arm_pmu: Fix write counter incorrect in ARMv7 big-endian mode

Commit 3a95200d3f89 ("arm_pmu: Change API to support 64bit counter values")
changes the input "value" type from 32-bit to 64-bit, which

arm_pmu: Fix write counter incorrect in ARMv7 big-endian mode

Commit 3a95200d3f89 ("arm_pmu: Change API to support 64bit counter values")
changes the input "value" type from 32-bit to 64-bit, which introduces the
following problem: ARMv7 PMU counters is 32-bit width, in big-endian mode,
write counter uses high 32-bit, which writes an incorrect value.

Before:

Performance counter stats for 'ls':

2.22 msec task-clock # 0.675 CPUs utilized
0 context-switches # 0.000 K/sec
0 cpu-migrations # 0.000 K/sec
49 page-faults # 0.022 M/sec
2150476593 cycles # 966.663 GHz
2148588788 instructions # 1.00 insn per cycle
2147745484 branches # 965435.074 M/sec
2147508540 branch-misses # 99.99% of all branches

None of the above hw event counters are correct.

Solution:

"value" forcibly converted to 32-bit type before being written to PMU register.

After:

Performance counter stats for 'ls':

2.09 msec task-clock # 0.681 CPUs utilized
0 context-switches # 0.000 K/sec
0 cpu-migrations # 0.000 K/sec
46 page-faults # 0.022 M/sec
2807301 cycles # 1.344 GHz
1060159 instructions # 0.38 insn per cycle
250496 branches # 119.914 M/sec
23192 branch-misses # 9.26% of all branches

Fixes: 3a95200d3f89 ("arm_pmu: Change API to support 64bit counter values")
Cc: <stable@vger.kernel.org>
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20210430012659.232110-1-yangjihong1@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>

show more ...

arm_pmu: Fix write counter incorrect in ARMv7 big-endian mode

commit fdbef8c4e68ad423416aa6cc93d1616d6f8ac5b3 upstream.

Commit 3a95200d3f89 ("arm_pmu: Change API to support 64bit counter values")
c

arm_pmu: Fix write counter incorrect in ARMv7 big-endian mode

commit fdbef8c4e68ad423416aa6cc93d1616d6f8ac5b3 upstream.

Commit 3a95200d3f89 ("arm_pmu: Change API to support 64bit counter values")
changes the input "value" type from 32-bit to 64-bit, which introduces the
following problem: ARMv7 PMU counters is 32-bit width, in big-endian mode,
write counter uses high 32-bit, which writes an incorrect value.

Before:

Performance counter stats for 'ls':

2.22 msec task-clock # 0.675 CPUs utilized
0 context-switches # 0.000 K/sec
0 cpu-migrations # 0.000 K/sec
49 page-faults # 0.022 M/sec
2150476593 cycles # 966.663 GHz
2148588788 instructions # 1.00 insn per cycle
2147745484 branches # 965435.074 M/sec
2147508540 branch-misses # 99.99% of all branches

None of the above hw event counters are correct.

Solution:

"value" forcibly converted to 32-bit type before being written to PMU register.

After:

Performance counter stats for 'ls':

2.09 msec task-clock # 0.681 CPUs utilized
0 context-switches # 0.000 K/sec
0 cpu-migrations # 0.000 K/sec
46 page-faults # 0.022 M/sec
2807301 cycles # 1.344 GHz
1060159 instructions # 0.38 insn per cycle
250496 branches # 119.914 M/sec
23192 branch-misses # 9.26% of all branches

Fixes: 3a95200d3f89 ("arm_pmu: Change API to support 64bit counter values")
Cc: <stable@vger.kernel.org>
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20210430012659.232110-1-yangjihong1@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

ARM: 8873/1: perf: cleanup cppcheck shifting warning

There is error from cppcheck tool.
"Shifting signed 32-bit value by 31 bits is undefined behaviour errors"

This error is false positive.
change

ARM: 8873/1: perf: cleanup cppcheck shifting warning

There is error from cppcheck tool.
"Shifting signed 32-bit value by 31 bits is undefined behaviour errors"

This error is false positive.
change to use BIT() macro for improvement.

Signed-off-by: Phong Tran <tranmanphong@gmail.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

show more ...

arm_pmu: Tidy up clear_event_idx call backs

The armpmu uses get_event_idx callback to allocate an event
counter for a given event, which marks the selected counter
as "used". Now, when we delete the

arm_pmu: Tidy up clear_event_idx call backs

The armpmu uses get_event_idx callback to allocate an event
counter for a given event, which marks the selected counter
as "used". Now, when we delete the counter, the arm_pmu goes
ahead and clears the "used" bit and then invokes the "clear_event_idx"
call back, which kind of splits the job between the core code
and the backend. To keep things tidy, mandate the implementation
of clear_event_idx() and add it for exisiting backends.
This will be useful for adding the chained event support, where
we leave the event idx maintenance to the backend.

