|
Revision tags: v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45, v6.1.44, v6.1.43, v6.1.42, v6.1.41, v6.1.40, v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35, v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22, v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70, v5.15.69, v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62, v5.15.61, v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57 |
|
| #
a73dd03b |
| 22-Jul-2022 |
Matthias Kaehlcke <mka@chromium.org> |
arm64: dts: qcom: sc7180-trogdor: Add nodes for onboard USB hub
Add nodes for the onboard USB hub on trogdor devices. Remove the
'always-on' property from the hub regulator, since the regulator
is n
arm64: dts: qcom: sc7180-trogdor: Add nodes for onboard USB hub
Add nodes for the onboard USB hub on trogdor devices. Remove the
'always-on' property from the hub regulator, since the regulator
is now managed by the onboard_usb_hub driver.
For anyone using trogdor-based devices on Linux, it should be
noted that this requires "CONFIG_USB_ONBOARD_HUB=y".
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220722093238.v24.1.I7a1a6448d50bdd38e6082204a9818c59cc7a9bfd@changeid
show more ...
|
|
Revision tags: v5.15.56, v5.15.55, v5.15.54, v5.15.53, v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48, v5.15.47, v5.15.46, v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36 |
|
| #
19794489 |
| 26-Apr-2022 |
Stephen Boyd <swboyd@chromium.org> |
arm64: dts: qcom: Only include sc7180.dtsi in sc7180-trogdor.dtsi
The SoC is always present on sc7180-trogdor.dtsi and thus we should
include it in the "generic" dtsi file for trogdor. Previously we
arm64: dts: qcom: Only include sc7180.dtsi in sc7180-trogdor.dtsi
The SoC is always present on sc7180-trogdor.dtsi and thus we should
include it in the "generic" dtsi file for trogdor. Previously we had
removed it from there because we had to do the spi6/spi0 swizzle, so
each trogdor variant board had to include sc7180.dtsi and then
sc7180-trogdor.dtsi so that the latter dtsi file could modify the right
spi bus for EC and H1 properties that are common to all trogdor boards.
Now that we're done with that we can replace sc7180.dtsi includes with
sc7180-trogdor.dtsi and include sc7180.dtsi in sc7180-trogdor.dtsi as
was originally intended. We still need to include sc7180-trogdor.dtsi
before the bridge dtsi files though because those rely on the panel
label.
Cc: "Joseph S. Barrera III" <joebar@chromium.org>
Cc: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220427020339.360855-4-swboyd@chromium.org
show more ...
|
|
Revision tags: v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.16, v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15 |
|
| #
7624b41b |
| 29-Oct-2021 |
Philip Chen <philipchen@chromium.org> |
arm64: dts: qcom: sc7180: Support Lazor/Limozeen rev9
Support Lazor/Limozeen rev9 board where Parade ps8640 is added as the
second source edp bridge.
To support different edp bridge chips in differ
arm64: dts: qcom: sc7180: Support Lazor/Limozeen rev9
Support Lazor/Limozeen rev9 board where Parade ps8640 is added as the
second source edp bridge.
To support different edp bridge chips in different board revisions,
now we move the #incldue line of the edp bridge dts fragment (e.g.
sc7180-trogdor-ti-sn65dsi86.dtsi) from "sc7180-trogdor-lazor.dtsi" to
per-board-rev dts files.
Since the edp bridge dts fragment overrides 'dsi0_out', which is
defined in "sc7180.dtsi", move the #incldue line of "sc7180.dtsi" from
"sc7180-trogdor-lazor.dtsi" to per-board-rev dts files too, before
the #include line of the edp bridge dts fragment.
Signed-off-by: Philip Chen <philipchen@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211029152647.v3.3.Ie56f55924f5c7706fe3194e710bbef6fdb8b5bc6@changeid
show more ...
|
|
Revision tags: v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46 |
|
| #
8e4167f3 |
| 18-Jun-2021 |
Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
Revert "arm64: dts: qcom: sc7180-trogdor: Add nodes for onboard USB hub"
This reverts commit 1da8116eb0c5dfc05cfb89896239badb18c4daf3.
