Revision tags: v2.6.16-rc3, v2.6.16-rc2, v2.6.16-rc1, v2.6.15, v2.6.15-rc7, v2.6.15-rc6, v2.6.15-rc5, v2.6.15-rc4, v2.6.15-rc3, v2.6.15-rc2 |
|
#
e8aabc47 |
| 17-Nov-2005 |
Chen, Kenneth W <kenneth.w.chen@intel.com> |
[IA64] polish comments for tlb fault handler in ivt.S
Polish the comments specifically in vhpt_miss and nested_dtlb_miss handlers. I think it's better to explicitly name each page table level with
[IA64] polish comments for tlb fault handler in ivt.S
Polish the comments specifically in vhpt_miss and nested_dtlb_miss handlers. I think it's better to explicitly name each page table level with its name instead of numerically name them. i.e., use pgd, pud, pmd, and pte instead of referring as L1, L2, L3 etc. Along the line, remove some magic number in the comments like: "PTA + (((IFA(61,63) << 7) | IFA(33,39))*8)". No code change at all, pure comment update. Feel free to shoot anything you have, darts or tomahawk cruise missile. I will duck behind a bunker ;-)
Signed-off-by: Ken Chen <kenneth.w.chen@intel.com> Acked-by: Robin Holt <holt@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
show more ...
|
#
fedb25fa |
| 17-Nov-2005 |
Chen, Kenneth W <kenneth.w.chen@intel.com> |
[IA64] 4 level page table bug fix in vhpt_miss
From source code inspection, I think there is a bug with 4 level page table with vhpt_miss handler. In the code path of rechecking page table entry ag
[IA64] 4 level page table bug fix in vhpt_miss
From source code inspection, I think there is a bug with 4 level page table with vhpt_miss handler. In the code path of rechecking page table entry against previously read value after tlb insertion, *pte value in register r18 was overwritten with value newly read from pud pointer, render the check of new *pte against previous *pte completely wrong. Though the bug is none fatal and the penalty is to purge the entry and retry. For functional correctness, it should be fixed. The fix is to use a different register so new *pud don't trash *pte. (btw, the comments in the cmp statement is wrong as well, which I will address in the next patch).
Signed-off-by: Ken Chen <kenneth.w.chen@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
show more ...
|
Revision tags: v2.6.15-rc1 |
|
#
837cd0bd |
| 11-Nov-2005 |
Robin Holt <holt@sgi.com> |
[IA64] 4-level page tables
This patch introduces 4-level page tables to ia64. I have run some benchmarks and found nothing interesting. Performance has consistently fallen within the noise range.
[IA64] 4-level page tables
This patch introduces 4-level page tables to ia64. I have run some benchmarks and found nothing interesting. Performance has consistently fallen within the noise range.
It also introduces a config option (setting the default to 3 levels). The config option prevents having 4 level page tables with 64k base page size.
Signed-off-by: Robin Holt <holt@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
show more ...
|
Revision tags: v2.6.14, v2.6.14-rc5, v2.6.14-rc4, v2.6.14-rc3, v2.6.14-rc2, v2.6.14-rc1 |
|
#
05f335ea |
| 11-Sep-2005 |
Keith Owens <kaos@sgi.com> |
[IA64] MCA/INIT: remove the physical mode path from minstate.h
Remove the physical mode path from minstate.h.
Signed-off-by: Keith Owens <kaos@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
|
#
39e01cb8 |
| 09-Sep-2005 |
Sam Ravnborg <sam@mars.(none)> |
kbuild: ia64 use generic asm-offsets.h support
Delete obsolete stuff from arch Makefile Rename file to asm-offsets.h The trick used in the arch Makefile to circumvent the circular dependency is kept
kbuild: ia64 use generic asm-offsets.h support
Delete obsolete stuff from arch Makefile Rename file to asm-offsets.h The trick used in the arch Makefile to circumvent the circular dependency is kept.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
show more ...
