ARM: omap2: make functions static

A number of functions are only called from the file they
are defined in, so remove the extern declarations and
make them local to those files.

Acked-by: Tony Lindg

ARM: omap2: make functions static

A number of functions are only called from the file they
are defined in, so remove the extern declarations and
make them local to those files.

Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500

Based on 2 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of th

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500

Based on 2 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation #

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-only

has been chosen to replace the boilerplate/reference in 4122 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

ARM: OMAP2+: PRM: move SoC specific init calls within a generic API

This gets rid of need for some exported driver APIs, and simplifies the
initialization of the PRM driver. Done in preparation to m

ARM: OMAP2+: PRM: move SoC specific init calls within a generic API

This gets rid of need for some exported driver APIs, and simplifies the
initialization of the PRM driver. Done in preparation to make PRM a
separate driver. The init data is now also passed to the SoC specific
implementations, allowing future expansion to add feature flags etc.

Signed-off-by: Tero Kristo <t-kristo@ti.com>

show more ...

ARM: OMAP3+: PRM: add common APIs for prm_vp_check/clear_txdone

PRM driver now only exports a generic API for clearing / checking
VP txdone status.

Signed-off-by: Tero Kristo <t-kristo@ti.com>

ARM: OMAP2+: PRM: add generic API for clear_mod_irqs

OMAP2/3 now use generic API for the prm_clear_mod_irqs, the SoC specific
implementation details are provided through prm_ll_data.

Signed-off-by:

ARM: OMAP2+: PRM: add generic API for clear_mod_irqs

OMAP2/3 now use generic API for the prm_clear_mod_irqs, the SoC specific
implementation details are provided through prm_ll_data.

Signed-off-by: Tero Kristo <t-kristo@ti.com>

show more ...

ARM: OMAP3: PRM: invert the wkst_mask for the prm_clear_mod_irqs

This makes the API the same as used with OMAP2, and makes it possible
to implement a generic driver API for the functionality.

Signe

ARM: OMAP3: PRM: invert the wkst_mask for the prm_clear_mod_irqs

This makes the API the same as used with OMAP2, and makes it possible
to implement a generic driver API for the functionality.

Signed-off-by: Tero Kristo <t-kristo@ti.com>

show more ...

ARM: OMAP3+: PRM: remove prm_get_reset_sources declaration from headers

There is no implementation for this anywhere, so remove it from the header
files also.

Signed-off-by: Tero Kristo <t-kristo@t

ARM: OMAP3+: PRM: remove prm_get_reset_sources declaration from headers

There is no implementation for this anywhere, so remove it from the header
files also.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
[tony@atomide.com: updated to apply]
Signed-off-by: Tony Lindgren <tony@atomide.com>

show more ...

ARM: OMAP2+: PRM: provide generic API for system reset

This patch combines the various prm_warm_reset calls under a common
API prm_reset_system, and adds the SoC specific implementation under
prm_ll

ARM: OMAP2+: PRM: provide generic API for system reset

This patch combines the various prm_warm_reset calls under a common
API prm_reset_system, and adds the SoC specific implementation under
prm_ll_data.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Acked-by: Paul Walmsley <paul@pwsan.com>
Tested-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

show more ...

ARM: OMAP3+: PRM: add generic API for reconfiguring I/O chain

This adds a generic API for reconfiguring the I/O chain. The implementation
will call the SoC specific function registered during init t

ARM: OMAP3+: PRM: add generic API for reconfiguring I/O chain

This adds a generic API for reconfiguring the I/O chain. The implementation
will call the SoC specific function registered during init time. The SoC
specific reconfigure functions are also made static, as they don't need
to be accessed outside the PRM driver itself.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Acked-by: Paul Walmsley <paul@pwsan.com>
Tested-by: Nishanth Menon <nm@ti.com>
[tony@atomide.com: updated for recent omap3 prcm fixes]
Signed-off-by: Tony Lindgren <tony@atomide.com>

show more ...

