Revision tags: v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45, v6.1.44, v6.1.43, v6.1.42, v6.1.41, v6.1.40, v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35, v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22, v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12 |
|
#
b025b4f5 |
| 02-Dec-2022 |
Geert Uytterhoeven <geert+renesas@glider.be> |
arm64: dts: freescale: Fix pca954x i2c-mux node names
"make dtbs_check":
arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dtb: pca9547@77: $nodename:0: 'pca9547@77' does not match '^(i2c-?)?mux'
arm64: dts: freescale: Fix pca954x i2c-mux node names
"make dtbs_check":
arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dtb: pca9547@77: $nodename:0: 'pca9547@77' does not match '^(i2c-?)?mux' From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dtb: pca9547@77: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'i2c@4' were unexpected) From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml ...
Fix this by renaming PCA954x nodes to "i2c-mux", to match the I2C bus multiplexer/switch DT bindings and the Generic Names Recommendation in the Devicetree Specification.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
show more ...
|
Revision tags: v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70, v5.15.69, v5.15.68 |
|
#
822f91d5 |
| 14-Sep-2022 |
Biwen Li <biwen.li@nxp.com> |
arm64: dts: ls208xa-rdb: fix errata E-00013
Specify a channel zero in idle state to avoid enterring tri-stated state for PCA9547.
Some information about E-00013: - Description: I2C1 and I2C3 buses
arm64: dts: ls208xa-rdb: fix errata E-00013
Specify a channel zero in idle state to avoid enterring tri-stated state for PCA9547.
Some information about E-00013: - Description: I2C1 and I2C3 buses are missing pull-up. - Impact: When the PCA954x device is tri-stated, the I2C bus will float. This makes the I2C bus and its associated downstream devices inaccessible. - Hardware fix: Populate resistors R189 and R190 for I2C1 and resistors R228 and R229 for I2C3. - Software fix: Remove the tri-state option from the PCA954x driver(PCA954x always on enable status, specify a channel zero in dts to fix the errata E-00013).
Signed-off-by: Biwen Li <biwen.li@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
show more ...
|
Revision tags: v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62, v5.15.61, v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55, v5.15.54, v5.15.53, v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48, v5.15.47, v5.15.46, v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34, v5.15.33 |
|
#
aba3a3fb |
| 07-Apr-2022 |
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> |
arm64: dts: freescale: align SPI NOR node name with dtschema
The node names should be generic and SPI NOR dtschema expects "flash".
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.or
arm64: dts: freescale: align SPI NOR node name with dtschema
The node names should be generic and SPI NOR dtschema expects "flash".
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
show more ...
|
Revision tags: v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.16, v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10 |
|
#
6f5851a8 |
| 30-Nov-2020 |
Biwen Li <biwen.li@nxp.com> |
arm64: dts: ls208xa-rdb: add interrupt line for RTC node
Add interrupt line for RTC node on ls208xa-rdb
Signed-off-by: Biwen Li <biwen.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
Revision tags: v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6 |
|
#
73d58260 |
| 20-Dec-2019 |
Kuldeep Singh <kuldeep.singh@nxp.com> |
arm64: dts: ls208xa: Update qspi node properties for LS2088ARDB
LS2088ADB has one spansion flash s25fs512s of size 64M.
Add qspi dts entry for the board using compatibles as "jedec,spi-nor" to prob
arm64: dts: ls208xa: Update qspi node properties for LS2088ARDB
LS2088ADB has one spansion flash s25fs512s of size 64M.
Add qspi dts entry for the board using compatibles as "jedec,spi-nor" to probe flash successfully. Also, align properties with other board dts properties.
Use dt-bindings constants in interrupts instead of using numbers.
Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
show more ...
