nmi_backtrace: allow excluding an arbitrary CPU

The APIs that allow backtracing across CPUs have always had a way to
exclude the current CPU. This convenience means callers didn't need to
find a pl

nmi_backtrace: allow excluding an arbitrary CPU

The APIs that allow backtracing across CPUs have always had a way to
exclude the current CPU. This convenience means callers didn't need to
find a place to allocate a CPU mask just to handle the common case.

Let's extend the API to take a CPU ID to exclude instead of just a
boolean. This isn't any more complex for the API to handle and allows the
hardlockup detector to exclude a different CPU (the one it already did a
trace for) without needing to find space for a CPU mask.

Arguably, this new API also encourages safer behavior. Specifically if
the caller wants to avoid tracing the current CPU (maybe because they
already traced the current CPU) this makes it more obvious to the caller
that they need to make sure that the current CPU ID can't change.

[akpm@linux-foundation.org: fix trigger_allbutcpu_cpu_backtrace() stub]
Link: https://lkml.kernel.org/r/20230804065935.v4.1.Ia35521b91fc781368945161d7b28538f9996c182@changeid
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: kernel test robot <lkp@intel.com>
Cc: Lecopzer Chen <lecopzer.chen@mediatek.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Pingfan Liu <kernelfans@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

show more ...

powerpc: move arch_trigger_cpumask_backtrace from nmi.h to irq.h

The powerpc architecture was the only one that defined
arch_trigger_cpumask_backtrace() in asm/nmi.h instead of
asm/irq.h. Move it to

powerpc: move arch_trigger_cpumask_backtrace from nmi.h to irq.h

The powerpc architecture was the only one that defined
arch_trigger_cpumask_backtrace() in asm/nmi.h instead of
asm/irq.h. Move it to be consistent.

This fixes compile time errors introduced by commit 7ca8fe94aa92
("watchdog/hardlockup: define HARDLOCKUP_DETECTOR_ARCH"). That commit
caused <asm/nmi.h> to stop being included if the hardlockup detector
wasn't enabled. The specific errors were:
error: implicit declaration of function `nmi_cpu_backtrace'
error: implicit declaration of function `nmi_trigger_cpumask_backtrace'

NOTE: when moving this into irq.h, we also change the guards from just
checking if "CONFIG_NMI_IPI" is defined to also checking if
"CONFIG_PPC_BOOK3S_64" is defined. This matches the code in
arch/powerpc/kernel/stacktrace.c. Previously this worked because
<asm.nmi.h> was included if "CONFIG_HAVE_HARDLOCKUP_DETECTOR_ARCH" was
defined. For powerpc that's only selected if "CONFIG_PPC_BOOK3S_64" is
defined.

[dianders@chromium.org: change the guards to include CONFIG_PPC_BOOK3S_64]
Link: https://lkml.kernel.org/r/20230622202816.v2.1.Ice67126857506712559078e7de26d32d26e64631@changeid
Link: https://lkml.kernel.org/r/20230621164809.1.Ice67126857506712559078e7de26d32d26e64631@changeid
Fixes: 7ca8fe94aa92 ("watchdog/hardlockup: define HARDLOCKUP_DETECTOR_ARCH")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Closes: https://lore.kernel.org/r/871qi5otdh.fsf@mail.lhotse
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Laurent Dufour <ldufour@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Tom Rix <trix@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

show more ...

init: consolidate prototypes in linux/init.h

The init/main.c file contains some extern declarations for functions
defined in architecture code, and it defines some other functions that are
called fr

init: consolidate prototypes in linux/init.h

The init/main.c file contains some extern declarations for functions
defined in architecture code, and it defines some other functions that are
called from architecture code with a custom prototype. Both of those
result in warnings with 'make W=1':