|
Revision tags: v2.6.13, v2.6.13-rc7, v2.6.13-rc6, v2.6.13-rc5, v2.6.13-rc4, v2.6.13-rc3, v2.6.13-rc2, v2.6.13-rc1, v2.6.12, v2.6.12-rc6, v2.6.12-rc5, v2.6.12-rc4 |
|
#
458f9355 |
| 04-May-2005 |
David Mosberger-Tang <davidm@hpl.hp.com> |
[IA64] Speed up lfetch.fault [NULL]
This patch greatly speeds up the handling of lfetch.fault instructions which result in NaT consumption. Due to the NaT-page mapped at address 0, this is guarantee
[IA64] Speed up lfetch.fault [NULL]
This patch greatly speeds up the handling of lfetch.fault instructions which result in NaT consumption. Due to the NaT-page mapped at address 0, this is guaranteed to happen when lfetch.fault'ing a NULL pointer. With this patch in place, we can even define prefetch()/prefetchw() as lfetch.fault without significant performance degradation. More importantly, it allows compilers to be more aggressive with using lfetch.fault on pointers that might be NULL.
Signed-off-by: David Mosberger-Tang <davidm@hpl.hp.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
show more ...
|
#
0393eed5 |
| 21-Jun-2005 |
Ken Chen <kenneth.w.chen@intel.com> |
[IA64] fix nested_dtlb_miss handler for hugetlb address
The nested_dtlb_miss handler currently does not handle fault from hugetlb address correctly. It walks the page table assuming PAGE_SIZE. Thus
[IA64] fix nested_dtlb_miss handler for hugetlb address
The nested_dtlb_miss handler currently does not handle fault from hugetlb address correctly. It walks the page table assuming PAGE_SIZE. Thus when taking a fault triggered from hugetlb address, it would not calculate the pgd/pmd/pte address correctly and thus result an incorrect invocation of ia64_do_page_fault(). In there, kernel will signal SIGBUS and application dies (The faulting address is perfectly legal and we have a valid pte for the corresponding user hugetlb address as well). This patch fix the described kernel bug. Since nested_dtlb_miss is a rare event and a slow path anyway, I'm making the change without #ifdef CONFIG_HUGETLB_PAGE for code readability. Tony, please apply.
Signed-off-by: Ken Chen <kenneth.w.chen@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
show more ...
|
#
f8fa5448 |
| 27-Apr-2005 |
David Mosberger-Tang <davidm@hpl.hp.com> |
[IA64] Reschedule break_fault() for better performance.
This patch reorganizes break_fault() to optimistically assume that a system-call is being performed from user-space (which is almost always th
[IA64] Reschedule break_fault() for better performance.
This patch reorganizes break_fault() to optimistically assume that a system-call is being performed from user-space (which is almost always the case). If it turns out that (a) we're not being called due to a system call or (b) we're being called from within the kernel, we fixup the no-longer-valid assumptions in non_syscall() and .break_fixup(), respectively.
With this approach, there are 3 major phases:
- Phase 1: Read various control & application registers, in particular the current task pointer from AR.K6. - Phase 2: Do all memory loads (load system-call entry, load current_thread_info()->flags, prefetch kernel register-backing store) and switch to kernel register-stack. - Phase 3: Call ia64_syscall_setup() and invoke syscall-handler.
Good for 26-30 cycles of improvement on break-based syscall-path.
Signed-off-by: David Mosberger-Tang <davidm@hpl.hp.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
show more ...
|
#
060561ff |
| 27-Apr-2005 |
David Mosberger-Tang <davidm@hpl.hp.com> |
[IA64] In syscall-entry, use st8 instead of stf8 to clear pt_regs.r8
Using stf8 seemed like a clever idea at the time, but stf8 forces the cache-line to be invalidated in the L1D (if it happens to b
[IA64] In syscall-entry, use st8 instead of stf8 to clear pt_regs.r8
Using stf8 seemed like a clever idea at the time, but stf8 forces the cache-line to be invalidated in the L1D (if it happens to be there already). This patch eliminates a guaranteed L1D cache-miss and, by itself, is good for a 1-2 cycle improvement for heavy-weight syscalls.