|
Revision tags: v5.4.5, v5.4.4, v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7, v5.2.6, v5.2.5, v5.2.4, v5.2.3, v5.2.2, v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8, v5.1.7, v5.1.6, v5.1.5, v5.1.4, v5.1.3, v5.1.2, v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11, v5.0.10, v5.0.9, v5.0.8, v5.0.7, v5.0.6, v5.0.5, v5.0.4, v5.0.3, v4.19.29, v5.0.2, v4.19.28, v5.0.1, v4.19.27, v5.0, v4.19.26, v4.19.25, v4.19.24, v4.19.23, v4.19.22, v4.19.21, v4.19.20, v4.19.19, v4.19.18, v4.19.17, v4.19.16, v4.19.15, v4.19.14, v4.19.13, v4.19.12, v4.19.11, v4.19.10, v4.19.9, v4.19.8, v4.19.7, v4.19.6, v4.19.5, v4.19.4, v4.18.20, v4.19.3, v4.18.19, v4.19.2, v4.18.18, v4.18.17, v4.19.1, v4.19, v4.18.16, v4.18.15, v4.18.14, v4.18.13, v4.18.12, v4.18.11, v4.18.10, v4.18.9, v4.18.7, v4.18.6, v4.18.5, v4.17.18, v4.18.4, v4.18.3, v4.17.17, v4.18.2, v4.17.16, v4.17.15, v4.18.1, v4.18, v4.17.14, v4.17.13, v4.17.12, v4.17.11, v4.17.10, v4.17.9, v4.17.8, v4.17.7, v4.17.6, v4.17.5, v4.17.4, v4.17.3, v4.17.2 |
|
#
7a2aeb91 |
| 12-Jun-2018 |
Li Yang <leoyang.li@nxp.com> |
arm64: dts: freescale: Update to use SPDX identifiers
Replace license text with corresponding SPDX identifiers and update the format of existing SPDX identifiers to follow the new guideline Document
arm64: dts: freescale: Update to use SPDX identifiers
Replace license text with corresponding SPDX identifiers and update the format of existing SPDX identifiers to follow the new guideline Documentation/process/license-rules.rst.
Note that some of the files mentioned X11 license previously but the license text actually matches MIT license.
Signed-off-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
show more ...
|
Revision tags: v4.17.1, v4.17 |
|
#
c326ff59 |
| 24-Apr-2018 |
Fabio Estevam <fabio.estevam@nxp.com> |
arm64: dts: ls208xa-rdb: Pass unit name to SPI flash node
Pass unit name to SPI flash node to match its 'reg' value and also avoid the following DTC warnings:
arch/arm64/boot/dts/freescale/fsl-ls20
arm64: dts: ls208xa-rdb: Pass unit name to SPI flash node
Pass unit name to SPI flash node to match its 'reg' value and also avoid the following DTC warnings:
arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dtb: Warning (unit_address_vs_reg): /soc/dspi@2100000/n25q512a: node has a reg or ranges property, but no unit name arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dtb: Warning (unit_address_vs_reg): /soc/dspi@2100000/n25q512a: node has a reg or ranges property, but no unit name
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
show more ...
|
Revision tags: v4.16, v4.15 |
|
#
1e333007 |
| 25-Dec-2017 |
Yuantian Tang <andy.tang@nxp.com> |
arm64: dts: ls208xa: add power monitor chip node
Ina220 chip was used on ls208xardb platform to monitor power comsumption. So add ina220 chip node in dts to enable power consumption monitor feature.
arm64: dts: ls208xa: add power monitor chip node
Ina220 chip was used on ls208xardb platform to monitor power comsumption. So add ina220 chip node in dts to enable power consumption monitor feature.
Signed-off-by: Tang Yuantian <andy.tang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
show more ...
|
Revision tags: v4.13.16, v4.14, v4.13.5, v4.13, v4.12 |
|
#
715c32da |
| 31-May-2017 |
yinbo.zhu <yinbo.zhu@nxp.com> |
arm64: dts: ls208xa: disable SD UHS-I modes by default on RDB
Currently SD UHS-I modes were enabled by default on LS208xARDB boards, but the new LS2088ARDB RevF board didn't support them any more si
arm64: dts: ls208xa: disable SD UHS-I modes by default on RDB
Currently SD UHS-I modes were enabled by default on LS208xARDB boards, but the new LS2088ARDB RevF board didn't support them any more since SDHC circuit had been reworked. This patch is to disable SD UHS-I modes by default in case of any issue on LS2088ARDB RevF
Signed-off-by: yinbo.zhu <yinbo.zhu@nxp.com> Acked-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
show more ...
|
Revision tags: v4.10.17, v4.10.16 |
|
#
6557a16c |
| 08-May-2017 |
Yangbo Lu <yangbo.lu@nxp.com> |
arm64: dts: ls208xa: support SD UHS-I on RDB and eMMC HS200 on QDS
This patch is to enable SD UHS-I mode on LS208xRDB and eMMC HS200 mode on LS208xQDS in dts. Also, the eSDHC peripheral clock must b
arm64: dts: ls208xa: support SD UHS-I on RDB and eMMC HS200 on QDS
This patch is to enable SD UHS-I mode on LS208xRDB and eMMC HS200 mode on LS208xQDS in dts. Also, the eSDHC peripheral clock must be used instead of platform clock to support these modes.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
show more ...
|
Revision tags: v4.10.15, v4.10.14 |
|
#
8637f58b |
| 27-Apr-2017 |
Li Yang <leoyang.li@nxp.com> |
arm64: dts: freescale: update the copyright claims
Update the copyright claims to comply with company policy.
