ia64: replace comments with C99 initializers

This replaces comments with C99's designated initializers because the
kernel supports them now.

Link: https://lkml.kernel.org/r/20220326165909.506926-3-

ia64: replace comments with C99 initializers

This replaces comments with C99's designated initializers because the
kernel supports them now.

Link: https://lkml.kernel.org/r/20220326165909.506926-3-benni@stuerz.xyz
Signed-off-by: Benjamin Stürz <benni@stuerz.xyz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

show more ...

kprobes: treewide: Make it harder to refer kretprobe_trampoline directly

Since now there is kretprobe_trampoline_addr() for referring the
address of kretprobe trampoline code, we don't need to acces

kprobes: treewide: Make it harder to refer kretprobe_trampoline directly

Since now there is kretprobe_trampoline_addr() for referring the
address of kretprobe trampoline code, we don't need to access
kretprobe_trampoline directly.

Make it harder to refer by renaming it to __kretprobe_trampoline().

Link: https://lkml.kernel.org/r/163163045446.489837.14510577516938803097.stgit@devnote2

Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

show more ...

kprobes: treewide: Remove trampoline_address from kretprobe_trampoline_handler()

The __kretprobe_trampoline_handler() callback, called from low level
arch kprobes methods, has the 'trampoline_addres

kprobes: treewide: Remove trampoline_address from kretprobe_trampoline_handler()

The __kretprobe_trampoline_handler() callback, called from low level
arch kprobes methods, has the 'trampoline_address' parameter, which is
entirely superfluous as it basically just replicates:

dereference_kernel_function_descriptor(kretprobe_trampoline)

In fact we had bugs in arch code where it wasn't replicated correctly.

So remove this superfluous parameter and use kretprobe_trampoline_addr()
instead.

Link: https://lkml.kernel.org/r/163163044546.489837.13505751885476015002.stgit@devnote2

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

show more ...

kprobes: treewide: Replace arch_deref_entry_point() with dereference_symbol_descriptor()

~15 years ago kprobes grew the 'arch_deref_entry_point()' __weak function:

3d7e33825d87: ("jprobes: make j

kprobes: treewide: Replace arch_deref_entry_point() with dereference_symbol_descriptor()

~15 years ago kprobes grew the 'arch_deref_entry_point()' __weak function:

3d7e33825d87: ("jprobes: make jprobes a little safer for users")

But this is just open-coded dereference_symbol_descriptor() in essence, and
its obscure nature was causing bugs.

Just use the real thing and remove arch_deref_entry_point().

Link: https://lkml.kernel.org/r/163163043630.489837.7924988885652708696.stgit@devnote2

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

show more ...

ia64: kprobes: Fix to pass correct trampoline address to the handler

The following commit:

Commit e792ff804f49 ("ia64: kprobes: Use generic kretprobe trampoline handler")

Passed the wrong tramp

ia64: kprobes: Fix to pass correct trampoline address to the handler

The following commit:

Commit e792ff804f49 ("ia64: kprobes: Use generic kretprobe trampoline handler")

Passed the wrong trampoline address to __kretprobe_trampoline_handler(): it
passes the descriptor address instead of function entry address.

Pass the right parameter.

Also use correct symbol dereference function to get the function address
from 'kretprobe_trampoline' - an IA64 special.

Link: https://lkml.kernel.org/r/163163042696.489837.12551102356265354730.stgit@devnote2

Fixes: e792ff804f49 ("ia64: kprobes: Use generic kretprobe trampoline handler")
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: X86 ML <x86@kernel.org>
Cc: Daniel Xu <dxu@dxuuu.xyz>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Abhishek Sagar <sagar.abhishek@gmail.com>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Paul McKenney <paulmck@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

show more ...

ia64: kprobes: Fix to pass correct trampoline address to the handler

commit a7fe2378454cf46cd5e2776d05e72bbe8f0a468c upstream.

The following commit:

Commit e792ff804f49 ("ia64: kprobes: Use gen

ia64: kprobes: Fix to pass correct trampoline address to the handler

commit a7fe2378454cf46cd5e2776d05e72bbe8f0a468c upstream.

The following commit:

Commit e792ff804f49 ("ia64: kprobes: Use generic kretprobe trampoline handler")

Passed the wrong trampoline address to __kretprobe_trampoline_handler(): it
passes the descriptor address instead of function entry address.

Pass the right parameter.

Also use correct symbol dereference function to get the function address
from 'kretprobe_trampoline' - an IA64 special.

