|
Revision tags: v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45, v6.1.44, v6.1.43, v6.1.42 |
|
| #
074248a4 |
| 25-Jul-2023 |
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> |
arm64: dts: imx8mm-phycore: drop uncorrect vselect-en
There is no "vselect-en" property, neither in the bindings nor in the
Linux driver:
imx8mm-phyboard-polis-rdk.dtb: pmic@8: regulators:ldo2: U
arm64: dts: imx8mm-phycore: drop uncorrect vselect-en
There is no "vselect-en" property, neither in the bindings nor in the
Linux driver:
imx8mm-phyboard-polis-rdk.dtb: pmic@8: regulators:ldo2: Unevaluated properties are not allowed ('vselect-en' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Yannic Moog <y.moog@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
show more ...
|
|
Revision tags: v6.1.41, v6.1.40, v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35 |
|
| #
1ef0aa13 |
| 16-Jun-2023 |
Yashwanth Varakala <y.varakala@phytec.de> |
arm64: dts: phycore-imx8mm: Correction in gpio-line-names
Remove unused nINT_ETHPHY entry from gpio-line-names in gpio1 nodes of
phyCORE-i.MX8MM and phyBOARD-Polis-i.MX8MM devicetrees.
Fixes: ae684
arm64: dts: phycore-imx8mm: Correction in gpio-line-names
Remove unused nINT_ETHPHY entry from gpio-line-names in gpio1 nodes of
phyCORE-i.MX8MM and phyBOARD-Polis-i.MX8MM devicetrees.
Fixes: ae6847f26ac9 ("arm64: dts: freescale: Add phyBOARD-Polis-i.MX8MM support")
Signed-off-by: Yashwanth Varakala <y.varakala@phytec.de>
Signed-off-by: Cem Tenruh <c.tenruh@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
show more ...
|
| #
cddeefc1 |
| 16-Jun-2023 |
Yashwanth Varakala <y.varakala@phytec.de> |
arm64: dts: phycore-imx8mm: Label typo-fix of VPU
Corrected the label of the VPU regulator node (buck 3)
from reg_vdd_gpu to reg_vdd_vpu.
Fixes: ae6847f26ac9 ("arm64: dts: freescale: Add phyBOARD-P
arm64: dts: phycore-imx8mm: Label typo-fix of VPU
Corrected the label of the VPU regulator node (buck 3)
from reg_vdd_gpu to reg_vdd_vpu.
Fixes: ae6847f26ac9 ("arm64: dts: freescale: Add phyBOARD-Polis-i.MX8MM support")
Signed-off-by: Yashwanth Varakala <y.varakala@phytec.de>
Signed-off-by: Cem Tenruh <c.tenruh@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
show more ...
|
| #
3d8f8ceb |
| 16-Jun-2023 |
Yannic Moog <y.moog@phytec.de> |
arm64: dts: phycore-imx8mm: fix nor mtd partitions
Add #address-cells and #size-cells properties to som_flash. This
enables correct parsing of added SPI NOR mtd partition child nodes that
are set in
arm64: dts: phycore-imx8mm: fix nor mtd partitions
Add #address-cells and #size-cells properties to som_flash. This
enables correct parsing of added SPI NOR mtd partition child nodes that
are set in the bootloader.
Signed-off-by: Yannic Moog <y.moog@phytec.de>
Signed-off-by: Cem Tenruh <c.tenruh@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
show more ...
|
|
Revision tags: v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22, v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77 |
|
| #
0c068a36 |
| 02-Nov-2022 |
Marek Vasut <marex@denx.de> |
arm64: dts: imx8mm: imx8mn: imx8mp: imx8mq: Replace opp-xM with opp-x000000
Fix the following dtbs_check warning on all of i.MX8M variants:
"
opp-table: Unevaluated properties are not allowed ('opp-
arm64: dts: imx8mm: imx8mn: imx8mp: imx8mq: Replace opp-xM with opp-x000000
Fix the following dtbs_check warning on all of i.MX8M variants:
"
opp-table: Unevaluated properties are not allowed ('opp-25M', 'opp-100M', 'opp-750M' were unexpected)
"
Using the following command:
"
$ sed -i '/opp-[0-9]\+M/ s@M {@000000 {@' arch/arm64/boot/dts/freescale/imx8m*
"
The Documentation/devicetree/bindings/opp/opp-v2-base.yaml expects the OPP
subnode names to be full frequency listings in Hz without unit suffixes.
Only the i.MX8M DTs are affected per "git grep 'opp-[0-9]\+M'", so fix them.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
show more ...
|
|
Revision tags: v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70, v5.15.69, v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62, v5.15.61, v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55, v5.15.54, v5.15.53, v5.15.52, v5.15.51, v5.15.50 |
|
| #
ae6847f2 |
| 23-Jun-2022 |
Teresa Remmet <t.remmet@phytec.de> |
arm64: dts: freescale: Add phyBOARD-Polis-i.MX8MM support
Add initial support for phyBOARD-Polis-i.MX8MM.
Main features are:
* Bluetooth and Wifi
* CANFD
* eMMC
* i2c RTC
* Ethernet
* PCIe
*
arm64: dts: freescale: Add phyBOARD-Polis-i.MX8MM support
Add initial support for phyBOARD-Polis-i.MX8MM.
Main features are:
* Bluetooth and Wifi
* CANFD
* eMMC
* i2c RTC
* Ethernet
* PCIe
* RS232/RS485
* SD-Card
* SPI-NOR flash
* USB
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
show more ...
|