init/calibrate.c:261:37: error: no previous prototype for 'calibrate_delay_is_known' [-Werror=missing-prototypes]
init/main.c:790:20: error: no previous prototype for 'mem_encrypt_init' [-Werror=missing-prototypes]
init/main.c:792:20: error: no previous prototype for 'poking_init' [-Werror=missing-prototypes]
arch/arm64/kernel/irq.c:122:13: error: no previous prototype for 'init_IRQ' [-Werror=missing-prototypes]
arch/arm64/kernel/time.c:55:13: error: no previous prototype for 'time_init' [-Werror=missing-prototypes]
arch/x86/kernel/process.c:935:13: error: no previous prototype for 'arch_post_acpi_subsys_init' [-Werror=missing-prototypes]
init/calibrate.c:261:37: error: no previous prototype for 'calibrate_delay_is_known' [-Werror=missing-prototypes]
kernel/fork.c:991:20: error: no previous prototype for 'arch_task_cache_init' [-Werror=missing-prototypes]

Add prototypes for all of these in include/linux/init.h or another
appropriate header, and remove the duplicate declarations from
architecture specific code.

[sfr@canb.auug.org.au: declare time_init_early()]
Link: https://lkml.kernel.org/r/20230519124311.5167221c@canb.auug.org.au
Link: https://lkml.kernel.org/r/20230517131102.934196-12-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Eric Paris <eparis@redhat.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <longman@redhat.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

show more ...

powerpc: Check !irq instead of irq == NO_IRQ and remove NO_IRQ

NO_IRQ is a relic from the old days. It is not used anymore in core
functions. By the way, function irq_of_parse_and_map() returns valu

powerpc: Check !irq instead of irq == NO_IRQ and remove NO_IRQ

NO_IRQ is a relic from the old days. It is not used anymore in core
functions. By the way, function irq_of_parse_and_map() returns value 0
on error.

In some drivers, NO_IRQ is erroneously used to check the return of
irq_of_parse_and_map().

It is not a real bug today because the only architectures using the
drivers being fixed by this patch define NO_IRQ as 0, but there are
architectures which define NO_IRQ as -1. If one day those
architectures start using the non fixed drivers, there will be a
problem.

Long time ago Linus advocated for not using NO_IRQ, see
https://lore.kernel.org/all/Pine.LNX.4.64.0511211150040.13959@g5.osdl.org

He re-iterated the same view recently in
https://lore.kernel.org/all/CAHk-=wg2Pkb9kbfbstbB91AJA2SF6cySbsgHG-iQMq56j3VTcA@mail.gmail.com

So test !irq instead of tesing irq == NO_IRQ.

All other usage of NO_IRQ for powerpc were removed in previous cycles so
the time has come to remove NO_IRQ completely for powerpc.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/4b8d4f96140af01dec3a3330924dda8b2451c316.1674476798.git.christophe.leroy@csgroup.eu

show more ...

powerpc/irq: Make __do_irq() static

Since commit 48cf12d88969 ("powerpc/irq: Inline call_do_irq() and
call_do_softirq()"), __do_irq() is not used outside irq.c

Reorder functions and make __do_irq()

powerpc/irq: Make __do_irq() static

Since commit 48cf12d88969 ("powerpc/irq: Inline call_do_irq() and
call_do_softirq()"), __do_irq() is not used outside irq.c

Reorder functions and make __do_irq() static and
drop the declaration in irq.h.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/adbe1c8315ec2d63259f41468e82e51677bb1eda.1654769775.git.christophe.leroy@csgroup.eu

show more ...

powerpc/config: Add CONFIG_BOOKE_OR_40x

We have many functionnalities common to 40x and BOOKE, it leads to
many places with #if defined(CONFIG_BOOKE) || defined(CONFIG_40x).

We are going to add a f

powerpc/config: Add CONFIG_BOOKE_OR_40x

We have many functionnalities common to 40x and BOOKE, it leads to
many places with #if defined(CONFIG_BOOKE) || defined(CONFIG_40x).

