|
Revision tags: v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45, v6.1.44, v6.1.43, v6.1.42, v6.1.41, v6.1.40, v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35, v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22, v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16 |
|
| #
40430a7c |
| 29-Dec-2022 |
Konrad Dybcio <konrad.dybcio@linaro.org> |
arm64: dts: qcom: sm8450-nagara: Set up camera regulators
Set up gpio-controlled fixed regulators for camera on PDX223 and fix
up the existing ones in common and PDX224 trees.
Signed-off-by: Konrad
arm64: dts: qcom: sm8450-nagara: Set up camera regulators
Set up gpio-controlled fixed regulators for camera on PDX223 and fix
up the existing ones in common and PDX224 trees.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221229103212.984324-5-konrad.dybcio@linaro.org
show more ...
|
| #
4c5ab70d |
| 29-Dec-2022 |
Konrad Dybcio <konrad.dybcio@linaro.org> |
arm64: dts: qcom: sm8450-nagara: Add GPIO line names for PMIC GPIOs
Sony ever so graciously provides GPIO line names in their downstream
kernel (though sometimes they are not 100% accurate and you c
arm64: dts: qcom: sm8450-nagara: Add GPIO line names for PMIC GPIOs
Sony ever so graciously provides GPIO line names in their downstream
kernel (though sometimes they are not 100% accurate and you can judge
that by simply looking at them and with what drivers they are used).
Add these to the PDX223&224 DTSIs to better document the hardware.
Diff between 223 and 224:
pm8350b
< "CAM_PWR_LD_EN",
> "NC",
pm8350c
< "RGBC_IR_PWR_EN",
> "NC",
Which is due to different camera power wiring on 223 and lack of a
ToF sensor on 224.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221229103212.984324-3-konrad.dybcio@linaro.org
show more ...
|
|
Revision tags: v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80 |
|
| #
15245c93 |
| 17-Nov-2022 |
Konrad Dybcio <konrad.dybcio@linaro.org> |
arm64: dts: qcom: sm8450-nagara: Add gpio line names for TLMM
Sony ever so graciously provides GPIO line names in their downstream
kernel (though sometimes they are not 100% accurate and you can jud
arm64: dts: qcom: sm8450-nagara: Add gpio line names for TLMM
Sony ever so graciously provides GPIO line names in their downstream
kernel (though sometimes they are not 100% accurate and you can judge
that by simply looking at them and with what drivers they are used).
Add these to the PDX223&224 DTSIs to better document the hardware.
Diff between 223 and 224:
< gpio-line-names = "NC", /* GPIO_0 */
< "NC",
< "NC",
< "NC",
> gpio-line-names = "TELE_SPI_MISO", /* GPIO_0 */
> "TELE_SPI_MOSI",
> "TELE_SPI_CLK",
> "TELE_SPI_CS_N",
< "PM8010_2_RESET_N",
> "NC",
< "NC",
> "UWIDEC_PWR_EN",
< "TOF_RST_N",
> "NC"
< "QLINK1_REQ",
< "QLINK1_EN", /* GPIO_160 */
< "QLINK1_WMSS_RESET_N",
> "NC",
> "NC", /* GPIO_160 */
> "NC",
The tele lens setup is different on 1 IV and 5 IV and power wiring
is different for some lenses, so it makes sense. As for QLINK, no
idea.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221117141613.19942-1-konrad.dybcio@linaro.org
show more ...
|
|
Revision tags: v6.0.9, v5.15.79 |
|
| #
1620676b |
| 14-Nov-2022 |
Konrad Dybcio <konrad.dybcio@linaro.org> |
arm64: dts: qcom: sm8450-nagara: Separate out Nagara platform dtsi
Turns out 1 IV is not the only Nagara device, reflect that in the DTS.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Sig
arm64: dts: qcom: sm8450-nagara: Separate out Nagara platform dtsi
Turns out 1 IV is not the only Nagara device, reflect that in the DTS.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221114095654.34561-2-konrad.dybcio@linaro.org
show more ...
|
|
Revision tags: v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6 |
|
| #
9d561dc4 |
| 26-Oct-2022 |
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> |
arm64: dts: qcom: sm8450: disable SDHCI SDR104/SDR50 on all boards
SDHCI on SM8450 HDK also has problems with SDR104/SDR50:
mmc0: card never left busy state
mmc0: error -110 whilst initialising
arm64: dts: qcom: sm8450: disable SDHCI SDR104/SDR50 on all boards
SDHCI on SM8450 HDK also has problems with SDR104/SDR50:
mmc0: card never left busy state
mmc0: error -110 whilst initialising SD card
so I think it is safe to assume this issue affects all SM8450 boards.
