arch/*/configs/*defconfig: Replace AUTOFS4_FS by AUTOFS_FS

Commit a2225d931f75 ("autofs: remove left-over autofs4 stubs")
promised the removal of the fs/autofs/Kconfig fragment for AUTOFS4_FS
within

arch/*/configs/*defconfig: Replace AUTOFS4_FS by AUTOFS_FS

Commit a2225d931f75 ("autofs: remove left-over autofs4 stubs")
promised the removal of the fs/autofs/Kconfig fragment for AUTOFS4_FS
within a couple of releases, but five years later this still has not
happened yet, and AUTOFS4_FS is still enabled in 63 defconfigs.

Get rid of it mechanically:

git grep -l CONFIG_AUTOFS4_FS -- '*defconfig' |
xargs sed -i 's/AUTOFS4_FS/AUTOFS_FS/'

Also just remove the AUTOFS4_FS config option stub. Anybody who hasn't
regenerated their config file in the last five years will need to just
get the new name right when they do.

Signed-off-by: Sven Joachim <svenjoac@gmx.de>
Acked-by: Ian Kent <raven@themaw.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

show more ...

ARM: configs: replace CONFIG_NO_HZ=y with CONFIG_NO_HZ_IDLE=y

According to https://www.kernel.org/doc/html/latest/timers/no_hz.html,
CONFIG_NO_HZ=y should be replaced by CONFIG_NO_HZ_IDLE=y for newe

ARM: configs: replace CONFIG_NO_HZ=y with CONFIG_NO_HZ_IDLE=y

According to https://www.kernel.org/doc/html/latest/timers/no_hz.html,
CONFIG_NO_HZ=y should be replaced by CONFIG_NO_HZ_IDLE=y for newer
kernels, so let's reflect that in the 32-bit ARM defconfigs.

Signed-off-by: Stefan Hansson <newbie13xd@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> # Samsung
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220825162034.5901-1-newbie13xd@gmail.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

ARM: davinci: mark all ATAGS board files as unused

From an earlier discussion, it appears that the davinci da8xx machines
that are still functional have already been converted to DT, while the
remai

ARM: davinci: mark all ATAGS board files as unused

From an earlier discussion, it appears that the davinci da8xx machines
that are still functional have already been converted to DT, while the
remaining board files are only kept because nobody has stepped up to
remove them.

Mark all these boards as 'depends on UNUSED_BOARD_FILES' with the
plan to remove them in early 2023 after the next longterm supported
kernel is out.

Cc: Sekhar Nori <nsekhar@ti.com>
Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

ARM: defconfig: remove stale CONFIG_ZBOOT_ROM entries

The default is always 0x0 after commit 39c3e304567a ("ARM: 8984/1:
Kconfig: set default ZBOOT_ROM_TEXT/BSS value to 0x0"), so any
defconfig file

ARM: defconfig: remove stale CONFIG_ZBOOT_ROM entries

The default is always 0x0 after commit 39c3e304567a ("ARM: 8984/1:
Kconfig: set default ZBOOT_ROM_TEXT/BSS value to 0x0"), so any
defconfig file that has these two lines can now drop them to reduce
the diff against the 'make savedefconfig' version.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

ARM: refresh defconfig files

A lot of Kconfig options have changed over the years, and we tend
to not do a blind 'make defconfig' to refresh the files, to ensure
we catch options that should not hav

ARM: refresh defconfig files

A lot of Kconfig options have changed over the years, and we tend
to not do a blind 'make defconfig' to refresh the files, to ensure
we catch options that should not have gone away.

I used some a bit of scripting to only rework the bits where an
option moved around in any of the defconfig files, without also
dropping any of the other lines, to make it clearer which options
we no longer have.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

arch: Remove references to CONFIG_NFSD_V3 in the default configs

CONFIG_NFSD_V3 has been removed. NFSD support for NFSv3 can no
longer be disabled.

Signed-off-by: Chuck Lever <chuck.lever@oracle.co

arch: Remove references to CONFIG_NFSD_V3 in the default configs

CONFIG_NFSD_V3 has been removed. NFSD support for NFSv3 can no
longer be disabled.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

show more ...

drm/bridge: dumb-vga-dac: Rename driver to simple-bridge

The dumb-vga-dac driver can support simple DRM bridges without being
limited to VGA DACs. Rename it to simple-bridge.

Signed-off-by: Laurent

drm/bridge: dumb-vga-dac: Rename driver to simple-bridge

The dumb-vga-dac driver can support simple DRM bridges without being
limited to VGA DACs. Rename it to simple-bridge.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-12-laurent.pinchart@ideasonboard.com

show more ...

ARM: configs: Cleanup old Kconfig options

CONFIG_MMC_BLOCK_BOUNCE is gone since commit c3dccb74be28 ("mmc: core:
Delete bounce buffer Kconfig option").

CONFIG_LBDAF is gone since commit 72deb455b5e

ARM: configs: Cleanup old Kconfig options

CONFIG_MMC_BLOCK_BOUNCE is gone since commit c3dccb74be28 ("mmc: core:
Delete bounce buffer Kconfig option").

