spi/bcm63xx: move register definitions into the driver

Move all register definitions and structs into the driver. This allows
us dropping the platform_data struct and drop any arch specific
includes

spi/bcm63xx: move register definitions into the driver

Move all register definitions and structs into the driver. This allows
us dropping the platform_data struct and drop any arch specific
includes. Make use of different device names to identify the version of
the block we have.

Since we now have full control over the message width, we can drop the
size check, which was broken anyway, since it never set ret to any error
code.

Also since we now have no arch depedendent resources, we can now allow
compiling it for any arch, hidden behind COMPILE_TEST.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

show more ...

spi/bcm63xx: move message control word description to register offsets

Make the message control word parameters part of the register offsets
array so we have them all in one struct.

Signed-off-by:

spi/bcm63xx: move message control word description to register offsets

Make the message control word parameters part of the register offsets
array so we have them all in one struct.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

show more ...

MIPS: BCM63xx: Remove !RUNTIME_DETECT from spi code

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: John Crispin <blogic@openwrt.org>
Cc: Maxime Bizon <mbizon@freebo

MIPS: BCM63xx: Remove !RUNTIME_DETECT from spi code

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: John Crispin <blogic@openwrt.org>
Cc: Maxime Bizon <mbizon@freebox.fr>
Cc: Florian Fainelli <florian@openwrt.org>
Cc: Kevin Cernekee <cernekee@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/7271/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

show more ...

MIPS: BCM63XX: add support for BCM3368 Cable Modem

The Broadcom BCM3368 Cable Modem SoC is extremely similar to the
existing BCM63xx DSL SoCs, in particular BCM6358, therefore little effort
in the e

MIPS: BCM63XX: add support for BCM3368 Cable Modem

The Broadcom BCM3368 Cable Modem SoC is extremely similar to the
existing BCM63xx DSL SoCs, in particular BCM6358, therefore little effort
in the existing code base is required to get it supported. This patch adds
support for the following on-chip peripherals:

- two UARTS
- GPIO
- Ethernet
- SPI
- PCI
- NOR Flash

The most noticeable difference with 3368 is that it has its peripheral
register at 0xfff8_0000 we check that separately in ioremap.h. Since
3368 is identical to 6358 for its clock and reset bits, we use them
verbatim.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: cernekee@gmail.com
Cc: jogo@openwrt.org
Patchwork: https://patchwork.linux-mips.org/patch/5499/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

show more ...

MIPS: BCM63XX: enable SPI controller for BCM6362

The SPI controller shares the same register layout as the 6358 one.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Patchwork: http://patchwork.linux

MIPS: BCM63XX: enable SPI controller for BCM6362

The SPI controller shares the same register layout as the 6358 one.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/5010/
Acked-by: John Crispin <blogic@openwrt.org>

show more ...

MIPS: BCM63XX: remove duplicate spi register definitions

BCM6338 and BCM6348, and BCM6358 and everything after that share the
same register layout. To not have to redefine them for each new chip
and

MIPS: BCM63XX: remove duplicate spi register definitions

BCM6338 and BCM6348, and BCM6358 and everything after that share the
same register layout. To not have to redefine them for each new chip
and keep the code size small, only use the definitions for the first
chip with the certain layout.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/5006/
Acked-by: John Crispin <blogic@openwrt.org>

show more ...

spi/bcm63xx: remove unused speed_hz variable

speed_hz is a write only member, so we can safely remove it and its
generation. Also fixes the missing clk_put after getting the periph
clock.

Signed-of

spi/bcm63xx: remove unused speed_hz variable

speed_hz is a write only member, so we can safely remove it and its
generation. Also fixes the missing clk_put after getting the periph
clock.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

show more ...

MIPS: BCM63xx: Fix SPI message control register handling for BCM6338/6348.

BCM6338 and BCM6348 have a message control register width of 8 bits, instead
of 16-bits like what the SPI driver assumes ri

MIPS: BCM63xx: Fix SPI message control register handling for BCM6338/6348.

BCM6338 and BCM6348 have a message control register width of 8 bits, instead
of 16-bits like what the SPI driver assumes right now. Also the SPI message
type shift value of 14 is actually 6 for these SoCs.
This resulted in transmit FIFO corruption because we were writing 16-bits
to an 8-bits wide register, thus spanning on the first byte of the transmit
FIFO, which had already been filed in bcm63xx_spi_fill_txrx_fifo().

Fix this by passing the message control register width and message type
shift through platform data back to the SPI driver so that it can use
it properly.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: grant.likely@secretlab.ca
Cc: spi-devel-general@lists.sourceforge.net
Cc: jonas.gorski@gmail.com
Patchwork: https://patchwork.linux-mips.org/patch/3983/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

show more ...