We are going to add a few more with KUAP for booke/40x, so create
a new symbol which is defined when either BOOKE or 40x is defined.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/9a3dbd60924cb25c9f944d3d8205ac5a0d15e229.1634627931.git.christophe.leroy@csgroup.eu

show more ...

powerpc/interrupt: Fix OOPS by not calling do_IRQ() from timer_interrupt()

An interrupt handler shall not be called from another interrupt
handler otherwise this leads to problems like the following

powerpc/interrupt: Fix OOPS by not calling do_IRQ() from timer_interrupt()

An interrupt handler shall not be called from another interrupt
handler otherwise this leads to problems like the following:

Kernel attempted to write user page (afd4fa84) - exploit attempt? (uid: 1000)
------------[ cut here ]------------
Bug: Write fault blocked by KUAP!
WARNING: CPU: 0 PID: 1617 at arch/powerpc/mm/fault.c:230 do_page_fault+0x484/0x720
Modules linked in:
CPU: 0 PID: 1617 Comm: sshd Tainted: G W 5.13.0-pmac-00010-g8393422eb77 #7
NIP: c001b77c LR: c001b77c CTR: 00000000
REGS: cb9e5bc0 TRAP: 0700 Tainted: G W (5.13.0-pmac-00010-g8393422eb77)
MSR: 00021032 <ME,IR,DR,RI> CR: 24942424 XER: 00000000

GPR00: c001b77c cb9e5c80 c1582c00 00000021 3ffffbff 085b0000 00000027 c8eb644c
GPR08: 00000023 00000000 00000000 00000000 24942424 0063f8c8 00000000 000186a0
GPR16: afd52dd4 afd52dd0 afd52dcc afd52dc8 0065a990 c07640c4 cb9e5e98 cb9e5e90
GPR24: 00000040 afd4fa96 00000040 02000000 c1fda6c0 afd4fa84 00000300 cb9e5cc0
NIP [c001b77c] do_page_fault+0x484/0x720
LR [c001b77c] do_page_fault+0x484/0x720
Call Trace:
[cb9e5c80] [c001b77c] do_page_fault+0x484/0x720 (unreliable)
[cb9e5cb0] [c000424c] DataAccess_virt+0xd4/0xe4
--- interrupt: 300 at __copy_tofrom_user+0x110/0x20c
NIP: c001f9b4 LR: c03250a0 CTR: 00000004
REGS: cb9e5cc0 TRAP: 0300 Tainted: G W (5.13.0-pmac-00010-g8393422eb77)
MSR: 00009032 <EE,ME,IR,DR,RI> CR: 48028468 XER: 20000000
DAR: afd4fa84 DSISR: 0a000000
GPR00: 20726f6f cb9e5d80 c1582c00 00000004 cb9e5e3a 00000016 afd4fa80 00000000
GPR08: 3835202d 72777872 2d78722d 00000004 28028464 0063f8c8 00000000 000186a0
GPR16: afd52dd4 afd52dd0 afd52dcc afd52dc8 0065a990 c07640c4 cb9e5e98 cb9e5e90
GPR24: 00000040 afd4fa96 00000040 cb9e5e0c 00000daa a0000000 cb9e5e98 afd4fa56
NIP [c001f9b4] __copy_tofrom_user+0x110/0x20c
LR [c03250a0] _copy_to_iter+0x144/0x990
--- interrupt: 300
[cb9e5d80] [c03e89c0] n_tty_read+0xa4/0x598 (unreliable)
[cb9e5df0] [c03e2a0c] tty_read+0xdc/0x2b4
[cb9e5e80] [c0156bf8] vfs_read+0x274/0x340
[cb9e5f00] [c01571ac] ksys_read+0x70/0x118
[cb9e5f30] [c0016048] ret_from_syscall+0x0/0x28
--- interrupt: c00 at 0xa7855c88
NIP: a7855c88 LR: a7855c5c CTR: 00000000
REGS: cb9e5f40 TRAP: 0c00 Tainted: G W (5.13.0-pmac-00010-g8393422eb77)
MSR: 0000d032 <EE,PR,ME,IR,DR,RI> CR: 2402446c XER: 00000000