Signed-off-by: David Mosberger-Tang <davidm@hpl.hp.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
show more ...
|
Revision tags: v2.6.12-rc3, v2.6.12-rc2 |
|
#
1da177e4 |
| 16-Apr-2005 |
Linus Torvalds <torvalds@ppc970.osdl.org> |
Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in
Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it.
Let it rip!
show more ...
|
Revision tags: v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22, v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70, v5.15.69, v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62, v5.15.61, v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55, v5.15.54, v5.15.53, v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48, v5.15.47, v5.15.46, v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.16, v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2 |
|
#
65fddcfc |
| 08-Jun-2020 |
Mike Rapoport <rppt@linux.ibm.com> |
mm: reorder includes after introduction of linux/pgtable.h The replacement of <asm/pgrable.h> with <linux/pgtable.h> made the include of the latter in the middle of asm includes. Fix th
mm: reorder includes after introduction of linux/pgtable.h The replacement of <asm/pgrable.h> with <linux/pgtable.h> made the include of the latter in the middle of asm includes. Fix this up with the aid of the below script and manual adjustments here and there. import sys import re if len(sys.argv) is not 3: print "USAGE: %s <file> <header>" % (sys.argv[0]) sys.exit(1) hdr_to_move="#include <linux/%s>" % sys.argv[2] moved = False in_hdrs = False with open(sys.argv[1], "r") as f: lines = f.readlines() for _line in lines: line = _line.rstrip(' ') if line == hdr_to_move: continue if line.startswith("#include <linux/"): in_hdrs = True elif not moved and in_hdrs: moved = True print hdr_to_move print line Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-4-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
show more ...
|
#
ca5999fd |
| 08-Jun-2020 |
Mike Rapoport <rppt@linux.ibm.com> |
mm: introduce include/linux/pgtable.h The include/linux/pgtable.h is going to be the home of generic page table manipulation functions. Start with moving asm-generic/pgtable.h t
mm: introduce include/linux/pgtable.h The include/linux/pgtable.h is going to be the home of generic page table manipulation functions. Start with moving asm-generic/pgtable.h to include/linux/pgtable.h and make the latter include asm/pgtable.h. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-3-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
show more ...
|
Revision tags: v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4, v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7, v5.2.6, v5.2.5, v5.2.4, v5.2.3, v5.2.2, v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8, v5.1.7, v5.1.6, v5.1.5, v5.1.4, v5.1.3, v5.1.2, v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11, v5.0.10, v5.0.9, v5.0.8, v5.0.7, v5.0.6, v5.0.5, v5.0.4, v5.0.3, v4.19.29, v5.0.2, v4.19.28, v5.0.1, v4.19.27, v5.0, v4.19.26, v4.19.25, v4.19.24, v4.19.23, v4.19.22, v4.19.21, v4.19.20, v4.19.19, v4.19.18, v4.19.17, v4.19.16, v4.19.15, v4.19.14, v4.19.13, v4.19.12, v4.19.11, v4.19.10, v4.19.9, v4.19.8, v4.19.7, v4.19.6, v4.19.5, v4.19.4, v4.18.20, v4.19.3, v4.18.19, v4.19.2, v4.18.18, v4.18.17, v4.19.1, v4.19, v4.18.16, v4.18.15, v4.18.14, v4.18.13, v4.18.12, v4.18.11, v4.18.10, v4.18.9, v4.18.7, v4.18.6, v4.18.5, v4.17.18, v4.18.4, v4.18.3, v4.17.17, v4.18.2, v4.17.16, v4.17.15, v4.18.1, v4.18, v4.17.14, v4.17.13, v4.17.12, v4.17.11, v4.17.10, v4.17.9, v4.17.8, v4.17.7, v4.17.6, v4.17.5, v4.17.4, v4.17.3, v4.17.2, v4.17.1, v4.17, v4.16, v4.15, v4.13.16, v4.14 |
