ARM: socfpga: Fix crash with CONFIG_FORTIRY_SOURCE

When CONFIG_FORTIFY_SOURCE is set, memcpy() checks the potential
buffer overflow and panics. The code in sofcpga bootstrapping
contains the memcpy

ARM: socfpga: Fix crash with CONFIG_FORTIRY_SOURCE

When CONFIG_FORTIFY_SOURCE is set, memcpy() checks the potential
buffer overflow and panics. The code in sofcpga bootstrapping
contains the memcpy() calls are mistakenly translated as the shorter
size, hence it triggers a panic as if it were overflowing.

This patch changes the secondary_trampoline and *_end definitions
to arrays for avoiding the false-positive crash above.

Fixes: 9c4566a117a6 ("ARM: socfpga: Enable SMP for socfpga")
Suggested-by: Kees Cook <keescook@chromium.org>
Buglink: https://bugzilla.suse.com/show_bug.cgi?id=1192473
Link: https://lore.kernel.org/r/20211117193244.31162-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>

show more ...

ARM: socfpga: Fix crash with CONFIG_FORTIRY_SOURCE

[ Upstream commit 187bea472600dcc8d2eb714335053264dd437172 ]

When CONFIG_FORTIFY_SOURCE is set, memcpy() checks the potential
buffer overflow and

ARM: socfpga: Fix crash with CONFIG_FORTIRY_SOURCE

[ Upstream commit 187bea472600dcc8d2eb714335053264dd437172 ]

When CONFIG_FORTIFY_SOURCE is set, memcpy() checks the potential
buffer overflow and panics. The code in sofcpga bootstrapping
contains the memcpy() calls are mistakenly translated as the shorter
size, hence it triggers a panic as if it were overflowing.

This patch changes the secondary_trampoline and *_end definitions
to arrays for avoiding the false-positive crash above.

Fixes: 9c4566a117a6 ("ARM: socfpga: Enable SMP for socfpga")
Suggested-by: Kees Cook <keescook@chromium.org>
Buglink: https://bugzilla.suse.com/show_bug.cgi?id=1192473
Link: https://lore.kernel.org/r/20211117193244.31162-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of th

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details you
should have received a copy of the gnu general public license along
with this program if not write to the free software foundation inc
59 temple place suite 330 boston ma 02111 1307 usa

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 1334 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

ARM: socfpga: Clean unused functions

These functions are unused externally, removed them and declare
the one used locally as static.

Signed-off-by: Clément Péron <peron.clem@gmail.com>
Signed-off-b

ARM: socfpga: Clean unused functions

These functions are unused externally, removed them and declare
the one used locally as static.

Signed-off-by: Clément Péron <peron.clem@gmail.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>

show more ...

ARM: socfpga: Initialize Arria10 OCRAM ECC on startup

Initialize ECC for Arria10 On-Chip RAM on machine startup. The OCRAM
memory must be initialized before data is stored in memory otherwise the
EC

ARM: socfpga: Initialize Arria10 OCRAM ECC on startup

Initialize ECC for Arria10 On-Chip RAM on machine startup. The OCRAM
memory must be initialized before data is stored in memory otherwise the
ECC will fail on reads. The previous check-in

2364d423a7b3 ("ARM: socfpga: Enable Arria10 OCRAM ECC on startup")

added the OCRAM enable and initialization code but was not called on
startup.

Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1460394094-23326-1-git-send-email-tthayer@opensource.altera.com
Signed-off-by: Borislav Petkov <bp@suse.de>

show more ...

ARM: socfpga: Enable Arria10 L2 cache ECC on startup

Enable ECC for Arria10 L2 cache on machine startup. The ECC has to be
enabled before data is stored in memory otherwise the ECC will fail on
read

ARM: socfpga: Enable Arria10 L2 cache ECC on startup

Enable ECC for Arria10 L2 cache on machine startup. The ECC has to be
enabled before data is stored in memory otherwise the ECC will fail on
reads.

Use DT_MACHINE to select Arria10 L2 cache function.

Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: devicetree@vger.kernel.org
Cc: dinguyen@opensource.altera.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux@arm.linux.org.uk
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1458576106-24505-9-git-send-email-tthayer@opensource.altera.com
Signed-off-by: Borislav Petkov <bp@suse.de>

show more ...

ARM: socfpga: Enable OCRAM ECC on startup

Enable ECC for On-Chip RAM on machine startup. The ECC has to be enabled
before data is stored in memory otherwise the ECC will fail on reads.

Signed-off-b

ARM: socfpga: Enable OCRAM ECC on startup

Enable ECC for On-Chip RAM on machine startup. The ECC has to be enabled
before data is stored in memory otherwise the ECC will fail on reads.

Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: devicetree@vger.kernel.org
Cc: dougthompson@xmission.com
Cc: galak@codeaurora.org
Cc: grant.likely@linaro.org
Cc: ijc+devicetree@hellion.org.uk
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux@arm.linux.org.uk
Cc: linux-doc@vger.kernel.org
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: mark.rutland@arm.com
Cc: m.chehab@samsung.com
Cc: pawel.moll@arm.com
Cc: robh+dt@kernel.org
Cc: Russell King <linux@arm.linux.org.uk>
Cc: tthayer.linux@gmail.com
Cc: tthayer@opensource.altera.com
Link: http://lkml.kernel.org/r/1455132384-17108-4-git-send-email-tthayer@opensource.altera.com
Signed-off-by: Borislav Petkov <bp@suse.de>

show more ...

ARM: socfpga: Enable L2 cache ECC on startup

Enable ECC for L2 cache on machine startup. The ECC has to be enabled
before data is stored in memory otherwise the ECC will fail on reads.

Signed-off-b

ARM: socfpga: Enable L2 cache ECC on startup

Enable ECC for L2 cache on machine startup. The ECC has to be enabled
before data is stored in memory otherwise the ECC will fail on reads.

Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: devicetree@vger.kernel.org
Cc: galak@codeaurora.org
Cc: grant.likely@linaro.org
Cc: ijc+devicetree@hellion.org.uk
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux@arm.linux.org.uk
Cc: linux-doc@vger.kernel.org
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: mark.rutland@arm.com
Cc: m.chehab@samsung.com
Cc: pawel.moll@arm.com
Cc: robh+dt@kernel.org
Cc: Russell King <linux@arm.linux.org.uk>
Link: http://lkml.kernel.org/r/1455132384-17108-3-git-send-email-tthayer@opensource.altera.com
Signed-off-by: Borislav Petkov <bp@suse.de>

show more ...

ARM: socfpga: add reset for the Arria 10 platform

Since the Arria10's reset register offset is different from the Cyclone/Arria 5,
it's best to add a new DT_MACHINE_START() for the Arria10.

Signed-

ARM: socfpga: add reset for the Arria 10 platform

Since the Arria10's reset register offset is different from the Cyclone/Arria 5,
it's best to add a new DT_MACHINE_START() for the Arria10.

Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
---
v2: use altera_a10_dt_match for the A10 machine desc

show more ...

ARM: socfpga: support suspend to ram

Add code that requests that the sdr controller go into
self-refresh mode. This code is run from ocram.

Suspend-to-RAM and EDAC support are mutually exclusive o

ARM: socfpga: support suspend to ram

Add code that requests that the sdr controller go into
self-refresh mode. This code is run from ocram.

Suspend-to-RAM and EDAC support are mutually exclusive on
SOCFPGA. If the EDAC is enabled, it will prevent the
platform from going into suspend.

Example of how to request to suspend to ram:
$ echo enabled > \
/sys/devices/soc/ffc02000.serial0/tty/ttyS0/power/wakeup

$ echo -n mem > /sys/power/state

Signed-off-by: Alan Tull <atull@opensource.altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Signed-off-by: Kevin Hilman <khilman@linaro.org>

show more ...

ARM: socfpga: add CPU_METHOD_OF_DECLARE for Arria 10

Add boot_secondary implementation for the Arria10 platform. Bringing up
the secondary core on the Arria 10 platform is pretty similar to the
Cycl

ARM: socfpga: add CPU_METHOD_OF_DECLARE for Arria 10

Add boot_secondary implementation for the Arria10 platform. Bringing up
the secondary core on the Arria 10 platform is pretty similar to the
Cyclone/Arria 5 platform, with the exception of the following differences:

- Register offset to bringup CPU1 out of reset is different.
- The cpu1-start-addr for Arria10 contains an additional nibble.

Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Signed-off-by: Kevin Hilman <khilman@linaro.org>

show more ...

ARM: socfpga: use CPU_METHOD_OF_DECLARE for socfpga_cyclone5

Convert cyclone5/arria5 to use CPU_METHOD_OF_DECLARE for smp operations.

Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Sig

ARM: socfpga: use CPU_METHOD_OF_DECLARE for socfpga_cyclone5

Convert cyclone5/arria5 to use CPU_METHOD_OF_DECLARE for smp operations.

Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Signed-off-by: Kevin Hilman <khilman@linaro.org>

show more ...

