Davinci: gpio - controller type support

This patch allows for gpio controllers that deviate from those found on
traditional davinci socs. davinci_soc_info has an added field to indicate the
soc-spe

Davinci: gpio - controller type support

This patch allows for gpio controllers that deviate from those found on
traditional davinci socs. davinci_soc_info has an added field to indicate the
soc-specific gpio controller type. The gpio initialization code then bails
out if necessary.

More elements (tnetv107x) to be added later into enum davinci_gpio_type.

Signed-off-by: Cyril Chemparathy <cyril@ti.com>
Tested-by: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

show more ...

davinci: clkdev cleanup: remove clk_lookup wrapper, use clkdev_add_table()

Remove unneeded 'struct davinci_clk' wrapper around 'struct clk_lookup'
and use clkdev_add_table() to add the list of clock

davinci: clkdev cleanup: remove clk_lookup wrapper, use clkdev_add_table()

Remove unneeded 'struct davinci_clk' wrapper around 'struct clk_lookup'
and use clkdev_add_table() to add the list of clocks in one go.

Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

show more ...

davinci: da8xx/omapl1: add support for the second sysconfig module

OMAP-L138 adds a second SYSCFG region having useful functionality
like deep sleep, pull up/down control and SATA clock stop.

This

davinci: da8xx/omapl1: add support for the second sysconfig module

OMAP-L138 adds a second SYSCFG region having useful functionality
like deep sleep, pull up/down control and SATA clock stop.

This patch makes provision for accessing registers from second
SYSCFG region in da8xx code.

Note that OMAP-L137 has a single SYSCFG region.

Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

show more ...

DaVinci: remove unneeded #include's

There have accumulated quite a lot of them after the code reorganizations...

In several cases I had to replace #include <linux/dma-mapping.h> which wasn't
needed

DaVinci: remove unneeded #include's

There have accumulated quite a lot of them after the code reorganizations...

In several cases I had to replace #include <linux/dma-mapping.h> which wasn't
needed directly but happened to #include <linux/err.h> which was needed.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

show more ...

davinci: DA8xx: rename 'psc_ctlr' field into 'gpsc'

Replace badly chosen 'psc_ctlr' name of the 'struct clk' field (PSC already
means "Power and Sleep Controller", so the '_ctlr' postfix makes the n

davinci: DA8xx: rename 'psc_ctlr' field into 'gpsc'

Replace badly chosen 'psc_ctlr' name of the 'struct clk' field (PSC already
means "Power and Sleep Controller", so the '_ctlr' postfix makes the name
tautological) with technically correct 'gpsc' (Global PSC -- which contains
all the module registers).

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

show more ...

davinci: da830: add support for new silicon revisions

Newer revs of da830 silicon have different 'variant' field of the JTAG
id register. Current code only supports rev 1.0 silicon.

This patch add

davinci: da830: add support for new silicon revisions

Newer revs of da830 silicon have different 'variant' field of the JTAG
id register. Current code only supports rev 1.0 silicon.

This patch adds support for rev1.1 and rev2.0 silicon and updates
the 'name' strings to add a '-' between 'omap' & 'l137' to have
consistent naming with da850/omap-l138.

From Mark Grosen <mgrosen@ti.com>:

"There are currently three silicon revisions for OMAPL137. The JTAG IDs
(DEVIDR register contents) for each silicon revision are shown below:

0x0B7D F02F for silicon revision 1.0
0x8B7D F02F for silicon revision 1.1
0x9B7D F02F for silicon revision 2.0

Corresponding errata documentation will be available in the next few
weeks on the ti.com website."

Reported-by: Nick Thompson <Nick.Thompson@gefanuc.com>
Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

show more ...

davinci: Add LCD Graphics support for DA830/OMAP-L137 EVM

Add graphics support for the Sharp LCD035Q3DG01 graphical
LCD that's on the User Interface (UI) daughter card of the
DA830/OMAP-L137 EVM.

T

davinci: Add LCD Graphics support for DA830/OMAP-L137 EVM

Add graphics support for the Sharp LCD035Q3DG01 graphical
LCD that's on the User Interface (UI) daughter card of the
DA830/OMAP-L137 EVM.