Also, when an event is removed from the PMU, reset the hw.idx
to indicate that a counter is not allocated for this event,
to help the backends do better checks. This will be also used
for the chain counter support.

Cc: Will Deacon <will.deacon@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

show more ...

arm_pmu: Change API to support 64bit counter values

Convert the {read/write}_counter APIs to handle 64bit values
to enable supporting chained event counters. The backends still
use 32bit values and

arm_pmu: Change API to support 64bit counter values

Convert the {read/write}_counter APIs to handle 64bit values
to enable supporting chained event counters. The backends still
use 32bit values and we pass them 32bit values only. So in effect
there are no functional changes.

Cc: Will Deacon <will.deacon@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

show more ...

arm_pmu: Clean up maximum period handling

Each PMU defines their max_period of the counter as the maximum
value that can be counted. Since all the PMU backends support
32bit counters by default, let

arm_pmu: Clean up maximum period handling

Each PMU defines their max_period of the counter as the maximum
value that can be counted. Since all the PMU backends support
32bit counters by default, let us remove the redundant field.

No functional changes.

Cc: Will Deacon <will.deacon@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

show more ...

arm: perf: prevent unbind/bind via sysfs

Unbinding and rebinding the ARM PMU driver via sysfs leads to a
warning followed by more errors:
WARNING: CPU: 0 PID: 217 at kernel/irq/chip.c:1034 irq_mod

arm: perf: prevent unbind/bind via sysfs

Unbinding and rebinding the ARM PMU driver via sysfs leads to a
warning followed by more errors:
WARNING: CPU: 0 PID: 217 at kernel/irq/chip.c:1034 irq_modify_status+0x150/0x16c
..
genirq: Flags mismatch irq 19. 00010c04 (arm-pmu) vs. 00010c04 (arm-pmu)
hw perfevents: unable to request IRQ19 for ARM PMU counters
hw perfevents: /pmu: failed to register PMU devices!
armv7-pmu: probe of pmu failed with error -16

The driver is clearly not designed to be removed. Disable bind/
unbind for this driver.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Will Deacon <will.deacon@arm.com>

show more ...

arm_pmu: simplify arm_pmu::handle_irq

The arm_pmu::handle_irq() callback has the same prototype as a generic
IRQ handler, taking the IRQ number and a void pointer argument which it
must convert to a

arm_pmu: simplify arm_pmu::handle_irq

The arm_pmu::handle_irq() callback has the same prototype as a generic
IRQ handler, taking the IRQ number and a void pointer argument which it
must convert to an arm_pmu pointer.

This means that all arm_pmu::handle_irq() take an IRQ number they never
use, and all must explicitly cast the void pointer to an arm_pmu
pointer.

Instead, let's change arm_pmu::handle_irq to take an arm_pmu pointer,
allowing these casts to be removed. The redundant IRQ number parameter
is also removed.

Suggested-by: Hoeun Ryu <hoeun.ryu@lge.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

show more ...

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.

For non */uapi/* files that summary was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139

and resulted in the first patch in this series.

If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930

and resulted in the second patch in this series.

- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:

SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1

and that resulted in the third patch in this series.

- when the two scanners agreed on the detected license(s), that became
the concluded license(s).

- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.

- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).

- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.

- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct

This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

arm: perf: use builtin_platform_driver

Use builtin_platform_driver() helper to simplify the code.

Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

arm: perf: move to common attr_group fields

By using a common attr_groups array, the common arm_pmu code can set up
common files (e.g. cpumask) for us in subsequent patches.

Signed-off-by: Mark Rut

arm: perf: move to common attr_group fields

By using a common attr_groups array, the common arm_pmu code can set up
common files (e.g. cpumask) for us in subsequent patches.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

show more ...

ARM: perf: Set ARMv7 SDER SUNIDEN bit

ARMv7 counters other than the CPU cycle counter only work if the Secure
Debug Enable Register (SDER) SUNIDEN bit is set.

Since access to the SDER is only possi

ARM: perf: Set ARMv7 SDER SUNIDEN bit

ARMv7 counters other than the CPU cycle counter only work if the Secure
Debug Enable Register (SDER) SUNIDEN bit is set.

Since access to the SDER is only possible in secure state, it will
only be done if the device tree property "secure-reg-access" is set.