ARM: OMAP3: PRM: make PRCM interrupt handler related functions static

These are not needed outside the PRM driver, so make them static and
remove the prototypes from the public header.

Signed-off-b

ARM: OMAP3: PRM: make PRCM interrupt handler related functions static

These are not needed outside the PRM driver, so make them static and
remove the prototypes from the public header.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Acked-by: Paul Walmsley <paul@pwsan.com>
Tested-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

show more ...

ARM: OMAP3: PRM: move PRM init code from PM core to the driver

Helps to isolate the PRM driver.

Signed-off-by: Tero Kristo <t-kristo@ti.com>

ARM: OMAP3: PRM: add API for saving PRM scratchpad contents

This isolates the PRM register access within the PRM driver.

Signed-off-by: Tero Kristo <t-kristo@ti.com>

ARM: OMAP3: PRM: add API for checking and clearing cold reset status

This isolates the PRM register access within the PRM driver.

Signed-off-by: Tero Kristo <t-kristo@ti.com>

ARM: OMAP3: PRM: move modem reset to PRM driver

This is a more proper isolation of the code. Done in preparation of making
PRM an individual driver.

Signed-off-by: Tero Kristo <t-kristo@ti.com>

ARM: OMAP3: PRM: move iva reset to PRM driver

This is a more proper isolation of the code. Done in preparation of making
PRM an individual driver.

Signed-off-by: Tero Kristo <t-kristo@ti.com>

ARM: OMAP3: PRM: move prcm wakeup helper to prm driver

Done in preparation to make the prm an individual driver.

Signed-off-by: Tero Kristo <t-kristo@ti.com>

ARM: OMAP2+: raw read and write endian fix

All OMAP IP blocks expect LE data, but CPU may operate in BE mode.
Need to use endian neutral functions to read/write h/w registers.
I.e instead of __raw_r

ARM: OMAP2+: raw read and write endian fix

All OMAP IP blocks expect LE data, but CPU may operate in BE mode.
Need to use endian neutral functions to read/write h/w registers.
I.e instead of __raw_read[lw] and __raw_write[lw] functions code
need to use read[lw]_relaxed and write[lw]_relaxed functions.
If the first simply reads/writes register, the second will byteswap
it if host operates in BE mode.

Changes are trivial sed like replacement of __raw_xxx functions
with xxx_relaxed variant.

Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>

show more ...

ARM: OMAP: Move DT wake-up event handling over to use pinctrl-single-omap

Now pinctrl-single-omap can handle the wake-up events for us now
as long as the events are configured in the .dts files.

Do

ARM: OMAP: Move DT wake-up event handling over to use pinctrl-single-omap

Now pinctrl-single-omap can handle the wake-up events for us now
as long as the events are configured in the .dts files.

Done in collaboration with Roger Quadros <rogerq@ti.com>.

Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Prakash Manjunathappa <prakash.pm@ti.com>
Cc: Roger Quadros <rogerq@ti.com>
Cc: Haojian Zhuang <haojian.zhuang@linaro.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Kevin Hilman <khilman@linaro.org>
Tested-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

show more ...

ARM: OMAP2+: PRM: initialize some PRM functions early

Some PRM functions will need to be called by the hwmod code early in
kernel init. To handle this, split the PRM initialization code into
early

ARM: OMAP2+: PRM: initialize some PRM functions early

Some PRM functions will need to be called by the hwmod code early in
kernel init. To handle this, split the PRM initialization code into
early and late phases. The early init is handled via mach-omap2/io.c,
while the late init is handled by subsys_initcall().

Signed-off-by: Paul Walmsley <paul@pwsan.com>

show more ...