Move the quirk disallowing these modes to the SoC DTSI, to spare people
working on other boards the misery of debugging this issue.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221026200357.391635-3-krzysztof.kozlowski@linaro.org
show more ...
|
| #
a0646262 |
| 26-Oct-2022 |
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> |
arm64: dts: qcom: sm8450: move SDHCI pin configuration to DTSI
The SDHCI pin configuration/mux nodes are actually common to all
upstreamed boards, so define them in SoC DTSI to reduce code
duplicati
arm64: dts: qcom: sm8450: move SDHCI pin configuration to DTSI
The SDHCI pin configuration/mux nodes are actually common to all
upstreamed boards, so define them in SoC DTSI to reduce code
duplication.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221026200357.391635-2-krzysztof.kozlowski@linaro.org
show more ...
|
|
Revision tags: v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70, v5.15.69 |
|
| #
c53532f7 |
| 19-Sep-2022 |
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> |
arm64: dts: qcom: pdx223: correct firmware paths
Correct firmware paths for the Sony Xperia 1 IV to include the SoC name.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by
arm64: dts: qcom: pdx223: correct firmware paths
Correct firmware paths for the Sony Xperia 1 IV to include the SoC name.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220919190037.2122284-6-dmitry.baryshkov@linaro.org
show more ...
|
|
Revision tags: v5.15.68 |
|
| #
a7374752 |
| 12-Sep-2022 |
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> |
arm64: dts: qcom: sm8450: align TLMM pin configuration with DT schema
DT schema expects TLMM pin configuration nodes to be named with '-state'
suffix and their optional children with '-pins' suffix.
arm64: dts: qcom: sm8450: align TLMM pin configuration with DT schema
DT schema expects TLMM pin configuration nodes to be named with '-state'
suffix and their optional children with '-pins' suffix.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220912061746.6311-39-krzysztof.kozlowski@linaro.org
show more ...
|
|
Revision tags: v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62, v5.15.61, v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55 |
|
| #
0a631a36 |
| 14-Jul-2022 |
Konrad Dybcio <konrad.dybcio@somainline.org> |
arm64: dts: qcom: Add device tree for Sony Xperia 1 IV
Add support for Sony Xperia 1 IV, a.k.a PDX223. This device is a part
of the SoMC SM8450 Nagara platform and currently it is the only
device ba
arm64: dts: qcom: Add device tree for Sony Xperia 1 IV
Add support for Sony Xperia 1 IV, a.k.a PDX223. This device is a part
of the SoMC SM8450 Nagara platform and currently it is the only
device based on that board, so no -common DTSI is created until (if?)
other Nagara devices appear.
This commit brings support for:
* SD Card
* USB (*including SuperSpeed*)
* ADSP/CDSP/SLPI (modem remains untested for now)
* Most regulators (some GPIO-enabled ones require PMIC GPIOs but
trying to access any SPMI device crashes the device..)
* Part of I2C-connected peripherals (notably no touch due to a
driver bug)
* PCIe0 (PCIe1 is unused)
Do note display via simplefb is not supported, as the display is blanked
upon exiting XBL.
To create a working boot image, you need to run:
cat arch/arm64/boot/Image.gz arch/arm64/boot/dts/qcom/sm8450-sony-xperia-\
nagara-pdx223.dtb > .Image.gz-dtb
mkbootimg \
--kernel .Image.gz-dtb \
--ramdisk some_initrd.img \
--pagesize 4096 \
--base 0x0 \
--kernel_offset 0x8000 \
--ramdisk_offset 0x1000000 \
--tags_offset 0x100 \
--cmdline "SOME_CMDLINE" \
--dtb_offset 0x1f00000 \
--header_version 1 \
--os_version 12 \
--os_patch_level 2022-06 \ # or newer
-o boot.img-sony-xperia-pdx223
Then, you need to flash it on the device and get rid of all the
vendor_boot/dtbo mess:
// You have to either pull vbmeta{"","_system"} from
// /dev/block/bootdevice/by-name/ or build one as a part of AOSP build process
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot --disable-verity --disable-verification flash vbmeta_system \
vbmeta_system.img
fastboot flash boot boot.img-sony-xperia-pdx223
fastboot erase vendor_boot
fastboot erase recovery
fastboot flash dtbo emptydtbo.img
fastboot reboot
Where emptydtbo.img is a tiny file that consists of 2 bytes (all zeroes), doing
a "fastboot erase" won't cut it, the bootloader will go crazy and things will
fall apart when it tries to overlay random bytes from an empty partition onto a
perfectly good appended DTB.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220714123406.1919836-5-konrad.dybcio@somainline.org
show more ...
|