Revision tags: v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45, v6.1.44, v6.1.43 |
|
#
41c18552 |
| 30-Jul-2023 |
Marijn Suijten <marijn.suijten@somainline.org> |
arm64: dts: qcom: Use labels with generic node names for ADC channels
As discussed in [1] it is more convenient to use a generic `channel` node name for ADC channels while storing a friendly - board
arm64: dts: qcom: Use labels with generic node names for ADC channels
As discussed in [1] it is more convenient to use a generic `channel` node name for ADC channels while storing a friendly - board-specific instead of PMIC-specific - name in the label, if/when desired to overwrite the channel description already contained (but previously unused) in the driver [2]. Follow up on the dt-bindings' `channel` node name requirement, and instead provide this (sometimes per-board) channel description through a label property.
Also remove all the unused label references (not to be confused with label properties) from pm660, pmp8074 and pms405.
[1]: https://lore.kernel.org/linux-arm-msm/20221106193018.270106-1-marijn.suijten@somainline.org/T/#u [2]: https://lore.kernel.org/linux-arm-msm/20230116220909.196926-4-marijn.suijten@somainline.org/
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230730-generic-adc-channels-v5-2-e6c69bda8034@somainline.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
show more ...
|
Revision tags: v6.1.42, v6.1.41, v6.1.40, v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4 |
|
#
46b17dfd |
| 22-Jun-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
arm64: dts: qcom: sm8[1235]50-mtp: add chassis-type property
Qualcomm's Mobile Test Platforms devices are handsets, set the chassis-type property to 'handset'.
Signed-off-by: Neil Armstrong <neil.a
arm64: dts: qcom: sm8[1235]50-mtp: add chassis-type property
Qualcomm's Mobile Test Platforms devices are handsets, set the chassis-type property to 'handset'.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230622-topic-sm8x50-upstream-chassis-type-v1-1-13f676eb71f3@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
show more ...
|
Revision tags: v6.1.35, v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22 |
|
#
4ded9153 |
| 22-Mar-2023 |
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> |
arm64: dts: qcom: sm8250-mtp: Use proper WSA881x shutdown GPIO polarity
The WSA881x shutdown GPIO is active low (SD_N), but Linux driver assumed DTS always comes with active high. Since Linux drive
arm64: dts: qcom: sm8250-mtp: Use proper WSA881x shutdown GPIO polarity
The WSA881x shutdown GPIO is active low (SD_N), but Linux driver assumed DTS always comes with active high. Since Linux drivers were updated to handle proper flag, correct the DTS.
The change is not backwards compatible with older Linux kernel.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230322193051.826167-4-krzysztof.kozlowski@linaro.org
show more ...
|
Revision tags: v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9 |
|
#
537f572b |
| 27-Jan-2023 |
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> |
arm64: dts: qcom: sm8250: align RPMh regulator nodes with bindings
Device node names should be generic and bindings expect certain pattern for RPMh regulator nodes.
Signed-off-by: Krzysztof Kozlows
arm64: dts: qcom: sm8250: align RPMh regulator nodes with bindings
Device node names should be generic and bindings expect certain pattern for RPMh regulator nodes.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230127114347.235963-9-krzysztof.kozlowski@linaro.org
show more ...
|
#
ba23455e |
| 24-Jan-2023 |
Konrad Dybcio <konrad.dybcio@linaro.org> |
arm64: dts: qcom: sm8250: Disable wsamacro and swr0 by default
They are not used on all boards, so disable them by default. Enable them back on MTP/RB5, which were the only current users.
Signed-of
arm64: dts: qcom: sm8250: Disable wsamacro and swr0 by default
They are not used on all boards, so disable them by default. Enable them back on MTP/RB5, which were the only current users.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230124164616.228619-1-konrad.dybcio@linaro.org
show more ...
|
Revision tags: v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17 |
|
#
74d6ed03 |
| 03-Jan-2023 |
Johan Hovold <johan+linaro@kernel.org> |
arm64: dts: qcom: sm8250: clean up wcd938x codec node
Clean up the wcd938x codec node somewhat by adding newline separators, reordering properties and renaming it 'audio-codec'.
