Revision tags: v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49 |
|
#
2bc71fcc |
| 26-Aug-2023 |
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> |
arm64: dts: qcom: sdm845-mtp: fix WiFi configuration
[ Upstream commit b33868a52f342d9b1f20aa5bffe40cbd69bd0a4b ]
Enable the host-cap-8bit quirk on this device. It is required for the WiFi to funct
arm64: dts: qcom: sdm845-mtp: fix WiFi configuration
[ Upstream commit b33868a52f342d9b1f20aa5bffe40cbd69bd0a4b ]
Enable the host-cap-8bit quirk on this device. It is required for the WiFi to function properly.
Fixes: 022bccb840b7 ("arm64: dts: sdm845: Add WCN3990 WLAN module device node") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230826221915.846937-2-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
show more ...
|
Revision tags: v6.1.48, v6.1.46, v6.1.45, v6.1.44, v6.1.43 |
|
#
41c18552 |
| 30-Jul-2023 |
Marijn Suijten <marijn.suijten@somainline.org> |
arm64: dts: qcom: Use labels with generic node names for ADC channels
As discussed in [1] it is more convenient to use a generic `channel` node name for ADC channels while storing a friendly - board
arm64: dts: qcom: Use labels with generic node names for ADC channels
As discussed in [1] it is more convenient to use a generic `channel` node name for ADC channels while storing a friendly - board-specific instead of PMIC-specific - name in the label, if/when desired to overwrite the channel description already contained (but previously unused) in the driver [2]. Follow up on the dt-bindings' `channel` node name requirement, and instead provide this (sometimes per-board) channel description through a label property.
Also remove all the unused label references (not to be confused with label properties) from pm660, pmp8074 and pms405.
[1]: https://lore.kernel.org/linux-arm-msm/20221106193018.270106-1-marijn.suijten@somainline.org/T/#u [2]: https://lore.kernel.org/linux-arm-msm/20230116220909.196926-4-marijn.suijten@somainline.org/
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230730-generic-adc-channels-v5-2-e6c69bda8034@somainline.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
show more ...
|
Revision tags: v6.1.42, v6.1.41, v6.1.40, v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4 |
|
#
2b08da0d |
| 22-Jun-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
arm64: dts: qcom: sdm845-mtp: add chassis-type property
Qualcomm's Mobile Test Platforms devices are handsets, set the chassis-type property to 'handset'.
Signed-off-by: Neil Armstrong <neil.armstr
arm64: dts: qcom: sdm845-mtp: add chassis-type property
Qualcomm's Mobile Test Platforms devices are handsets, set the chassis-type property to 'handset'.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230622-topic-sm8x50-upstream-chassis-type-v1-5-13f676eb71f3@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
show more ...
|
Revision tags: v6.1.35, v6.1.34, v6.1.33, v6.1.32 |
|
#
8fe25ba3 |
| 30-May-2023 |
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> |
arm64: dts: qcom: sdm845: rename labels for DSI nodes
Currently in board files MDSS and DSI nodes stay apart, because labels for DSI nodes do not have the mdss_ prefix. It was found that grouping al
arm64: dts: qcom: sdm845: rename labels for DSI nodes
Currently in board files MDSS and DSI nodes stay apart, because labels for DSI nodes do not have the mdss_ prefix. It was found that grouping all display-related notes is more useful.
To keep all display-related nodes close in the board files, change DSI node labels from dsi_* to mdss_dsi_*.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230531011623.3808538-12-dmitry.baryshkov@linaro.org
show more ...
|
Revision tags: v6.1.31, v6.1.30, v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22, v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9 |
|
#
86dd19bb |
| 27-Jan-2023 |
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> |
arm64: dts: qcom: sdm845: align RPMh regulator nodes with bindings
Device node names should be generic and bindings expect certain pattern for RPMh regulator nodes.