GPR00: 00000003 afd4ec70 a72137d0 0000000b afd4ecac 00004000 0065a990 00000800
GPR08: 00000000 a7947930 00000000 00000004 c15831b0 0063f8c8 00000000 000186a0
GPR16: afd52dd4 afd52dd0 afd52dcc afd52dc8 0065a990 0065a9e0 00000001 0065fac0
GPR24: 00000000 00000089 00664050 00000000 00668e30 a720c8dc a7943ff4 0065f9b0
NIP [a7855c88] 0xa7855c88
LR [a7855c5c] 0xa7855c5c
--- interrupt: c00
Instruction dump:
3884aa88 38630178 48076861 807f0080 48042e45 2f830000 419e0148 3c80c079
3c60c076 38841be4 386301c0 4801f705 <0fe00000> 3860000b 4bfffe30 3c80c06b
---[ end trace fd69b91a8046c2e5 ]---

Here the problem is that by re-enterring an exception handler,
kuap_save_and_lock() is called a second time with this time KUAP
access locked, leading to regs->kuap being overwritten hence
KUAP not being unlocked at exception exit as expected.

Do not call do_IRQ() from timer_interrupt() directly. Instead,
redefine do_IRQ() as a standard function named __do_IRQ(), and
call it from both do_IRQ() and time_interrupt() handlers.

Fixes: 3a96570ffceb ("powerpc: convert interrupt handlers to use wrappers")
Cc: stable@vger.kernel.org # v5.12+
Reported-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/c17d234f4927d39a1d7100864a8e1145323d33a0.1628611927.git.christophe.leroy@csgroup.eu

show more ...

powerpc: Drop dependency between asm/irq.h and linux/irqdomain.h

Directly including linux/irqdomain.h was hiding all sort of sins,
which have now been fixed. Drop the spurious include.

Signed-off-b

powerpc: Drop dependency between asm/irq.h and linux/irqdomain.h

Directly including linux/irqdomain.h was hiding all sort of sins,
which have now been fixed. Drop the spurious include.

Signed-off-by: Marc Zyngier <maz@kernel.org>

show more ...

powerpc: Convert irq_domain_add_legacy_isa use to irq_domain_add_legacy

irq_domain_add_legacy_isa is a pain. It only exists for the benefit of
two PPC-specific drivers, and creates an ugly dependenc

powerpc: Convert irq_domain_add_legacy_isa use to irq_domain_add_legacy

irq_domain_add_legacy_isa is a pain. It only exists for the benefit of
two PPC-specific drivers, and creates an ugly dependency between asm/irq.h
and linux/irqdomain.h

Instead, let's convert these two drivers to irq_domain_add_legacy(),
stop using NUM_ISA_INTERRUPTS by directly setting NR_IRQS_LEGACY.

The dependency cannot be broken yet as there is a lot of PPC-related
code that depends on it, but that's the first step towards it.

A followup patch will remove irq_domain_add_legacy_isa.

Signed-off-by: Marc Zyngier <maz@kernel.org>

show more ...

powerpc/irq: Inline call_do_irq() and call_do_softirq()

call_do_irq() and call_do_softirq() are simple enough to be
worth inlining.

Inlining them avoids an mflr/mtlr pair plus a save/reload on stac

powerpc/irq: Inline call_do_irq() and call_do_softirq()

call_do_irq() and call_do_softirq() are simple enough to be
worth inlining.

Inlining them avoids an mflr/mtlr pair plus a save/reload on stack.

This is inspired from S390 arch. Several other arches do more or
less the same. The way sparc arch does seems odd thought.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210320122227.345427-1-mpe@ellerman.id.au

show more ...

softirq: Move __ARCH_HAS_DO_SOFTIRQ to Kconfig

To prepare for inlining do_softirq_own_stack() replace
__ARCH_HAS_DO_SOFTIRQ with a Kconfig switch and select it in the affected
architectures.

This a

softirq: Move __ARCH_HAS_DO_SOFTIRQ to Kconfig

To prepare for inlining do_softirq_own_stack() replace
__ARCH_HAS_DO_SOFTIRQ with a Kconfig switch and select it in the affected
architectures.

This allows in the next step to move the function prototype and the inline
stub into a seperate asm-generic header file which is required to avoid
include recursion.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210210002513.181713427@linutronix.de

show more ...

powerpc/irq: Drop forward declaration of struct irqaction

Since the commit identified below, the forward declaration of
struct irqaction is useless. Drop it.

