microblaze: Add ID for Microblaze v11

List Microblaze v11 from PVR.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

microblaze: get cpu node with of_get_cpu_node

"device_type" use is deprecated for FDT though it has continued to be used
for nodes like cpu nodes. Use of_get_cpu_node() instead which works using
nod

microblaze: get cpu node with of_get_cpu_node

"device_type" use is deprecated for FDT though it has continued to be used
for nodes like cpu nodes. Use of_get_cpu_node() instead which works using
node names by default. This will allow the eventually removal of cpu
device_type properties.

Also, fix a leaked reference by adding a missing of_node_put.

Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Rob Herring <robh@kernel.org>

show more ...

microblaze: Add new fpga families

Add new fpga families where Microblaze can run on.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

microblaze: Add missing release version code v9.6 and v10

Add missing release version code for v9.6 and v10.0.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

microblaze: Add missing release version code

Add missing release version code for v9.4 and v9.5.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

microblaze: Add target architecture

Add missing target architectures - virtex7, ultrascale virtex
and ultrascale kintex.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

microblaze: Add missing PVR version codes

PVR version code was missing in the cpu_ver_lookup table for the following
versions: 8.50.b 8.50.c 9.2 9.3

This caused /proc/cpuinfo to display "CPU-Ver: U

microblaze: Add missing PVR version codes

PVR version code was missing in the cpu_ver_lookup table for the following
versions: 8.50.b 8.50.c 9.2 9.3

This caused /proc/cpuinfo to display "CPU-Ver: Unknown" for these versions.

This was detected and the patch tested with MicroBlaze version 8.50.c.
The other codes were taken from the Xilinx MicroBlaze Processor Reference
Guides UG081 (v14.7) and UG984 (v2014.1).

Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

show more ...

microblaze: Add missing v8.50.a version

Add PVR value for MB 8.50.a.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

microblaze: Add support for CCF

Add support for CCF for Microblaze.

Old binding:
system_timer: system-timer@41c00000 {
clock-frequency = <75000000>;
...
}

New binding:
system_timer: system-timer

microblaze: Add support for CCF

Add support for CCF for Microblaze.

Old binding:
system_timer: system-timer@41c00000 {
clock-frequency = <75000000>;
...
}

New binding:
system_timer: system-timer@41c00000 {
clocks = <&clk_bus>;
...
}

Both should be supported for a while

Microblaze clock binding:
clocks {
#address-cells = <1>;
#size-cells = <0>;
clk_bus: bus {
#clock-cells = <0>;
clock-frequency = <75000000>;
clock-output-names = "bus";
compatible = "fixed-clock";
reg = <1>;
} ;
clk_cpu: cpu {
#clock-cells = <0>;
clock-frequency = <75000000>;
clock-output-names = "cpu";
compatible = "fixed-clock";
reg = <0>;
} ;
} ;

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

show more ...

microblaze: Add PVR version string for MB v9.0 and v9.1

Extend PVR reg decoding.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

microblaze: Add support for new cpu versions and target architecture

Update PVR values based on reference manual.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

microblaze: Fix coding style issues

Fix coding style issues reported by checkpatch.pl.

Signed-off-by: Michal Simek <monstr@monstr.eu>

microblaze: Add PVR version string for MB 8.20.b and 8.30.a

Just extend PVR reg decoding.

Signed-off-by: Michal Simek <monstr@monstr.eu>

microblaze: Add PVR for Microblaze v8.20.a

Microblaze v8.20.a has 0x15 version string.

Signed-off-by: Michal Simek <monstr@monstr.eu>

microblaze: Unprivileged stream instruction awareness

Add cpuinfo support for the new MicroBlaze option permitting userspace
(unprivileged) access to the streaming instructions (FSL / AXI-stream).

microblaze: Unprivileged stream instruction awareness

Add cpuinfo support for the new MicroBlaze option permitting userspace
(unprivileged) access to the streaming instructions (FSL / AXI-stream).

Emit a noisy warning at bootup if this is enabled, because bad user code
can potentially lockup the CPU.

Signed-off-by: John A. Williams <john.williams@petalogix.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>

show more ...

microblaze: Add PVR for Microblaze v8.10.a

Microblaze v8.10.a has 0x14 version string.

Signed-off-by: Michal Simek <monstr@monstr.eu>

microblaze: Add PVR for Microblaze v8.00.b

Microblaze v8.00.b have 0x13 version string.

Signed-off-by: Michal Simek <monstr@monstr.eu>

microblaze: Add new microblaze versions

PVR for 7.30.b, 8.00.a versions.

Signed-off-by: Michal Simek <monstr@monstr.eu>

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

percpu.h is included by sched.h and module.h and thus ends up being
included when bu

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.

2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).

* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>

show more ...

microblaze: Add PVR for Microblaze v7.30.a

Microblaze v7.30.a will have 0x10 version string.

Signed-off-by: Michal Simek <monstr@monstr.eu>

microblaze: Remove ancient and fake microblaze version from cpu_ver table

We need to continue with next microblaze PVR version that's why
I have to remove that ancient version. These version strings

microblaze: Remove ancient and fake microblaze version from cpu_ver table

We need to continue with next microblaze PVR version that's why
I have to remove that ancient version. These version strings not match
any versions. From Microblaze v5.00.a is possible to use this style.
I believe that none use ancients versions. If yes they will be just
labeled as unknown version.

Signed-off-by: Michal Simek <monstr@monstr.eu>

show more ...

microblaze: Detect new 7.20.d version

Signed-off-by: Michal Simek <monstr@monstr.eu>

microblaze: Updated CPU version and FPGA family codes in PVR

Signed-off-by: John Williams <john.williams@petalogix.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>

microblaze: Detect new Microblaze 7.20 versions

Signed-off-by: Michal Simek <monstr@monstr.eu>

microblaze: Do not use PVR configuration for broken MB version

Signed-off-by: Michal Simek <monstr@monstr.eu>