arm64: irq: set the correct node for shadow call stack

commit 7b1a09e44dc64f4f5930659b6d14a27183c00705 upstream.

The init_irq_stacks() has been changed to use the correct node:
https://git.kernel.o

arm64: irq: set the correct node for shadow call stack

commit 7b1a09e44dc64f4f5930659b6d14a27183c00705 upstream.

The init_irq_stacks() has been changed to use the correct node:
https://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux.git/commit/?id=75b5e0bf90bf

The init_irq_scs() has the same issue with init_irq_stacks():
cpu_to_node() is not initialized yet, it does not work.

This patch uses early_cpu_to_node() to set the init_irq_scs()
with the correct node.

Signed-off-by: Huang Shijie <shijie@os.amperecomputing.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20231213012046.12014-1-shijie@os.amperecomputing.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

arm64: irq: set the correct node for VMAP stack

[ Upstream commit 75b5e0bf90bffaca4b1f19114065dc59f5cc161f ]

In current code, init_irq_stacks() will call cpu_to_node().
The cpu_to_node() depends on

arm64: irq: set the correct node for VMAP stack

[ Upstream commit 75b5e0bf90bffaca4b1f19114065dc59f5cc161f ]

In current code, init_irq_stacks() will call cpu_to_node().
The cpu_to_node() depends on percpu "numa_node" which is initialized in:
arch_call_rest_init() --> rest_init() -- kernel_init()
--> kernel_init_freeable() --> smp_prepare_cpus()

But init_irq_stacks() is called in init_IRQ() which is before
arch_call_rest_init().

So in init_irq_stacks(), the cpu_to_node() does not work, it
always return 0. In NUMA, it makes the node 1 cpu accesses the IRQ stack which
is in the node 0.

This patch fixes it by:
1.) export the early_cpu_to_node(), and use it in the init_irq_stacks().
2.) change init_irq_stacks() to __init function.

Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Huang Shijie <shijie@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20231124031513.81548-1-shijie@os.amperecomputing.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

arm64: move on_thread_stack() to <asm/stacktrace.h>

Currently on_thread_stack() is defined in <asm/processor.h>, depending
upon definitiong from <asm/stacktrace.h> despite this header not being
incl

arm64: move on_thread_stack() to <asm/stacktrace.h>

Currently on_thread_stack() is defined in <asm/processor.h>, depending
upon definitiong from <asm/stacktrace.h> despite this header not being
included. This ends up being fragile, and any user of on_thread_stack()
must include both <asm/processor.h> and <asm/stacktrace.h>.

We organised things this way due to header dependencies back in commit:

0b3e336601b82c6a ("arm64: Add support for STACKLEAK gcc plugin")

... but now that we no longer use current_top_of_stack(), and given that
stackleak includes <asm/stacktrace.h> via <linux/stackleak.h>, we no
longer need the definition to live in <asm/processor.h>.

Move on_thread_stack() to <asm/stacktrace.h>, where all its dependencies
are guaranteed to be defined. This requires having arm64's irq.c
explicitly include <asm/stacktrace.h>, and I've taken the opportunity to
sort the includes, which were slightly out of order.

There should be no functional change as a result of this patch.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221117120902.3974163-3-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>

show more ...

arm64: implement dynamic shadow call stack for Clang

Implement dynamic shadow call stack support on Clang, by parsing the
unwind tables at init time to locate all occurrences of PACIASP/AUTIASP
inst

arm64: implement dynamic shadow call stack for Clang

Implement dynamic shadow call stack support on Clang, by parsing the
unwind tables at init time to locate all occurrences of PACIASP/AUTIASP
instructions, and replacing them with the shadow call stack push and pop
instructions, respectively.

This is useful because the overhead of the shadow call stack is
difficult to justify on hardware that implements pointer authentication
(PAC), and given that the PAC instructions are executed as NOPs on
hardware that doesn't, we can just replace them without breaking
anything. As PACIASP/AUTIASP are guaranteed to be paired with respect to
manipulations of the return address, replacing them 1:1 with shadow call
stack pushes and pops is guaranteed to result in the desired behavior.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/r/20221027155908.1940624-4-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>

show more ...

arm64: run softirqs on the per-CPU IRQ stack

Currently arm64 supports per-CPU IRQ stack, but softirqs
are still handled in the task context.

