ARM: reorder defconfig files

Some Kconfig options have moved around, so adapt the defconfig files
accordingly.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

ARM: config: Update Gemini defconfig

The Gemini defconfig needs to be updated due to DSA driver
Kconfig changes in the v5.18 merge window:
CONFIG_NET_DSA_REALTEK_SMI is now behind
CONFIG_NET_DSA_REA

ARM: config: Update Gemini defconfig

The Gemini defconfig needs to be updated due to DSA driver
Kconfig changes in the v5.18 merge window:
CONFIG_NET_DSA_REALTEK_SMI is now behind
CONFIG_NET_DSA_REALTEK and the desired DSA switch need
to be selected explicitly with
CONFIG_NET_DSA_REALTEK_RTL8366RB.

Take this opportunity to update some other minor config
options:

- CONFIG_MARVELL_PHY moved around because of Kconfig
changes.

- CONFIG_SENSORS_DRIVETEMP should be selected since is
regulates the system critical alert temperature on
some devices, which is nice if it is handled even
if initramfs or root fails to mount.

Fixes: 319a70a5fea9 ("net: dsa: realtek-smi: move to subdirectory")
Fixes: 765c39a4fafe ("net: dsa: realtek: convert subdrivers into modules")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com>
Cc: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

ARM: configs: gemini: Activate crypto driver

This enables the SL3516 crypto driver on the Gemini platforms
where it is available, by default in the defconfig. Clean
up some noise around the crypto o

ARM: configs: gemini: Activate crypto driver

This enables the SL3516 crypto driver on the Gemini platforms
where it is available, by default in the defconfig. Clean
up some noise around the crypto options while we're at it.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Corentin Labbe <clabbe@baylibre.com>
Link: https://lore.kernel.org/r/20211206011158.4180141-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

ARM: defconfig: gemini: Restore framebuffer

The framebuffer is gone on the D-Link DIR-685, restore it.

Fixes: f611b1e7624c ("drm: Avoid circular dependencies for CONFIG_FB")
Signed-off-by: Linus Wa

ARM: defconfig: gemini: Restore framebuffer

The framebuffer is gone on the D-Link DIR-685, restore it.

Fixes: f611b1e7624c ("drm: Avoid circular dependencies for CONFIG_FB")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210922200933.1825752-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

ARM: defconfig: gemini: Update defconfig

This updates the gemini defconfig with Kconfig shuffling and
some of the features activated in new upstream drivers and newly
supported devices:

- Move some

ARM: defconfig: gemini: Update defconfig

This updates the gemini defconfig with Kconfig shuffling and
some of the features activated in new upstream drivers and newly
supported devices:

- Move some symbols around due to Kconfig alterations,
this affects CONFIG_PREEMPT, CONFIG_PCI, CONFIG_CMA,
CONFIG_BINFMT_MISC, CONFIG_PARTITION_ADVANCED.
- Add RedBoot partition parsing, as all the Gemini
devices use some RedBoot derivative and store their
flash partition tables in this format.
- Enable bridge and VLAN filtering: a majority of the
Gemini devices have some kind of DSA chip for ethernet
bridging/routing.
- Enable CONFIG_NET_DSA_REALTEK_SMI as this DSA router
chip is found in the Gemini-based products. This makes
explicit selection of CONFIG_REALTEK_PHY unnecessary
so that goes away.
- Enable CONFIG_TUN since Gemini userspace often make
use of the TUN interface for network services.
- Enable MARVELL_PHY as Marvell PHY connectors are often
found in Gemini systems.
- Enable basic 802.11 libraries as many Gemini systems
have wireless PCI cards.

Link: https://lore.kernel.org/r/20200101143520.14218-1-linus.walleij@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

show more ...

ARM: configs: Remove useless UEVENT_HELPER_PATH

Remove the CONFIG_UEVENT_HELPER_PATH because:
1. It is disabled since commit 1be01d4a5714 ("driver: base: Disable
CONFIG_UEVENT_HELPER by default")

ARM: configs: Remove useless UEVENT_HELPER_PATH

Remove the CONFIG_UEVENT_HELPER_PATH because:
1. It is disabled since commit 1be01d4a5714 ("driver: base: Disable
CONFIG_UEVENT_HELPER by default") as its dependency (UEVENT_HELPER) was
made default to 'n',
2. It is not recommended (help message: "This should not be used today
[...] creates a high system load") and was kept only for ancient
userland,
3. Certain userland specifically requests it to be disabled (systemd
README: "Legacy hotplug slows down the system and confuses udev").