The LCD shares EMIFA lines with the NAND and NOR devices that
are also on the UI card so those lines are shared via a couple
of muxes. The muxes are controlled by the 'MUX_MODE' line on
the UI card. The 'MUX_MODE' line is controlled by pin P6 of
a pcf8574 i2c expander that's at i2c address 0x3f on UI card.
The i2c expander is controlled using the gpio infrastructure
from the board code using the 'setup()' and 'teardown()'
routines.

Signed-off-by: Steve Chen <schen@mvista.com>
Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

show more ...

davinci: DA8XX/OMAP-L1XX: JTAG ID register should offset from SYSCFG base

This makes it clear that JTAG ID register is part of the
SYSCFG module

Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-o

davinci: DA8XX/OMAP-L1XX: JTAG ID register should offset from SYSCFG base

This makes it clear that JTAG ID register is part of the
SYSCFG module

Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

show more ...

davinci: DA8XX/OMAP-L1XX: Avoid use of IO_ADDRESS for SYSCFG module

Avoid use of IO_ADDRESS() for SYSCFG module by doing an ioremap() instead.

Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off

davinci: DA8XX/OMAP-L1XX: Avoid use of IO_ADDRESS for SYSCFG module

Avoid use of IO_ADDRESS() for SYSCFG module by doing an ioremap() instead.

Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

show more ...

davinci: DA8XX/OMAP-L1XX: It's SYSCFG not BOOT_CFG

Rename the DA8XX_BOOT_CFG_BASE macro to get it in line
with the public documentation for these parts.

Signed-off-by: Sekhar Nori <nsekhar@ti.com>

davinci: DA8XX/OMAP-L1XX: It's SYSCFG not BOOT_CFG

Rename the DA8XX_BOOT_CFG_BASE macro to get it in line
with the public documentation for these parts.

Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

show more ...

davinci: Audio support for DA830 EVM

Define resources for McASP1 used on DA830/OMAP-L137 EVM, add platform
device defintion, initialization function. Additionally, this patch
also adds version and

davinci: Audio support for DA830 EVM

Define resources for McASP1 used on DA830/OMAP-L137 EVM, add platform
device defintion, initialization function. Additionally, this patch
also adds version and FIFO related members to platform data structure.

Signed-off-by: Chaithrika U S <chaithrika@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

show more ...

davinci: Rearrange the da830/omap-l137 macros and functions

Rearrange the PINMUX macros and pinmux_setup function which
are common between da830/omap-l137 and da850/omap-l138.

Also, replace the da8

davinci: Rearrange the da830/omap-l137 macros and functions

Rearrange the PINMUX macros and pinmux_setup function which
are common between da830/omap-l137 and da850/omap-l138.

Also, replace the da830 string in function names to da8xx.

Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

show more ...

davinci: Move the da830/omap-l137 #defines to header file

With the introduction of TI da850/omap-l138, some of the macros
defined for da830/omap-l137 will be needed in da850 source file.
So, move th

davinci: Move the da830/omap-l137 #defines to header file

With the introduction of TI da850/omap-l138, some of the macros
defined for da830/omap-l137 will be needed in da850 source file.
So, move the common macros to da8xx.h header file.

Also, modify the macro names from DA830_... to DA8XX_.

Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

show more ...

davinci: da8xx: Add base DA830/OMAP-L137 SoC support

The da830/omap l137 is a new SoC from TI that is similar
to the davinci line. Since its so similar to davinci,
put the support for the da830 in

davinci: da8xx: Add base DA830/OMAP-L137 SoC support

The da830/omap l137 is a new SoC from TI that is similar
to the davinci line. Since its so similar to davinci,
put the support for the da830 in the same directory as
the davinci code.

There are differences, however. Some of those differences
prevent support for davinci and da830 platforms to work
in the same kernel binary. Those differences are:

1) Different physical address for RAM. This is relevant
to Makefile.boot addresses and PHYS_OFFSET. The
Makefile.boot issue isn't truly a kernel issue but
it means u-boot won't work with a uImage including
both architectures. The PHYS_OFFSET issue is
addressed by the "Allow for runtime-determined
PHYS_OFFSET" patch by Lennert Buytenhek but it
hasn't been accepted yet.

2) Different uart addresses. This is only an issue
for the 'addruart' assembly macro when CONFIG_DEBUG_LL
is enabled. Since the code in that macro is called
so early (e.g., by _error_p in kernel/head.S when
the processor lookup fails), we can't determine what
platform the kernel is running on at runtime to use
the correct uart address.