It causes merge issues with linux-next, and there are larger b
Revert "arm64: dts: qcom: sc7180-trogdor: Add nodes for onboard USB hub"
This reverts commit 1da8116eb0c5dfc05cfb89896239badb18c4daf3.
It causes merge issues with linux-next, and there are larger build
problems overall with this patch series, so the whole thing is being
reverted for now.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lore.kernel.org/r/20210617144346.564be887@canb.auug.org.au
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
|
Revision tags: v5.10.43 |
|
| #
1da8116e |
| 09-Jun-2021 |
Matthias Kaehlcke <mka@chromium.org> |
arm64: dts: qcom: sc7180-trogdor: Add nodes for onboard USB hub
Add nodes for the onboard USB hub on trogdor devices. Remove the
'always-on' property from the hub regulator, since the regulator
is n
arm64: dts: qcom: sc7180-trogdor: Add nodes for onboard USB hub
Add nodes for the onboard USB hub on trogdor devices. Remove the
'always-on' property from the hub regulator, since the regulator
is now managed by the onboard_usb_hub driver.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/20210609150159.v12.5.Ie0d2c1214b767bb5551dd4cad38398bd40e4466f@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
|
Revision tags: v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26 |
|
| #
39441f73 |
| 22-Mar-2021 |
Matthias Kaehlcke <mka@chromium.org> |
arm64: dts: qcom: sc7180: lazor: Simplify disabling of charger thermal zone
Commit f73558cc83d1 ("arm64: dts: qcom: sc7180: Disable charger
thermal zone for lazor") disables the charger thermal zone
arm64: dts: qcom: sc7180: lazor: Simplify disabling of charger thermal zone
Commit f73558cc83d1 ("arm64: dts: qcom: sc7180: Disable charger
thermal zone for lazor") disables the charger thermal zone for
specific lazor revisions due to an unsupported thermistor type.
The initial idea was to disable the thermal zone for older
revisions and leave it enabled for newer ones that use a
supported thermistor. Finally the thermistor won't be changed
on newer revisions, hence the thermal zone should be disabled
for all lazor (and limozeen) revisions. Instead of disabling
it per revision do it once in the shared .dtsi for lazor.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20210322094628.v4.1.I6d587e7ae72a5a47253bb95dfdc3158f8cc8a157@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
show more ...
|
|
Revision tags: v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101 |
|
| #
29edb44d |
| 25-Feb-2021 |
Matthias Kaehlcke <mka@chromium.org> |
arm64: dts: qcom: sc7180: Disable charger thermal zone for lazor
Lazor is stuffed with a 47k NTC as thermistor for the charger
temperature which currently isn't supported by the PM6150 ADC
driver. D
arm64: dts: qcom: sc7180: Disable charger thermal zone for lazor
Lazor is stuffed with a 47k NTC as thermistor for the charger
temperature which currently isn't supported by the PM6150 ADC
driver. Disable the charger thermal zone to avoid the use of
bogus temperature values.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/20210225103330.v2.2.Ia4c1022191d09fe8c56a16486b77796b83ffcae4@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
show more ...
|
|
Revision tags: v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10 |
|
| #
066c2a94 |
| 24-Nov-2020 |
Matthias Kaehlcke <mka@chromium.org> |
arm64: dts: qcom: sc7180-trogdor: Make pp3300_a the default supply for pp3300_hub
The trogdor design has two options for supplying the 'pp3300_hub' power
rail, it can be supplied by 'pp3300_l7c' or
arm64: dts: qcom: sc7180-trogdor: Make pp3300_a the default supply for pp3300_hub
The trogdor design has two options for supplying the 'pp3300_hub' power
rail, it can be supplied by 'pp3300_l7c' or 'pp3300_a'. The 'pp3300_a'
path includes a load switch that can be controlled through GPIO84.
Initially trogdor boards used 'pp3300_l7c' to power the USB hub, newer
revisions (will) use 'pp3300_a' as supply for 'pp3300_hub'.
Add a DT node for the 'pp3300_a' path and a pinctrl entry for the GPIO.