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

show more ...

configs: get rid of obsolete CONFIG_ENABLE_WARN_DEPRECATED

This Kconfig option was removed during v4.19 development in commit
771c035372a0 ("deprecate the '__deprecated' attribute warnings entirely

configs: get rid of obsolete CONFIG_ENABLE_WARN_DEPRECATED

This Kconfig option was removed during v4.19 development in commit
771c035372a0 ("deprecate the '__deprecated' attribute warnings entirely
and for good") so there's no point to keep it in defconfigs any longer.

FWIW defconfigs were patched with:
--------------------------->8----------------------
find . -name *_defconfig -exec sed -i '/CONFIG_ENABLE_WARN_DEPRECATED/d' {} \;
--------------------------->8----------------------

Link: http://lkml.kernel.org/r/20190128152434.41969-1-abrodkin@synopsys.com
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

show more ...

ARM: defconfig: Update Gemini defconfig

This updates the Gemini defconfig with a config that will bring
up most of the recently merged and updated devices to some
functional level:

- We enable high

ARM: defconfig: Update Gemini defconfig

This updates the Gemini defconfig with a config that will bring
up most of the recently merged and updated devices to some
functional level:

- We enable high resolution timers (the right thing to do)
- Enable CMA for the framebuffer, and the new TVE200
framebuffer driver and the Ilitek ILI9322 driver for
graphics on the D-Link DIR-685. HIGHMEM support comes in
as part of this.
- Enable networking and the new Cortina Gemini ethernet
driver.
- Enable MDIO over GPIO and the Realtek PHY devices used on
several of these systems.
- Enable I2C over GPIO and SPI over GPIO which is used on
several of these devices.
- Enable the Thermal framework, GPIO fan control and LM75 sensor
adding cooling on the D-Link DNS-313 with no userspace
involved even if only the kernel is working, rock solid
thermal for this platform.
- Enable JEDEC flash probing to support the Eon flash chip in
D-Link DNS-313.
- Enable LED disk triggers for the NAS type devices.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

ARM: defconfig: update Gemini defconfig

This updates the Gemini defconfig with drivers merged
for v4.13 or v4.14:
- ATA driver is merged
- DMA driver is merged
- RTC driver gets selected from defaul

ARM: defconfig: update Gemini defconfig

This updates the Gemini defconfig with drivers merged
for v4.13 or v4.14:
- ATA driver is merged
- DMA driver is merged
- RTC driver gets selected from default Kconfig

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

show more ...

ARM: configs: add a gemini defconfig

It makes sense to have a stripped-down defconfig for just Gemini, as
it is a pretty small platform used in NAS etc, and will use appended
device tree. It is also

ARM: configs: add a gemini defconfig

It makes sense to have a stripped-down defconfig for just Gemini, as
it is a pretty small platform used in NAS etc, and will use appended
device tree. It is also quick to compile and test. Hopefully this
defconfig can be a good base for distributions such as OpenWRT.

I plan to add in the config options needed for the different
variants of Gemini as we go along.

Cc: Janos Laube <janos.dev@gmail.com>
Cc: Paulius Zaleckas <paulius.zaleckas@gmail.com>
Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

show more ...

ARM: defconfig: gemini: Update defconfig

This updates the gemini defconfig with Kconfig shuffling and
some of the features activated in new upstream drivers and newly
supported devic

ARM: defconfig: gemini: Update defconfig

This updates the gemini defconfig with Kconfig shuffling and
some of the features activated in new upstream drivers and newly
supported devices:

- Move some symbols around due to Kconfig alterations,
this affects CONFIG_PREEMPT, CONFIG_PCI, CONFIG_CMA,
CONFIG_BINFMT_MISC, CONFIG_PARTITION_ADVANCED.
- Add RedBoot partition parsing, as all the Gemini
devices use some RedBoot derivative and store their
flash partition tables in this format.
- Enable bridge and VLAN filtering: a majority of the
Gemini devices have some kind of DSA chip for ethernet
bridging/routing.
- Enable CONFIG_NET_DSA_REALTEK_SMI as this DSA router
chip is found in the Gemini-based products. This makes
explicit selection of CONFIG_REALTEK_PHY unnecessary
so that goes away.
- Enable CONFIG_TUN since Gemini userspace often make
use of the TUN interface for network services.
- Enable MARVELL_PHY as Marvell PHY connectors are often
found in Gemini systems.
- Enable basic 802.11 libraries as many Gemini systems
have wireless PCI cards.

