify the user which is
the current cpu used to retrieve the counter data.

command:# cat /sys/devices/hv_24x7/interface/cpumask
0

Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Reviewed-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709051836.723765-3-kjain@linux.ibm.com

show more ...

powerpc/perf/hv-24x7: Add cpu hotplug support

Patch here adds cpu hotplug functions to hv_24x7 pmu.
A new cpuhp_state "CPUHP_AP_PERF_POWERPC_HV_24x7_ONLINE" enum
is added.

The online callback funct

powerpc/perf/hv-24x7: Add cpu hotplug support

Patch here adds cpu hotplug functions to hv_24x7 pmu.
A new cpuhp_state "CPUHP_AP_PERF_POWERPC_HV_24x7_ONLINE" enum
is added.

The online callback function updates the cpumask only if its
empty. As the primary intention of adding hotplug support
is to designate a CPU to make HCALL to collect the
counter data.

The offline function test and clear corresponding cpu in a cpumask
and update cpumask to any other active cpu.

Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709051836.723765-2-kjain@linux.ibm.com

show more ...

powerpc/hv-24x7: Add sysfs files inside hv-24x7 device to show processor details

To expose the system dependent parameter like total number of
sockets and numbers of chips per socket, patch adds two

powerpc/hv-24x7: Add sysfs files inside hv-24x7 device to show processor details

To expose the system dependent parameter like total number of
sockets and numbers of chips per socket, patch adds two sysfs files.
"sockets" and "chips" are added to /sys/devices/hv_24x7/interface/
of the "hv_24x7" pmu.

Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200525104308.9814-4-kjain@linux.ibm.com

show more ...

powerpc/hv-24x7: Add rtas call in hv-24x7 driver to get processor details

For hv_24x7 socket/chip level events, specific chip-id to which
the data requested should be added as part of pmu events.
Bu

powerpc/hv-24x7: Add rtas call in hv-24x7 driver to get processor details

For hv_24x7 socket/chip level events, specific chip-id to which
the data requested should be added as part of pmu events.
But number of chips/socket in the system details are not exposed.

Patch implements read_24x7_sys_info() to get system parameter values
like number of sockets, cores per chip and chips per socket. Rtas_call
with token "PROCESSOR_MODULE_INFO" is used to get these values.

Subsequent patch exports these values via sysfs.

Patch also make these parameters default to 1.

Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200525104308.9814-3-kjain@linux.ibm.com

show more ...

powerpc/perf/hv-24x7: Fix inconsistent output values incase multiple hv-24x7 events run

Commit 2b206ee6b0df ("powerpc/perf/hv-24x7: Display change in counter
values")' added to print _change_ in the

powerpc/perf/hv-24x7: Fix inconsistent output values incase multiple hv-24x7 events run

Commit 2b206ee6b0df ("powerpc/perf/hv-24x7: Display change in counter
values")' added to print _change_ in the counter value rather then raw
value for 24x7 counters. Incase of transactions, the event count
is set to 0 at the beginning of the transaction. It also sets
the event's prev_count to the raw value at the time of initialization.
Because of setting event count to 0, we are seeing some weird behaviour,
whenever we run multiple 24x7 events at a time.

For example:

command#: ./perf stat -e "{hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/,
hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/}"
-C 0 -I 1000 sleep 100

1.000121704 120 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/
1.000121704 5 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/
2.000357733 8 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/
2.000357733 10 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/
3.000495215 18,446,744,073,709,551,616 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/
3.000495215 18,446,744,073,709,551,616 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/
4.000641884 56 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/
4.000641884 18,446,744,073,709,551,616 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/
5.000791887 18,446,744,073,709,551,616 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/

Getting these large values in case we do -I.

As we are setting event_count to 0, for interval case, overall event_count is not
coming in incremental order. As we may can get new delta lesser then previous count.
Because of which when we print intervals, we are getting negative value which create
these large values.

This patch removes part where we set event_count to 0 in function
'h_24x7_event_read'. There won't be much impact as we do set event->hw.prev_count
to the raw value at the time of initialization to print change value.

With this patch
In power9 platform

command#: ./perf stat -e "{hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/,
hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/}"
-C 0 -I 1000 sleep 100

1.000117685 93 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/
1.000117685 1 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/
2.000349331 98 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/
2.000349331 2 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/
3.000495900 131 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/
3.000495900 4 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/
4.000645920 204 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/
4.000645920 61 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/
4.284169997 22 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/

Suggested-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Tested-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200525104308.9814-2-kjain@linux.ibm.com

show more ...

powerpc/perf/24x7: use rb_entry

To make the code clearer, use rb_entry() instead of container_of() to
deal with rbtree.

Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Michael El

powerpc/perf/24x7: use rb_entry

To make the code clearer, use rb_entry() instead of container_of() to
deal with rbtree.

Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

show more ...

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of th

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 3029 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

perf/core, arch/powerpc: use PERF_PMU_CAP_NO_EXCLUDE for exclusion incapable PMUs

For PowerPC PMUs that do not support context exclusion let's
advertise the PERF_PMU_CAP_NO_EXCLUDE capability. This

perf/core, arch/powerpc: use PERF_PMU_CAP_NO_EXCLUDE for exclusion incapable PMUs

For PowerPC PMUs that do not support context exclusion let's
advertise the PERF_PMU_CAP_NO_EXCLUDE capability. This ensures that
perf will prevent us from handling events where any exclusion flags
are set. Let's also remove the now unnecessary check for exclusion
flags.

Signed-off-by: Andrew Murray <andrew.murray@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: robin.murphy@arm.com
Cc: suzuki.poulose@arm.com
Link: https://lkml.kernel.org/r/1547128414-50693-10-git-send-email-andrew.murray@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

show more ...

powerpc/perf/hv-24x7: Fix incorrect comparison in memord

In the hv-24x7 code there is a function memord() which tries to
implement a sort function return -1, 0, 1. However one of the
conditions is i

powerpc/perf/hv-24x7: Fix incorrect comparison in memord

In the hv-24x7 code there is a function memord() which tries to
implement a sort function return -1, 0, 1. However one of the
conditions is incorrect, such that it can never be true, because we
will have already returned.

I don't believe there is a bug in practice though, because the
comparisons are an optimisation prior to calling memcmp().

Fix it by swapping the second comparision, so it can be true.

Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

show more ...

powerpc/perf/hv-24x7: Aggregate result elements on POWER9 SMT8

On POWER9 SMT8 the 24x7 API returns two result elements for physical core
and virtual CPU events and we need to add their counts to get

powerpc/perf/hv-24x7: Aggregate result elements on POWER9 SMT8

On POWER9 SMT8 the 24x7 API returns two result elements for physical core
and virtual CPU events and we need to add their counts to get the final
result.

Reviewed-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

show more ...

powerpc/perf/hv-24x7: Support v2 of the hypervisor API

POWER9 introduces a new version of the hypervisor API to access the 24x7
perf counters. The new version changed some of the structures used for

powerpc/perf/hv-24x7: Support v2 of the hypervisor API

POWER9 introduces a new version of the hypervisor API to access the 24x7
perf counters. The new version changed some of the structures used for
requests and results.

Signed-off-by: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

show more ...

powerpc/perf/hv-24x7: Minor improvements

There's an H24x7_DATA_BUFFER_SIZE constant, so use it in init_24x7_request.

There's also an HV_PERF_DOMAIN_MAX constant, so use it in
h_24x7_event_init. Thi

powerpc/perf/hv-24x7: Minor improvements

There's an H24x7_DATA_BUFFER_SIZE constant, so use it in init_24x7_request.

There's also an HV_PERF_DOMAIN_MAX constant, so use it in
h_24x7_event_init. This makes the comment above the check redundant,
so remove it.

In add_event_to_24x7_request, a statement is terminated with a comma
instead of a semicolon. Fix it.

In hv-24x7.h, improve comments in struct hv_24x7_result.

Signed-off-by: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

show more ...

powerpc/perf/hv-24x7: Fix return value of hcalls

The H_GET_24X7_CATALOG_PAGE hcall can return a signed error code, so fix
this in the code.

The H_GET_24X7_DATA hcall can return a signed error code,

powerpc/perf/hv-24x7: Fix return value of hcalls

The H_GET_24X7_CATALOG_PAGE hcall can return a signed error code, so fix
this in the code.

The H_GET_24X7_DATA hcall can return a signed error code, so fix this in
the code. Also, don't truncate it to 32 bit to use as return value for
make_24x7_request. In case of error h_24x7_event_commit_txn passes that
return value to generic code, so it should be a proper errno. The other
caller of make_24x7_request is single_24x7_request, whose callers don't
actually care which error code is returned so they are not affected by this
change.

Finally, h_24x7_get_value doesn't use the error code from
single_24x7_request, so there's no need to store it.

Reviewed-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

show more ...

powerpc-perf/hx-24x7: Don't log failed hcall twice

make_24x7_request already calls log_24x7_hcall if it fails, so callers
don't have to do it again.

In fact, since the latter is now only called fro

powerpc-perf/hx-24x7: Don't log failed hcall twice

make_24x7_request already calls log_24x7_hcall if it fails, so callers
don't have to do it again.

In fact, since the latter is now only called from the former, there's no
need for a separate log_24x7_hcall anymore so remove it.

Reviewed-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

show more ...