Link: https://lkml.kernel.org/r/163163042696.489837.12551102356265354730.stgit@devnote2

Fixes: e792ff804f49 ("ia64: kprobes: Use generic kretprobe trampoline handler")
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: X86 ML <x86@kernel.org>
Cc: Daniel Xu <dxu@dxuuu.xyz>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Abhishek Sagar <sagar.abhishek@gmail.com>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Paul McKenney <paulmck@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

kprobes: Do not increment probe miss count in the fault handler

Kprobes has a counter 'nmissed', that is used to count the number of
times a probe handler was not called. This generally happens when

kprobes: Do not increment probe miss count in the fault handler

Kprobes has a counter 'nmissed', that is used to count the number of
times a probe handler was not called. This generally happens when we hit
a kprobe while handling another kprobe.

However, if one of the probe handlers causes a fault, we are currently
incrementing 'nmissed'. The comment in fault handler indicates that this
can be used to account faults taken by the probe handlers. But, this has
never been the intention as is evident from the comment above 'nmissed'
in 'struct kprobe':

/*count the number of times this probe was temporarily disarmed */
unsigned long nmissed;

Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lkml.kernel.org/r/20210601120150.672652-1-naveen.n.rao@linux.vnet.ibm.com

show more ...

kprobes: Remove kprobe::fault_handler

The reason for kprobe::fault_handler(), as given by their comment:

* We come here because instructions in the pre/post
* handler caused the page_fault, this

kprobes: Remove kprobe::fault_handler

The reason for kprobe::fault_handler(), as given by their comment:

* We come here because instructions in the pre/post
* handler caused the page_fault, this could happen
* if handler tries to access user space by
* copy_from_user(), get_user() etc. Let the
* user-specified handler try to fix it first.

Is just plain bad. Those other handlers are ran from non-preemptible
context and had better use _nofault() functions. Also, there is no
upstream usage of this.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20210525073213.561116662@infradead.org

show more ...

ia64: kprobes: Use generic kretprobe trampoline handler

Use the generic kretprobe trampoline handler. Don't use
framepointer verification.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Sign

ia64: kprobes: Use generic kretprobe trampoline handler

Use the generic kretprobe trampoline handler. Don't use
framepointer verification.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/159870606883.1229682.12331813108378725668.stgit@devnote2

show more ...

mm: reorder includes after introduction of linux/pgtable.h

The replacement of <asm/pgrable.h> with <linux/pgtable.h> made the include
of the latter in the middle of asm includes. Fix this up with t

mm: reorder includes after introduction of linux/pgtable.h

The replacement of <asm/pgrable.h> with <linux/pgtable.h> made the include
of the latter in the middle of asm includes. Fix this up with the aid of
the below script and manual adjustments here and there.

import sys
import re

if len(sys.argv) is not 3:
print "USAGE: %s <file> <header>" % (sys.argv[0])
sys.exit(1)

hdr_to_move="#include <linux/%s>" % sys.argv[2]
moved = False
in_hdrs = False

with open(sys.argv[1], "r") as f:
lines = f.readlines()
for _line in lines:
line = _line.rstrip('
')
if line == hdr_to_move:
continue
if line.startswith("#include <linux/"):
in_hdrs = True
elif not moved and in_hdrs:
moved = True
print hdr_to_move
print line

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-4-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

show more ...

mm: introduce include/linux/pgtable.h

The include/linux/pgtable.h is going to be the home of generic page table
manipulation functions.

Start with moving asm-generic/pgtable.h to include/linux/pgta

mm: introduce include/linux/pgtable.h

The include/linux/pgtable.h is going to be the home of generic page table
manipulation functions.

Start with moving asm-generic/pgtable.h to include/linux/pgtable.h and
make the latter include asm/pgtable.h.

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-3-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

show more ...

sched/rt, ia64: Use CONFIG_PREEMPTION

CONFIG_PREEMPTION is selected by CONFIG_PREEMPT and by CONFIG_PREEMPT_RT.
Both PREEMPT and PREEMPT_RT require the same functionality which today
depends on CONF

sched/rt, ia64: Use CONFIG_PREEMPTION

CONFIG_PREEMPTION is selected by CONFIG_PREEMPT and by CONFIG_PREEMPT_RT.
Both PREEMPT and PREEMPT_RT require the same functionality which today
depends on CONFIG_PREEMPT.