Signed-off-by: Joha
arm64: dts: qcom: sm8250: clean up wcd938x codec node
Clean up the wcd938x codec node somewhat by adding newline separators, reordering properties and renaming it 'audio-codec'.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230103103141.15807-7-johan+linaro@kernel.org
show more ...
|
Revision tags: v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1 |
|
#
e5b8c082 |
| 10-Dec-2022 |
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> |
arm64: dts: qcom: sm8250: move sound and codec nodes out of soc
The sound and codec nodes are not a property of a soc, but rather board as it describes the sound configuration. It also does not hav
arm64: dts: qcom: sm8250: move sound and codec nodes out of soc
The sound and codec nodes are not a property of a soc, but rather board as it describes the sound configuration. It also does not have unit address:
sm8250-hdk.dtb: soc@0: sound: {} should not be valid under {'type': 'object'}
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221210115704.97614-4-krzysztof.kozlowski@linaro.org
show more ...
|
Revision tags: v6.0.12, v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78 |
|
#
bd35f4b0 |
| 08-Nov-2022 |
Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com> |
arm64: dts: qcom: Update soundwire secondary node names
Update soundwire secondary nodes of WSA speaker to match with dt-bindings pattern properties regular expression.
This modification is require
arm64: dts: qcom: Update soundwire secondary node names
Update soundwire secondary nodes of WSA speaker to match with dt-bindings pattern properties regular expression.
This modification is required to avoid dtbs-check errors occurred with qcom,soundwire.yaml.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com> Co-developed-by: Ratna Deepthi Kudaravalli <quic_rkudarav@quicinc.com> Signed-off-by: Ratna Deepthi Kudaravalli <quic_rkudarav@quicinc.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/1667918763-32445-2-git-send-email-quic_srivasam@quicinc.com
show more ...
|
Revision tags: v6.0.7, v5.15.77, v5.15.76, v6.0.6 |
|
#
15d9fcbb |
| 27-Oct-2022 |
Dmitry Torokhov <dmitry.torokhov@gmail.com> |
arm64: dts: qcom: sm8250-mtp: fix reset line polarity
The driver for the codec, when resetting the chip, first drives the line low, and then high. This means that the line is active low. Change the
arm64: dts: qcom: sm8250-mtp: fix reset line polarity
The driver for the codec, when resetting the chip, first drives the line low, and then high. This means that the line is active low. Change the annotation in the DTS accordingly.
Fixes: 36c9d012f193 ("arm64: dts: qcom: use GPIO flags for tlmm") Fixes: 5a263cf629a8 ("arm64: dts: qcom: sm8250-mtp: Add wcd9380 audio codec node") Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221027074652.1044235-3-dmitry.torokhov@gmail.com
show more ...
|
Revision tags: v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0 |
|
#
f7636174 |
| 30-Sep-2022 |
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> |
arm64: dts: qcom: sm8250: align TLMM pin configuration with DT schema
DT schema expects TLMM pin configuration nodes to be named with '-state' suffix and their optional children with '-pins' suffix.
arm64: dts: qcom: sm8250: align TLMM pin configuration with DT schema
DT schema expects TLMM pin configuration nodes to be named with '-state' suffix and their optional children with '-pins' suffix.
Drop also unneeded split between mux and config.
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220930192954.242546-2-krzysztof.kozlowski@linaro.org
show more ...
|
Revision tags: v5.15.71, v5.15.70, v5.15.69, v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62, v5.15.61, v5.15.60, v5.15.59 |
|
#
36c9d012 |
| 02-Aug-2022 |
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> |
arm64: dts: qcom: use GPIO flags for tlmm
Use respective GPIO_ACTIVE_LOW/HIGH flags for tlmm GPIOs. Include gpio.h header if this is first usage of that flag.
Signed-off-by: Krzysztof Kozlowski <k
arm64: dts: qcom: use GPIO flags for tlmm
Use respective GPIO_ACTIVE_LOW/HIGH flags for tlmm GPIOs. Include gpio.h header if this is first usage of that flag.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220802153947.44457-4-krzysztof.kozlowski@linaro.org
show more ...
|
Revision tags: v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55, v5.15.54, v5.15.53, v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48, v5.15.47, v5.15.46, v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34, v5.15.33 |
|
#
18019eb6 |
| 01-Apr-2022 |
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> |
arm64: dts: qcom: sm8250: don't enable rx/tx macro by default
Enabling rxmacro and txmacro nodes by defaults makes Qualcomm RB5 to crash and reboot while probing audio devices. Disable these device
arm64: dts: qcom: sm8250: don't enable rx/tx macro by default
Enabling rxmacro and txmacro nodes by defaults makes Qualcomm RB5 to crash and reboot while probing audio devices. Disable these device tree nodes by default and enabled them only when necessary (for the SM8250-MTP board).
