MIPS: ralink: Add rt3352 SPI_CS1 pinmux

The rt3352 has a pin that can be used as second spi chip select,
watchdog reset or GPIO. The pinmux setup was missing the definition of
said p

MIPS: ralink: Add rt3352 SPI_CS1 pinmux

The rt3352 has a pin that can be used as second spi chip select,
watchdog reset or GPIO. The pinmux setup was missing the definition of
said pin.

The pin is configured via the same bit on rt5350, so reuse the existing
macro.

Signed-off-by: Mathias Kresin <dev@kresin.me>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20301/
Cc: John Crispin <john@phrozen.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org

show more ...

MIPS: Audit and remove any unnecessary uses of module.h

Historically a lot of these existed because we did not have
a distinction between what was modular code and what was providing

MIPS: Audit and remove any unnecessary uses of module.h

Historically a lot of these existed because we did not have
a distinction between what was modular code and what was providing
support to modules via EXPORT_SYMBOL and friends. That changed
when we forked out support for the latter into the export.h file.

This means we should be able to reduce the usage of module.h
in code that is obj-y Makefile or bool Kconfig. In the case of
some code where it is modular, we can extend that to also include
files that are building basic support functionality but not related
to loading or registering the final module; such files also have
no need whatsoever for module.h

The advantage in removing such instances is that module.h itself
sources about 15 other headers; adding significantly to what we feed
cpp, and it can obscure what headers we are effectively using.

Since module.h might have been the implicit source for init.h
(for __init) and for export.h (for EXPORT_SYMBOL) we consider each
instance for the presence of either and replace/add as needed.

Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.

Build coverage of all the mips defconfigs revealed the module.h
header was masking a couple of implicit include instances, so
we add the appropriate headers there.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: David Daney <david.daney@cavium.com>
Cc: John Crispin <john@phrozen.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: "Steven J. Hill" <steven.hill@cavium.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15131/
[james.hogan@imgtec.com: Preserve sort order where it already exists]
Signed-off-by: James Hogan <james.hogan@imgtec.com>

show more ...

MIPS: ralink: Remove unused rt*_wdt_reset functions

All pointers to these functions were removed, so now they produce
warnings:

arch/mips/ralink/rt305x.c:92:13: error: 'rt305x_w

MIPS: ralink: Remove unused rt*_wdt_reset functions

All pointers to these functions were removed, so now they produce
warnings:

arch/mips/ralink/rt305x.c:92:13: error: 'rt305x_wdt_reset' defined but not used [-Werror=unused-function]

This removes the functions. If we need them again, the patch can be
reverted later.

Fixes: f576fb6a0700 ("MIPS: ralink: cleanup the soc specific pinmux data")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: John Crispin <john@phrozen.org>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/15044/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

show more ...

MIPS: ralink: Add missing I2C and I2S clocks.

This patch adds two additional clocks required by the audio interface of
the SoCs.

Signed-off-by: John Crispin <john@phrozen.org>

MIPS: ralink: Add missing I2C and I2S clocks.

This patch adds two additional clocks required by the audio interface of
the SoCs.

Signed-off-by: John Crispin <john@phrozen.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14897/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

show more ...

MIPS: Change my email address

The old address is no longer valid. Use the my new one instead.

Signed-off-by: John Crispin <john@phrozen.org>
Cc: linux-mips@linux-mips.org
Pa

MIPS: Change my email address

The old address is no longer valid. Use the my new one instead.

Signed-off-by: John Crispin <john@phrozen.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13201/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

show more ...

MIPS: ralink: Add a few missing clocks

Signed-off-by: John Crispin <blogic@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/11995/
Sig

MIPS: ralink: Add a few missing clocks

Signed-off-by: John Crispin <blogic@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/11995/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

show more ...

MIPS: ralink: Add missing clock on rt305x

The rt305x support is missing a clock required by the ethernet driver.

Signed-off-by: John Crispin <blogic@openwrt.org>
Cc: linux-mips@

MIPS: ralink: Add missing clock on rt305x

The rt305x support is missing a clock required by the ethernet driver.

Signed-off-by: John Crispin <blogic@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/11447/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

show more ...

MIPS: ralink: Unify SoC id handling

This makes detection a lot easier for audio, wifi, ... drivers.

Signed-off-by: John Crispin <blogic@openwrt.org>
Cc: linux-mips@linux-mips.or

MIPS: ralink: Unify SoC id handling

This makes detection a lot easier for audio, wifi, ... drivers.

Signed-off-by: John Crispin <blogic@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/11440/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

show more ...

MIPS: ralink: cleanup the soc specific pinmux data

Before we had a pinctrl driver we used a custom OF api. This patch converts the
soc specific pinmux data to a new set of structs. We al

MIPS: ralink: cleanup the soc specific pinmux data

Before we had a pinctrl driver we used a custom OF api. This patch converts the
soc specific pinmux data to a new set of structs. We also add some new pinmux
setings.

Signed-off-by: John Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/8009/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

show more ...

MIPS: Panic messages should not end in \n.

Panic() is going to add a \n itself and it's annoying if a panic message rolls
of the screen on a device with no scrollback.

Signed-of

MIPS: Panic messages should not end in \n.

Panic() is going to add a \n itself and it's annoying if a panic message rolls
of the screen on a device with no scrollback.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

show more ...

MIPS: ralink: add memory definition for RT305x

Populate struct soc_info with the data that describes our RAM window.

As memory detection fails on RT5350 we read the amount of availa

MIPS: ralink: add memory definition for RT305x

Populate struct soc_info with the data that describes our RAM window.

As memory detection fails on RT5350 we read the amount of available memory
from the system controller.

Signed-off-by: John Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/5180/

show more ...

MIPS: ralink: add uart mask to struct ralink_pinmux

Add a field for the uart muxing mask and set it inside the rt305x setup code.

Signed-off-by: John Crispin <blogic@openwrt.org>

MIPS: ralink: add uart mask to struct ralink_pinmux

Add a field for the uart muxing mask and set it inside the rt305x setup code.

Signed-off-by: John Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/5744/

show more ...

MIPS: ralink: make the RT305x pinmuxing structure static

These structures are exported via struct ralink_pinmux rt_gpio_pinmux and can
hence be static.

Signed-off-by: John Crisp

MIPS: ralink: make the RT305x pinmuxing structure static

These structures are exported via struct ralink_pinmux rt_gpio_pinmux and can
hence be static.

Signed-off-by: John Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/5172/

show more ...

MIPS: ralink: rename gpio_pinmux to rt_gpio_pinmux

Add proper namespacing to the variable.

Signed-off-by: John Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mip

MIPS: ralink: rename gpio_pinmux to rt_gpio_pinmux

Add proper namespacing to the variable.

Signed-off-by: John Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/5171/

show more ...

MIPS: ralink: fix RT305x clock setup

Add a few missing clocks.

Signed-off-by: John Crispin <blogic@openwrt.org>
Acked-by: Gabor Juhos <juhosg@openwrt.org>
Patchwork: http://

MIPS: ralink: fix RT305x clock setup

Add a few missing clocks.

Signed-off-by: John Crispin <blogic@openwrt.org>
Acked-by: Gabor Juhos <juhosg@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/5167/

show more ...

MIPS: ralink: adds support for RT305x SoC family

Add support code for rt3050, rt3052, rt3350, rt3352 and rt5350 SOC.

The code detects the SoC and registers the clk / pinmux settings

MIPS: ralink: adds support for RT305x SoC family

Add support code for rt3050, rt3052, rt3350, rt3352 and rt5350 SOC.

The code detects the SoC and registers the clk / pinmux settings.

Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/4896/

show more ...