Switch the entry code and kprobes over to use CONFIG_PREEMPTION.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-ia64@vger.kernel.org
Link: https://lore.kernel.org/r/20191015191821.11479-10-bigeasy@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>

show more ...

ia64/kprobes: remove the unused ia64_get_bsp_cfm function

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lkml.kernel.org/r/20190812065524.19959-4-hch@lst.de
Signed-off-by: Tony Luck <to

ia64/kprobes: remove the unused ia64_get_bsp_cfm function

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lkml.kernel.org/r/20190812065524.19959-4-hch@lst.de
Signed-off-by: Tony Luck <tony.luck@intel.com>

show more ...

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of th

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details you
should have received a copy of the gnu general public license along
with this program if not write to the free software foundation inc
59 temple place suite 330 boston ma 02111 1307 usa

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 1334 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

bpf/error-inject/kprobes: Clear current_kprobe and enable preempt in kprobe

Clear current_kprobe and enable preemption in kprobe
even if pre_handler returns !0.

This simplifies function override us

bpf/error-inject/kprobes: Clear current_kprobe and enable preempt in kprobe

Clear current_kprobe and enable preemption in kprobe
even if pre_handler returns !0.

This simplifies function override using kprobes.

Jprobe used to require to keep the preemption disabled and
keep current_kprobe until it returned to original function
entry. For this reason kprobe_int3_handler() and similar
arch dependent kprobe handers checks pre_handler result
and exit without enabling preemption if the result is !0.

After removing the jprobe, Kprobes does not need to
keep preempt disabled even if user handler returns !0
anymore.

But since the function override handler in error-inject
and bpf is also returns !0 if it overrides a function,
to balancing the preempt count, it enables preemption
and reset current kprobe by itself.

That is a bad design that is very buggy. This fixes
such unbalanced preempt-count and current_kprobes setting
in kprobes, bpf and error-inject.

Note: for powerpc and x86, this removes all preempt_disable
from kprobe_ftrace_handler because ftrace callbacks are
called under preempt disabled.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: linux-arch@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-ia64@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-s390@vger.kernel.org
Cc: linux-sh@vger.kernel.org
Cc: linux-snps-arc@lists.infradead.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: sparclinux@vger.kernel.org
Link: https://lore.kernel.org/lkml/152942494574.15209.12323837825873032258.stgit@devbox
Signed-off-by: Ingo Molnar <mingo@kernel.org>

show more ...

ia64/kprobes: Don't call the ->break_handler() in ia64 kprobes code

Don't call the ->break_handler() from the ia64 kprobes code,
because it was only used by jprobes which got removed.

Signed-off-by

ia64/kprobes: Don't call the ->break_handler() in ia64 kprobes code

Don't call the ->break_handler() from the ia64 kprobes code,
because it was only used by jprobes which got removed.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-arch@vger.kernel.org
Cc: linux-ia64@vger.kernel.org
Link: https://lore.kernel.org/lkml/152942480045.15209.10715901482832337704.stgit@devbox
Signed-off-by: Ingo Molnar <mingo@kernel.org>

show more ...

ia64/kprobes: Remove jprobe implementation

Remove arch dependent setjump/longjump functions
and unused fields in kprobe_ctlblk for jprobes
from arch/ia64.

Note that since ia64 jprobes code is a bit

ia64/kprobes: Remove jprobe implementation

Remove arch dependent setjump/longjump functions
and unused fields in kprobe_ctlblk for jprobes
from arch/ia64.

Note that since ia64 jprobes code is a bit different
from other architectures, this keeps __IA64_BREAK_JPROBE
for checking the ->break_handler(). It will be removed
with the break_handler() calls afterwards.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-arch@vger.kernel.org
Cc: linux-ia64@vger.kernel.org
Link: https://lore.kernel.org/lkml/152942448152.15209.2026051332977587306.stgit@devbox
Signed-off-by: Ingo Molnar <mingo@kernel.org>

show more ...

ia64: ensure exception table search users include extable.h

We start with a delete of a duplicate prototype in asm/exception.h
that no longer needs to exist, as it duplicates content in extable.h
an

ia64: ensure exception table search users include extable.h

We start with a delete of a duplicate prototype in asm/exception.h
that no longer needs to exist, as it duplicates content in extable.h
and since that header is so small, there is no point trying to
avoid using it.

Then we make sure anyone using search_exception_tables directly or
via the ia64_done_with_exception macro has included extable.h

In the process, we remove an include of moduleloader.h that was
apparently not really required; it would have been fetching in
module.h and hence the previous location of the exception search
function prototypes, but we need not rely on that anymore.

Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: linux-ia64@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

show more ...

ia64: move ia64_done_with_exception out of asm/uaccess.h

Move ia64_done_with_exception out of asm/uaccess.h (which is widely
used) and into asm/exception.h (like ARM has) and then ensure the
few cal

ia64: move ia64_done_with_exception out of asm/uaccess.h

Move ia64_done_with_exception out of asm/uaccess.h (which is widely
used) and into asm/exception.h (like ARM has) and then ensure the
few callers of it include this new header.

Most of the other C content in asm files is implemented in macro form.
So we do that conversion at the same time as the move.

There are two C exception prototypes that move along with the macro.
One of them will become redundant when we switch over to using the
<linux/extable.h> instead of <linux/module.h> header in a subsequent
commit.

Also relocate a couple of the automated asm --> linux uaccess
conversions to preserve the linux and asm independent grouping, since
we are in the file at that location anyway.

Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: linux-ia64@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

show more ...

Replace <asm/uaccess.h> with <linux/uaccess.h> globally

This was entirely automated, using the script by Al:

PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>'
sed -i -e "s!$PA

Replace <asm/uaccess.h> with <linux/uaccess.h> globally

This was entirely automated, using the script by Al:

PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>'
sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \
$(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h)

to do the replacement at the end of the merge window.

Requested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

show more ...

ia64: Replace __get_cpu_var uses

__get_cpu_var() is used for multiple purposes in the kernel source. One of
them is address calculation via the form &__get_cpu_var(x). This calculates
the address f

ia64: Replace __get_cpu_var uses

__get_cpu_var() is used for multiple purposes in the kernel source. One of
them is address calculation via the form &__get_cpu_var(x). This calculates
the address for the instance of the percpu variable of the current processor
based on an offset.

Other use cases are for storing and retrieving data from the current
processors percpu area. __get_cpu_var() can be used as an lvalue when
writing data or on the right side of an assignment.

__get_cpu_var() is defined as :

#define __get_cpu_var(var) (*this_cpu_ptr(&(var)))

__get_cpu_var() always only does an address determination. However, store
and retrieve operations could use a segment prefix (or global register on
other platforms) to avoid the address calculation.

this_cpu_write() and this_cpu_read() can directly take an offset into a
percpu area and use optimized assembly code to read and write per cpu
variables.

This patch converts __get_cpu_var into either an explicit address
calculation using this_cpu_ptr() or into a use of this_cpu operations that
use the offset. Thereby address calculations are avoided and less registers
are used when code is generated.

At the end of the patch set all uses of __get_cpu_var have been removed so
the macro is removed too.

The patch set includes passes over all arches as well. Once these operations
are used throughout then specialized macros can be defined in non -x86
arches as well in order to optimize per cpu access by f.e. using a global
register that may be set to the per cpu base.

Transformations done to __get_cpu_var()

1. Determine the address of the percpu instance of the current processor.

DEFINE_PER_CPU(int, y);
int *x = &__get_cpu_var(y);

Converts to

int *x = this_cpu_ptr(&y);

2. Same as #1 but this time an array structure is involved.

DEFINE_PER_CPU(int, y[20]);
int *x = __get_cpu_var(y);

Converts to

int *x = this_cpu_ptr(y);

3. Retrieve the content of the current processors instance of a per cpu
variable.

DEFINE_PER_CPU(int, y);
int x = __get_cpu_var(y)

Converts to

int x = __this_cpu_read(y);

4. Retrieve the content of a percpu struct

DEFINE_PER_CPU(struct mystruct, y);
struct mystruct x = __get_cpu_var(y);

Converts to

memcpy(&x, this_cpu_ptr(&y), sizeof(x));

5. Assignment to a per cpu variable

DEFINE_PER_CPU(int, y)
__get_cpu_var(y) = x;

Converts to

__this_cpu_write(y, x);

6. Increment/Decrement etc of a per cpu variable

DEFINE_PER_CPU(int, y);
__get_cpu_var(y)++

Converts to

__this_cpu_inc(y)

Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: linux-ia64@vger.kernel.org
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

show more ...

doc: typo on word accounting in kprobes.c in mutliple architectures

Signed-off-by: Anoop Thomas Mathew <atm@profoundis.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

hlist: drop the node parameter from iterators

I'm not sure why, but the hlist for each entry iterators were conceived

list_for_each_entry(pos, head, member)

The hlist ones were greedy and

hlist: drop the node parameter from iterators

I'm not sure why, but the hlist for each entry iterators were conceived

list_for_each_entry(pos, head, member)

The hlist ones were greedy and wanted an extra parameter:

hlist_for_each_entry(tpos, pos, head, member)

Why did they need an extra pos parameter? I'm not quite sure. Not only
they don't really need it, it also prevents the iterator from looking
exactly like the list iterator, which is unfortunate.