CONFIG_LBDAF is gone since commit 72deb455b5ec ("block: remove
CONFIG_LBDAF").

CONFIG_IOSCHED_DEADLINE and CONFIG_IOSCHED_CFQ are gone since
commit f382fb0bcef4 ("block: remove legacy IO schedulers").

The IOSCHED_DEADLINE was replaced by MQ_IOSCHED_DEADLINE and it will be
now enabled by default (along with MQ_IOSCHED_KYBER).

The IOSCHED_BFQ seems to replace IOSCHED_CFQ so select it in configs
previously choosing the latter.

CONFIG_CROSS_COMPILE is gone since commit f1089c92da79 ("kbuild: remove
CONFIG_CROSS_COMPILE support").

Link: https://lore.kernel.org/r/20200130195525.4525-2-krzk@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>

show more ...

ARM: davinci_all_defconfig: enable GPIO backlight

DA850 EVM has been converted to use GPIO backlight device
for display backlight GPIO control.

Enable the GPIO backlight module in davinci_all_defco

ARM: davinci_all_defconfig: enable GPIO backlight

DA850 EVM has been converted to use GPIO backlight device
for display backlight GPIO control.

Enable the GPIO backlight module in davinci_all_defconfig
to keep backlight support working.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
[nsekhar@ti.com: edits to commit message for context]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

show more ...

arm64/ARM: configs: Change CONFIG_REMOTEPROC from m to y

Commit 6334150e9a36 ("remoteproc: don't allow modular build")
changes CONFIG_REMOTEPROC to a boolean from a tristate config
option which inhi

arm64/ARM: configs: Change CONFIG_REMOTEPROC from m to y

Commit 6334150e9a36 ("remoteproc: don't allow modular build")
changes CONFIG_REMOTEPROC to a boolean from a tristate config
option which inhibits all defconfigs marking CONFIG_REMOTEPROC as
a module in compiling the remoteproc and dependent config options.

So fix the configs to have CONFIG_REMOTEPROC built in.

Link: https://lore.kernel.org/r/20190920075946.13282-5-j-keerthy@ti.com
Fixes: 6334150e9a36 ("remoteproc: don't allow modular build")
Signed-off-by: Keerthy <j-keerthy@ti.com>
Acked-by: Will Deacon <will@kernel.org>
[olof: Fixed up all 4 occurrances in this one commit]
Signed-off-by: Olof Johansson <olof@lixom.net>

show more ...

ARM: davinci: support multiplatform build for ARM v5

Add modifications necessary to make davinci part of the ARM v5
multiplatform build.

Move the arch-specific configuration out of arch/arm/Kconfig

ARM: davinci: support multiplatform build for ARM v5

Add modifications necessary to make davinci part of the ARM v5
multiplatform build.

Move the arch-specific configuration out of arch/arm/Kconfig and
into mach-davinci/Kconfig. Remove the sub-menu for DaVinci
implementations (they'll be visible directly under the system type.
Select all necessary options not already selected by ARCH_MULTI_V5.
Update davinci_all_defconfig. Explicitly include the mach-specific
headers in mach-davinci/Makefile.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

ARM: davinci_all_defconfig: Enable CPUFREQ_DT

This sets CONFIG_CPUFREQ_DT=m in davinci_all_defconfig. This is used for
frequency scaling on device tree boards.

Signed-off-by: David Lechner <david@l

ARM: davinci_all_defconfig: Enable CPUFREQ_DT

This sets CONFIG_CPUFREQ_DT=m in davinci_all_defconfig. This is used for
frequency scaling on device tree boards.

Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

show more ...

mtd: rawnand: Clarify Kconfig entry MTD_NAND

MTD_NAND is large and encloses much more than what the symbol is
actually used for: raw NAND. Clarify the symbol by naming it
MTD_RAW_NAND instead.

Sign

mtd: rawnand: Clarify Kconfig entry MTD_NAND

MTD_NAND is large and encloses much more than what the symbol is
actually used for: raw NAND. Clarify the symbol by naming it
MTD_RAW_NAND instead.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

show more ...

ARM: davinci_all_defconfig: Update the audio options

Use the new options for default audio support.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>

ARM: davinci_all_defconfig: Update the audio options

Use the new options for default audio support.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

show more ...

ARM: davinci_all_defconfig: Enable Bluetooth

This enables Bluetooth modules in davinic_all_defconfig needed for LEGO
MINDSTORMS EV3.

Build CONFIG_SERIAL_DEV_BUS into the kernel since SERIAL_DEV_CTR

ARM: davinci_all_defconfig: Enable Bluetooth

This enables Bluetooth modules in davinic_all_defconfig needed for LEGO
MINDSTORMS EV3.

Build CONFIG_SERIAL_DEV_BUS into the kernel since SERIAL_DEV_CTRL_TTYPORT
requires it so.

Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

show more ...

ARM: davinci_all_defconfig: remove CONFIG_DAVINCI_RESET_CLOCKS

This removes CONFIG_DAVINCI_RESET_CLOCKS. The option has been removed from
the kernel.

Signed-off-by: David Lechner <david@lechnology.