|
#
b2441318 |
| 01-Nov-2017 |
Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools
License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v4.13.5, v4.13, v4.12, v4.10.17, v4.10.16, v4.10.15, v4.10.14, v4.10.13, v4.10.12, v4.10.11, v4.10.10, v4.10.9, v4.10.8, v4.10.7, v4.10.6, v4.10.5, v4.10.4, v4.10.3, v4.10.2, v4.10.1, v4.10, v4.9, openbmc-4.4-20161121-1, v4.4.33, v4.4.32, v4.4.31, v4.4.30, v4.4.29, v4.4.28, v4.4.27, v4.7.10, openbmc-4.4-20161021-1, v4.7.9, v4.4.26, v4.7.8, v4.4.25, v4.4.24, v4.7.7, v4.8, v4.4.23, v4.7.6, v4.7.5, v4.4.22, v4.4.21, v4.7.4, v4.7.3, v4.4.20, v4.7.2, v4.4.19, openbmc-4.4-20160819-1, v4.7.1, v4.4.18, v4.4.17, openbmc-4.4-20160804-1, v4.4.16, v4.7, openbmc-4.4-20160722-1, openbmc-20160722-1, openbmc-20160713-1, v4.4.15, v4.6.4, v4.6.3, v4.4.14, v4.6.2, v4.4.13, openbmc-20160606-1, v4.6.1, v4.4.12, openbmc-20160521-1, v4.4.11, openbmc-20160518-1, v4.6, v4.4.10, openbmc-20160511-1, openbmc-20160505-1, v4.4.9, v4.4.8, v4.4.7, openbmc-20160329-2, openbmc-20160329-1, openbmc-20160321-1, v4.4.6, v4.5, v4.4.5, v4.4.4, v4.4.3, openbmc-20160222-1, v4.4.2, openbmc-20160212-1, openbmc-20160210-1, openbmc-20160202-2, openbmc-20160202-1, v4.4.1, openbmc-20160127-1, openbmc-20160120-1 |
|
#
e007c533 |
| 17-Jan-2016 |
Al Viro <viro@zeniv.linux.org.uk> |
ia64: move exports to definitions Here we have another kind of deviation from the default case - a difference between exporting functions and non-functions. EXPORT_DATA_SYMBOL... is
ia64: move exports to definitions Here we have another kind of deviation from the default case - a difference between exporting functions and non-functions. EXPORT_DATA_SYMBOL... is really different from EXPORT_SYMBOL... on ia64, and we need to use the right one when moving exports from *.c where C compiler has the required information to *.S, where we need to supply it manually. parisc64 will be another one like that. Tested-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
show more ...
|
Revision tags: v4.4, openbmc-20151217-1, openbmc-20151210-1, openbmc-20151202-1, openbmc-20151123-1, openbmc-20151118-1, openbmc-20151104-1, v4.3, openbmc-20151102-1, openbmc-20151028-1, v4.3-rc1, v4.2, v4.2-rc8, v4.2-rc7, v4.2-rc6, v4.2-rc5, v4.2-rc4, v4.2-rc3, v4.2-rc2, v4.2-rc1, v4.1, v4.1-rc8, v4.1-rc7 |
|
#
e55645ec |
| 02-Jun-2015 |
Luis R. Rodriguez <mcgrof@suse.com> |
ia64: remove paravirt code All the ia64 pvops code is now dead code since both xen and kvm support have been ripped out [0] [1]. Just that no one had troubled to rip this stuff out.
ia64: remove paravirt code All the ia64 pvops code is now dead code since both xen and kvm support have been ripped out [0] [1]. Just that no one had troubled to rip this stuff out. The only useful remaining pieces were the old pvops docs but that was recently also generalized and moved out from ia64 [2]. This has been run time tested on an ia64 Madison system. [0] 003f7de625890 "KVM: ia64: remove" since v3.19-rc1 [1] d52eefb47d4eb "ia64/xen: Remove Xen support for ia64" since v3.14-rc1 [2] "virtual: Documentation: simplify and generalize paravirt_ops.txt" Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
show more ...