ARM: v7 setup function should invalidate L1 cache

All ARMv5 and older CPUs invalidate their caches in the early assembly
setup function, prior to enabling the MMU. This is because the L1
cache shou

ARM: v7 setup function should invalidate L1 cache

All ARMv5 and older CPUs invalidate their caches in the early assembly
setup function, prior to enabling the MMU. This is because the L1
cache should not contain any data relevant to the execution of the
kernel at this point; all data should have been flushed out to memory.

This requirement should also be true for ARMv6 and ARMv7 CPUs - indeed,
these typically do not search their caches when caching is disabled (as
it needs to be when the MMU is disabled) so this change should be safe.

ARMv7 allows there to be CPUs which search their caches while caching is
disabled, and it's permitted that the cache is uninitialised at boot;
for these, the architecture reference manual requires that an
implementation specific code sequence is used immediately after reset
to ensure that the cache is placed into a sane state. Such
functionality is definitely outside the remit of the Linux kernel, and
must be done by the SoC's firmware before _any_ CPU gets to the Linux
kernel.

Changing the data cache clean+invalidate to a mere invalidate allows us
to get rid of a lot of platform specific hacks around this issue for
their secondary CPU bringup paths - some of which were buggy.

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Tested-by: Thierry Reding <treding@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Michal Simek <michal.simek@xilinx.com>
Tested-by: Wei Xu <xuwei5@hisilicon.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

show more ...

ARM: socfpga: use of_iomap to map the SCU

Use of_iomap to map the "arm,cortex-a9-scu". By doing this, we can remove
map_io in socfpga.c.

Also, we can remove socfpga_smp_init_cpus, as arm_dt_init_cp

ARM: socfpga: use of_iomap to map the SCU

Use of_iomap to map the "arm,cortex-a9-scu". By doing this, we can remove
map_io in socfpga.c.

Also, we can remove socfpga_smp_init_cpus, as arm_dt_init_cpu_maps is
already doing the CPU mapping.

Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>

show more ...

ARM: socfpga: Correct SCU virtual mapping in socfpga

Correct SCU virtual mapping that was causing this BUG message:

"BUG: mapping for 0xfffec000 at 0xfffec000 out of vmalloc space"

Signed-off-by:

ARM: socfpga: Correct SCU virtual mapping in socfpga

Correct SCU virtual mapping that was causing this BUG message:

"BUG: mapping for 0xfffec000 at 0xfffec000 out of vmalloc space"

Signed-off-by: Vince Bridgers <vbridger@opensource.altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>

show more ...

socfpga: hotplug: put cpu1 in wfi

Use WFI when putting CPU1 to sleep. Don't hold CPU1 in reset
since that results in increased power consumption.

Reset CPU1 briefly during CPU1 bootup.

This has b

socfpga: hotplug: put cpu1 in wfi

Use WFI when putting CPU1 to sleep. Don't hold CPU1 in reset
since that results in increased power consumption.

Reset CPU1 briefly during CPU1 bootup.

This has been tested for hotplug and suspend/resume and results
in no increased power consumption.

Signed-off-by: Alan Tull <atull@opensource.altera.com>
Acked-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

arm: socfpga: fix fetching cpu1start_addr for SMP

When CPU1 is brought out of reset, it's MMU is not turned on yet, so it will
only be able to use physical addresses. For systems with that have the

arm: socfpga: fix fetching cpu1start_addr for SMP

When CPU1 is brought out of reset, it's MMU is not turned on yet, so it will
only be able to use physical addresses. For systems with that have the
MMU page configured for 0xC0000000, 0x80000000, or 0x40000000
"BIC 0x40000000" will work just fine, as it was just converting the
virtual address of &cpu1start_addr into a physical address, ie. 0xC0000000
became 0x80000000. So for systems where the SDRAM controller was able to do a
wrap-around access, this was working fine, as it was just dropping the MSB,
but for systems where out of bounds memory access is not allowed, this would
not allow CPU1 to correctly fetch &cpu1start_addr.

This patch fixes the secondary_trampoline code to correctly fetch the
physical address of cpu1start_addr directly. The patch will subtract the
correct PAGE_OFFSET from &cpu1start_addr. And since on this platform, the
physical memory will always start at 0x0, subtracting PAGE_OFFSET from
&cpu1start_addr will allow CPU1 to correctly fetch the value of cpu1start_addr.

While at it, change the name of cpu1start_addr to socfpga_cpu1start_addr
to avoid any future naming collisions for multiplatform image.

Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
---
v4: Updated commit log to correctly lay out the usage of PAGE_OFFSET and
add comments to the same effect.
v3: Used PAGE_OFFSET to get the physical address
v2: Correctly get the physical address instead of just a BIC hack.

show more ...

ARM: socfpga: Enable soft reset

Enable a cold or warm reset to the HW from userspace.