Fixes: b709c0832824 ("ppc64: move stack

powerpc/irq: Drop forward declaration of struct irqaction

Since the commit identified below, the forward declaration of
struct irqaction is useless. Drop it.

Fixes: b709c0832824 ("ppc64: move stack switching up in interrupt processing")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/e0bcdabac45fcd26c02d7df273bd4a5827c6033d.1596716375.git.christophe.leroy@csgroup.eu

show more ...

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of th

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 3029 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

powerpc: regain entire stack space

thread_info is not anymore in the stack, so the entire stack
can now be used.

There is also no risk anymore of corrupting task_cpu(p) with a
stack overflow so the

powerpc: regain entire stack space

thread_info is not anymore in the stack, so the entire stack
can now be used.

There is also no risk anymore of corrupting task_cpu(p) with a
stack overflow so the patch removes the test.

When doing this, an explicit test for NULL stack pointer is
needed in validate_sp() as it is not anymore implicitely covered
by the sizeof(thread_info) gap.

In the meantime, with the previous patch all pointers to the stacks
are not anymore pointers to thread_info so this patch changes them
to void*

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

show more ...

powerpc: Activate CONFIG_THREAD_INFO_IN_TASK

This patch activates CONFIG_THREAD_INFO_IN_TASK which
moves the thread_info into task_struct.

Moving thread_info into task_struct has the following adva

powerpc: Activate CONFIG_THREAD_INFO_IN_TASK

This patch activates CONFIG_THREAD_INFO_IN_TASK which
moves the thread_info into task_struct.

Moving thread_info into task_struct has the following advantages:
- It protects thread_info from corruption in the case of stack
overflows.
- Its address is harder to determine if stack addresses are leaked,
making a number of attacks more difficult.

This has the following consequences:
- thread_info is now located at the beginning of task_struct.
- The 'cpu' field is now in task_struct, and only exists when
CONFIG_SMP is active.
- thread_info doesn't have anymore the 'task' field.

This patch:
- Removes all recopy of thread_info struct when the stack changes.
- Changes the CURRENT_THREAD_INFO() macro to point to current.
- Selects CONFIG_THREAD_INFO_IN_TASK.
- Modifies raw_smp_processor_id() to get ->cpu from current without
including linux/sched.h to avoid circular inclusion and without
including asm/asm-offsets.h to avoid symbol names duplication
between ASM constants and C constants.
- Modifies klp_init_thread_info() to take a task_struct pointer
argument.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Add task_stack.h to livepatch.h to fix build fails]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

show more ...

powerpc: call_do_[soft]irq() takes a pointer to the stack

The purpose of the pointer given to call_do_softirq() and
call_do_irq() is to point the new stack. Currently that's the same
thing as the th

powerpc: call_do_[soft]irq() takes a pointer to the stack

The purpose of the pointer given to call_do_softirq() and
call_do_irq() is to point the new stack. Currently that's the same
thing as the thread_info, but won't be with THREAD_INFO_IN_TASK.

So change the parameter to void* and rename it 'sp'.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Split out of larger patch]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

show more ...

powerpc: Add missing prototype for init_IRQ()

A function init_IRQ() was added without a prototype declared in header
irq.h. Fix the following warning (treated as error in W=1):

arch/powerpc/kerne

powerpc: Add missing prototype for init_IRQ()

A function init_IRQ() was added without a prototype declared in header
irq.h. Fix the following warning (treated as error in W=1):

arch/powerpc/kernel/irq.c:662:13: error: no previous prototype for ‘init_IRQ’

Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

show more ...

powerpc: Remove stale function prototypes

There were a number of prototypes for functions that no longer
exist. Remove them.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael

powerpc: Remove stale function prototypes

There were a number of prototypes for functions that no longer
exist. Remove them.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

show more ...

powerpc/irq: Run softirqs off the top of the irq stack

Nowadays, irq_exit() calls __do_softirq() pretty much directly
instead of calling do_softirq() which switches to the decicated
softirq stack.

powerpc/irq: Run softirqs off the top of the irq stack

Nowadays, irq_exit() calls __do_softirq() pretty much directly
instead of calling do_softirq() which switches to the decicated
softirq stack.

