|
Revision tags: v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45, v6.1.44, v6.1.43, v6.1.42, v6.1.41 |
|
| #
6387e0aa |
| 24-Jul-2023 |
Huqiang Qin <huqiang.qin@amlogic.com> |
arm64: dts: Replace the IRQ number with the IRQID macro definition
Replacing IRQ numbers with IRQID macro definitions makes node properties
easier to understand and also makes GPIO interrupts easier
arm64: dts: Replace the IRQ number with the IRQID macro definition
Replacing IRQ numbers with IRQID macro definitions makes node properties
easier to understand and also makes GPIO interrupts easier to use.
Associated platforms:
- Amlogic Meson-G12A
- Amlogic Meson-G12B
- Amlogic Meson-SM1
Signed-off-by: Huqiang Qin <huqiang.qin@amlogic.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230724060108.1403662-4-huqiang.qin@amlogic.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
show more ...
|
|
Revision tags: v6.1.40, v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35, v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22, v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70, v5.15.69, v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62, v5.15.61, v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55, v5.15.54, v5.15.53, v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48, v5.15.47, v5.15.46, v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.16, v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7 |
|
| #
62183863 |
| 19-Sep-2021 |
Anand Moon <linux.amoon@gmail.com> |
arm64: dts: meson-g12b: Fix the pwm regulator supply properties
After enabling CONFIG_REGULATOR_DEBUG=y we observer below debug logs.
Changes help link VDDCP_A and VDDCPU_B pwm regulator to 12V regu
arm64: dts: meson-g12b: Fix the pwm regulator supply properties
After enabling CONFIG_REGULATOR_DEBUG=y we observer below debug logs.
Changes help link VDDCP_A and VDDCPU_B pwm regulator to 12V regulator
supply instead of dummy regulator.
[ 4.147196] VDDCPU_A: will resolve supply early: pwm
[ 4.147216] pwm-regulator regulator-vddcpu-a: Looking up pwm-supply from device tree
[ 4.147227] pwm-regulator regulator-vddcpu-a: Looking up pwm-supply property in node /regulator-vddcpu-a failed
[ 4.147258] VDDCPU_A: supplied by regulator-dummy
[ 4.147288] regulator-dummy: could not add device link regulator.12: -ENOENT
[ 4.147353] VDDCPU_A: 721 <--> 1022 mV at 871 mV, enabled
[ 4.152014] VDDCPU_B: will resolve supply early: pwm
[ 4.152035] pwm-regulator regulator-vddcpu-b: Looking up pwm-supply from device tree
[ 4.152047] pwm-regulator regulator-vddcpu-b: Looking up pwm-supply property in node /regulator-vddcpu-b failed
[ 4.152079] VDDCPU_B: supplied by regulator-dummy
[ 4.152108] regulator-dummy: could not add device link regulator.13: -ENOENT
Fixes: c6d29c66e582 ("arm64: dts: meson-g12b-khadas-vim3: add initial device-tree")
Fixes: d14734a04a8a ("arm64: dts: meson-g12b-odroid-n2: enable DVFS")
Fixes: 3cb74db9b256 ("arm64: dts: meson: convert ugoos-am6 to common w400 dtsi")
Cc: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20210919202918.3556-3-linux.amoon@gmail.com
show more ...
|
| #
2b9828e4 |
| 19-Sep-2021 |
Anand Moon <linux.amoon@gmail.com> |
arm64: dts: meson-g12b: Fix the pwm regulator supply properties
[ Upstream commit 62183863f708c2464769e0d477c8ce9f3d326feb ]
After enabling CONFIG_REGULATOR_DEBUG=y we observer below debug logs.
Ch
arm64: dts: meson-g12b: Fix the pwm regulator supply properties
[ Upstream commit 62183863f708c2464769e0d477c8ce9f3d326feb ]
After enabling CONFIG_REGULATOR_DEBUG=y we observer below debug logs.
Changes help link VDDCP_A and VDDCPU_B pwm regulator to 12V regulator
supply instead of dummy regulator.