MIPS: BCM63XX: Add basic BCM6328 support

This includes CPU speed, memory size detection and working UART, but
lacking the appropriate drivers, no support for attached flash.

Signed-off-by: Jonas Go

MIPS: BCM63XX: Add basic BCM6328 support

This includes CPU speed, memory size detection and working UART, but
lacking the appropriate drivers, no support for attached flash.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: Maxime Bizon <mbizon@freebox.fr>
Cc: Florian Fainelli <florian@openwrt.org>
Cc: Kevin Cernekee <cernekee@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/3951/
Reviewed-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

show more ...

MIPS: BCM63xx: Add stub to register the SPI platform driver

This patch adds the necessary stub to register the SPI platform driver.
Since the registers are shuffled between the 4 BCM63xx CPUs suppor

MIPS: BCM63xx: Add stub to register the SPI platform driver

This patch adds the necessary stub to register the SPI platform driver.
Since the registers are shuffled between the 4 BCM63xx CPUs supported by
this SPI driver we also need to generate the internal register layout and
export this layout for the driver to use it properly.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: grant.likely@secretlab.ca
Cc: spi-devel-general@lists.sourceforge.net
Patchwork: https://patchwork.linux-mips.org/patch/3321/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

show more ...

spi/bcm63xx: move register definitions into the driver

Move all register definitions and structs into the driver. This allows
us dropping the platform_data struct and drop any arch speci

spi/bcm63xx: move register definitions into the driver

Move all register definitions and structs into the driver. This allows
us dropping the platform_data struct and drop any arch specific
includes. Make use of different device names to identify the version of
the block we have.

Since we now have full control over the message width, we can drop the
size check, which was broken anyway, since it never set ret to any error
code.

Also since we now have no arch depedendent resources, we can now allow
compiling it for any arch, hidden behind COMPILE_TEST.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

show more ...

spi/bcm63xx: move message control word description to register offsets

Make the message control word parameters part of the register offsets
array so we have them all in one struct.

spi/bcm63xx: move message control word description to register offsets

Make the message control word parameters part of the register offsets
array so we have them all in one struct.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

show more ...

MIPS: BCM63xx: Remove !RUNTIME_DETECT from spi code

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: John Crispin <blogic@openwrt.org>
Cc: Maxime

MIPS: BCM63xx: Remove !RUNTIME_DETECT from spi code

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: John Crispin <blogic@openwrt.org>
Cc: Maxime Bizon <mbizon@freebox.fr>
Cc: Florian Fainelli <florian@openwrt.org>
Cc: Kevin Cernekee <cernekee@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/7271/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

show more ...

MIPS: BCM63XX: add support for BCM3368 Cable Modem

The Broadcom BCM3368 Cable Modem SoC is extremely similar to the
existing BCM63xx DSL SoCs, in particular BCM6358, therefore little eff

MIPS: BCM63XX: add support for BCM3368 Cable Modem

The Broadcom BCM3368 Cable Modem SoC is extremely similar to the
existing BCM63xx DSL SoCs, in particular BCM6358, therefore little effort
in the existing code base is required to get it supported. This patch adds
support for the following on-chip peripherals:

- two UARTS
- GPIO
- Ethernet
- SPI
- PCI
- NOR Flash

The most noticeable difference with 3368 is that it has its peripheral
register at 0xfff8_0000 we check that separately in ioremap.h. Since
3368 is identical to 6358 for its clock and reset bits, we use them
verbatim.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: cernekee@gmail.com
Cc: jogo@openwrt.org
Patchwork: https://patchwork.linux-mips.org/patch/5499/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

show more ...

Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS updates from Ralf Baechle:

- More work on DT support for various platforms

- Var

Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS updates from Ralf Baechle:

- More work on DT support for various platforms

- Various fixes that were to late to make it straight into 3.9

- Improved platform support, in particular the Netlogic XLR and
BCM63xx, and the SEAD3 and Malta eval boards.

- Support for several Ralink SOC families.

- Complete support for the microMIPS ASE which basically reencodes the
existing MIPS32/MIPS64 ISA to use non-constant size instructions.

- Some fallout from LTO work which remove old cruft and will generally
make the MIPS kernel easier to maintain and resistant to compiler
optimization, even in absence of LTO.

- KVM support. While MIPS has announced hardware virtualization
extensions this KVM extension uses trap and emulate mode for
virtualization of MIPS32. More KVM work to add support for VZ
hardware virtualizaiton extensions and MIPS64 will probably already
be merged for 3.11.

Most of this has been sitting in -next for a long time. All defconfigs
have been build or run time tested except three for which fixes are being
sent by other maintainers.