ARM: davinci_all_defconfig: remove CONFIG_DAVINCI_RESET_CLOCKS

This removes CONFIG_DAVINCI_RESET_CLOCKS. The option has been removed from
the kernel.

Signed-off-by: David Lechner <david@lechnology.com>
Reviewed-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

show more ...

ARM: davinci_all_defconfig: set CONFIG_BACKLIGHT_PWM=m

The da850-evm came with an LCD with a backlight tied to a pwm. This
enables CONFIG_BACKLIGHT_PWM as a module so the PWM backlight can be
used t

ARM: davinci_all_defconfig: set CONFIG_BACKLIGHT_PWM=m

The da850-evm came with an LCD with a backlight tied to a pwm. This
enables CONFIG_BACKLIGHT_PWM as a module so the PWM backlight can be
used to maintain brightness control of the backlight.

Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

show more ...

ARM: davinci_all_defconfig: enable support for remoteproc drivers

Enable the remoteproc framework and the da8xx remoteproc driver by
default in the davinci defconfig.

Signed-off-by: Bartosz Golasze

ARM: davinci_all_defconfig: enable support for remoteproc drivers

Enable the remoteproc framework and the da8xx remoteproc driver by
default in the davinci defconfig.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

show more ...

ARM: davinci_all_defconfig: set CONFIG_DAVINCI_WATCHDOG=y

This changes CONFIG_DAVINCI_WATCHDOG from a module to a compiled-in
option. Since the reset function has been moved out of the mach code in

ARM: davinci_all_defconfig: set CONFIG_DAVINCI_WATCHDOG=y

This changes CONFIG_DAVINCI_WATCHDOG from a module to a compiled-in
option. Since the reset function has been moved out of the mach code in
commit 94f2e94514e5 ("ARM: davinci: remove watchdog reset") and into the
watchdog driver, devices cannot reboot unless the watchdog driver is
loaded, so make it a compiled-in option so that we can always reboot, even
when modules are not loaded.

Cc: Sekhar Nori <nsekhar@ti.com>
Suggested-by: Adam Ford <aford173@gmail.com>
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

show more ...

ARM: davinci_all_defconfig: enable SYSCON_REBOOT_MODE

This enables SYSCON_REBOOT_MODE as a module. This is used by LEGO
MINDSTORMS EV3 to reboot into a special firmware update mode.

Signed-off-by:

ARM: davinci_all_defconfig: enable SYSCON_REBOOT_MODE

This enables SYSCON_REBOOT_MODE as a module. This is used by LEGO
MINDSTORMS EV3 to reboot into a special firmware update mode.

Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

show more ...

ARM: davinci_all_defconfig: enable support for USB network adaptors

Enables CONFIG_USB_USBNET so that well known USB network adapters
can enumerate as network interfaces.

Signed-off-by: Aparna Bala

ARM: davinci_all_defconfig: enable support for USB network adaptors

Enables CONFIG_USB_USBNET so that well known USB network adapters
can enumerate as network interfaces.

Signed-off-by: Aparna Balasubramanian <aparnab@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

show more ...

ARM: davinci_all_defconfig: enable CMA options

Enable the CMA and DMA_CMA Kconfig options by default for
Davinci platforms. Davinci remoteproc driver is one of the
modules that depends on these opti

ARM: davinci_all_defconfig: enable CMA options

Enable the CMA and DMA_CMA Kconfig options by default for
Davinci platforms. Davinci remoteproc driver is one of the
modules that depends on these options, and this allows the
driver to be made visible for selection with menuconfig.

Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

show more ...

ARM: davinci_all_defconfig: enable MTD_CMDLINE_PARTS

There is some disagreement between the partition table map in Linux
for the DA850-EVM and the corresponding partition map in U-Boot.
To prevent b

ARM: davinci_all_defconfig: enable MTD_CMDLINE_PARTS

There is some disagreement between the partition table map in Linux
for the DA850-EVM and the corresponding partition map in U-Boot.
To prevent breaking the Kernel, this patch enables MTD_CMDLINE_PARTS
which will allow the U-Boot to pass the partition map so future partitions
match without breaking backwards compatibility.

While at it, also sync to savedefconfig which leads to removal of
CONFIG_MMC_BLOCK_BOUNCE.

Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

show more ...

ARM: davinci_all_defconfig: enable tinydrm and ST7586

This enables the tinydrm and ST7586 panel modules used by the display
on LEGO MINDSTORMS EV3.

Signed-off-by: David Lechner <david@lechnology.co

ARM: davinci_all_defconfig: enable tinydrm and ST7586

This enables the tinydrm and ST7586 panel modules used by the display
on LEGO MINDSTORMS EV3.

Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

show more ...

ARM: davinci_all_defconfig: enable USB CDC NCM gadget

Enable USB CDC NCM gadget module in davinci_all_defconfig
to make it easier to use it on these devices.

Signed-off-by: Sekhar Nori <nsekhar@ti.

ARM: davinci_all_defconfig: enable USB CDC NCM gadget

Enable USB CDC NCM gadget module in davinci_all_defconfig
to make it easier to use it on these devices.

Signed-off-by: Sekhar Nori <nsekhar@ti.com>

show more ...