eth: de4x5: remove support for Generic DECchip & DIGITAL EtherWORKS PCI/EISA

Looks like almost all changes to this driver had been tree-wide
refactoring since git era begun. There is one commit from

eth: de4x5: remove support for Generic DECchip & DIGITAL EtherWORKS PCI/EISA

Looks like almost all changes to this driver had been tree-wide
refactoring since git era begun. There is one commit from Al
15 years ago which could potentially be fixing a real bug.

The driver is using virt_to_bus() and is a real magnet for pointless
cleanups. It seems unlikely to have real users. Let's try to shed
this maintenance burden.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

scsi: sr: remove references to BLK_DEV_SR_VENDOR, leave it enabled

This kernel configuration is basically enabling/disabling sr driver quirks
detection. While these quirks are for fairly rare device

scsi: sr: remove references to BLK_DEV_SR_VENDOR, leave it enabled

This kernel configuration is basically enabling/disabling sr driver quirks
detection. While these quirks are for fairly rare devices (very old CD
burners, and a glucometer), the additional detection of these models is a
very minimal amount of code.

The logic behind the quirks is always built into the sr driver.

This also removes the config from all the defconfig files that are enabling
this already.

Link: https://lore.kernel.org/r/20200223191144.726-1-flameeyes@flameeyes.com
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Diego Elio Pettenò <flameeyes@flameeyes.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

powerpc/configs: remove obsolete CONFIG_INET_XFRM_MODE_* and CONFIG_INET6_XFRM_MODE_*

These Kconfig options has been removed in commit 4c145dce2601 ("xfrm:
make xfrm modes builtin") So there is no p

powerpc/configs: remove obsolete CONFIG_INET_XFRM_MODE_* and CONFIG_INET6_XFRM_MODE_*

These Kconfig options has been removed in commit 4c145dce2601 ("xfrm:
make xfrm modes builtin") So there is no point to keep it in
defconfigs any longer.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
[mpe: Extract from cross arch patch]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190612071901.21736-1-yuehaibing@huawei.com

show more ...

powerpc/configs: Remove useless UEVENT_HELPER_PATH

Remove the CONFIG_UEVENT_HELPER_PATH because:
1. It is disabled since commit 1be01d4a5714 ("driver: base: Disable
CONFIG_UEVENT_HELPER by defaul

powerpc/configs: Remove useless UEVENT_HELPER_PATH

Remove the CONFIG_UEVENT_HELPER_PATH because:
1. It is disabled since commit 1be01d4a5714 ("driver: base: Disable
CONFIG_UEVENT_HELPER by default") as its dependency (UEVENT_HELPER) was
made default to 'n',
2. It is not recommended (help message: "This should not be used today
[...] creates a high system load") and was kept only for ancient
userland,
3. Certain userland specifically requests it to be disabled (systemd
README: "Legacy hotplug slows down the system and confuses udev").

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

show more ...

powerpc/configs: Drop unneeded CONFIG_CRYPTO_ANSI_CPRNG

Since commit 401e4238f35c ("crypto: rng - Make DRBG the default RNG") we no longer need to set CONFIG_CRYPTO_ANSI_CPRNG in our defconfigs.

Si

powerpc/configs: Drop unneeded CONFIG_CRYPTO_ANSI_CPRNG

Since commit 401e4238f35c ("crypto: rng - Make DRBG the default RNG") we no longer need to set CONFIG_CRYPTO_ANSI_CPRNG in our defconfigs.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

show more ...

powerpc/configs: Update for symbol movement only

Update defconfigs for symbols that have moved around, without their
value changing.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc: convert chrp32_defconfig to use libata PATA drivers

IDE subsystem has been deprecated since 2009 and the majority
(if not all) of Linux distributions have switched to use
libata for ATA sup

powerpc: convert chrp32_defconfig to use libata PATA drivers

IDE subsystem has been deprecated since 2009 and the majority
(if not all) of Linux distributions have switched to use
libata for ATA support exclusively. However there are still
some users (mostly old or/and embedded non-x86 systems) that
have not converted from using IDE subsystem to libata PATA
drivers. This doesn't seem to be good thing in the long-term
for Linux as while there is less and less PATA systems left
in use:

* testing efforts are divided between two subsystems

* having duplicate drivers for same hardware confuses users

This patch converts chrp32_defconfig to use libata PATA
drivers.

Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

show more ...

powerpc/configs: Remove old symbols from defconfigs

Update defconfigs to remove old symbols and comments referencing old
symbols.

Dropped:

* AVERAGE
* INET_LRO
* EXT3_DEFAULTS_TO_ORDERED
* EXT3_FS

powerpc/configs: Remove old symbols from defconfigs

Update defconfigs to remove old symbols and comments referencing old
symbols.

Dropped:

* AVERAGE
* INET_LRO
* EXT3_DEFAULTS_TO_ORDERED
* EXT3_FS_XATTR
* I2O
* INFINIBAND_AMSO1100
* INFINIBAND_EHCA
* IP1000

Replaced:

* BLK_DEV_XIP -> BLK_DEV_RAM_DAX
* CLK_PPC_CORENET -> CLK_QORIQ
* EXT2_FS_XIP -> FS_DAX
* EXT3_FS* -> EXT4_FS*

Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

show more ...

powerpc: Update all configs using savedefconfig

It looks like it's ~4 years since we updated some of these, so do a bulk
update.

Verified that the before and after generated configs are exactly the

powerpc: Update all configs using savedefconfig

It looks like it's ~4 years since we updated some of these, so do a bulk
update.

