arm64: cpuidle: remove generic cpuidle support

The arm64 support of the generic ARM cpuidle driver was removed. This
let us remove all support code for it.

Signed-off-by: Michael Walle <michael@wal

arm64: cpuidle: remove generic cpuidle support

The arm64 support of the generic ARM cpuidle driver was removed. This
let us remove all support code for it.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20220529181329.2345722-3-michael@walle.cc
Signed-off-by: Will Deacon <will@kernel.org>

show more ...

arm64: fix some spelling mistakes in the comments by codespell

arch/arm64/include/asm/cpu_ops.h:24: necesary ==> necessary
arch/arm64/include/asm/kvm_arm.h:69: maintainance ==> maintenance
arch/arm6

arm64: fix some spelling mistakes in the comments by codespell

arch/arm64/include/asm/cpu_ops.h:24: necesary ==> necessary
arch/arm64/include/asm/kvm_arm.h:69: maintainance ==> maintenance
arch/arm64/include/asm/cpufeature.h:361: capabilties ==> capabilities
arch/arm64/kernel/perf_regs.c:19: compatability ==> compatibility
arch/arm64/kernel/smp_spin_table.c:86: endianess ==> endianness
arch/arm64/kernel/smp_spin_table.c:88: endianess ==> endianness
arch/arm64/kvm/vgic/vgic-mmio-v3.c:1004: targetting ==> targeting
arch/arm64/kvm/vgic/vgic-mmio-v3.c:1005: targetting ==> targeting

Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Link: https://lore.kernel.org/r/20200828031822.35928-1-nixiaoming@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>

show more ...

arm64: Introduce get_cpu_ops() helper function

This introduces get_cpu_ops() to return the CPU operations according to
the given CPU index. For now, it simply returns the @cpu_ops[cpu] as
before. Al

arm64: Introduce get_cpu_ops() helper function

This introduces get_cpu_ops() to return the CPU operations according to
the given CPU index. For now, it simply returns the @cpu_ops[cpu] as
before. Also, helper function __cpu_try_die() is introduced to be shared
by cpu_die() and ipi_cpu_crash_stop(). So it shouldn't introduce any
functional changes.

Signed-off-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>

show more ...

arm64: Rename cpu_read_ops() to init_cpu_ops()

This renames cpu_read_ops() to init_cpu_ops() as the function is only
called in initialization phase. Also, we will introduce get_cpu_ops() in
the subs

arm64: Rename cpu_read_ops() to init_cpu_ops()

This renames cpu_read_ops() to init_cpu_ops() as the function is only
called in initialization phase. Also, we will introduce get_cpu_ops() in
the subsequent patches, to retireve the CPU operation by the given CPU
index. The usage of cpu_read_ops() and get_cpu_ops() are difficult to be
distinguished from their names.

Signed-off-by: Gavin Shan <gshan@redhat.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

show more ...

arm64: smp: disable hotplug on trusted OS resident CPU

The trusted OS may reject CPU_OFF calls to its resident CPU, so we must
avoid issuing those. We never migrate a Trusted OS and we already take

arm64: smp: disable hotplug on trusted OS resident CPU

The trusted OS may reject CPU_OFF calls to its resident CPU, so we must
avoid issuing those. We never migrate a Trusted OS and we already take
care to prevent CPU_OFF PSCI call. However, this is not reflected
explicitly to the userspace. Any user can attempt to hotplug trusted OS
resident CPU. The entire motion of going through the various state
transitions in the CPU hotplug state machine gets executed and the
PSCI layer finally refuses to make CPU_OFF call.

This results is unnecessary unwinding of CPU hotplug state machine in
the kernel. Instead we can mark the trusted OS resident CPU as not
available for hotplug, so that the user attempt or request to do the
same will get immediately rejected.

Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>

show more ...