|
Revision tags: v4.1-rc6, v4.1-rc5, v4.1-rc4, v4.1-rc3, v4.1-rc2, v4.1-rc1 |
|
#
4d66bcc7 |
| 14-Apr-2015 |
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> |
ia64: expose number of page table levels on Kconfig level We would want to use number of page table level to define mm_struct. Let's expose it as CONFIG_PGTABLE_LEVELS. We need
ia64: expose number of page table levels on Kconfig level We would want to use number of page table level to define mm_struct. Let's expose it as CONFIG_PGTABLE_LEVELS. We need to define PGTABLE_LEVELS before sourcing init/Kconfig: arch/Kconfig will define default value and it's sourced from init/Kconfig. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
show more ...
|
Revision tags: v4.0, v4.0-rc7, v4.0-rc6, v4.0-rc5, v4.0-rc4, v4.0-rc3, v4.0-rc2, v4.0-rc1, v3.19, v3.19-rc7, v3.19-rc6, v3.19-rc5, v3.19-rc4, v3.19-rc3, v3.19-rc2, v3.19-rc1, v3.18, v3.18-rc7, v3.18-rc6, v3.18-rc5, v3.18-rc4, v3.18-rc3, v3.18-rc2, v3.18-rc1, v3.17, v3.17-rc7, v3.17-rc6, v3.17-rc5, v3.17-rc4, v3.17-rc3, v3.17-rc2, v3.17-rc1, v3.16, v3.16-rc7, v3.16-rc6, v3.16-rc5, v3.16-rc4, v3.16-rc3, v3.16-rc2, v3.16-rc1, v3.15, v3.15-rc8, v3.15-rc7, v3.15-rc6, v3.15-rc5, v3.15-rc4, v3.15-rc3, v3.15-rc2, v3.15-rc1, v3.14 |
|
#
c0b5a64d |
| 28-Mar-2014 |
Tony Luck <tony.luck@intel.com> |
[IA64] Change default PSR.ac from '1' to '0' (Fix erratum #237) April 2014 Itanium processor specification update: http://www.intel.com/content/www/us/en/processors/itanium/itanium-
[IA64] Change default PSR.ac from '1' to '0' (Fix erratum #237) April 2014 Itanium processor specification update: http://www.intel.com/content/www/us/en/processors/itanium/itanium-specification-update.html describes this erratum: ========================================================================= 237. Under a complex set of conditions, store to load forwarding for a sub 8-byte load may complete incorrectly Problem: A load instruction may complete incorrectly when a code sequence using 4-byte or smaller load and store operations to the same address is executed in combination with specific timing of all the following concurrent conditions: store to load forwarding, alignment checking enabled, a mis-predicted branch, and complex cache utilization activity. Implication: The affected sub 8-byte instruction may complete incorrectly resulting in unpredictable system behavior. There is an extremely low probability of exposure due to the significant number of complex microarchitectural concurrent conditions required to encounter the erratum. Workaround: Set PSR.ac = 0 to completely avoid the erratum. Disabling Hyper-Threading will significantly reduce exposure to the conditions that contribute to encountering the erratum. Status: See the Summary Table of Changes for the affected steppings. ========================================================================= [Table of changes essentially lists all models from McKinley to Tukwila] The PSR.ac bit controls whether the processor will always generate an unaligned reference trap (0x5a00) for a misaligned data access (when PSR.ac=1) or if it will let the access succeed when running on a cpu that implements logic to handle some unaligned accesses. Way back in 2008 in commit b704882e70d87d7f56db5ff17e2253f3fa90e4f3 [IA64] Rationalize kernel mode alignment checking we made the decision to always enable strict checking. We were already doing so in trap/interrupt context because the common preamble code set this bit - but the rest of supervisor code (and by inheritance user code) ran with PSR.ac=0. We now reverse that decision and set PSR.ac=0 everywhere in the kernel (also inherited by user processes). This will avoid the erratum using the method described in the Itanium specification update. Net effect for users is that the processor will handle unaligned access when it can (typically with a tiny performance bubble in the pipeline ... but much less invasive than taking a trap and having the OS perform the access). Signed-off-by: Tony Luck <tony.luck@intel.com>
show more ...