Signed-off-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.o
arm64: dts: freescale: update the copyright claims
Update the copyright claims to comply with company policy.
Signed-off-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
show more ...
|
Revision tags: v4.10.13, v4.10.12, v4.10.11, v4.10.10, v4.10.9, v4.10.8, v4.10.7, v4.10.6, v4.10.5, v4.10.4, v4.10.3, v4.10.2, v4.10.1, v4.10 |
|
#
c2f6a472 |
| 01-Feb-2017 |
Abhimanyu Saini <abhimanyu.saini@nxp.com> |
arm64: dts: freescale: ls2080a: Split devicetree for code resuability
LS2088A and LS2080A are similar SoCs with a few differences like ARM cores etc.
Reorganize the LS2080A device tree to move the
arm64: dts: freescale: ls2080a: Split devicetree for code resuability
LS2088A and LS2080A are similar SoCs with a few differences like ARM cores etc.
Reorganize the LS2080A device tree to move the common nodes to: - fsl-ls208xa.dtsi - fsl-ls208xa-rdb.dtsi - fsl-ls208xa-qds.dtsi
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Ashish Kumar <ashish.kumar@nxp.com> Signed-off-by: Abhimanyu Saini <abhimanyu.saini@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
show more ...
|
Revision tags: v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6 |
|
#
73d58260 |
| 20-Dec-2019 |
Kuldeep Singh <kuldeep.singh@nxp.com> |
arm64: dts: ls208xa: Update qspi node properties for LS2088ARDB LS2088ADB has one spansion flash s25fs512s of size 64M. Add qspi dts entry for the board using compatibles as "jedec,
arm64: dts: ls208xa: Update qspi node properties for LS2088ARDB LS2088ADB has one spansion flash s25fs512s of size 64M. Add qspi dts entry for the board using compatibles as "jedec,spi-nor" to probe flash successfully. Also, align properties with other board dts properties. Use dt-bindings constants in interrupts instead of using numbers. Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
show more ...
|
Revision tags: v5.4.5, v5.4.4, v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7, v5.2.6, v5.2.5, v5.2.4, v5.2.3, v5.2.2, v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8, v5.1.7, v5.1.6, v5.1.5, v5.1.4, v5.1.3, v5.1.2, v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11, v5.0.10, v5.0.9, v5.0.8, v5.0.7, v5.0.6, v5.0.5, v5.0.4, v5.0.3, v4.19.29, v5.0.2, v4.19.28, v5.0.1, v4.19.27, v5.0, v4.19.26, v4.19.25, v4.19.24, v4.19.23, v4.19.22, v4.19.21, v4.19.20, v4.19.19, v4.19.18, v4.19.17, v4.19.16, v4.19.15, v4.19.14, v4.19.13, v4.19.12, v4.19.11, v4.19.10, v4.19.9, v4.19.8, v4.19.7, v4.19.6, v4.19.5, v4.19.4, v4.18.20, v4.19.3, v4.18.19, v4.19.2, v4.18.18, v4.18.17, v4.19.1, v4.19, v4.18.16, v4.18.15, v4.18.14, v4.18.13, v4.18.12, v4.18.11, v4.18.10, v4.18.9, v4.18.7, v4.18.6, v4.18.5, v4.17.18, v4.18.4, v4.18.3, v4.17.17, v4.18.2, v4.17.16, v4.17.15, v4.18.1, v4.18, v4.17.14, v4.17.13, v4.17.12, v4.17.11, v4.17.10, v4.17.9, v4.17.8, v4.17.7, v4.17.6, v4.17.5, v4.17.4, v4.17.3, v4.17.2 |
|
#
7a2aeb91 |
| 12-Jun-2018 |
Li Yang <leoyang.li@nxp.com> |
arm64: dts: freescale: Update to use SPDX identifiers Replace license text with corresponding SPDX identifiers and update the format of existing SPDX identifiers to follow the new guidel
arm64: dts: freescale: Update to use SPDX identifiers Replace license text with corresponding SPDX identifiers and update the format of existing SPDX identifiers to follow the new guideline Documentation/process/license-rules.rst. Note that some of the files mentioned X11 license previously but the license text actually matches MIT license. Signed-off-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
show more ...