Without this:

Performance counter stats for 'sleep 1':

14606094 cycles # 0.000 GHz
0 instructions # 0.00 insns per cycle

After applying:

Performance counter stats for 'sleep 1':

5843809 cycles
2566484 instructions # 0.44 insns per cycle

1.020144000 seconds time elapsed

Some platforms (eg i.MX53) may also need additional platform specific
setup.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Martin Fuzzey <mfuzzey@parkeon.com>
Signed-off-by: Pooya Keshavarzi <Pooya.Keshavarzi@de.bosch.com>
Signed-off-by: George G. Davis <george_davis@mentor.com>
[will: add warning if property is found on arm64]
Signed-off-by: Will Deacon <will.deacon@arm.com>

show more ...

ARM: perf: add format entry to describe event -> config mapping

It's all very well providing an events directory to userspace that
details our events in terms of "event=0xNN", but if we don't define

ARM: perf: add format entry to describe event -> config mapping

It's all very well providing an events directory to userspace that
details our events in terms of "event=0xNN", but if we don't define how
to encode the "event" field in the perf attr.config, then it's a waste
of time.

This patch adds a single format entry to describe that the event field
occupies the bottom 8 bits of our config field on ARMv7.

Signed-off-by: Will Deacon <will.deacon@arm.com>

show more ...

arm: perf: Add event descriptions

Add additional information about the ARM architected hardware events
to make counters self describing. This makes the hardware PMUs easier
to use as perf list conta

arm: perf: Add event descriptions

Add additional information about the ARM architected hardware events
to make counters self describing. This makes the hardware PMUs easier
to use as perf list contains possible events instead of users having
to refer to documentation like the ARM TRMs.

Signed-off-by: Drew Richardson <drew.richardson@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

show more ...

arm: perf: Convert event enums to #defines

The enums are not necessary and this allows the event values to be
used to construct static strings at compile time.

Signed-off-by: Drew Richardson <drew.

arm: perf: Convert event enums to #defines

The enums are not necessary and this allows the event values to be
used to construct static strings at compile time.

Signed-off-by: Drew Richardson <drew.richardson@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

show more ...

arm: perf: factor arm_pmu core out to drivers

To enable sharing of the arm_pmu code with arm64, this patch factors it
out to drivers/perf/. A new drivers/perf directory is added for
performance moni

arm: perf: factor arm_pmu core out to drivers

To enable sharing of the arm_pmu code with arm64, this patch factors it
out to drivers/perf/. A new drivers/perf directory is added for
performance monitor drivers to live under.

MAINTAINERS is updated accordingly. Files added previously without a
corresponsing MAINTAINERS update (perf_regs.c, perf_callchain.c, and
perf_event.h) are also added.

Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
[will: augmented Kconfig help slightly]
Signed-off-by: Will Deacon <will.deacon@arm.com>

show more ...

arm: perf: factor out armv7 pmu driver

Now that the core arm perf code maintains no global state and all
microarchitecture-specific PMU data can be fed in through the shared
probe function, it's pos

arm: perf: factor out armv7 pmu driver

Now that the core arm perf code maintains no global state and all
microarchitecture-specific PMU data can be fed in through the shared
probe function, it's possible to use it as a library and get rid of the
C file includes we have currently.

This patch factors out the ARMv7-specific portions out into the ARMv7
driver. For the moment this is always built if perf event support is
enabled, but the preprocessor guards will leave behind an empty file.

Now that perf_event_cpu.c contains no microarchitecture-specific data,
the associated probing code is removed, completing its relegation to a
library file. The vestigal "arm-pmu" platform device ID is removed in
this patch, as it has been unused since platform files were updated to
specify a more specific PMU variant.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

show more ...

arm: perf: probe number of counters on affine CPUs

In heterogeneous systems, the number of counters may differ across
clusters. To find the number of counters for a cluster, we must probe
the PMU fr

arm: perf: probe number of counters on affine CPUs

In heterogeneous systems, the number of counters may differ across
clusters. To find the number of counters for a cluster, we must probe
the PMU from a CPU in that cluster.

Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

show more ...

ARM: perf: Add support for Scorpion PMUs

Scorpion supports a set of local performance monitor event
selection registers (LPM) sitting behind a cp15 based interface
that extend the architected PMU ev

ARM: perf: Add support for Scorpion PMUs

Scorpion supports a set of local performance monitor event
selection registers (LPM) sitting behind a cp15 based interface
that extend the architected PMU events to include Scorpion CPU
and Venum VFP specific events. To use these events the user is
expected to program the lpm register with the event code shifted
into the group they care about and then point the PMNx event at
that region+group combo by writing a LPMn_GROUPx event. Add
support for this hardware.