|
Revision tags: v3.14-rc8, v3.14-rc7, v3.14-rc6, v3.14-rc5, v3.14-rc4, v3.14-rc3, v3.14-rc2, v3.14-rc1, v3.13, v3.13-rc8, v3.13-rc7, v3.13-rc6, v3.13-rc5, v3.13-rc4, v3.13-rc3, v3.13-rc2, v3.13-rc1, v3.12, v3.12-rc7, v3.12-rc6, v3.12-rc5, v3.12-rc4, v3.12-rc3, v3.12-rc2, v3.12-rc1, v3.11, v3.11-rc7, v3.11-rc6, v3.11-rc5, v3.11-rc4, v3.11-rc3, v3.11-rc2, v3.11-rc1, v3.10, v3.10-rc7, v3.10-rc6, v3.10-rc5, v3.10-rc4, v3.10-rc3, v3.10-rc2, v3.10-rc1, v3.9, v3.9-rc8, v3.9-rc7, v3.9-rc6, v3.9-rc5, v3.9-rc4, v3.9-rc3, v3.9-rc2, v3.9-rc1, v3.8, v3.8-rc7, v3.8-rc6, v3.8-rc5, v3.8-rc4, v3.8-rc3, v3.8-rc2, v3.8-rc1, v3.7, v3.7-rc8, v3.7-rc7, v3.7-rc6, v3.7-rc5, v3.7-rc4, v3.7-rc3, v3.7-rc2, v3.7-rc1, v3.6, v3.6-rc7, v3.6-rc6, v3.6-rc5, v3.6-rc4, v3.6-rc3, v3.6-rc2, v3.6-rc1 |
|
#
abf917cd |
| 25-Jul-2012 |
Frederic Weisbecker <fweisbec@gmail.com> |
cputime: Generic on-demand virtual cputime accounting If we want to stop the tick further idle, we need to be able to account the cputime without using the tick. Virtual based c
cputime: Generic on-demand virtual cputime accounting If we want to stop the tick further idle, we need to be able to account the cputime without using the tick. Virtual based cputime accounting solves that problem by hooking into kernel/user boundaries. However implementing CONFIG_VIRT_CPU_ACCOUNTING require low level hooks and involves more overhead. But we already have a generic context tracking subsystem that is required for RCU needs by archs which plan to shut down the tick outside idle. This patch implements a generic virtual based cputime accounting that relies on these generic kernel/user hooks. There are some upsides of doing this: - This requires no arch code to implement CONFIG_VIRT_CPU_ACCOUNTING if context tracking is already built (already necessary for RCU in full tickless mode). - We can rely on the generic context tracking subsystem to dynamically (de)activate the hooks, so that we can switch anytime between virtual and tick based accounting. This way we don't have the overhead of the virtual accounting when the tick is running periodically. And one downside: - There is probably more overhead than a native virtual based cputime accounting. But this relies on hooks that are already set anyway. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de>
show more ...
|
Revision tags: v3.5, v3.5-rc7, v3.5-rc6, v3.5-rc5, v3.5-rc4, v3.5-rc3, v3.5-rc2, v3.5-rc1, v3.4, v3.4-rc7, v3.4-rc6, v3.4-rc5, v3.4-rc4, v3.4-rc3, v3.4-rc2, v3.4-rc1 |
|
#
c140d879 |
| 28-Mar-2012 |
David Howells <dhowells@redhat.com> |
Disintegrate asm/system.h for IA64 Disintegrate asm/system.h for IA64. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Tony Luck <tony.luck@intel.com> cc: linux
Disintegrate asm/system.h for IA64 Disintegrate asm/system.h for IA64. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Tony Luck <tony.luck@intel.com> cc: linux-ia64@vger.kernel.org
show more ...