|
Revision tags: v4.17.1, v4.17 |
|
#
c326ff59 |
| 24-Apr-2018 |
Fabio Estevam <fabio.estevam@nxp.com> |
arm64: dts: ls208xa-rdb: Pass unit name to SPI flash node Pass unit name to SPI flash node to match its 'reg' value and also avoid the following DTC warnings: arch/arm64/boot/dt
arm64: dts: ls208xa-rdb: Pass unit name to SPI flash node Pass unit name to SPI flash node to match its 'reg' value and also avoid the following DTC warnings: arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dtb: Warning (unit_address_vs_reg): /soc/dspi@2100000/n25q512a: node has a reg or ranges property, but no unit name arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dtb: Warning (unit_address_vs_reg): /soc/dspi@2100000/n25q512a: node has a reg or ranges property, but no unit name Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
show more ...
|
Revision tags: v4.16, v4.15 |
|
#
1e333007 |
| 25-Dec-2017 |
Yuantian Tang <andy.tang@nxp.com> |
arm64: dts: ls208xa: add power monitor chip node Ina220 chip was used on ls208xardb platform to monitor power comsumption. So add ina220 chip node in dts to enable power consumption
arm64: dts: ls208xa: add power monitor chip node Ina220 chip was used on ls208xardb platform to monitor power comsumption. So add ina220 chip node in dts to enable power consumption monitor feature. Signed-off-by: Tang Yuantian <andy.tang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
show more ...
|
Revision tags: v4.13.16, v4.14, v4.13.5, v4.13, v4.12 |
|
#
715c32da |
| 31-May-2017 |
yinbo.zhu <yinbo.zhu@nxp.com> |
arm64: dts: ls208xa: disable SD UHS-I modes by default on RDB Currently SD UHS-I modes were enabled by default on LS208xARDB boards, but the new LS2088ARDB RevF board didn't support them
arm64: dts: ls208xa: disable SD UHS-I modes by default on RDB Currently SD UHS-I modes were enabled by default on LS208xARDB boards, but the new LS2088ARDB RevF board didn't support them any more since SDHC circuit had been reworked. This patch is to disable SD UHS-I modes by default in case of any issue on LS2088ARDB RevF Signed-off-by: yinbo.zhu <yinbo.zhu@nxp.com> Acked-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
show more ...
|
Revision tags: v4.10.17, v4.10.16 |
|
#
6557a16c |
| 08-May-2017 |
Yangbo Lu <yangbo.lu@nxp.com> |
arm64: dts: ls208xa: support SD UHS-I on RDB and eMMC HS200 on QDS This patch is to enable SD UHS-I mode on LS208xRDB and eMMC HS200 mode on LS208xQDS in dts. Also, the eSDHC peripheral
arm64: dts: ls208xa: support SD UHS-I on RDB and eMMC HS200 on QDS This patch is to enable SD UHS-I mode on LS208xRDB and eMMC HS200 mode on LS208xQDS in dts. Also, the eSDHC peripheral clock must be used instead of platform clock to support these modes. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
show more ...
|
Revision tags: v4.10.15, v4.10.14 |
|
#
8637f58b |
| 27-Apr-2017 |
Li Yang <leoyang.li@nxp.com> |
arm64: dts: freescale: update the copyright claims Update the copyright claims to comply with company policy. Signed-off-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Shawn Gu
arm64: dts: freescale: update the copyright claims Update the copyright claims to comply with company policy. Signed-off-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
show more ...
|
Revision tags: v4.10.13, v4.10.12, v4.10.11, v4.10.10, v4.10.9, v4.10.8, v4.10.7, v4.10.6, v4.10.5, v4.10.4, v4.10.3, v4.10.2, v4.10.1, v4.10 |
|
#
c2f6a472 |
| 01-Feb-2017 |
Abhimanyu Saini <abhimanyu.saini@nxp.com> |
arm64: dts: freescale: ls2080a: Split devicetree for code resuability LS2088A and LS2080A are similar SoCs with a few differences like ARM cores etc. Reorganize the LS2080A devi
arm64: dts: freescale: ls2080a: Split devicetree for code resuability LS2088A and LS2080A are similar SoCs with a few differences like ARM cores etc. Reorganize the LS2080A device tree to move the common nodes to: - fsl-ls208xa.dtsi - fsl-ls208xa-rdb.dtsi - fsl-ls208xa-qds.dtsi Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Ashish Kumar <ashish.kumar@nxp.com> Signed-off-by: Abhimanyu Saini <abhimanyu.saini@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
show more ...
|