This has lead to observed stack overflows on powerpc since we call
irq_enter() and irq_exit() outside of the scope that switches to
the irq stack.

This fixes it by moving the stack switching up a level, making
irq_enter() and irq_exit() run off the irq stack.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

show more ...

powerpc/irqdomain: Fix broken NR_IRQ references

The switch from using irq_map to irq_alloc_desc*() for managing irq
number allocations introduced new bugs in some of the powerpc
interrupt code. Sev

powerpc/irqdomain: Fix broken NR_IRQ references

The switch from using irq_map to irq_alloc_desc*() for managing irq
number allocations introduced new bugs in some of the powerpc
interrupt code. Several functions rely on the value of NR_IRQS to
determine the maximum irq number that could get allocated. However,
with sparse_irq and using irq_alloc_desc*() the maximum possible irq
number is now specified with 'nr_irqs' which may be a number larger
than NR_IRQS. This has caused breakage on powermac when
CONFIG_NR_IRQS is set to 32.

This patch removes most of the direct references to NR_IRQS in the
powerpc code and replaces them with either a nr_irqs reference or by
using the common for_each_irq_desc() macro. The powerpc-specific
for_each_irq() macro is removed at the same time.

Also, the Cell axon_msi driver is refactored to remove the global
build assumption on the size of NR_IRQS and instead add a limit to the
maximum irq number when calling irq_domain_add_nomap().

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

show more ...

irq: Kill pointless irqd_to_hw export

It makes no sense to export this trivial function. Make it a static inline
instead.

This patch also drops virq_to_hw from arch/c6x since it is unused by that

irq: Kill pointless irqd_to_hw export

It makes no sense to export this trivial function. Make it a static inline
instead.

This patch also drops virq_to_hw from arch/c6x since it is unused by that
architecture.

v2: Move irq_hw_number_t into types.h to fix ARM build failure

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>

show more ...

powerpc: Remove NO_IRQ_IGNORE

Now that legacy iSeries is gone, this is no longer used.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.cras

powerpc: Remove NO_IRQ_IGNORE

Now that legacy iSeries is gone, this is no longer used.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

show more ...

irq_domain: Add support for base irq and hwirq in legacy mappings

Add support for a legacy mapping where irq = (hwirq - first_hwirq + first_irq)
so that a controller driver can allocate a fixed rang

irq_domain: Add support for base irq and hwirq in legacy mappings

Add support for a legacy mapping where irq = (hwirq - first_hwirq + first_irq)
so that a controller driver can allocate a fixed range of irq_descs and use
a simple calculation to translate back and forth between linux and hw irq
numbers. This is needed to use an irq_domain with many of the ARM interrupt
controller drivers that manage their own irq_desc allocations. Ultimately
the goal is to migrate those drivers to use the linear revmap, but doing it
this way allows each driver to be converted separately which makes the
migration path easier.

This patch generalizes the IRQ_DOMAIN_MAP_LEGACY method to use
(first_irq-first_hwirq) as the offset between hwirq and linux irq number,
and adds checks to make sure that the hwirq number does not exceed range
assigned to the controller.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Milton Miller <miltonm@bga.com>
Tested-by: Olof Johansson <olof@lixom.net>

show more ...

irq_domain: Move irq_domain code from powerpc to kernel/irq

This patch only moves the code. It doesn't make any changes, and the
code is still only compiled for powerpc. Follow-on patches will gen

irq_domain: Move irq_domain code from powerpc to kernel/irq

This patch only moves the code. It doesn't make any changes, and the
code is still only compiled for powerpc. Follow-on patches will generalize
the code for other architectures.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Milton Miller <miltonm@bga.com>
Tested-by: Olof Johansson <olof@lixom.net>

show more ...

irq_domain/powerpc: Eliminate virq_is_host()

There is only one user, and it is trivial to open-code.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Cc: Benjamin Herrenschmidt <benh@kernel.

irq_domain/powerpc: Eliminate virq_is_host()

There is only one user, and it is trivial to open-code.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Milton Miller <miltonm@bga.com>
Tested-by: Olof Johansson <olof@lixom.net>

show more ...