ARM: at91: pm: add pm support for SAMA7G5

Add support for SAMA7G5 power management modes: standby, ulp0, ulp1, backup.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Ni

ARM: at91: pm: add pm support for SAMA7G5

Add support for SAMA7G5 power management modes: standby, ulp0, ulp1, backup.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20210415105010.569620-24-claudiu.beznea@microchip.com

show more ...

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500

Based on 2 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of th

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500

Based on 2 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation #

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-only

has been chosen to replace the boilerplate/reference in 4122 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

ARM: at91: pm: initial PM support for SAM9X60

Add initial PM support for SAM9X60. This include idle, WFI and ULP0.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Alexan

ARM: at91: pm: initial PM support for SAM9X60

Add initial PM support for SAM9X60. This include idle, WFI and ULP0.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>

show more ...

ARM: at91: pm: Add sama5d2 backup mode

The sama5d2 has a mode were it is possible to cut power to the SoC while
keeping the RAM in self refresh.
Resuming from that mode needs support in the firmware

ARM: at91: pm: Add sama5d2 backup mode

The sama5d2 has a mode were it is possible to cut power to the SoC while
keeping the RAM in self refresh.
Resuming from that mode needs support in the firmware/bootloader.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Wenyou Yang <wenyou.yang@atmel.com>

show more ...

ARM: at91: pm: Merge all at91sam9*_pm_init

The PM initialization is now identical for all at91sam9. Merge the
functions.

Acked-by: Wenyou Yang <wenyou.yang@atmel.com>
Signed-off-by: Alexandre Bello

ARM: at91: pm: Merge all at91sam9*_pm_init

The PM initialization is now identical for all at91sam9. Merge the
functions.

Acked-by: Wenyou Yang <wenyou.yang@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>

show more ...

ARM: at91: remove useless includes and function prototypes

Remove leftover from the previous cleanup

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Boris Brezillo

ARM: at91: remove useless includes and function prototypes

Remove leftover from the previous cleanup

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>

show more ...

ARM: at91: pm: move idle functions to pm.c

Avoid using code from clk/at91 for PM.
This also has the bonus effect of setting arm_pm_idle for sama5 platforms.

Signed-off-by: Alexandre Belloni <alexan

ARM: at91: pm: move idle functions to pm.c

Avoid using code from clk/at91 for PM.
This also has the bonus effect of setting arm_pm_idle for sama5 platforms.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>

show more ...

ARM: at91: properly initialize timer

Use clocksource_of_init to initialize the system timer instead of relying on a
custom function.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electro

ARM: at91: properly initialize timer

Use clocksource_of_init to initialize the system timer instead of relying on a
custom function.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

show more ...

ARM: at91: remove unused at91_ioremap_matrix and header

at91_ioremap_matrix and the at91_matrix.h header are not used anymore, remove
them.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-

ARM: at91: remove unused at91_ioremap_matrix and header

at91_ioremap_matrix and the at91_matrix.h header are not used anymore, remove
them.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

show more ...

ARM: at91: fix pm declarations

In a recent rearrangement of the at91 pm initialization code, a broken
set of declarations was added for the !CONFIG_PM-case, leading to
this link error:

arch/arm/mac

ARM: at91: fix pm declarations

In a recent rearrangement of the at91 pm initialization code, a broken
set of declarations was added for the !CONFIG_PM-case, leading to
this link error:

arch/arm/mach-at91/board-dt-sama5.o: In function `at91_rm9200_pm_init':
arch/arm/mach-at91/generic.h:40: multiple definition of `at91_rm9200_pm_init'
arch/arm/mach-at91/setup.o:arch/arm/mach-at91/generic.h:40: first defined here
arch/arm/mach-at91/board-dt-sama5.o: In function `at91_sam9260_pm_init':
arch/arm/mach-at91/generic.h:41: multiple definition of `at91_sam9260_pm_init'
arch/arm/mach-at91/setup.o:arch/arm/mach-at91/generic.h:41: first defined here
arch/arm/mach-at91/board-dt-sama5.o: In function `at91_sam9g45_pm_init':
arch/arm/mach-at91/generic.h:42: multiple definition of `at91_sam9g45_pm_init'
arch/arm/mach-at91/setup.o:arch/arm/mach-at91/generic.h:42: first defined here

This adds the missing 'static inline' to the declarations to avoid
creating a copy of the functions in each file that includes the
header.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 4db0ba22da9 ("ARM: at91: pm: prepare for multiplatform")
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>

show more ...