|
#
1f738978 |
| 01-Jun-2010 |
Linus Torvalds <torvalds@linux-foundation.org> |
Merge branch 'for-35' of git://repo.or.cz/linux-kbuild * 'for-35' of git://repo.or.cz/linux-kbuild: (81 commits) kbuild: Revert part of e8d400a to resolve a conflict kbuild: Fix
Merge branch 'for-35' of git://repo.or.cz/linux-kbuild * 'for-35' of git://repo.or.cz/linux-kbuild: (81 commits) kbuild: Revert part of e8d400a to resolve a conflict kbuild: Fix checking of scm-identifier variable gconfig: add support to show hidden options that have prompts menuconfig: add support to show hidden options which have prompts gconfig: remove show_debug option gconfig: remove dbg_print_ptype() and dbg_print_stype() kconfig: fix zconfdump() kconfig: some small fixes add random binaries to .gitignore kbuild: Include gen_initramfs_list.sh and the file list in the .d file kconfig: recalc symbol value before showing search results .gitignore: ignore *.lzo files headerdep: perlcritic warning scripts/Makefile.lib: Align the output of LZO kbuild: Generate modules.builtin in make modules_install Revert "kbuild: specify absolute paths for cscope" kbuild: Do not unnecessarily regenerate modules.builtin headers_install: use local file handles headers_check: fix perl warnings export_report: fix perl warnings ...
show more ...
|
Revision tags: v3.3, v3.3-rc7, v3.3-rc6, v3.3-rc5, v3.3-rc4, v3.3-rc3, v3.3-rc2, v3.3-rc1, v3.2, v3.2-rc7, v3.2-rc6, v3.2-rc5, v3.2-rc4, v3.2-rc3, v3.2-rc2, v3.2-rc1, v3.1, v3.1-rc10, v3.1-rc9, v3.1-rc8, v3.1-rc7, v3.1-rc6, v3.1-rc5, v3.1-rc4, v3.1-rc3, v3.1-rc2, v3.1-rc1, v3.0, v3.0-rc7, v3.0-rc6, v3.0-rc5, v3.0-rc4, v3.0-rc3, v3.0-rc2, v3.0-rc1, v2.6.39, v2.6.39-rc7, v2.6.39-rc6, v2.6.39-rc5, v2.6.39-rc4, v2.6.39-rc3, v2.6.39-rc2, v2.6.39-rc1, v2.6.38, v2.6.38-rc8, v2.6.38-rc7, v2.6.38-rc6, v2.6.38-rc5, v2.6.38-rc4, v2.6.38-rc3, v2.6.38-rc2, v2.6.38-rc1, v2.6.37, v2.6.37-rc8, v2.6.37-rc7, v2.6.37-rc6, v2.6.37-rc5, v2.6.37-rc4, v2.6.37-rc3, v2.6.37-rc2, v2.6.37-rc1, v2.6.36, v2.6.36-rc8, v2.6.36-rc7, v2.6.36-rc6, v2.6.36-rc5, v2.6.36-rc4, v2.6.36-rc3, v2.6.36-rc2, v2.6.36-rc1, v2.6.35, v2.6.35-rc6, v2.6.35-rc5, v2.6.35-rc4, v2.6.35-rc3, v2.6.35-rc2, v2.6.35-rc1, v2.6.34, v2.6.34-rc7, v2.6.34-rc6, v2.6.34-rc5, v2.6.34-rc4, v2.6.34-rc3, v2.6.34-rc2, v2.6.34-rc1, v2.6.33 |
|
#
2b55f367 |
| 19-Feb-2010 |
Denys Vlasenko <vda.linux@googlemail.com> |
Rename .text.ivt to .text..ivt. Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
|
Revision tags: v2.6.33-rc8 |
|
#
32974ad4 |
| 08-Feb-2010 |
Tony Luck <tony.luck@intel.com> |
[IA64] Remove COMPAT_IA32 support This has been broken since May 2008 when Al Viro killed altroot support. Since nobody has complained, it would appear that there are no users of thi
[IA64] Remove COMPAT_IA32 support This has been broken since May 2008 when Al Viro killed altroot support. Since nobody has complained, it would appear that there are no users of this code (A plausible theory since the main OSVs that support ia64 prefer to use the IA32-EL software emulation). Signed-off-by: Tony Luck <tony.luck@intel.com>
show more ...