Since any call to local_bh_enable() at any level in the

arm64: run softirqs on the per-CPU IRQ stack

Currently arm64 supports per-CPU IRQ stack, but softirqs
are still handled in the task context.

Since any call to local_bh_enable() at any level in the task's
call stack may trigger a softirq processing run, which could
potentially cause a task stack overflow if the combined stack
footprints exceed the stack's size, let's run these softirqs
on the IRQ stack as well.

Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20220815124739.15948-1-zhengqi.arch@bytedance.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

show more ...

arm64: irq: allow FIQs to be handled

On contemporary platforms we don't use FIQ, and treat any stray FIQ as a
fatal event. However, some platforms have an interrupt controller wired
to FIQ, and need

arm64: irq: allow FIQs to be handled

On contemporary platforms we don't use FIQ, and treat any stray FIQ as a
fatal event. However, some platforms have an interrupt controller wired
to FIQ, and need to handle FIQ as part of regular operation.

So that we can support both cases dynamically, this patch updates the
FIQ exception handling code to operate the same way as the IRQ handling
code, with its own handle_arch_fiq handler. Where a root FIQ handler is
not registered, an unexpected FIQ exception will trigger the default FIQ
handler, which will panic() as today. Where a root FIQ handler is
registered, handling of the FIQ is deferred to that handler.

As el0_fiq_invalid_compat is supplanted by el0_fiq, the former is
removed. For !CONFIG_COMPAT builds we never expect to take an exception
from AArch32 EL0, so we keep the common el0_fiq_invalid handler.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Hector Martin <marcan@marcan.st>
Cc: James Morse <james.morse@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210315115629.57191-7-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

show more ...

arm64: irq: rework root IRQ handler registration

If we accidentally unmask IRQs before we've registered a root IRQ
handler, handle_arch_irq will be NULL, and the IRQ exception handler
will branch to

arm64: irq: rework root IRQ handler registration

If we accidentally unmask IRQs before we've registered a root IRQ
handler, handle_arch_irq will be NULL, and the IRQ exception handler
will branch to a bogus address.

To make this easier to debug, this patch initialises handle_arch_irq to
a default handler which will panic(), making such problems easier to
debug. When we add support for FIQ handlers, we can follow the same
approach.

When we add support for a root FIQ handler, it's possible to have root
IRQ handler without an root FIQ handler, and in theory the inverse is
also possible. To permit this, and to keep the IRQ/FIQ registration
logic similar, this patch removes the panic in the absence of a root IRQ
controller. Instead, set_handle_irq() logs when a handler is registered,
which is sufficient for debug purposes.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Hector Martin <marcan@marcan.st>
Cc: James Morse <james.morse@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210315115629.57191-4-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

show more ...

arm64: don't use GENERIC_IRQ_MULTI_HANDLER

In subsequent patches we want to allow irqchip drivers to register as
FIQ handlers, with a set_handle_fiq() function. To keep the IRQ/FIQ
paths similar, we

arm64: don't use GENERIC_IRQ_MULTI_HANDLER

In subsequent patches we want to allow irqchip drivers to register as
FIQ handlers, with a set_handle_fiq() function. To keep the IRQ/FIQ
paths similar, we want arm64 to provide both set_handle_irq() and
set_handle_fiq(), rather than using GENERIC_IRQ_MULTI_HANDLER for the
former.

This patch adds an arm64-specific implementation of set_handle_irq().
There should be no functional change as a result of this patch.

Signed-off-by: Marc Zyngier <maz@kernel.org>
[Mark: use a single handler pointer]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Hector Martin <marcan@marcan.st>
Cc: James Morse <james.morse@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210315115629.57191-3-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

show more ...

arm64: scs: use vmapped IRQ and SDEI shadow stacks

Use scs_alloc() to allocate also IRQ and SDEI shadow stacks instead of
using statically allocated stacks.

Signed-off-by: Sami Tolvanen <samitolvan

arm64: scs: use vmapped IRQ and SDEI shadow stacks

Use scs_alloc() to allocate also IRQ and SDEI shadow stacks instead of
using statically allocated stacks.

Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201130233442.2562064-3-samitolvanen@google.com
[will: Move CONFIG_SHADOW_CALL_STACK check into init_irq_scs()]
Signed-off-by: Will Deacon <will@kernel.org>

show more ...

arm64: entry: move el1 irq/nmi logic to C

In preparation for reworking the EL1 irq/nmi entry code, move the
existing logic to C. We no longer need the asm_nmi_enter() and
asm_nmi_exit() wrappers, so

arm64: entry: move el1 irq/nmi logic to C

In preparation for reworking the EL1 irq/nmi entry code, move the
existing logic to C. We no longer need the asm_nmi_enter() and
asm_nmi_exit() wrappers, so these are removed. The new C functions are
marked noinstr, which prevents compiler instrumentation and runtime
probing.

In subsequent patches we'll want the new C helpers to be called in all
cases, so we don't bother wrapping the calls with ifdeferry. Even when
the new C functions are stubs the trivial calls are unlikely to have a
measurable impact on the IRQ or NMI paths anyway.

Prototypes are added to <asm/exception.h> as otherwise (in some
configurations) GCC will complain about the lack of a forward
declaration. We already do this for existing function, e.g.
enter_from_user_mode().

The new helpers are marked as noinstr (which prevents all
instrumentation, tracing, and kprobes). Otherwise, there should be no
functional change as a result of this patch.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201130115950.22492-7-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>

show more ...

arm64: Remove custom IRQ stat accounting

Let's switch the arm64 code to the core accounting, which already
does everything we need.

Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Acke

arm64: Remove custom IRQ stat accounting

Let's switch the arm64 code to the core accounting, which already
does everything we need.

Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>

show more ...

arm64: fix kernel stack overflow in kdump capture kernel

When enabling ARM64_PSEUDO_NMI feature in kdump capture kernel, it will
report a kernel stack overflow exception:

[ 0.000000] CPU feature

arm64: fix kernel stack overflow in kdump capture kernel

When enabling ARM64_PSEUDO_NMI feature in kdump capture kernel, it will
report a kernel stack overflow exception:

[ 0.000000] CPU features: detected: IRQ priority masking
[ 0.000000] alternatives: patching kernel code
[ 0.000000] Insufficient stack space to handle exception!
[ 0.000000] ESR: 0x96000044 -- DABT (current EL)
[ 0.000000] FAR: 0x0000000000000040
[ 0.000000] Task stack: [0xffff0000097f0000..0xffff0000097f4000]
[ 0.000000] IRQ stack: [0x0000000000000000..0x0000000000004000]
[ 0.000000] Overflow stack: [0xffff80002b7cf290..0xffff80002b7d0290]
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.19.34-lw+ #3
[ 0.000000] pstate: 400003c5 (nZcv DAIF -PAN -UAO)
[ 0.000000] pc : el1_sync+0x0/0xb8
[ 0.000000] lr : el1_irq+0xb8/0x140
[ 0.000000] sp : 0000000000000040
[ 0.000000] pmr_save: 00000070
[ 0.000000] x29: ffff0000097f3f60 x28: ffff000009806240
[ 0.000000] x27: 0000000080000000 x26: 0000000000004000
[ 0.000000] x25: 0000000000000000 x24: ffff000009329028
[ 0.000000] x23: 0000000040000005 x22: ffff000008095c6c
[ 0.000000] x21: ffff0000097f3f70 x20: 0000000000000070
[ 0.000000] x19: ffff0000097f3e30 x18: ffffffffffffffff
[ 0.000000] x17: 0000000000000000 x16: 0000000000000000
[ 0.000000] x15: ffff0000097f9708 x14: ffff000089a382ef
[ 0.000000] x13: ffff000009a382fd x12: ffff000009824000
[ 0.000000] x11: ffff0000097fb7b0 x10: ffff000008730028
[ 0.000000] x9 : ffff000009440018 x8 : 000000000000000d
[ 0.000000] x7 : 6b20676e69686374 x6 : 000000000000003b
[ 0.000000] x5 : 0000000000000000 x4 : ffff000008093600
[ 0.000000] x3 : 0000000400000008 x2 : 7db2e689fc2b8e00
[ 0.000000] x1 : 0000000000000000 x0 : ffff0000097f3e30
[ 0.000000] Kernel panic - not syncing: kernel stack overflow
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.19.34-lw+ #3
[ 0.000000] Call trace:
[ 0.000000] dump_backtrace+0x0/0x1b8
[ 0.000000] show_stack+0x24/0x30
[ 0.000000] dump_stack+0xa8/0xcc
[ 0.000000] panic+0x134/0x30c
[ 0.000000] __stack_chk_fail+0x0/0x28
[ 0.000000] handle_bad_stack+0xfc/0x108
[ 0.000000] __bad_stack+0x90/0x94
[ 0.000000] el1_sync+0x0/0xb8
[ 0.000000] init_gic_priority_masking+0x4c/0x70
[ 0.000000] smp_prepare_boot_cpu+0x60/0x68
[ 0.000000] start_kernel+0x1e8/0x53c
[ 0.000000] ---[ end Kernel panic - not syncing: kernel stack overflow ]---