These areas have compile errors intentionally inserted
to indicate to the builder they're doing something wrong.

A new config variable, CONFIG_ARCH_DAVINCI_DMx, is added
to distinguish between a true davinci architecture and
the da830 architecture.

Note that the da830 currently has an issue with writeback
data cache so CONFIG_CPU_DCACHE_WRITETHROUGH should be
enabled when building a da830 kernel.

Additional generalizations for future SoCs in the da8xx family done by
Sudhakar Rajashekhara and Sekhar Nori.

Signed-off-by: Steve Chen <schen@mvista.com>
Signed-off-by: Mikhail Cherkashin <mcherkashin@ru.mvista.com>
Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Cc: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

show more ...

ARM: davinci: da830: switch to using the clocksource driver

We now have a proper clocksource driver for davinci. Switch the da830
platform to using it.

Signed-off-by: Bartosz Go

ARM: davinci: da830: switch to using the clocksource driver

We now have a proper clocksource driver for davinci. Switch the da830
platform to using it.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

show more ...

ARM: davinci: WARN_ON() if clk_get() fails

Currently the timer code checks if the clock pointer passed to it is
good (!IS_ERR(clk)). The new clocksource driver expects the clock to
b

ARM: davinci: WARN_ON() if clk_get() fails

Currently the timer code checks if the clock pointer passed to it is
good (!IS_ERR(clk)). The new clocksource driver expects the clock to
be functional and doesn't perform any checks so emit a warning if
clk_get() fails. Apply this to all davinci platforms.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

show more ...

clk: Remove io.h from clk-provider.h

Now that we've gotten rid of clk_readl() we can remove io.h from the
clk-provider header and push out the io.h include to any code that isn't
alr

clk: Remove io.h from clk-provider.h

Now that we've gotten rid of clk_readl() we can remove io.h from the
clk-provider header and push out the io.h include to any code that isn't
already including the io.h header but using things like readl/writel,
etc.

Found with this grep:

git grep -l clk-provider.h | grep '.c$' | xargs git grep -L 'linux/io.h' | \
xargs git grep -l \
-e '\<__iowrite32_copy\>' --or \
-e '\<__ioread32_copy\>' --or \
-e '\<__iowrite64_copy\>' --or \
-e '\<ioremap_page_range\>' --or \
-e '\<ioremap_huge_init\>' --or \
-e '\<arch_ioremap_pud_supported\>' --or \
-e '\<arch_ioremap_pmd_supported\>' --or \
-e '\<devm_ioport_map\>' --or \
-e '\<devm_ioport_unmap\>' --or \
-e '\<IOMEM_ERR_PTR\>' --or \
-e '\<devm_ioremap\>' --or \
-e '\<devm_ioremap_nocache\>' --or \
-e '\<devm_ioremap_wc\>' --or \
-e '\<devm_iounmap\>' --or \
-e '\<devm_ioremap_release\>' --or \
-e '\<devm_memremap\>' --or \
-e '\<devm_memunmap\>' --or \
-e '\<__devm_memremap_pages\>' --or \
-e '\<pci_remap_cfgspace\>' --or \
-e '\<arch_has_dev_port\>' --or \
-e '\<arch_phys_wc_add\>' --or \
-e '\<arch_phys_wc_del\>' --or \
-e '\<memremap\>' --or \
-e '\<memunmap\>' --or \
-e '\<arch_io_reserve_memtype_wc\>' --or \
-e '\<arch_io_free_memtype_wc\>' --or \
-e '\<__io_aw\>' --or \
-e '\<__io_pbw\>' --or \
-e '\<__io_paw\>' --or \
-e '\<__io_pbr\>' --or \
-e '\<__io_par\>' --or \
-e '\<__raw_readb\>' --or \
-e '\<__raw_readw\>' --or \
-e '\<__raw_readl\>' --or \
-e '\<__raw_readq\>' --or \
-e '\<__raw_writeb\>' --or \
-e '\<__raw_writew\>' --or \
-e '\<__raw_writel\>' --or \
-e '\<__raw_writeq\>' --or \
-e '\<readb\>' --or \
-e '\<readw\>' --or \
-e '\<readl\>' --or \
-e '\<readq\>' --or \
-e '\<writeb\>' --or \
-e '\<writew\>' --or \
-e '\<writel\>' --or \
-e '\<writeq\>' --or \
-e '\<readb_relaxed\>' --or \
-e '\<readw_relaxed\>' --or \
-e '\<readl_relaxed\>' --or \
-e '\<readq_relaxed\>' --or \
-e '\<writeb_relaxed\>' --or \
-e '\<writew_relaxed\>' --or \
-e '\<writel_relaxed\>' --or \
-e '\<writeq_relaxed\>' --or \
-e '\<readsb\>' --or \
-e '\<readsw\>' --or \
-e '\<readsl\>' --or \
-e '\<readsq\>' --or \
-e '\<writesb\>' --or \
-e '\<writesw\>' --or \
-e '\<writesl\>' --or \
-e '\<writesq\>' --or \
-e '\<inb\>' --or \
-e '\<inw\>' --or \
-e '\<inl\>' --or \
-e '\<outb\>' --or \
-e '\<outw\>' --or \
-e '\<outl\>' --or \
-e '\<inb_p\>' --or \
-e '\<inw_p\>' --or \
-e '\<inl_p\>' --or \
-e '\<outb_p\>' --or \
-e '\<outw_p\>' --or \
-e '\<outl_p\>' --or \
-e '\<insb\>' --or \
-e '\<insw\>' --or \
-e '\<insl\>' --or \
-e '\<outsb\>' --or \
-e '\<outsw\>' --or \
-e '\<outsl\>' --or \
-e '\<insb_p\>' --or \
-e '\<insw_p\>' --or \
-e '\<insl_p\>' --or \
-e '\<outsb_p\>' --or \
-e '\<outsw_p\>' --or \
-e '\<outsl_p\>' --or \
-e '\<ioread8\>' --or \
-e '\<ioread16\>' --or \
-e '\<ioread32\>' --or \
-e '\<ioread64\>' --or \
-e '\<iowrite8\>' --or \
-e '\<iowrite16\>' --or \
-e '\<iowrite32\>' --or \
-e '\<iowrite64\>' --or \
-e '\<ioread16be\>' --or \
-e '\<ioread32be\>' --or \
-e '\<ioread64be\>' --or \
-e '\<iowrite16be\>' --or \
-e '\<iowrite32be\>' --or \
-e '\<iowrite64be\>' --or \
-e '\<ioread8_rep\>' --or \
-e '\<ioread16_rep\>' --or \
-e '\<ioread32_rep\>' --or \
-e '\<ioread64_rep\>' --or \
-e '\<iowrite8_rep\>' --or \
-e '\<iowrite16_rep\>' --or \
-e '\<iowrite32_rep\>' --or \
-e '\<iowrite64_rep\>' --or \
-e '\<__io_virt\>' --or \
-e '\<pci_iounmap\>' --or \
-e '\<virt_to_phys\>' --or \
-e '\<phys_to_virt\>' --or \
-e '\<ioremap_uc\>' --or \
-e '\<ioremap\>' --or \
-e '\<__ioremap\>' --or \
-e '\<iounmap\>' --or \
-e '\<ioremap\>' --or \
-e '\<ioremap_nocache\>' --or \
-e '\<ioremap_uc\>' --or \
-e '\<ioremap_wc\>' --or \
-e '\<ioremap_wc\>' --or \
-e '\<ioremap_wt\>' --or \
-e '\<ioport_map\>' --or \
-e '\<ioport_unmap\>' --or \
-e '\<ioport_map\>' --or \
-e '\<ioport_unmap\>' --or \
-e '\<xlate_dev_kmem_ptr\>' --or \
-e '\<xlate_dev_mem_ptr\>' --or \
-e '\<unxlate_dev_mem_ptr\>' --or \
-e '\<virt_to_bus\>' --or \
-e '\<bus_to_virt\>' --or \
-e '\<memset_io\>' --or \
-e '\<memcpy_fromio\>' --or \
-e '\<memcpy_toio\>'

I also reordered a couple includes when they weren't alphabetical and
removed clk.h from kona, replacing it with clk-provider.h because
that driver doesn't use clk consumer APIs.

Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Acked-by: Tero Kristo <t-kristo@ti.com>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Cc: Chris Zankel <chris@zankel.net>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Acked-by: John Crispin <john@phrozen.org>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

show more ...

ARM: davinci: remove intc related fields from davinci_soc_info

The fields related to the two davinci interrupt controllers are no
longer used. Remove them.

Reviewed-by: David Le

ARM: davinci: remove intc related fields from davinci_soc_info

The fields related to the two davinci interrupt controllers are no
longer used. Remove them.

Reviewed-by: David Lechner <david@lechnology.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

show more ...

ARM: davinci: cp-intc: use the new-style config structure

Modify the cp-intc driver to take all its configuration from the new
config structure. Stop referencing davinci_soc_info in any

ARM: davinci: cp-intc: use the new-style config structure

Modify the cp-intc driver to take all its configuration from the new
config structure. Stop referencing davinci_soc_info in any way.
Move the declaration for davinci_cp_intc_init() to
irq-davinci-cp-intc.h and make it take the new config structure as
parameter. Convert all users to the new version.

Also: since the two da8xx SoCs default all irq priorities to 7, just
drop the priority configuration at all and hardcode the channels to 7.

It will simplify the driver code and make our lives easier when it
comes to device-tree support.

Reviewed-by: David Lechner <david@lechnology.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

show more ...

ARM: davinci: cp-intc: use a common prefix for all symbols

In preparation for moving the driver to drivers/irqchip do some
cleanup: use a common prefix for all symbols.

Signed-o

ARM: davinci: cp-intc: use a common prefix for all symbols

In preparation for moving the driver to drivers/irqchip do some
cleanup: use a common prefix for all symbols.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

show more ...

ARM: davinci: cp-intc: add the new config structures for da8xx SoCs

Add the new-style config structures for da8xx SoCs. They will be used
once we make the cp-intc driver stop using davin

ARM: davinci: cp-intc: add the new config structures for da8xx SoCs

Add the new-style config structures for da8xx SoCs. They will be used
once we make the cp-intc driver stop using davinci_soc_info.

Reviewed-by: David Lechner <david@lechnology.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

show more ...

ARM: davinci: cp-intc: add a wrapper around cp_intc_init()

We're going to extend the cp_intc_init() function with a config
structure so we can drop the intc-related fields from davinci_s

ARM: davinci: cp-intc: add a wrapper around cp_intc_init()

We're going to extend the cp_intc_init() function with a config
structure so we can drop the intc-related fields from davinci_soc_info.

Once we do it, we won't be able to use this routine directly as the
init_irq callback. Wrap the calls in additional helpers that don't
take parameters and can be assigned to init_irq.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

show more ...

ARM: davinci: make irqs.h a local header

The existence of irqs.h in mach-davinci/include/mach only makes sense
without SPARSE_IRQ as it's then expected to define NR_IRQS and is
inclu

ARM: davinci: make irqs.h a local header

The existence of irqs.h in mach-davinci/include/mach only makes sense
without SPARSE_IRQ as it's then expected to define NR_IRQS and is
included from asm/irq.h. As we now support SPARSE_IRQ, this header can
be moved to mach-davinci and used as the source of HW interrupt numbers.

While updating the includes in various files - also rearrange the
headers by directory (linux/asm/mach).

Reviewed-by: David Lechner <david@lechnology.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

show more ...

ARM: davinci: wrap HW interrupt numbers with a macro

Once we select SPARSE_IRQ, the interrupt numbers defined in mach/irqs.h
will only signify the hardware interrupt offsets, not the int

ARM: davinci: wrap HW interrupt numbers with a macro

Once we select SPARSE_IRQ, the interrupt numbers defined in mach/irqs.h
will only signify the hardware interrupt offsets, not the interrupt
numbers seen by linux. Introduce a wrapper macro that translates the
hwirq number to virtual numbers. For now it's just a dummy. Use that
macro when specifying the interrupts in resources for platform devices.

Reviewed-by: David Lechner <david@lechnology.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

show more ...

ARM: davinci: remove davinci_intc_type

We now use the generic ARM irq handler on davinci. There are no more
users that check davinci_intc_type. Remove the variable and all its
refere

ARM: davinci: remove davinci_intc_type

We now use the generic ARM irq handler on davinci. There are no more
users that check davinci_intc_type. Remove the variable and all its
references.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

show more ...