Besides the semantic patch, there was some manual work required:

- Fix up the actual hlist iterators in linux/list.h
- Fix up the declaration of other iterators based on the hlist ones.
- A very small amount of places were using the 'node' parameter, this
was modified to use 'obj->member' instead.
- Coccinelle didn't handle the hlist_for_each_entry_safe iterator
properly, so those had to be fixed up manually.

The semantic patch which is mostly the work of Peter Senna Tschudin is here:

@@
iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host;

type T;
expression a,c,d,e;
identifier b;
statement S;
@@

-T b;
<+... when != b
(
hlist_for_each_entry(a,
- b,
c, d) S
|
hlist_for_each_entry_continue(a,
- b,
c) S
|
hlist_for_each_entry_from(a,
- b,
c) S
|
hlist_for_each_entry_rcu(a,
- b,
c, d) S
|
hlist_for_each_entry_rcu_bh(a,
- b,
c, d) S
|
hlist_for_each_entry_continue_rcu_bh(a,
- b,
c) S
|
for_each_busy_worker(a, c,
- b,
d) S
|
ax25_uid_for_each(a,
- b,
c) S
|
ax25_for_each(a,
- b,
c) S
|
inet_bind_bucket_for_each(a,
- b,
c) S
|
sctp_for_each_hentry(a,
- b,
c) S
|
sk_for_each(a,
- b,
c) S
|
sk_for_each_rcu(a,
- b,
c) S
|
sk_for_each_from
-(a, b)
+(a)
S
+ sk_for_each_from(a) S
|
sk_for_each_safe(a,
- b,
c, d) S
|
sk_for_each_bound(a,
- b,
c) S
|
hlist_for_each_entry_safe(a,
- b,
c, d, e) S
|
hlist_for_each_entry_continue_rcu(a,
- b,
c) S
|
nr_neigh_for_each(a,
- b,
c) S
|
nr_neigh_for_each_safe(a,
- b,
c, d) S
|
nr_node_for_each(a,
- b,
c) S
|
nr_node_for_each_safe(a,
- b,
c, d) S
|
- for_each_gfn_sp(a, c, d, b) S
+ for_each_gfn_sp(a, c, d) S
|
- for_each_gfn_indirect_valid_sp(a, c, d, b) S
+ for_each_gfn_indirect_valid_sp(a, c, d) S
|
for_each_host(a,
- b,
c) S
|
for_each_host_safe(a,
- b,
c, d) S
|
for_each_mesh_entry(a,
- b,
c, d) S
)
...+>

[akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c]
[akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c]
[akpm@linux-foundation.org: checkpatch fixes]
[akpm@linux-foundation.org: fix warnings]
[akpm@linux-foudnation.org: redo intrusive kvm changes]
Tested-by: Peter Senna Tschudin <peter.senna@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

show more ...

kprobes: Disable booster when CONFIG_PREEMPT=y

Disable kprobe booster when CONFIG_PREEMPT=y at this time,
because it can't ensure that all kernel threads preempted on
kprobe's boosted slot run out f

kprobes: Disable booster when CONFIG_PREEMPT=y

Disable kprobe booster when CONFIG_PREEMPT=y at this time,
because it can't ensure that all kernel threads preempted on
kprobe's boosted slot run out from the slot even using
freeze_processes().

The booster on preemptive kernel will be resumed if
synchronize_tasks() or something like that is introduced.

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20100202214904.4694.24330.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

show more ...

kprobes: check CONFIG_FREEZER instead of CONFIG_PM

Check CONFIG_FREEZER instead of CONFIG_PM because kprobe booster
depends on freeze_processes() and thaw_processes() when CONFIG_PREEMPT=y.

This fi

kprobes: check CONFIG_FREEZER instead of CONFIG_PM

Check CONFIG_FREEZER instead of CONFIG_PM because kprobe booster
depends on freeze_processes() and thaw_processes() when CONFIG_PREEMPT=y.

This fixes a linkage error which occurs when CONFIG_PREEMPT=y, CONFIG_PM=y
and CONFIG_FREEZER=n.

Reported-by: Cheng Renquan <crquan@gmail.com>
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Len Brown <len.brown@intel.com>

show more ...