Semantic conflict with kvm updates done as per Ralf

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (118 commits)
MIPS: Add new GIC clockevent driver.
MIPS: Formatting clean-ups for clocksources.
MIPS: Refactor GIC clocksource code.
MIPS: Move 'gic_frequency' to common location.
MIPS: Move 'gic_present' to common location.
MIPS: MIPS16e: Add unaligned access support.
MIPS: MIPS16e: Support handling of delay slots.
MIPS: MIPS16e: Add instruction formats.
MIPS: microMIPS: Optimise 'strnlen' core library function.
MIPS: microMIPS: Optimise 'strlen' core library function.
MIPS: microMIPS: Optimise 'strncpy' core library function.
MIPS: microMIPS: Optimise 'memset' core library function.
MIPS: microMIPS: Add configuration option for microMIPS kernel.
MIPS: microMIPS: Disable LL/SC and fix linker bug.
MIPS: microMIPS: Add vdso support.
MIPS: microMIPS: Add unaligned access support.
MIPS: microMIPS: Support handling of delay slots.
MIPS: microMIPS: Add support for exception handling.
MIPS: microMIPS: Floating point support.
MIPS: microMIPS: Fix macro naming in micro-assembler.
...

show more ...

MIPS: BCM63XX: enable SPI controller for BCM6362

The SPI controller shares the same register layout as the 6358 one.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Patchwork: ht

MIPS: BCM63XX: enable SPI controller for BCM6362

The SPI controller shares the same register layout as the 6358 one.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/5010/
Acked-by: John Crispin <blogic@openwrt.org>

show more ...

MIPS: BCM63XX: remove duplicate spi register definitions

BCM6338 and BCM6348, and BCM6358 and everything after that share the
same register layout. To not have to redefine them for each

MIPS: BCM63XX: remove duplicate spi register definitions

BCM6338 and BCM6348, and BCM6358 and everything after that share the
same register layout. To not have to redefine them for each new chip
and keep the code size small, only use the definitions for the first
chip with the certain layout.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/5006/
Acked-by: John Crispin <blogic@openwrt.org>

show more ...

spi/bcm63xx: remove unused speed_hz variable

speed_hz is a write only member, so we can safely remove it and its
generation. Also fixes the missing clk_put after getting the periph
c

spi/bcm63xx: remove unused speed_hz variable

speed_hz is a write only member, so we can safely remove it and its
generation. Also fixes the missing clk_put after getting the periph
clock.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

show more ...

MIPS: BCM63xx: Fix SPI message control register handling for BCM6338/6348.

BCM6338 and BCM6348 have a message control register width of 8 bits, instead
of 16-bits like what the SPI drive

MIPS: BCM63xx: Fix SPI message control register handling for BCM6338/6348.

BCM6338 and BCM6348 have a message control register width of 8 bits, instead
of 16-bits like what the SPI driver assumes right now. Also the SPI message
type shift value of 14 is actually 6 for these SoCs.
This resulted in transmit FIFO corruption because we were writing 16-bits
to an 8-bits wide register, thus spanning on the first byte of the transmit
FIFO, which had already been filed in bcm63xx_spi_fill_txrx_fifo().

Fix this by passing the message control register width and message type
shift through platform data back to the SPI driver so that it can use
it properly.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: grant.likely@secretlab.ca
Cc: spi-devel-general@lists.sourceforge.net
Cc: jonas.gorski@gmail.com
Patchwork: https://patchwork.linux-mips.org/patch/3983/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

show more ...

MIPS: BCM63XX: Add basic BCM6328 support

This includes CPU speed, memory size detection and working UART, but
lacking the appropriate drivers, no support for attached flash.

Sig

MIPS: BCM63XX: Add basic BCM6328 support

This includes CPU speed, memory size detection and working UART, but
lacking the appropriate drivers, no support for attached flash.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: Maxime Bizon <mbizon@freebox.fr>
Cc: Florian Fainelli <florian@openwrt.org>
Cc: Kevin Cernekee <cernekee@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/3951/
Reviewed-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

show more ...

MIPS: BCM63xx: Add stub to register the SPI platform driver

This patch adds the necessary stub to register the SPI platform driver.
Since the registers are shuffled between the 4 BCM63xx

MIPS: BCM63xx: Add stub to register the SPI platform driver

This patch adds the necessary stub to register the SPI platform driver.
Since the registers are shuffled between the 4 BCM63xx CPUs supported by
this SPI driver we also need to generate the internal register layout and
export this layout for the driver to use it properly.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: grant.likely@secretlab.ca
Cc: spi-devel-general@lists.sourceforge.net
Patchwork: https://patchwork.linux-mips.org/patch/3321/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

show more ...