Verified that the before and after generated configs are exactly the
same.

Which begs the question why update them? The answer is that it can be
confusing when the stored defconfig drifts too far from the generated
result.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

show more ...

USB: delete CONFIG_USB_DEVICEFS from defconfig

It no longer occurs in Kconfig.
USB: remove CONFIG_USB_DEVICEFS(fb28d58b) leaked remove defconfig.

Signed-off-by: Naoki MATSUMOTO <nekomatu+linux@gmai

USB: delete CONFIG_USB_DEVICEFS from defconfig

It no longer occurs in Kconfig.
USB: remove CONFIG_USB_DEVICEFS(fb28d58b) leaked remove defconfig.

Signed-off-by: Naoki MATSUMOTO <nekomatu+linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

powerpc: Trim defconfigs

This trims all our defconfigs using make savedefconfig

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc: Disable CONFIG_SYSFS_DEPRECATED

Acked-by: Grant Likely <grant.likely@secretlab.ca>

On 5 May 2010 21:33, "Anton Blanchard" <anton@samba.org> wrote:

CONFIG_SYSFS_DEPRECATED can cause issues

powerpc: Disable CONFIG_SYSFS_DEPRECATED

Acked-by: Grant Likely <grant.likely@secretlab.ca>

On 5 May 2010 21:33, "Anton Blanchard" <anton@samba.org> wrote:

CONFIG_SYSFS_DEPRECATED can cause issues with newer distros and should not
be required for any distro in the last 3 or 4 years, so disable it.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

show more ...

eeprom: More consistent symbol names

Now that all EEPROM drivers live in the same place, let's harmonize
their symbol names.

Also fix eeprom's dependencies, it definitely needs sysfs, and is no
lon

eeprom: More consistent symbol names

Now that all EEPROM drivers live in the same place, let's harmonize
their symbol names.

Also fix eeprom's dependencies, it definitely needs sysfs, and is no
longer experimental after many years in the kernel tree.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: David Brownell <dbrownell@users.sourceforge.net>

show more ...

powerpc: Update desktop/server defconfigs

Turned off CONFIG_PCI_LEGACY and turned on EXT4, and otherwise mostly
took the defaults. This also updates ppc6xx_defconfig, which covers
the 6xx/7xx/7xxx-

powerpc: Update desktop/server defconfigs

Turned off CONFIG_PCI_LEGACY and turned on EXT4, and otherwise mostly
took the defaults. This also updates ppc6xx_defconfig, which covers
the 6xx/7xx/7xxx-based embedded boards.

Signed-off-by: Paul Mackerras <paulus@samba.org>

show more ...

powerpc: Update defconfigs for most non-embedded platforms

Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Update defconfigs for desktop/server systems

Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Remove CONFIG_PCI_LEGACY from some configs

This will remove some build warnings and doesn't stop us building any
drivers that we were building previously with these configs.

Signed-off-by

[POWERPC] Remove CONFIG_PCI_LEGACY from some configs

This will remove some build warnings and doesn't stop us building any
drivers that we were building previously with these configs.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

show more ...

[POWERPC] Update some defconfigs

Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Update defconfigs

This updates all the defconfigs in arch/powerpc/configs except iseries
and ps3, which were updated by the preceding commits.

This mostly takes the defaults, except that

[POWERPC] Update defconfigs

This updates all the defconfigs in arch/powerpc/configs except iseries
and ps3, which were updated by the preceding commits.

This mostly takes the defaults, except that I turned on tickless idle
and high-resolution timers for everything, and turned off instrumentation
support and "Fair group CPU scheduler" for the smaller/embedded platforms.

Signed-off-by: Paul Mackerras <paulus@samba.org>

show more ...

[POWERPC] Enable SLUB in *_defconfig

When checking out the new NO_HZ support in powerpc, I noticed we never
slept for more than 2 seconds. It turns out SLAB has a 2 second per cpu
timer that causes

[POWERPC] Enable SLUB in *_defconfig

When checking out the new NO_HZ support in powerpc, I noticed we never
slept for more than 2 seconds. It turns out SLAB has a 2 second per cpu
timer that causes this.

After switching to SLUB I see some nice 4 second sleeps which is the
limit on this POWER6 box (the decrementer ticks at 512MHz):

slept 4.19 sec
slept 4.19 sec
slept 4.19 sec
slept 4.19 sec
slept 3.96 sec
slept 3.80 sec
slept 2.99 sec

Since SLUB is now the default and some powerpc defconfigs already enable
it, lets enable SLUB across the board for consistency. While doing this
I also noticed that the maple defconfig has SLAB debugging enabled which
is sure to make your box nice and slow. Fix that too.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

show more ...

[POWERPC] Update defconfigs

Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Update defconfigs

Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Update defconfigs

Mostly took the defaults, except tried to get the netfilter options
more or less as they were before.

Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] update powerpc defconfig files after libata kconfig breakage

Update defconfig files after libata .config breakage

sed -i 's/CONFIG_SCSI_SATA_/CONFIG_SATA_/;s/CONFIG_SCSI_SATA/CONFIG_ATA/

[POWERPC] update powerpc defconfig files after libata kconfig breakage

Update defconfig files after libata .config breakage

sed -i 's/CONFIG_SCSI_SATA_/CONFIG_SATA_/;s/CONFIG_SCSI_SATA/CONFIG_ATA/' arch/powerpc/configs/*g

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>

show more ...

[POWERPC] Update defconfigs

Signed-off-by: Paul Mackerras <paulus@samba.org>