Link: https://lore.kernel.org/r/20200101143520.14218-1-linus.walleij@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

show more ...

ARM: configs: Remove useless UEVENT_HELPER_PATH

Remove the CONFIG_UEVENT_HELPER_PATH because:
1. It is disabled since commit 1be01d4a5714 ("driver: base: Disable
CONFIG_UEVENT_HEL

ARM: configs: Remove useless UEVENT_HELPER_PATH

Remove the CONFIG_UEVENT_HELPER_PATH because:
1. It is disabled since commit 1be01d4a5714 ("driver: base: Disable
CONFIG_UEVENT_HELPER by default") as its dependency (UEVENT_HELPER) was
made default to 'n',
2. It is not recommended (help message: "This should not be used today
[...] creates a high system load") and was kept only for ancient
userland,
3. Certain userland specifically requests it to be disabled (systemd
README: "Legacy hotplug slows down the system and confuses udev").

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

show more ...

configs: get rid of obsolete CONFIG_ENABLE_WARN_DEPRECATED

This Kconfig option was removed during v4.19 development in commit
771c035372a0 ("deprecate the '__deprecated' attribute warnin

configs: get rid of obsolete CONFIG_ENABLE_WARN_DEPRECATED

This Kconfig option was removed during v4.19 development in commit
771c035372a0 ("deprecate the '__deprecated' attribute warnings entirely
and for good") so there's no point to keep it in defconfigs any longer.

FWIW defconfigs were patched with:
--------------------------->8----------------------
find . -name *_defconfig -exec sed -i '/CONFIG_ENABLE_WARN_DEPRECATED/d' {} \;
--------------------------->8----------------------

Link: http://lkml.kernel.org/r/20190128152434.41969-1-abrodkin@synopsys.com
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

show more ...

ARM: defconfig: Update Gemini defconfig

This updates the Gemini defconfig with a config that will bring
up most of the recently merged and updated devices to some
functional level:

ARM: defconfig: Update Gemini defconfig

This updates the Gemini defconfig with a config that will bring
up most of the recently merged and updated devices to some
functional level:

- We enable high resolution timers (the right thing to do)
- Enable CMA for the framebuffer, and the new TVE200
framebuffer driver and the Ilitek ILI9322 driver for
graphics on the D-Link DIR-685. HIGHMEM support comes in
as part of this.
- Enable networking and the new Cortina Gemini ethernet
driver.
- Enable MDIO over GPIO and the Realtek PHY devices used on
several of these systems.
- Enable I2C over GPIO and SPI over GPIO which is used on
several of these devices.
- Enable the Thermal framework, GPIO fan control and LM75 sensor
adding cooling on the D-Link DNS-313 with no userspace
involved even if only the kernel is working, rock solid
thermal for this platform.
- Enable JEDEC flash probing to support the Eon flash chip in
D-Link DNS-313.
- Enable LED disk triggers for the NAS type devices.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

ARM: defconfig: update Gemini defconfig

This updates the Gemini defconfig with drivers merged
for v4.13 or v4.14:
- ATA driver is merged
- DMA driver is merged
- RTC driver g

ARM: defconfig: update Gemini defconfig

This updates the Gemini defconfig with drivers merged
for v4.13 or v4.14:
- ATA driver is merged
- DMA driver is merged
- RTC driver gets selected from default Kconfig

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

show more ...

ARM: configs: add a gemini defconfig

It makes sense to have a stripped-down defconfig for just Gemini, as
it is a pretty small platform used in NAS etc, and will use appended
device

ARM: configs: add a gemini defconfig

It makes sense to have a stripped-down defconfig for just Gemini, as
it is a pretty small platform used in NAS etc, and will use appended
device tree. It is also quick to compile and test. Hopefully this
defconfig can be a good base for distributions such as OpenWRT.

I plan to add in the config options needed for the different
variants of Gemini as we go along.

Cc: Janos Laube <janos.dev@gmail.com>
Cc: Paulius Zaleckas <paulius.zaleckas@gmail.com>
Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

show more ...