Note: the raw event number is a pure software construct that
allows us to map the multi-dimensional number space of regions,
groups, and event codes into a flat event number space suitable
for use by the perf framework.

This is based on code originally written by Sheetal Sahasrabudhe,
Ashwin Chaugule, and Neil Leeder [1].

[1] https://www.codeaurora.org/cgit/quic/la/kernel/msm/tree/arch/arm/kernel/perf_event_msm.c?h=msm-3.4

Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Neil Leeder <nleeder@codeaurora.org>
Cc: Ashwin Chaugule <ashwinc@codeaurora.org>
Cc: Sheetal Sahasrabudhe <sheetals@codeaurora.org>
Cc: <devicetree@vger.kernel.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>

show more ...

ARM: perf: Only reset PMxEVCNTCR registers on reset

The Krait specific PMxEVCNTCR register is unpredictable upon
reset. Currently we clear the register before we setup an event,
but we don't need to

ARM: perf: Only reset PMxEVCNTCR registers on reset

The Krait specific PMxEVCNTCR register is unpredictable upon
reset. Currently we clear the register before we setup an event,
but we don't need to do that. Instead, we can iterate through all
the events and clear them once when we reset the PMU, saving a
write in the event setup path.

Cc: Neil Leeder <nleeder@codeaurora.org>
Cc: Ashwin Chaugule <ashwinc@codeaurora.org>
Cc: Sheetal Sahasrabudhe <sheetals@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>

show more ...

ARM: perf: Preparatory work for Scorpion PMU support

Do some things to make the Krait PMU support code generic enough
to be used by the Scorpion PMU support code.

* Rename the venum register funct

ARM: perf: Preparatory work for Scorpion PMU support

Do some things to make the Krait PMU support code generic enough
to be used by the Scorpion PMU support code.

* Rename the venum register functions to be venum instead of krait
specific because the same registers exist on Scorpion

* Add some macros to decode our Krait specific event encoding that's
the same on Scorpion (modulo an extra region).

* Drop 'krait' from krait_clear_pmresrn_group() so it can be used
by Scorpion code

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>

show more ...

arm: perf: kill get_hw_events()

Now that the arm pmu code is limited to CPU PMUs the get_hw_events()
function is superfluous, as we'll always have a set of per-cpu
pmu_hw_events structures.

This pa

arm: perf: kill get_hw_events()

Now that the arm pmu code is limited to CPU PMUs the get_hw_events()
function is superfluous, as we'll always have a set of per-cpu
pmu_hw_events structures.

This patch removes the get_hw_events() function, replacing it with
a percpu hw_events pointer. Uses of get_hw_events are updated to use
this_cpu_ptr.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>

show more ...

ARM: perf: use pr_* instead of printk

There are a few remaining uses of printk in the ARM perf code, so move
them over to the pr_* variants instead.

Reported-by: Russell King <linux@arm.linux.org.u

ARM: perf: use pr_* instead of printk

There are a few remaining uses of printk in the ARM perf code, so move
them over to the pr_* variants instead.

Reported-by: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Will Deacon <will.deacon@arm.com>

show more ...

ARM: perf: remove useless return and check of idx in counter handling

Idx sanity check was once implemented separately in these counter
handling functions and then return value was treated as a judg

ARM: perf: remove useless return and check of idx in counter handling

Idx sanity check was once implemented separately in these counter
handling functions and then return value was treated as a judgement.
armv7_pmnc_select_counter()
armv7_pmnc_enable_counter()
armv7_pmnc_disable_counter()
armv7_pmnc_enable_intens()
armv7_pmnc_disable_intens()
But we do not need to do this now, as idx validation check was moved
out all these functions by commit 7279adbd9bb8ef8f(ARM: perf: check ARMv7
counter validity on a per-pmu basis).
Let's remove the useless return of idx from these functions.

Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: chai wen <chaiw.fnst@cn.fujitsu.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

show more ...

arm: perf: krait: stop using singleton PMU

Currently the krait_pmu_{enable,disable}_event functions use the global
cpu_pmu variable while all the other pmu enable/disable functions
derive this from

arm: perf: krait: stop using singleton PMU

Currently the krait_pmu_{enable,disable}_event functions use the global
cpu_pmu variable while all the other pmu enable/disable functions
derive this from the event argument.

This patch brings the Krait functions into line with the rest of the PMU
backends by deriving the address of the pmu from the event argument.

Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Tested-by: Christopher Covington <cov@codeaurora.org>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

show more ...