ARM: at91/trivial: unify functions and machine names

Remove the string "(Device Tree)" after the machine name because all AT91
machines use the DT nowadays.
Also change some function names to unify

ARM: at91/trivial: unify functions and machine names

Remove the string "(Device Tree)" after the machine name because all AT91
machines use the DT nowadays.
Also change some function names to unify following the convention:
- at91sam9xxx aren't named sam9, 9xxx but with the full name
- sama5 are the ones that don't have the at91 prefix anymore.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

show more ...

ARM: at91: remove at91_dt_initialize and machine init_early()

Move the ramc initialization to pm.c as it is the only user left.
This allows us to get rid of at91_dt_initialize() that was the only on

ARM: at91: remove at91_dt_initialize and machine init_early()

Move the ramc initialization to pm.c as it is the only user left.
This allows us to get rid of at91_dt_initialize() that was the only one called
by the init_early() function pointer of struct machine_desc.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
[nicolas.ferre@atmel.com: adapt patch to newer series]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

show more ...

ARM: at91: fix PM initialization for newer SoCs

Newer SoCs: at91sam9x5, at91sam9n12, sama5d3 and sama5d4 embed a DDR controller
and have a different PMC status register layout than the at91sam9g45.

ARM: at91: fix PM initialization for newer SoCs

Newer SoCs: at91sam9x5, at91sam9n12, sama5d3 and sama5d4 embed a DDR controller
and have a different PMC status register layout than the at91sam9g45. Create
another at91_sam9x5_pm_init() function to match this compatibility.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

show more ...

ARM: at91: move at91rm9200_idle() to clk/at91/pmc.c

Move at91rm9200_idle() along with at91sam9_idle() in clk/at91/pmc.c.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acke

ARM: at91: move at91rm9200_idle() to clk/at91/pmc.c

Move at91rm9200_idle() along with at91sam9_idle() in clk/at91/pmc.c.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Michael Turquette <mturquette@linaro.org>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

show more ...

ARM: at91: remove unused at91_init_sram

SRAM initialization is now done through the mmio-sram driver and
at91_init_sram() is not called anymore, remove it.

Signed-off-by: Alexandre Belloni <alexand

ARM: at91: remove unused at91_init_sram

SRAM initialization is now done through the mmio-sram driver and
at91_init_sram() is not called anymore, remove it.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

show more ...

ARM: at91: pm: prepare for multiplatform

Split at91_pm_init() in three variants that are called by the respective SoCs
.init_machine. This allows to remove the of_machine_is_compatible() calls and
m

ARM: at91: pm: prepare for multiplatform

Split at91_pm_init() in three variants that are called by the respective SoCs
.init_machine. This allows to remove the of_machine_is_compatible() calls and
move at91_pm_init() out of arch_initcall() which is required for multiplatform.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

show more ...

ARM: at91: remove useless at91rm9200_set_type()

Since all rm9200 board files have been removed, there is no user of
at91rm9200_set_type() left. Remove it

Signed-off-by: Alexandre Belloni <alexandre

ARM: at91: remove useless at91rm9200_set_type()

Since all rm9200 board files have been removed, there is no user of
at91rm9200_set_type() left. Remove it

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

show more ...

ARM: at91: remove useless at91rm9200_dt_initialize()

at91rm9200_dt_initialize() is doing the same as at91_dt_initialize(), use that
one instead.