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 234

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of th

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 234

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with this program if not see http www gnu org
licenses

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-only

has been chosen to replace the boilerplate/reference in 503 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Enrico Weigelt <info@metux.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190602204653.811534538@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

ARM64: kernel: unify ACPI and DT cpus initialization

The code that initializes cpus on arm64 is currently split in two
different code paths that carry out DT and ACPI cpus initialization.

Most of t

ARM64: kernel: unify ACPI and DT cpus initialization

The code that initializes cpus on arm64 is currently split in two
different code paths that carry out DT and ACPI cpus initialization.

Most of the code executing SMP initialization is common and should
be merged to reduce discrepancies between ACPI and DT initialization
and to have code initializing cpus in a single common place in the
kernel.

This patch refactors arm64 SMP cpus initialization code to merge
ACPI and DT boot paths in a common file and to create sanity
checks that can be reused by both boot methods.

Current code assumes PSCI is the only available boot method
when arm64 boots with ACPI; this can be easily extended if/when
the ACPI parking protocol is merged into the kernel.

Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Hanjun Guo <hanjun.guo@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Hanjun Guo <hanjun.guo@linaro.org>
Tested-by: Mark Rutland <mark.rutland@arm.com> [DT]
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

show more ...

ARM64: kernel: make cpu_ops hooks DT agnostic

ARM64 CPU operations such as cpu_init and cpu_init_idle take
a struct device_node pointer as a parameter, which corresponds to
the device tree node of t

ARM64: kernel: make cpu_ops hooks DT agnostic

ARM64 CPU operations such as cpu_init and cpu_init_idle take
a struct device_node pointer as a parameter, which corresponds to
the device tree node of the logical cpu on which the operation
has to be applied.

With the advent of ACPI on arm64, where MADT static table entries
are used to initialize cpus, the device tree node parameter
in cpu_ops hooks become useless when booting with ACPI, since
in that case cpu device tree nodes are not present and can not be
used for cpu initialization.

The current cpu_init hook requires a struct device_node pointer
parameter because it is called while parsing the device tree to
initialize CPUs, when the cpu_logical_map (that is used to match
a cpu node reg property to a device tree node) for a given logical
cpu id is not set up yet. This means that the cpu_init hook cannot
rely on the of_get_cpu_node function to retrieve the device tree
node corresponding to the logical cpu id passed in as parameter,
so the cpu device tree node must be passed in as a parameter to fix
this catch-22 dependency cycle.

This patch reshuffles the cpu_logical_map initialization code so
that the cpu_init cpu_ops hook can safely use the of_get_cpu_node
function to retrieve the cpu device tree node, removing the need for
the device tree node pointer parameter.

In the process, the patch removes device tree node parameters
from all cpu_ops hooks, in preparation for SMP DT/ACPI cpus
initialization consolidation.

Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Hanjun Guo <hanjun.guo@linaro.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Hanjun Guo <hanjun.guo@linaro.org>
Tested-by: Mark Rutland <mark.rutland@arm.com> [DT]
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

show more ...

ARM64 / ACPI: Parse MADT for SMP initialization

MADT contains the information for MPIDR which is essential for
SMP initialization, parse the GIC cpu interface structures to
get the MPIDR value and m

ARM64 / ACPI: Parse MADT for SMP initialization

MADT contains the information for MPIDR which is essential for
SMP initialization, parse the GIC cpu interface structures to
get the MPIDR value and map it to cpu_logical_map(), and add
enabled cpu with valid MPIDR into cpu_possible_map.

ACPI 5.1 only has two explicit methods to boot up SMP, PSCI and
Parking protocol, but the Parking protocol is only specified for
ARMv7 now, so make PSCI as the only way for the SMP boot protocol
before some updates for the ACPI spec or the Parking protocol spec.

Parking protocol patches for SMP boot will be sent to upstream when
the new version of Parking protocol is ready.