Fixes: 24f52ef0c4bf ("arm64: dts: qcom: sm8250: Add nodes for tx and rx macros with soundwire masters") Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220401185814.519653-1-dmitry.baryshkov@linaro.org
show more ...
|
Revision tags: v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.16, v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10 |
|
#
fa244dca |
| 06-Oct-2021 |
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> |
arm64: dts: qcom: sm8250-mtp: add sound card support
This patch adds sound card support for MTP using WCD938x headset playback, capture, WSA8810 Speaker Playback and DMICs via VA macro.
Signed-off-
arm64: dts: qcom: sm8250-mtp: add sound card support
This patch adds sound card support for MTP using WCD938x headset playback, capture, WSA8810 Speaker Playback and DMICs via VA macro.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211006164712.16078-5-srinivas.kandagatla@linaro.org
show more ...
|
#
6fcda0b5 |
| 06-Oct-2021 |
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> |
arm64: dts: qcom: sm8250-mtp: Add wsa8810 audio codec node
SM8250-MTP has WSA8810 via wsa macro for Speaker playback use case. Add node for this device to be able to use it for sound card device.
S
arm64: dts: qcom: sm8250-mtp: Add wsa8810 audio codec node
SM8250-MTP has WSA8810 via wsa macro for Speaker playback use case. Add node for this device to be able to use it for sound card device.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211006164712.16078-4-srinivas.kandagatla@linaro.org
show more ...
|
#
5a263cf6 |
| 06-Oct-2021 |
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> |
arm64: dts: qcom: sm8250-mtp: Add wcd9380 audio codec node
SM8250-MTP has WCD9380 codec for headset playback and capture via rx and tx macro respectively. Add node for this device to be able to use
arm64: dts: qcom: sm8250-mtp: Add wcd9380 audio codec node
SM8250-MTP has WCD9380 codec for headset playback and capture via rx and tx macro respectively. Add node for this device to be able to use it for sound card device.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211006164712.16078-3-srinivas.kandagatla@linaro.org
show more ...
|
Revision tags: v5.14.9 |
|
#
03ceec4e |
| 28-Sep-2021 |
Shawn Guo <shawn.guo@linaro.org> |
arm64: dts: qcom: Drop max-microamp and vddp-ref-clk properties from QMP PHY
The following properties are not supported and causing dtbs_check warnings.
- vdda-phy-max-microamp - vdda-pll-max-micro
arm64: dts: qcom: Drop max-microamp and vddp-ref-clk properties from QMP PHY
The following properties are not supported and causing dtbs_check warnings.
- vdda-phy-max-microamp - vdda-pll-max-microamp - vddp-ref-clk-max-microamp - vddp-ref-clk-always-on
Drop them from QMP PHY nodes.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210929034253.24570-6-shawn.guo@linaro.org
show more ...
|
Revision tags: v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46 |
|
#
ece28cb5 |
| 12-Jun-2021 |
Konrad Dybcio <konrad.dybcio@somainline.org> |
arm64: dts: qcom: sm8250: Disable Adreno and Venus by default
Components that rely on proprietary (not to mention signed!) firmware should not be enabled by default, as lack of the aforementioned fi
arm64: dts: qcom: sm8250: Disable Adreno and Venus by default
Components that rely on proprietary (not to mention signed!) firmware should not be enabled by default, as lack of the aforementioned firmware could cause various issues, from random errors to straight-up failing to boot.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210612192358.62602-1-konrad.dybcio@somainline.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
show more ...
|
Revision tags: v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14 |
|
#
40a5aa1f |
| 05-Jan-2021 |
Bjorn Andersson <bjorn.andersson@linaro.org> |
arm64: dts: qcom: pm8150: Enable RTC
The PM8150 comes with everything the RTC needs, so let's just leave it enabled instead of having to explicitly enable it for all boards. In effect this patch ena
arm64: dts: qcom: pm8150: Enable RTC
The PM8150 comes with everything the RTC needs, so let's just leave it enabled instead of having to explicitly enable it for all boards. In effect this patch enables the RTC on the SM8150 MTP and the SM8250 HDK.