Signed-off-by: Alexandre Belloni <alexandre.belloni@

ARM: at91: remove useless at91rm9200_dt_initialize()

at91rm9200_dt_initialize() is doing the same as at91_dt_initialize(), use that
one instead.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

show more ...

ARM: at91: remove useless at91_sysirq_mask_rtx

The irq fixup from at91_sysirq_mask_rtc and at91_sysirq_mask_rtt is now handled
by aic_common_rtc_irq_fixup and aic_common_rtt_irq_fixup. Remove those

ARM: at91: remove useless at91_sysirq_mask_rtx

The irq fixup from at91_sysirq_mask_rtc and at91_sysirq_mask_rtt is now handled
by aic_common_rtc_irq_fixup and aic_common_rtt_irq_fixup. Remove those useless
functions.
Also remove the now unused mach/at91_rtt.h header.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

show more ...

ARM: at91/clocksource: remove !DT PIT initializations

As AT91 !DT code is now removed, cleanup the PIT clocksource driver.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[nicolas.ferre@atmel.com: spl

ARM: at91/clocksource: remove !DT PIT initializations

As AT91 !DT code is now removed, cleanup the PIT clocksource driver.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[nicolas.ferre@atmel.com: split patch]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Boris BREZILLON <boris.brezillon@free-electrons.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>

show more ...

ARM: at91: at91rm9200 ST initialization is now DT only

As at91rm9200 is now DT only, there is no need to keep old entry point in this
at91rm9200 System Timer (ST) driver.

Signed-off-by: Arnd Bergma

ARM: at91: at91rm9200 ST initialization is now DT only

As at91rm9200 is now DT only, there is no need to keep old entry point in this
at91rm9200 System Timer (ST) driver.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[nicolas.ferre@atmel.com: split patch]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

show more ...

ARM: at91: remove old AT91-specific drivers

GPIO and LED drivers were replaced by generic ones for DT boards. These drivers
were remaining: delete them now. Modifications are also done on the
corres

ARM: at91: remove old AT91-specific drivers

GPIO and LED drivers were replaced by generic ones for DT boards. These drivers
were remaining: delete them now. Modifications are also done on the
corresponding header files.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[nicolas.ferre@atmel.com: split patch]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

show more ...

ARM: at91: cleanup initilisation code by removing dead code

The AT91-specific SoC strucutre "struct at91_init_soc" was filled with specific
!DT initilisation functions. Now that we got rid of the !D

ARM: at91: cleanup initilisation code by removing dead code

The AT91-specific SoC strucutre "struct at91_init_soc" was filled with specific
!DT initilisation functions. Now that we got rid of the !DT board file
description, remove unneeded functions.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[nicolas.ferre@atmel.com: split patch]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

show more ...

ARM: at91: remove unused IRQ function declarations

Since 3b26f39b0ab1 (ARM: at91: make use of the new AIC driver for dt enabled
boards) the old IRQ initialisation functions aren't used anymore: remo

ARM: at91: remove unused IRQ function declarations

Since 3b26f39b0ab1 (ARM: at91: make use of the new AIC driver for dt enabled
boards) the old IRQ initialisation functions aren't used anymore: remove their
declaration in generic.h.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com>

show more ...

ARM: at91: remove legacy IRQ driver and related code

Remove irc.c and associated header file. The related code was idendified by
the CONFIG_OLD_IRQ_AT91 option that was removed previously. It has be

ARM: at91: remove legacy IRQ driver and related code

Remove irc.c and associated header file. The related code was idendified by
the CONFIG_OLD_IRQ_AT91 option that was removed previously. It has been spotted
by following coccinelle semantic match:

@rule1@
expression E;
statement S;
@@
(
- if (IS_ENABLED(CONFIG_OLD_IRQ_AT91)) S
|
- if (IS_ENABLED(CONFIG_OLD_IRQ_AT91) && E) S
)

Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com>

show more ...