CC: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
CC: Catalin Marinas <catalin.marinas@arm.com>
CC: Will Deacon <will.deacon@arm.com>
CC: Mark Rutland <mark.rutland@arm.com>
Tested-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Tested-by: Yijing Wang <wangyijing@huawei.com>
Tested-by: Mark Langsdorf <mlangsdo@redhat.com>
Tested-by: Jon Masters <jcm@redhat.com>
Tested-by: Timur Tabi <timur@codeaurora.org>
Tested-by: Robert Richter <rrichter@cavium.com>
Acked-by: Robert Richter <rrichter@cavium.com>
Acked-by: Olof Johansson <olof@lixom.net>
Reviewed-by: Grant Likely <grant.likely@linaro.org>
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Tomasz Nowicki <tomasz.nowicki@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>

show more ...

arm64: kernel: remove ARM64_CPU_SUSPEND config option

ARM64_CPU_SUSPEND config option was introduced to make code providing
context save/restore selectable only on platforms requiring power
manageme

arm64: kernel: remove ARM64_CPU_SUSPEND config option

ARM64_CPU_SUSPEND config option was introduced to make code providing
context save/restore selectable only on platforms requiring power
management capabilities.

Currently ARM64_CPU_SUSPEND depends on the PM_SLEEP config option which
in turn is set by the SUSPEND config option.

The introduction of CPU_IDLE for arm64 requires that code configured
by ARM64_CPU_SUSPEND (context save/restore) should be compiled in
in order to enable the CPU idle driver to rely on CPU operations
carrying out context save/restore.

The ARM64_CPUIDLE config option (ARM64 generic idle driver) is therefore
forced to select ARM64_CPU_SUSPEND, even if there may be (ie PM_SLEEP)
failed dependencies, which is not a clean way of handling the kernel
configuration option.

For these reasons, this patch removes the ARM64_CPU_SUSPEND config option
and makes the context save/restore dependent on CPU_PM, which is selected
whenever either SUSPEND or CPU_IDLE are configured, cleaning up dependencies
in the process.

This way, code previously configured through ARM64_CPU_SUSPEND is
compiled in whenever a power management subsystem requires it to be
present in the kernel (SUSPEND || CPU_IDLE), which is the behaviour
expected on ARM64 kernels.

The cpu_suspend and cpu_init_idle CPU operations are added only if
CPU_IDLE is selected, since they are CPU_IDLE specific methods and
should be grouped and defined accordingly.

PSCI CPU operations are updated to reflect the introduced changes.

Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

show more ...

arm64: Remove unneeded extern keyword

Function prototypes are never definitions, so remove any 'extern' keyword
from the funcion prototypes in cpu_ops.h. Fixes warnings emited by
checkpatch.

Signed

arm64: Remove unneeded extern keyword

Function prototypes are never definitions, so remove any 'extern' keyword
from the funcion prototypes in cpu_ops.h. Fixes warnings emited by
checkpatch.

Signed-off-by: Geoff Levand <geoff@infradead.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

show more ...

arm64: kernel: introduce cpu_init_idle CPU operation

The CPUidle subsystem on ARM64 machines requires the idle states
implementation back-end to initialize idle states parameter upon
boot. This patc

arm64: kernel: introduce cpu_init_idle CPU operation

The CPUidle subsystem on ARM64 machines requires the idle states
implementation back-end to initialize idle states parameter upon
boot. This patch adds a hook in the CPU operations structure that
should be initialized by the CPU operations back-end in order to
provide a function that initializes cpu idle states.

This patch also adds the infrastructure to arm64 kernel required
to export the CPU operations based initialization interface, so
that drivers (ie CPUidle) can use it when they are initialized
at probe time.

Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

show more ...

ARM: Check if a CPU has gone offline

PSCIv0.2 adds a new function called AFFINITY_INFO, which
can be used to query if a specified CPU has actually gone
offline. Calling this function via cpu_kill en

ARM: Check if a CPU has gone offline

PSCIv0.2 adds a new function called AFFINITY_INFO, which
can be used to query if a specified CPU has actually gone
offline. Calling this function via cpu_kill ensures that
a CPU has quiesced after a call to cpu_die. This helps
prevent the CPU from doing arbitrary bad things when data
or instructions are clobbered (as happens with kexec)
in the window between a CPU announcing that it is dead
and said CPU leaving the kernel.

Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>

show more ...

arm64: kernel: cpu_{suspend/resume} implementation

Kernel subsystems like CPU idle and suspend to RAM require a generic
mechanism to suspend a processor, save its context and put it into
a quiescent

arm64: kernel: cpu_{suspend/resume} implementation

Kernel subsystems like CPU idle and suspend to RAM require a generic
mechanism to suspend a processor, save its context and put it into
a quiescent state. The cpu_{suspend}/{resume} implementation provides
such a framework through a kernel interface allowing to save/restore
registers, flush the context to DRAM and suspend/resume to/from
low-power states where processor context may be lost.

The CPU suspend implementation relies on the suspend protocol registered
in CPU operations to carry out a suspend request after context is
saved and flushed to DRAM. The cpu_suspend interface:

int cpu_suspend(unsigned long arg);

allows to pass an opaque parameter that is handed over to the suspend CPU
operations back-end so that it can take action according to the
semantics attached to it. The arg parameter allows suspend to RAM and CPU
idle drivers to communicate to suspend protocol back-ends; it requires
standardization so that the interface can be reused seamlessly across
systems, paving the way for generic drivers.

Context memory is allocated on the stack, whose address is stashed in a
per-cpu variable to keep track of it and passed to core functions that
save/restore the registers required by the architecture.

Even though, upon successful execution, the cpu_suspend function shuts
down the suspending processor, the warm boot resume mechanism, based
on the cpu_resume function, makes the resume path operate as a
cpu_suspend function return, so that cpu_suspend can be treated as a C
function by the caller, which simplifies coding the PM drivers that rely
on the cpu_suspend API.

Upon context save, the minimal amount of memory is flushed to DRAM so
that it can be retrieved when the MMU is off and caches are not searched.

The suspend CPU operation, depending on the required operations (eg CPU vs
Cluster shutdown) is in charge of flushing the cache hierarchy either
implicitly (by calling firmware implementations like PSCI) or explicitly
by executing the required cache maintainance functions.

Debug exceptions are disabled during cpu_{suspend}/{resume} operations
so that debug registers can be saved and restored properly preventing
preemption from debug agents enabled in the kernel.

Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>

show more ...

arm64: add CPU_HOTPLUG infrastructure

This patch adds the basic infrastructure necessary to support
CPU_HOTPLUG on arm64, based on the arm implementation. Actual hotplug
support will depend on an im

arm64: add CPU_HOTPLUG infrastructure

This patch adds the basic infrastructure necessary to support
CPU_HOTPLUG on arm64, based on the arm implementation. Actual hotplug
support will depend on an implementation's cpu_operations (e.g. PSCI).

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

show more ...

arm64: read enable-method for CPU0

With the advent of CPU_HOTPLUG, the enable-method property for CPU0 may
tells us something useful (i.e. how to hotplug it back on), so we must
read it along with a

arm64: read enable-method for CPU0

With the advent of CPU_HOTPLUG, the enable-method property for CPU0 may
tells us something useful (i.e. how to hotplug it back on), so we must
read it along with all the enable-method for all the other CPUs. Even
on UP the enable-method may tell us useful information (e.g. if a core
has some mechanism that might be usable for cpuidle), so we should
always read it.

This patch factors out the reading of the enable method, and ensures
that CPU0's enable method is read regardless of whether the kernel is
built with SMP support.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

show more ...

arm64: factor out spin-table boot method

The arm64 kernel has an internal holding pen, which is necessary for
some systems where we can't bring CPUs online individually and must hold
multiple CPUs i

arm64: factor out spin-table boot method

The arm64 kernel has an internal holding pen, which is necessary for
some systems where we can't bring CPUs online individually and must hold
multiple CPUs in a safe area until the kernel is able to handle them.
The current SMP infrastructure for arm64 is closely coupled to this
holding pen, and alternative boot methods must launch CPUs into the pen,
where they sit before they are launched into the kernel proper.