Signed-off-by: Krzysztof Kozlows
arm64: dts: qcom: sdm845: align RPMh regulator nodes with bindings
Device node names should be generic and bindings expect certain pattern for RPMh regulator nodes.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230127114347.235963-6-krzysztof.kozlowski@linaro.org
show more ...
|
Revision tags: v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16 |
|
#
a9a9e857 |
| 30-Dec-2022 |
Alex Elder <elder@linaro.org> |
arm64: dts: qcom: use qcom,gsi-loader for IPA
Depending on the platform, either the modem or the AP must load GSI firmware for IPA before it can be used. To date, this has been indicated by the pre
arm64: dts: qcom: use qcom,gsi-loader for IPA
Depending on the platform, either the modem or the AP must load GSI firmware for IPA before it can be used. To date, this has been indicated by the presence or absence of a "modem-init" property.
That mechanism has been deprecated. Instead, we indicate how GSI firmware should be loaded by the value of the "qcom,gsi-loader" property.
Update all arm64 platforms that use IPA to use the "qcom,gsi-loader" property to specify how the GSI firmware is loaded.
Update the affected nodes so the status property is last.
Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> [bjorn: Moved sc7280 change herobrine-lte-sku] Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221231002716.2367375-3-elder@linaro.org
show more ...
|
#
d05e3428 |
| 22-Dec-2022 |
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> |
arm64: dts: qcom: sdm845: align TLMM pin configuration with DT schema
DT schema expects TLMM pin configuration nodes to be named with '-state' suffix and their optional children with '-pins' suffix.
arm64: dts: qcom: sdm845: align TLMM pin configuration with DT schema
DT schema expects TLMM pin configuration nodes to be named with '-state' suffix and their optional children with '-pins' suffix.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221222151319.122398-3-krzysztof.kozlowski@linaro.org
show more ...
|
Revision tags: v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70, v5.15.69, v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64 |
|
#
209a0488 |
| 28-Aug-2022 |
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> |
arm64: dts: qcom: sdm845-mtp: correct ADC settle time
The PMIC's VADC property for settle time is qcom,hw-settle-time, not qcom,hw-settle-time-us. The latter is used in PMIC's TM ADC.
qcom/sdm84
arm64: dts: qcom: sdm845-mtp: correct ADC settle time
The PMIC's VADC property for settle time is qcom,hw-settle-time, not qcom,hw-settle-time-us. The latter is used in PMIC's TM ADC.
qcom/sdm845-mtp.dtb: pmic@0: adc@3100:adc-chan@4c: 'qcom,hw-settle-time-us' does not match any of the regexes: 'pinctrl-[0-9]+'
Fixes: d5e12f3823ae ("arm64: dts: qcom: sdm845: mtp: Add vadc channels and thermal zones") Cc: <stable@vger.kernel.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: David Heidelberg <david@ixit.cz> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220828084341.112146-13-krzysztof.kozlowski@linaro.org
show more ...
|
Revision tags: v5.15.63, v5.15.62, v5.15.61, v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55, v5.15.54, v5.15.53, v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48, v5.15.47, v5.15.46, v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.16, v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10 |
|
#
d5e12f38 |
| 04-Oct-2021 |
Bjorn Andersson <bjorn.andersson@linaro.org> |
arm64: dts: qcom: sdm845: mtp: Add vadc channels and thermal zones
Downstream defines four ADC channels related to thermal sensors external to the PM8998 and two channels for internal voltage measur
arm64: dts: qcom: sdm845: mtp: Add vadc channels and thermal zones
Downstream defines four ADC channels related to thermal sensors external to the PM8998 and two channels for internal voltage measurements.