The reason is init_gic_priority_masking() may unmask PSR.I while the
irq stacks are not inited yet. Some "NMI" could be raised unfortunately
and it will just go into this exception.

In this patch, we just write the PMR in smp_prepare_boot_cpu(), and delay
unmasking PSR.I after irq stacks inited in init_IRQ().

Fixes: e79321883842 ("arm64: Switch to PMR masking when starting CPUs")
Cc: Will Deacon <will.deacon@arm.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Wei Li <liwei391@huawei.com>
[JT: make init_gic_priority_masking() not modify daif, rebase on other
priority masking fixes]
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

show more ...

arm64: Fix interrupt tracing in the presence of NMIs

In the presence of any form of instrumentation, nmi_enter() should be
done before calling any traceable code and any instrumentation code.

Curre

arm64: Fix interrupt tracing in the presence of NMIs

In the presence of any form of instrumentation, nmi_enter() should be
done before calling any traceable code and any instrumentation code.

Currently, nmi_enter() is done in handle_domain_nmi(), which is much
too late as instrumentation code might get called before. Move the
nmi_enter/exit() calls to the arch IRQ vector handler.

On arm64, it is not possible to know if the IRQ vector handler was
called because of an NMI before acknowledging the interrupt. However, It
is possible to know whether normal interrupts could be taken in the
interrupted context (i.e. if taking an NMI in that context could
introduce a potential race condition).

When interrupting a context with IRQs disabled, call nmi_enter() as soon
as possible. In contexts with IRQs enabled, defer this to the interrupt
controller, which is in a better position to know if an interrupt taken
is an NMI.

Fixes: bc3c03ccb464 ("arm64: Enable the support of pseudo-NMIs")
Cc: <stable@vger.kernel.org> # 5.1.x-
Cc: Will Deacon <will.deacon@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

show more ...

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 234

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of th

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 234

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with this program if not see http www gnu org
licenses

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-only

has been chosen to replace the boilerplate/reference in 503 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Enrico Weigelt <info@metux.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190602204653.811534538@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

arm64: Fix HCR.TGE status for NMI contexts

When using VHE, the host needs to clear HCR_EL2.TGE bit in order
to interact with guest TLBs, switching from EL2&0 translation regime
to EL1&0.

However, s

arm64: Fix HCR.TGE status for NMI contexts

When using VHE, the host needs to clear HCR_EL2.TGE bit in order
to interact with guest TLBs, switching from EL2&0 translation regime
to EL1&0.

However, some non-maskable asynchronous event could happen while TGE is
cleared like SDEI. Because of this address translation operations
relying on EL2&0 translation regime could fail (tlb invalidation,
userspace access, ...).

Fix this by properly setting HCR_EL2.TGE when entering NMI context and
clear it if necessary when returning to the interrupted context.

Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Suggested-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: James Morse <james.morse@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: linux-arch@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

show more ...

arm64: Use the new GENERIC_IRQ_MULTI_HANDLER

It appears arm64 copied arm's GENERIC_IRQ_MULTI_HANDLER code, but made
it unconditional.