With PSCI (and possibly other future boot methods), we can bring CPUs
online individually, and need not perform the secondary_holding_pen
dance. Instead, this patch factors the holding pen management code out
to the spin-table boot method code, as it is the only boot method
requiring the pen.

A new entry point for secondaries, secondary_entry is added for other
boot methods to use, which bypasses the holding pen and its associated
overhead when bringing CPUs online. The smp.pen.text section is also
removed, as the pen can live in head.text without problem.

The cpu_operations structure is extended with two new functions,
cpu_boot and cpu_postboot, for bringing a cpu into the kernel and
performing any post-boot cleanup required by a bootmethod (e.g.
resetting the secondary_holding_pen_release to INVALID_HWID).
Documentation is added for cpu_operations.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

show more ...

arm64: reorganise smp_enable_ops

For hotplug support, we're going to want a place to store operations
that do more than bring CPUs online, and it makes sense to group these
with our current smp_enab

arm64: reorganise smp_enable_ops

For hotplug support, we're going to want a place to store operations
that do more than bring CPUs online, and it makes sense to group these
with our current smp_enable_ops. For cpuidle support, we'll want to
group additional functions, and we may want them even for UP kernels.

This patch renames smp_enable_ops to the more general cpu_operations,
and pulls the definitions out of smp code such that they can be used in
UP kernels. While we're at it, fix up instances of the cpu parameter to
be an unsigned int, drop the init markings and rename the *_cpu
functions to cpu_* to reduce future churn when cpu_operations is
extended.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

show more ...

arm64: fix some spelling mistakes in the comments by codespell

arch/arm64/include/asm/cpu_ops.h:24: necesary ==> necessary
arch/arm64/include/asm/kvm_arm.h:69: maintainance ==> maintenan

arm64: fix some spelling mistakes in the comments by codespell

arch/arm64/include/asm/cpu_ops.h:24: necesary ==> necessary
arch/arm64/include/asm/kvm_arm.h:69: maintainance ==> maintenance
arch/arm64/include/asm/cpufeature.h:361: capabilties ==> capabilities
arch/arm64/kernel/perf_regs.c:19: compatability ==> compatibility
arch/arm64/kernel/smp_spin_table.c:86: endianess ==> endianness
arch/arm64/kernel/smp_spin_table.c:88: endianess ==> endianness
arch/arm64/kvm/vgic/vgic-mmio-v3.c:1004: targetting ==> targeting
arch/arm64/kvm/vgic/vgic-mmio-v3.c:1005: targetting ==> targeting

Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Link: https://lore.kernel.org/r/20200828031822.35928-1-nixiaoming@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>

show more ...

arm64: Introduce get_cpu_ops() helper function

This introduces get_cpu_ops() to return the CPU operations according to
the given CPU index. For now, it simply returns the @cpu_ops[cpu] a

arm64: Introduce get_cpu_ops() helper function

This introduces get_cpu_ops() to return the CPU operations according to
the given CPU index. For now, it simply returns the @cpu_ops[cpu] as
before. Also, helper function __cpu_try_die() is introduced to be shared
by cpu_die() and ipi_cpu_crash_stop(). So it shouldn't introduce any
functional changes.

Signed-off-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>

show more ...

arm64: Rename cpu_read_ops() to init_cpu_ops()

This renames cpu_read_ops() to init_cpu_ops() as the function is only
called in initialization phase. Also, we will introduce get_cpu_ops()

arm64: Rename cpu_read_ops() to init_cpu_ops()

This renames cpu_read_ops() to init_cpu_ops() as the function is only
called in initialization phase. Also, we will introduce get_cpu_ops() in
the subsequent patches, to retireve the CPU operation by the given CPU
index. The usage of cpu_read_ops() and get_cpu_ops() are difficult to be
distinguished from their names.