|
Revision tags: v2.6.33-rc7, v2.6.33-rc6, v2.6.33-rc5, v2.6.33-rc4, v2.6.33-rc3, v2.6.33-rc2, v2.6.33-rc1, v2.6.32, v2.6.32-rc8, v2.6.32-rc7, v2.6.32-rc6, v2.6.32-rc5, v2.6.32-rc4, v2.6.32-rc3, v2.6.32-rc1, v2.6.32-rc2, v2.6.31, v2.6.31-rc9, v2.6.31-rc8, v2.6.31-rc7, v2.6.31-rc6, v2.6.31-rc5, v2.6.31-rc4, v2.6.31-rc3, v2.6.31-rc2, v2.6.31-rc1, v2.6.30, v2.6.30-rc8, v2.6.30-rc7, v2.6.30-rc6, v2.6.30-rc5, v2.6.30-rc4, v2.6.30-rc3, v2.6.30-rc2, v2.6.30-rc1, v2.6.29, v2.6.29-rc8 |
|
#
94752a79 |
| 04-Mar-2009 |
Isaku Yamahata <yamahata@valinux.co.jp> |
ia64/pv_ops: paravirtualize mov = ar.itc. paravirtualize mov reg = ar.itc. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Tony Luck <tony.luck@intel.com>
|
Revision tags: v2.6.29-rc7, v2.6.29-rc6, v2.6.29-rc5, v2.6.29-rc4, v2.6.29-rc3, v2.6.29-rc2, v2.6.29-rc1, v2.6.28, v2.6.28-rc9, v2.6.28-rc8, v2.6.28-rc7, v2.6.28-rc6, v2.6.28-rc5, v2.6.28-rc4, v2.6.28-rc3, v2.6.28-rc2, v2.6.28-rc1 |
|
#
749da791 |
| 16-Oct-2008 |
Isaku Yamahata <yamahata@valinux.co.jp> |
ia64/pv_ops: fix paravirtualization of ivt.S with CONFIG_SMP=n When CONFIG_SMP=n, three instruction in ivt.S were missed to paravirtualize. paravirtualize them. Signed-off-by: I
ia64/pv_ops: fix paravirtualization of ivt.S with CONFIG_SMP=n When CONFIG_SMP=n, three instruction in ivt.S were missed to paravirtualize. paravirtualize them. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Tony Luck <tony.luck@intel.com>
show more ...
|
Revision tags: v2.6.27, v2.6.27-rc9, v2.6.27-rc8, v2.6.27-rc7, v2.6.27-rc6, v2.6.27-rc5, v2.6.27-rc4, v2.6.27-rc3, v2.6.27-rc2 |
|
#
9b3cbf72 |
| 03-Aug-2008 |
Isaku Yamahata <yamahata@valinux.co.jp> |
[IA64] pv_ops: fix ivt.S paravirtualization Recent kernels are not booting on some HP systems (though it does boot on others). James and Willy reported the problem. James did the bi
[IA64] pv_ops: fix ivt.S paravirtualization Recent kernels are not booting on some HP systems (though it does boot on others). James and Willy reported the problem. James did the bisection to find the commit that caused the problem: 498c5170472ff0c03a29d22dbd33225a0be038f4. [IA64] pvops: paravirtualize ivt.S Two instructions were wrongly paravirtualized such that _FROM_ macro had been used where _TO_ was intended Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: "Wilcox, Matthew R" <matthew.r.wilcox@intel.com> Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Tony Luck <tony.luck@intel.com>
show more ...
|