Add these to the upstream SDM845 MTP, describe the thermal monitor channels and add thermal_zones for these.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20211005032531.2251928-5-bjorn.andersson@linaro.org
show more ...
|
#
dea1a788 |
| 01-Oct-2021 |
Konrad Dybcio <konrad.dybcio@somainline.org> |
arm64: dts: qcom: sdm845: Move gpio.h inclusion to SoC DTSI
Almost any board that boots and has a way to interact with it (say for the rare cases of just-pstore or let's-rely-on-bootloader-setup) ne
arm64: dts: qcom: sdm845: Move gpio.h inclusion to SoC DTSI
Almost any board that boots and has a way to interact with it (say for the rare cases of just-pstore or let's-rely-on-bootloader-setup) needs to set some GPIOs, so it makes no sense to include gpio.h separately each time. Hence move it to SoC DTSI.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211002001358.45920-6-konrad.dybcio@somainline.org
show more ...
|
#
26b59eb5 |
| 01-Oct-2021 |
Konrad Dybcio <konrad.dybcio@somainline.org> |
arm64: dts: qcom: sdm845: Add size/address-cells to dsi[01]
Add the aforementioned properties in the SoC DTSI so that everybody doesn't have to copy that into their device DTs, effectively reducing
arm64: dts: qcom: sdm845: Add size/address-cells to dsi[01]
Add the aforementioned properties in the SoC DTSI so that everybody doesn't have to copy that into their device DTs, effectively reducing code duplication.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211002001358.45920-5-konrad.dybcio@somainline.org
show more ...
|
#
4a5622c1 |
| 01-Oct-2021 |
Konrad Dybcio <konrad.dybcio@somainline.org> |
arm64: dts: qcom: sdm845: Don't disable MDP explicitly
DPU/MDSS is borderline useless without MDP, so disabling both of them makes little sense. With this change, enabling mdss will be enough.
Revi
arm64: dts: qcom: sdm845: Don't disable MDP explicitly
DPU/MDSS is borderline useless without MDP, so disabling both of them makes little sense. With this change, enabling mdss will be enough.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211002001358.45920-4-konrad.dybcio@somainline.org
show more ...
|
#
7f761609 |
| 01-Oct-2021 |
Konrad Dybcio <konrad.dybcio@somainline.org> |
arm64: dts: qcom: sdm845: Disable Adreno, modem and Venus by default
Components that rely on proprietary (not to mention signed!) firmware should not be enabled by default, as lack of the aforementi
arm64: dts: qcom: sdm845: Disable Adreno, modem and Venus by default
Components that rely on proprietary (not to mention signed!) firmware should not be enabled by default, as lack of the aforementioned firmware could cause various issues, from random errors to straight-up failing to boot.
Re-enable these remote processors on boards that didn't previously explicitly disable them.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Tested-By: Steev Klimaszewski <steev@kali.org> [bjorn: Added missing changes to db845c and lenovo-yoga-c630 to the patch] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211002001358.45920-3-konrad.dybcio@somainline.org
show more ...
|
Revision tags: v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49 |
|
#
77246d45 |
| 09-Jul-2021 |
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> |
arm64: dts: qcom: sdm845-mtp: assign DSI clock source parents
Assign DSI clock source parents to DSI PHY clocks.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav K
arm64: dts: qcom: sdm845-mtp: assign DSI clock source parents
Assign DSI clock source parents to DSI PHY clocks.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Link: https://lore.kernel.org/r/20210709210729.953114-5-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
show more ...
|
Revision tags: v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42 |
|
#
636245a6 |
| 19-May-2020 |
Alex Elder <elder@linaro.org> |
arm64: dts: qcom: sdm845-mtp: enable IPA
Enable IPA on the SDM845 MTP.
Signed-off-by: Alex Elder <elder@linaro.org> Link: https://lore.kernel.org/r/20200519123258.29228-1-elder@linaro.org Signed-of
arm64: dts: qcom: sdm845-mtp: enable IPA
Enable IPA on the SDM845 MTP.
Signed-off-by: Alex Elder <elder@linaro.org> Link: https://lore.kernel.org/r/20200519123258.29228-1-elder@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
show more ...
|
Revision tags: v5.4.41, v5.4.40, v5.4.39 |
|
#
54e9d5f7 |
| 04-May-2020 |
Sibi Sankar <sibis@codeaurora.org> |
arm64: dts: qcom: sdm845: Add SoC compatible to MTP
Add missing SoC compatible to SDM845 MTP board file.
Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Amit Kucheria <amit.kucheria@
arm64: dts: qcom: sdm845: Add SoC compatible to MTP
Add missing SoC compatible to SDM845 MTP board file.
Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Link: https://lore.kernel.org/r/20200504202243.5476-2-sibis@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
show more ...
|
Revision tags: v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24 |
|
#
dfaf1601 |
| 01-Mar-2020 |
Bjorn Andersson <bjorn.andersson@linaro.org> |
arm64: dts: qcom: sdm845-mtp: Relocate remoteproc firmware
Update the firmware-name of the remoteproc nodes to mimic the firmware structure on other 845 devices.
Reviewed-by: Sibi Sankar <sibis@cod
arm64: dts: qcom: sdm845-mtp: Relocate remoteproc firmware
Update the firmware-name of the remoteproc nodes to mimic the firmware structure on other 845 devices.
Reviewed-by: Sibi Sankar <sibis@codeaurora.org> Link: https://lore.kernel.org/r/20200302020757.551483-1-bjorn.andersson@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
show more ...
|
Revision tags: v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4, v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7, v5.2.6, v5.2.5, v5.2.4, v5.2.3, v5.2.2, v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8, v5.1.7, v5.1.6, v5.1.5, v5.1.4, v5.1.3, v5.1.2 |
|
#
0407fad0 |
| 13-May-2019 |
Bjorn Andersson <bjorn.andersson@linaro.org> |
arm64: dts: qcom: sdm845-mtp: Add Truly display
Bring in the Truly display and enable the DSI channels to make the mdss/gpu probe, even though we're lacking LABIB, preventing us from seeing anything
arm64: dts: qcom: sdm845-mtp: Add Truly display
Bring in the Truly display and enable the DSI channels to make the mdss/gpu probe, even though we're lacking LABIB, preventing us from seeing anything on the screen.
Tested-by: Vivek Gautam <vivek.gautam@codeaurora.org> Reviewed-by: Vivek Gautam <vivek.gautam@codeaurora.org> Link: https://lore.kernel.org/r/20190513210747.22429-1-bjorn.andersson@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
show more ...
|
#
f489b13d |
| 12-Jan-2020 |
Rob Clark <robdclark@chromium.org> |
arm64: dts: qcom: sdm845: move gpu zap nodes to per-device dts
We want to specify per-device firmware-name, so move the zap node into the .dts file for individual boards/devices. This lets us get r
arm64: dts: qcom: sdm845: move gpu zap nodes to per-device dts
We want to specify per-device firmware-name, so move the zap node into the .dts file for individual boards/devices. This lets us get rid of the /delete-node/ for cheza, which does not use zap.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org> Link: https://lore.kernel.org/r/20200112195405.1132288-5-robdclark@gmail.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
show more ...
|
#
3e303a42 |
| 28-Aug-2019 |
Bjorn Andersson <bjorn.andersson@linaro.org> |
scsi: arm64: dts: qcom: sdm845: Specify UFS device-reset GPIO
Specify the UFS device-reset gpio for db845c and mtp, so that the controller will issue a reset of the UFS device.
Link: https://lore.k
scsi: arm64: dts: qcom: sdm845: Specify UFS device-reset GPIO
Specify the UFS device-reset gpio for db845c and mtp, so that the controller will issue a reset of the UFS device.
Link: https://lore.kernel.org/r/20190828191756.24312-4-bjorn.andersson@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Avri Altman <Avri.Altman@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
show more ...
|
Revision tags: v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11, v5.0.10 |
|
#
9000a55b |
| 26-Apr-2019 |
Bjorn Andersson <bjorn.andersson@linaro.org> |
arm64: dts: qcom: sdm845-mtp: Make USB1 peripheral
The MTP is a "mobile reference device", as such the default operation is to use fastboot to boot/flash software onto it and the common case is ther
arm64: dts: qcom: sdm845-mtp: Make USB1 peripheral
The MTP is a "mobile reference device", as such the default operation is to use fastboot to boot/flash software onto it and the common case is thereby that we boot with a USB cable connected downstream from a PC or a hub. And without support for the PMI8998 charger block VBUS will not be driven by the device.