[ 4.147196] VDDCPU_A: will resolve supply early: pwm
[ 4.147216] pwm-regulator regulator-vddcpu-a: Looking up pwm-supply from device tree
[ 4.147227] pwm-regulator regulator-vddcpu-a: Looking up pwm-supply property in node /regulator-vddcpu-a failed
[ 4.147258] VDDCPU_A: supplied by regulator-dummy
[ 4.147288] regulator-dummy: could not add device link regulator.12: -ENOENT
[ 4.147353] VDDCPU_A: 721 <--> 1022 mV at 871 mV, enabled
[ 4.152014] VDDCPU_B: will resolve supply early: pwm
[ 4.152035] pwm-regulator regulator-vddcpu-b: Looking up pwm-supply from device tree
[ 4.152047] pwm-regulator regulator-vddcpu-b: Looking up pwm-supply property in node /regulator-vddcpu-b failed
[ 4.152079] VDDCPU_B: supplied by regulator-dummy
[ 4.152108] regulator-dummy: could not add device link regulator.13: -ENOENT
Fixes: c6d29c66e582 ("arm64: dts: meson-g12b-khadas-vim3: add initial device-tree")
Fixes: d14734a04a8a ("arm64: dts: meson-g12b-odroid-n2: enable DVFS")
Fixes: 3cb74db9b256 ("arm64: dts: meson: convert ugoos-am6 to common w400 dtsi")
Cc: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20210919202918.3556-3-linux.amoon@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
show more ...
|
|
Revision tags: v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10 |
|
| #
9e454e37 |
| 07-Dec-2020 |
Stefan Agner <stefan@agner.ch> |
arm64: dts: meson: g12b: w400: fix PHY deassert timing requirements
According to the datasheet (Rev. 1.9) the RTL8211F requires at least
72ms "for internal circuits settling time" before accessing t
arm64: dts: meson: g12b: w400: fix PHY deassert timing requirements
According to the datasheet (Rev. 1.9) the RTL8211F requires at least
72ms "for internal circuits settling time" before accessing the PHY
egisters. On similar boards with the same PHY this fixes an issue where
Ethernet link would not come up when using ip link set down/up.
Fixes: 2cd2310fca4c ("arm64: dts: meson-g12b-ugoos-am6: add initial device-tree")
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/46298e66572784c44f873f1b71cc4ab3d8fc5aa6.1607363522.git.stefan@agner.ch
show more ...
|
| #
608918e8 |
| 07-Dec-2020 |
Stefan Agner <stefan@agner.ch> |
arm64: dts: meson: g12b: w400: fix PHY deassert timing requirements
[ Upstream commit 9e454e37dc7c0ee9e108d70b983e7a71332aedff ]
According to the datasheet (Rev. 1.9) the RTL8211F requires at least
arm64: dts: meson: g12b: w400: fix PHY deassert timing requirements
[ Upstream commit 9e454e37dc7c0ee9e108d70b983e7a71332aedff ]
According to the datasheet (Rev. 1.9) the RTL8211F requires at least
72ms "for internal circuits settling time" before accessing the PHY
egisters. On similar boards with the same PHY this fixes an issue where
Ethernet link would not come up when using ip link set down/up.
Fixes: 2cd2310fca4c ("arm64: dts: meson-g12b-ugoos-am6: add initial device-tree")
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/46298e66572784c44f873f1b71cc4ab3d8fc5aa6.1607363522.git.stefan@agner.ch
Signed-off-by: Sasha Levin <sashal@kernel.org>
show more ...
|
|
Revision tags: v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53 |
|
| #
2fa17dd0 |
| 20-Jul-2020 |
Christian Hewitt <christianshewitt@gmail.com> |
arm64: dts: meson: misc fixups for w400 dtsi
Current devices using the W400 dtsi show mmc tuning errors:
[12483.917391] mmc0: tuning execution failed: -5
[30535.551221] mmc0: tuning execution faile
arm64: dts: meson: misc fixups for w400 dtsi
Current devices using the W400 dtsi show mmc tuning errors:
[12483.917391] mmc0: tuning execution failed: -5
[30535.551221] mmc0: tuning execution failed: -5
[35359.953671] mmc0: tuning execution failed: -5
[35561.875332] mmc0: tuning execution failed: -5
[61733.348709] mmc0: tuning execution failed: -5
Removing "sd-uhs-sdr50" from the SDIO node prevents this. We also add
keep-power-in-suspend to the SDIO node and fix an indentation.