Also fix a few sparse errors:

warning: symbol 'sys_manager_base_addr' was not declared. Should it be static?
w

ARM: socfpga: Enable soft reset

Enable a cold or warm reset to the HW from userspace.

Also fix a few sparse errors:

warning: symbol 'sys_manager_base_addr' was not declared. Should it be static?
warning: symbol 'rst_manager_base_addr' was not declared. Should it be static?

Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Reviewed-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Olof Johansson <olof@lixom.net>

show more ...

arm: socfpga: Add SMP support for actual socfpga harware

Because the CPU1 start address is different for socfpga-vt and
socfpga-cyclone5, we add code to use the correct CPU1 start addr.

Signed-off-

arm: socfpga: Add SMP support for actual socfpga harware

Because the CPU1 start address is different for socfpga-vt and
socfpga-cyclone5, we add code to use the correct CPU1 start addr.

Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Signed-off-by: Pavel Machek <pavel@denx.de>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Olof Johansson <olof@lixom.net>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Olof Johansson <olof@lixom.net>

show more ...

ARM: socfpga: Enable SMP for socfpga

Enable SMP for the SOCFPGA platform.

Signed-off-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Reviewed-by: Rob Herring <rob.

ARM: socfpga: Enable SMP for socfpga

Enable SMP for the SOCFPGA platform.

Signed-off-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Reviewed-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it u

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details you
should have received a copy of the gnu general public license along
with this program if not write to the free software foundation inc
59 temple place suite 330 boston ma 02111 1307 usa

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 1334 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

ARM: socfpga: Clean unused functions

These functions are unused externally, removed them and declare
the one used locally as static.

Signed-off-by: Clément Péron <peron.clem@gma

ARM: socfpga: Clean unused functions

These functions are unused externally, removed them and declare
the one used locally as static.

Signed-off-by: Clément Péron <peron.clem@gmail.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>

show more ...

ARM: socfpga: Initialize Arria10 OCRAM ECC on startup

Initialize ECC for Arria10 On-Chip RAM on machine startup. The OCRAM
memory must be initialized before data is stored in memory othe

ARM: socfpga: Initialize Arria10 OCRAM ECC on startup

Initialize ECC for Arria10 On-Chip RAM on machine startup. The OCRAM
memory must be initialized before data is stored in memory otherwise the
ECC will fail on reads. The previous check-in

2364d423a7b3 ("ARM: socfpga: Enable Arria10 OCRAM ECC on startup")

added the OCRAM enable and initialization code but was not called on
startup.

Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1460394094-23326-1-git-send-email-tthayer@opensource.altera.com
Signed-off-by: Borislav Petkov <bp@suse.de>

show more ...

ARM: socfpga: Enable Arria10 L2 cache ECC on startup

Enable ECC for Arria10 L2 cache on machine startup. The ECC has to be
enabled before data is stored in memory otherwise the ECC will

ARM: socfpga: Enable Arria10 L2 cache ECC on startup

Enable ECC for Arria10 L2 cache on machine startup. The ECC has to be
enabled before data is stored in memory otherwise the ECC will fail on
reads.

Use DT_MACHINE to select Arria10 L2 cache function.

Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: devicetree@vger.kernel.org
Cc: dinguyen@opensource.altera.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux@arm.linux.org.uk
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1458576106-24505-9-git-send-email-tthayer@opensource.altera.com
Signed-off-by: Borislav Petkov <bp@suse.de>

show more ...

ARM: socfpga: Enable OCRAM ECC on startup

Enable ECC for On-Chip RAM on machine startup. The ECC has to be enabled
before data is stored in memory otherwise the ECC will fail on reads.

ARM: socfpga: Enable OCRAM ECC on startup

Enable ECC for On-Chip RAM on machine startup. The ECC has to be enabled
before data is stored in memory otherwise the ECC will fail on reads.

Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: devicetree@vger.kernel.org
Cc: dougthompson@xmission.com
Cc: galak@codeaurora.org
Cc: grant.likely@linaro.org
Cc: ijc+devicetree@hellion.org.uk
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux@arm.linux.org.uk
Cc: linux-doc@vger.kernel.org
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: mark.rutland@arm.com
Cc: m.chehab@samsung.com
Cc: pawel.moll@arm.com
Cc: robh+dt@kernel.org
Cc: Russell King <linux@arm.linux.org.uk>
Cc: tthayer.linux@gmail.com
Cc: tthayer@opensource.altera.com
Link: http://lkml.kernel.org/r/1455132384-17108-4-git-send-email-tthayer@opensource.altera.com
Signed-off-by: Borislav Petkov <bp@suse.de>

show more ...