Signed-off-by: Gavin Shan <gshan@redhat.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

show more ...

arm64: smp: disable hotplug on trusted OS resident CPU

The trusted OS may reject CPU_OFF calls to its resident CPU, so we must
avoid issuing those. We never migrate a Trusted OS and we a

arm64: smp: disable hotplug on trusted OS resident CPU

The trusted OS may reject CPU_OFF calls to its resident CPU, so we must
avoid issuing those. We never migrate a Trusted OS and we already take
care to prevent CPU_OFF PSCI call. However, this is not reflected
explicitly to the userspace. Any user can attempt to hotplug trusted OS
resident CPU. The entire motion of going through the various state
transitions in the CPU hotplug state machine gets executed and the
PSCI layer finally refuses to make CPU_OFF call.

This results is unnecessary unwinding of CPU hotplug state machine in
the kernel. Instead we can mark the trusted OS resident CPU as not
available for hotplug, so that the user attempt or request to do the
same will get immediately rejected.

Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>

show more ...

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 234

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it u

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 234

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with this program if not see http www gnu org
licenses

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-only

has been chosen to replace the boilerplate/reference in 503 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Enrico Weigelt <info@metux.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190602204653.811534538@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

ARM64: kernel: unify ACPI and DT cpus initialization

The code that initializes cpus on arm64 is currently split in two
different code paths that carry out DT and ACPI cpus initialization

ARM64: kernel: unify ACPI and DT cpus initialization

The code that initializes cpus on arm64 is currently split in two
different code paths that carry out DT and ACPI cpus initialization.

Most of the code executing SMP initialization is common and should
be merged to reduce discrepancies between ACPI and DT initialization
and to have code initializing cpus in a single common place in the
kernel.

This patch refactors arm64 SMP cpus initialization code to merge
ACPI and DT boot paths in a common file and to create sanity
checks that can be reused by both boot methods.

Current code assumes PSCI is the only available boot method
when arm64 boots with ACPI; this can be easily extended if/when
the ACPI parking protocol is merged into the kernel.

Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Hanjun Guo <hanjun.guo@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Hanjun Guo <hanjun.guo@linaro.org>
Tested-by: Mark Rutland <mark.rutland@arm.com> [DT]
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

show more ...

ARM64: kernel: make cpu_ops hooks DT agnostic

ARM64 CPU operations such as cpu_init and cpu_init_idle take
a struct device_node pointer as a parameter, which corresponds to
the devic

ARM64: kernel: make cpu_ops hooks DT agnostic

ARM64 CPU operations such as cpu_init and cpu_init_idle take
a struct device_node pointer as a parameter, which corresponds to
the device tree node of the logical cpu on which the operation
has to be applied.

With the advent of ACPI on arm64, where MADT static table entries
are used to initialize cpus, the device tree node parameter
in cpu_ops hooks become useless when booting with ACPI, since
in that case cpu device tree nodes are not present and can not be
used for cpu initialization.

The current cpu_init hook requires a struct device_node pointer
parameter because it is called while parsing the device tree to
initialize CPUs, when the cpu_logical_map (that is used to match
a cpu node reg property to a device tree node) for a given logical
cpu id is not set up yet. This means that the cpu_init hook cannot
rely on the of_get_cpu_node function to retrieve the device tree
node corresponding to the logical cpu id passed in as parameter,
so the cpu device tree node must be passed in as a parameter to fix
this catch-22 dependency cycle.

This patch reshuffles the cpu_logical_map initialization code so
that the cpu_init cpu_ops hook can safely use the of_get_cpu_node
function to retrieve the cpu device tree node, removing the need for
the device tree node pointer parameter.

In the process, the patch removes device tree node parameters
from all cpu_ops hooks, in preparation for SMP DT/ACPI cpus
initialization consolidation.

Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Hanjun Guo <hanjun.guo@linaro.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Hanjun Guo <hanjun.guo@linaro.org>
Tested-by: Mark Rutland <mark.rutland@arm.com> [DT]
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

show more ...