ARM: OMAP2/3: PRM: add SoC reset functions (using the CORE DPLL method)

Add SoC reset functions into the PRM code. These functions are based
on code from mach-omap2/prcm.c. They reset the SoC usin

ARM: OMAP2/3: PRM: add SoC reset functions (using the CORE DPLL method)

Add SoC reset functions into the PRM code. These functions are based
on code from mach-omap2/prcm.c. They reset the SoC using the CORE DPLL
reset method (as opposed to one of the other two or three chip reset
methods).

Adding them here will facilitate their removal from
arch/arm/mach-omap2/prcm.c. (prcm.c is deprecated.)

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Tested-by: Vaibhav Hiremath <hvaibhav@ti.com>

show more ...

ARM: OMAP2+: PRM: create PRM reset source API for the watchdog timer driver

The OMAP watchdog timer driver needs to determine what caused the SoC
to reset for its GETBOOTSTATUS ioctl. So, define a

ARM: OMAP2+: PRM: create PRM reset source API for the watchdog timer driver

The OMAP watchdog timer driver needs to determine what caused the SoC
to reset for its GETBOOTSTATUS ioctl. So, define a set of standard
reset sources across OMAP SoCs. For OMAP2xxx, 3xxx, and 4xxx SoCs,
define mappings from the SoC-specific reset source register bits to
the standardized reset source IDs. Create SoC-specific PRM functions
that read the appropriate per-SoC register and use the mapping to
return the standardized reset bits. Register the SoC-specific PRM
functions with the common PRM code via prm_register(). Create a
function in the common PRM code, prm_read_reset_sources(), that
calls the SoC-specific function, registered during boot.

This patch does not yet handle some SoCs, such as AM33xx. Those SoCs
were not handled by the code this will replace.

Signed-off-by: Paul Walmsley <paul@pwsan.com>

show more ...

ARM: OMAP2+: PRM: split PRM functions into OMAP2, OMAP3-specific files

Move OMAP3xxx-specific PRM functions & macros into prm3xxx.[ch] and
OMAP2xxx-specific macros into prm2xxx.h. (prm2xxx.c will b

ARM: OMAP2+: PRM: split PRM functions into OMAP2, OMAP3-specific files

Move OMAP3xxx-specific PRM functions & macros into prm3xxx.[ch] and
OMAP2xxx-specific macros into prm2xxx.h. (prm2xxx.c will be created
by a subsequent patch when it's needed.) Move basic PRM register
access functions into static inline functions in prm2xxx_3xxx.h, leaving
only OMAP2/3 hardreset functions in prm2xxx_3xxx.c.

Also clarify the initcall function naming to reinforce that this code
is specifically for the PRM IP block.

This is in preparation for the upcoming powerdomain series and the
upcoming move of this code to drivers/.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Reviewed-by: Russ Dill <Russ.Dill@ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>

show more ...

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500

Based on 2 normalized pattern(s):

this program is free software you can redistribute it and or modify
it u

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500

Based on 2 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation #

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-only

has been chosen to replace the boilerplate/reference in 4122 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

ARM: OMAP2+: PRM: move SoC specific init calls within a generic API

This gets rid of need for some exported driver APIs, and simplifies the
initialization of the PRM driver. Done in prep

ARM: OMAP2+: PRM: move SoC specific init calls within a generic API

This gets rid of need for some exported driver APIs, and simplifies the
initialization of the PRM driver. Done in preparation to make PRM a
separate driver. The init data is now also passed to the SoC specific
implementations, allowing future expansion to add feature flags etc.

Signed-off-by: Tero Kristo <t-kristo@ti.com>

show more ...

ARM: OMAP3+: PRM: add common APIs for prm_vp_check/clear_txdone

PRM driver now only exports a generic API for clearing / checking
VP txdone status.

Signed-off-by: Tero Kristo <t

ARM: OMAP3+: PRM: add common APIs for prm_vp_check/clear_txdone

PRM driver now only exports a generic API for clearing / checking
VP txdone status.

Signed-off-by: Tero Kristo <t-kristo@ti.com>

show more ...