Fixes: 3cb74db9b256 ("arm64: dts: meson: convert ugoos-am6 to common w400 dtsi")
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20200721013952.11635-1-christianshewitt@gmail.com
show more ...
|
|
Revision tags: v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42 |
|
| #
3cb74db9 |
| 19-May-2020 |
Christian Hewitt <christianshewitt@gmail.com> |
arm64: dts: meson: convert ugoos-am6 to common w400 dtsi
Convert the Ugoos AM6 dts into meson-g12b-w400.dtsi, and then create
a new AM6 dts that references it. This is in preparation for several
new
arm64: dts: meson: convert ugoos-am6 to common w400 dtsi
Convert the Ugoos AM6 dts into meson-g12b-w400.dtsi, and then create
a new AM6 dts that references it. This is in preparation for several
new G12B devices that will share the common w400 dtsi.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20200520014329.12469-2-christianshewitt@gmail.com
show more ...
|
| #
608918e8 |
| 07-Dec-2020 |
Stefan Agner <stefan@agner.ch> |
arm64: dts: meson: g12b: w400: fix PHY deassert timing requirements
[ Upstream commit 9e454e37dc7c0ee9e108d70b983e7a71332aedff ]
According to the datasheet (Rev. 1.9) the RTL8211F r
arm64: dts: meson: g12b: w400: fix PHY deassert timing requirements
[ Upstream commit 9e454e37dc7c0ee9e108d70b983e7a71332aedff ]
According to the datasheet (Rev. 1.9) the RTL8211F requires at least
72ms "for internal circuits settling time" before accessing the PHY
egisters. On similar boards with the same PHY this fixes an issue where
Ethernet link would not come up when using ip link set down/up.
Fixes: 2cd2310fca4c ("arm64: dts: meson-g12b-ugoos-am6: add initial device-tree")
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/46298e66572784c44f873f1b71cc4ab3d8fc5aa6.1607363522.git.stefan@agner.ch
Signed-off-by: Sasha Levin <sashal@kernel.org>
show more ...
|
|
Revision tags: v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53 |
|
| #
2fa17dd0 |
| 20-Jul-2020 |
Christian Hewitt <christianshewitt@gmail.com> |
arm64: dts: meson: misc fixups for w400 dtsi
Current devices using the W400 dtsi show mmc tuning errors:
[12483.917391] mmc0: tuning execution failed: -5
[30535.551221] mmc0: tu
arm64: dts: meson: misc fixups for w400 dtsi
Current devices using the W400 dtsi show mmc tuning errors:
[12483.917391] mmc0: tuning execution failed: -5
[30535.551221] mmc0: tuning execution failed: -5
[35359.953671] mmc0: tuning execution failed: -5
[35561.875332] mmc0: tuning execution failed: -5
[61733.348709] mmc0: tuning execution failed: -5
Removing "sd-uhs-sdr50" from the SDIO node prevents this. We also add
keep-power-in-suspend to the SDIO node and fix an indentation.
Fixes: 3cb74db9b256 ("arm64: dts: meson: convert ugoos-am6 to common w400 dtsi")
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20200721013952.11635-1-christianshewitt@gmail.com
show more ...
|
|
Revision tags: v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42 |
|
| #
3cb74db9 |
| 19-May-2020 |
Christian Hewitt <christianshewitt@gmail.com> |
arm64: dts: meson: convert ugoos-am6 to common w400 dtsi
Convert the Ugoos AM6 dts into meson-g12b-w400.dtsi, and then create
a new AM6 dts that references it. This is in preparation for
arm64: dts: meson: convert ugoos-am6 to common w400 dtsi
Convert the Ugoos AM6 dts into meson-g12b-w400.dtsi, and then create
a new AM6 dts that references it. This is in preparation for several
new G12B devices that will share the common w400 dtsi.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20200520014329.12469-2-christianshewitt@gmail.com
show more ...
|