Make this path the default and keep trogdor rev1, lazor rev0 and rev1
on 'pp3300_l7c'. These earlier revisions also allocated the GPIO to the
purpose of controlling the power switch, so there is no need to limit
the pinctrl config to newer revisions. Remove the platform-wide
'always/boot-on' properties from 'pp3300_l7c' and add them to the
boards that use this supply. Also delete the 'always/boot-on'
properties of 'pp3300_hub' for these boards.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20201124164714.v4.1.I0ed4abdd2b2916fbedf76be254bc3457fb8b9655@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
show more ...
|
| #
ba73ce9d |
| 06-Nov-2020 |
Matthias Kaehlcke <mka@chromium.org> |
arm64: dts: qcom: sc7180: Add sc7180-lazor-r2/r3
Add configs for lazor rev2 and rev3. There are no relevant deltas
between rev1 and rev2, so just add the rev2 compatible string to the
rev1 config.
arm64: dts: qcom: sc7180: Add sc7180-lazor-r2/r3
Add configs for lazor rev2 and rev3. There are no relevant deltas
between rev1 and rev2, so just add the rev2 compatible string to the
rev1 config.
One important delta in rev3 is a switch of the power supply for the
onboard USB hub from 'pp3300_l7c' to 'pp3300_a' + a load switch. The
actual regulator switch is done by the patch 'arm64: dts: qcom:
sc7180-trogdor: Make pp3300_a the default supply for pp3300_hub',
since it affects the entire trogdor platform. Here we only add the
.dts files for lazor rev3 and replace the generic compatible entries
in the rev1 .dts files.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/20201106140125.v3.1.I5a75056d573808f40fed22ab7d28ea6be5819f84@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
show more ...
|
|
Revision tags: v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62 |
|
| #
7ec3e673 |
| 28-Aug-2020 |
Rob Clark <robdclark@chromium.org> |
arm64: dts: qcom: sc7180-trogdor: add initial trogdor and lazor dt
This is essentialy a squash of a bunch of history of trogdor and lazor
dt updates from the chromium kernel tree.
I don't claim any
arm64: dts: qcom: sc7180-trogdor: add initial trogdor and lazor dt
This is essentialy a squash of a bunch of history of trogdor and lazor
dt updates from the chromium kernel tree.
I don't claim any credit other than wanting to more easily boot upstream
kernel on these devices.
I've tried to add cc tags for all the original authors.
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Atul Dhudase <adhudase@codeaurora.org>
Cc: Venkata Lakshmi Narayana Gubba <gubbaven@codeaurora.org>
Cc: Evan Green <evgreen@chromium.org>
Cc: Cheng-Yi Chiang <cychiang@chromium.org>
Cc: Ajit Pandey <ajitp@codeaurora.org>
Cc: Alexandru Stan <amstan@chromium.org>
Cc: Sujit Kautkar <sujitka@chromium.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20200828204052.2085508-1-robdclark@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
show more ...
|
|
Revision tags: v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62 |
|
| #
7ec3e673 |
| 28-Aug-2020 |
Rob Clark <robdclark@chromium.org> |
arm64: dts: qcom: sc7180-trogdor: add initial trogdor and lazor dt
This is essentialy a squash of a bunch of history of trogdor and lazor
dt updates from the chromium kernel tree.
arm64: dts: qcom: sc7180-trogdor: add initial trogdor and lazor dt
This is essentialy a squash of a bunch of history of trogdor and lazor
dt updates from the chromium kernel tree.
I don't claim any credit other than wanting to more easily boot upstream
kernel on these devices.
I've tried to add cc tags for all the original authors.
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Atul Dhudase <adhudase@codeaurora.org>
Cc: Venkata Lakshmi Narayana Gubba <gubbaven@codeaurora.org>
Cc: Evan Green <evgreen@chromium.org>
Cc: Cheng-Yi Chiang <cychiang@chromium.org>
Cc: Ajit Pandey <ajitp@codeaurora.org>
Cc: Alexandru Stan <amstan@chromium.org>
Cc: Sujit Kautkar <sujitka@chromium.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20200828204052.2085508-1-robdclark@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
show more ...
|