Converts the arm64 code to use the new generic code, which simp

arm64: Use the new GENERIC_IRQ_MULTI_HANDLER

It appears arm64 copied arm's GENERIC_IRQ_MULTI_HANDLER code, but made
it unconditional.

Converts the arm64 code to use the new generic code, which simply consists
of deleting the arm64 code and setting MULTI_IRQ_HANDLER instead.

Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: linux@armlinux.org.uk
Cc: catalin.marinas@arm.com
Cc: Will Deacon <will.deacon@arm.com>
Cc: jonas@southpole.se
Cc: stefan.kristiansson@saunalahti.fi
Cc: shorne@gmail.com
Cc: jason@lakedaemon.net
Cc: marc.zyngier@arm.com
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: nicolas.pitre@linaro.org
Cc: vladimir.murzin@arm.com
Cc: keescook@chromium.org
Cc: jinb.park7@gmail.com
Cc: yamada.masahiro@socionext.com
Cc: alexandre.belloni@bootlin.com
Cc: pombredanne@nexb.com
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: kstewart@linuxfoundation.org
Cc: jhogan@kernel.org
Cc: mark.rutland@arm.com
Cc: ard.biesheuvel@linaro.org
Cc: james.morse@arm.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: openrisc@lists.librecores.org
Link: https://lkml.kernel.org/r/20180622170126.6308-4-palmer@sifive.com

show more ...

arm64: Add vmap_stack header file

Today the arm64 arch code allocates an extra IRQ stack per-cpu. If we
also have SDEI and VMAP stacks we need two extra per-cpu VMAP stacks.

Move the VMAP stack all

arm64: Add vmap_stack header file

Today the arm64 arch code allocates an extra IRQ stack per-cpu. If we
also have SDEI and VMAP stacks we need two extra per-cpu VMAP stacks.

Move the VMAP stack allocation out to a helper in a new header file.
This avoids missing THREADINFO_GFP, or getting the all-important alignment
wrong.

Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

show more ...

arm64: add basic VMAP_STACK support

This patch enables arm64 to be built with vmap'd task and IRQ stacks.

As vmap'd stacks are mapped at page granularity, stacks must be a multiple of
PAGE_SIZE. Th

arm64: add basic VMAP_STACK support

This patch enables arm64 to be built with vmap'd task and IRQ stacks.

As vmap'd stacks are mapped at page granularity, stacks must be a multiple of
PAGE_SIZE. This means that a 64K page kernel must use stacks of at least 64K in
size.

To minimize the increase in Image size, IRQ stacks are dynamically allocated at
boot time, rather than embedding the boot CPU's IRQ stack in the kernel image.

This patch was co-authored by Ard Biesheuvel and Mark Rutland.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Tested-by: Laura Abbott <labbott@redhat.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>

show more ...

arm64: use an irq stack pointer

We allocate our IRQ stacks using a percpu array. This allows us to generate our
IRQ stack pointers with adr_this_cpu, but bloats the kernel Image with the boot
CPU's

arm64: use an irq stack pointer

We allocate our IRQ stacks using a percpu array. This allows us to generate our
IRQ stack pointers with adr_this_cpu, but bloats the kernel Image with the boot
CPU's IRQ stack. Additionally, these are packed with other percpu variables,
and aren't guaranteed to have guard pages.

When we enable VMAP_STACK we'll want to vmap our IRQ stacks also, in order to
provide guard pages and to permit more stringent alignment requirements. Doing
so will require that we use a percpu pointer to each IRQ stack, rather than
allocating a percpu IRQ stack in the kernel image.

This patch updates our IRQ stack code to use a percpu pointer to the base of
each IRQ stack. This will allow us to change the way the stack is allocated
with minimal changes elsewhere. In some cases we may try to backtrace before
the IRQ stack pointers are initialised, so on_irq_stack() is updated to account
for this.

In testing with cyclictest, there was no measureable difference between using
adr_this_cpu (for irq_stack) and ldr_this_cpu (for irq_stack_ptr) in the IRQ
entry path.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Tested-by: Laura Abbott <labbott@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>

show more ...

arm64: remove irq_count and do_softirq_own_stack()

sysrq_handle_reboot() re-enables interrupts while on the irq stack. The
irq_stack implementation wrongly assumed this would only ever happen
via th

arm64: remove irq_count and do_softirq_own_stack()

sysrq_handle_reboot() re-enables interrupts while on the irq stack. The
irq_stack implementation wrongly assumed this would only ever happen
via the softirq path, allowing it to update irq_count late, in
do_softirq_own_stack().