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210106001004.4081508-1-bjorn.andersson@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
show more ...
|
#
681db16a |
| 18-Jan-2021 |
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> |
arm64: dts: sm8250-mtp: add thermal zones using pmic's adc-tm5
Port thermal zones definitions from msm-4.19 tree. Enable and add channel configuration to PMIC's ADC-TM definitions. Declare thermal z
arm64: dts: sm8250-mtp: add thermal zones using pmic's adc-tm5
Port thermal zones definitions from msm-4.19 tree. Enable and add channel configuration to PMIC's ADC-TM definitions. Declare thermal zones and respective trip points.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20210119054848.592329-5-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
show more ...
|
Revision tags: v5.10 |
|
#
9e301a54 |
| 03-Dec-2020 |
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> |
arm64: dts: qcom: sm8250-mtp: add gpu/zap-shader node
Add firmware configuration for Adreno zap shader on sm8250-mtp.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lor
arm64: dts: qcom: sm8250-mtp: add gpu/zap-shader node
Add firmware configuration for Adreno zap shader on sm8250-mtp.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20201203142105.841666-5-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
show more ...
|
#
221f0ef3 |
| 27-Nov-2020 |
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> |
arm64: dts: sm8250-mtp: enable USB host nodes
Enable both USB host controller, hsphy and qmpphy nodes on sm8250. Add missing pm8150 ldo18 definition (used by USB qmp phys). Both controllers are lock
arm64: dts: sm8250-mtp: enable USB host nodes
Enable both USB host controller, hsphy and qmpphy nodes on sm8250. Add missing pm8150 ldo18 definition (used by USB qmp phys). Both controllers are locked to host mode: dual role on first controller is not enabled.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20201127092646.122663-1-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
show more ...
|
Revision tags: v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13 |
|
#
d371a931 |
| 30-Sep-2020 |
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> |
arm64: dts: qcom: sm8250: correct compatible for sm8250-mtp
Qualcomm boards should define two compatible strings: one for board, anoter one for SoC family. sm8250-mtp.dts lists just the board compat
arm64: dts: qcom: sm8250: correct compatible for sm8250-mtp
Qualcomm boards should define two compatible strings: one for board, anoter one for SoC family. sm8250-mtp.dts lists just the board compatible, which makes it incompatible with qcom.yaml schema.
Reviewed-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Fixes: 60378f1a171e ("arm64: dts: qcom: sm8250: Add sm8250 dts file") Link: https://lore.kernel.org/r/20200930112133.2091505-1-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
show more ...
|
#
db5f5da2 |
| 02-Nov-2020 |
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> |
arm64: dts: qcom: enable rtc on sm8250-mtp board
Enable PMIC's RTC device on SM8250-MTP board.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20201103
arm64: dts: qcom: enable rtc on sm8250-mtp board
Enable PMIC's RTC device on SM8250-MTP board.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20201103005432.1181832-2-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
show more ...
|
#
281c972a |
| 30-Sep-2020 |
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> |
arm64: dts: qcom: sm8250: correct compatible for sm8250-mtp
[ Upstream commit d371a931540bc36fd1199de3ec365a1187b7b282 ]
Qualcomm boards should define two compatible strings: one for board, anoter
arm64: dts: qcom: sm8250: correct compatible for sm8250-mtp
[ Upstream commit d371a931540bc36fd1199de3ec365a1187b7b282 ]
Qualcomm boards should define two compatible strings: one for board, anoter one for SoC family. sm8250-mtp.dts lists just the board compatible, which makes it incompatible with qcom.yaml schema.
Reviewed-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Fixes: 60378f1a171e ("arm64: dts: qcom: sm8250: Add sm8250 dts file") Link: https://lore.kernel.org/r/20200930112133.2091505-1-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
show more ...
|
Revision tags: v5.8.12, v5.8.11, v5.8.10 |
|
#
c0011172 |
| 13-Sep-2020 |
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> |
arm64: dts: qcom: sm8250-mtp: add i2c device tree nodes
Add device tree nodes describing used i2c busses according to the dts found in msm-4.19 tree.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshk
arm64: dts: qcom: sm8250-mtp: add i2c device tree nodes
Add device tree nodes describing used i2c busses according to the dts found in msm-4.19 tree.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20200913224738.30046-1-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
show more ...
|