Switch to peripheral until we can enable OTG.
Reviewed-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <agross@kernel.org>
show more ...
|
Revision tags: v5.0.9, v5.0.8, v5.0.7, v5.0.6, v5.0.5, v5.0.4, v5.0.3, v4.19.29, v5.0.2, v4.19.28, v5.0.1, v4.19.27, v5.0, v4.19.26, v4.19.25, v4.19.24, v4.19.23, v4.19.22, v4.19.21, v4.19.20 |
|
#
6ef7c11b |
| 05-Feb-2019 |
Bjorn Andersson <bjorn.andersson@linaro.org> |
arm64: dts: sdm845: Introduce ADSP and CDSP PAS nodes
Add the Audio DSP (ADSP) and Compute DSP (CDSP) nodes for TrustZone based remoteproc, supporting booting these cores on e.g. the MTP, and enable
arm64: dts: sdm845: Introduce ADSP and CDSP PAS nodes
Add the Audio DSP (ADSP) and Compute DSP (CDSP) nodes for TrustZone based remoteproc, supporting booting these cores on e.g. the MTP, and enable the same for the MTP.
Tested-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Sibi Sankar <sibis@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <agross@kernel.org>
show more ...
|
Revision tags: v4.19.19, v4.19.18, v4.19.17, v4.19.16, v4.19.15, v4.19.14, v4.19.13, v4.19.12, v4.19.11, v4.19.10, v4.19.9, v4.19.8, v4.19.7, v4.19.6, v4.19.5, v4.19.4, v4.18.20, v4.19.3, v4.18.19, v4.19.2, v4.18.18 |
|
#
022bccb8 |
| 05-Nov-2018 |
Govind Singh <govinds@codeaurora.org> |
arm64: dts: sdm845: Add WCN3990 WLAN module device node
Add device node for the ath10k SNOC platform driver probe and add resources required for WCN3990 on SDM845 soc.
Reviewed-by: Brian Norris <br
arm64: dts: sdm845: Add WCN3990 WLAN module device node
Add device node for the ath10k SNOC platform driver probe and add resources required for WCN3990 on SDM845 soc.
Reviewed-by: Brian Norris <briannorris@chromium.org> Tested-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Govind Singh <govinds@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
show more ...
|
#
0cef5dd4 |
| 05-Dec-2018 |
Taniya Das <tdas@codeaurora.org> |
arm64: dts: sdm845: Add lpasscc node
This adds the low pass audio clock controller node to sdm845 based on the example in the bindings.
Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-
arm64: dts: sdm845: Add lpasscc node
This adds the low pass audio clock controller node to sdm845 based on the example in the bindings.
Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Taniya Das <tdas@codeaurora.org> [bjorn: Disabled lpasscc node, as it's normally protected] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
show more ...
|
#
b010fdb4 |
| 10-Dec-2018 |
Can Guo <cang@codeaurora.org> |
arm64: dts: qcom: sdm845: Add UFS nodes for sdm845-mtp
Enable the UFS host controller and PHY on sdm845-mtp.
Reviewed-by: Vivek Gautam <vivek.gautam@codeaurora.org> Reviewed-by: Douglas Anderson <d
arm64: dts: qcom: sdm845: Add UFS nodes for sdm845-mtp
Enable the UFS host controller and PHY on sdm845-mtp.
Reviewed-by: Vivek Gautam <vivek.gautam@codeaurora.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Can Guo <cang@codeaurora.org> Signed-off-by: Evan Green <evgreen@chromium.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
show more ...
|