This means if an irq occurs in sysrq_handle_reboot(), during
emergency_restart() the stack will be corrupted, as irq_count wasn't
updated.

Lose the optimisation, and instead of moving the adding/subtracting of
irq_count into irq_stack_entry/irq_stack_exit, remove it, and compare
sp_el0 (struct thread_info) with sp & ~(THREAD_SIZE - 1). This tells us
if we are on a task stack, if so, we can safely switch to the irq stack.
Finally, remove do_softirq_own_stack(), we don't need it anymore.

Reported-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
[will: use get_thread_info macro]
Signed-off-by: Will Deacon <will.deacon@arm.com>

show more ...

arm64: Add do_softirq_own_stack() and enable irq_stacks

entry.S is modified to switch to the per_cpu irq_stack during el{0,1}_irq.
irq_count is used to detect recursive interrupts on the irq_stack,

arm64: Add do_softirq_own_stack() and enable irq_stacks

entry.S is modified to switch to the per_cpu irq_stack during el{0,1}_irq.
irq_count is used to detect recursive interrupts on the irq_stack, it is
updated late by do_softirq_own_stack(), when called on the irq_stack, before
__do_softirq() re-enables interrupts to process softirqs.

do_softirq_own_stack() is added by this patch, but does not yet switch
stack.

This patch adds the dummy stack frame and data needed by the previous
stack tracing patches.

Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

show more ...

arm64: Modify stack trace and dump for use with irq_stack

This patch allows unwind_frame() to traverse from interrupt stack to task
stack correctly. It requires data from a dummy stack frame, create

arm64: Modify stack trace and dump for use with irq_stack

This patch allows unwind_frame() to traverse from interrupt stack to task
stack correctly. It requires data from a dummy stack frame, created
during irq_stack_entry(), added by a later patch.

A similar approach is taken to modify dump_backtrace(), which expects to
find struct pt_regs underneath any call to functions marked __exception.
When on an irq_stack, the struct pt_regs is stored on the old task stack,
the location of which is stored in the dummy stack frame.

Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
[james.morse: merged two patches, reworked for per_cpu irq_stacks, and
no alignment guarantees, added irq_stack definitions]
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

show more ...

arm64: fix a migrating irq bug when hotplug cpu

When cpu is disabled, all irqs will be migratged to another cpu.
In some cases, a new affinity is different, the old affinity need
to be updated and i

arm64: fix a migrating irq bug when hotplug cpu

When cpu is disabled, all irqs will be migratged to another cpu.
In some cases, a new affinity is different, the old affinity need
to be updated and if irq_set_affinity's return value is IRQ_SET_MASK_OK_DONE,
the old affinity can not be updated. Fix it by using irq_do_set_affinity.

And migrating interrupts is a core code matter, so use the generic
function irq_migrate_all_off_this_cpu() to migrate interrupts in
kernel/irq/migration.c.

Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Russell King - ARM Linux <linux@arm.linux.org.uk>
Cc: Hanjun Guo <hanjun.guo@linaro.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

show more ...

arm64: force CONFIG_SMP=y and remove redundant #ifdefs

Nobody seems to be producing !SMP systems anymore, so this is just
becoming a source of kernel bugs, particularly if people want to use
coheren

arm64: force CONFIG_SMP=y and remove redundant #ifdefs

Nobody seems to be producing !SMP systems anymore, so this is just
becoming a source of kernel bugs, particularly if people want to use
coherent DMA with non-shared pages.

This patch forces CONFIG_SMP=y for arm64, removing a modest amount of
code in the process.

Signed-off-by: Will Deacon <will.deacon@arm.com>

show more ...

ARM64/irq: Use access helper irq_data_get_affinity_mask()

This is a preparatory patch for moving irq_data struct members.

Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Reviewed-by: Hanjun Gu

ARM64/irq: Use access helper irq_data_get_affinity_mask()

This is a preparatory patch for moving irq_data struct members.

Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

show more ...