| 5607d1e7 | 13-Dec-2024 |
Marek Vasut <marex@denx.de> |
ARM: dts: stm32: Swap USART3 and UART8 alias on STM32MP15xx DHCOM SoM
[ Upstream commit 479b8227ffc433929ba49200182b6383569f9615 ]
Swap USART3 and UART8 aliases on STM32MP15xx DHCOM SoM,
make sure
ARM: dts: stm32: Swap USART3 and UART8 alias on STM32MP15xx DHCOM SoM
[ Upstream commit 479b8227ffc433929ba49200182b6383569f9615 ]
Swap USART3 and UART8 aliases on STM32MP15xx DHCOM SoM,
make sure UART8 is listed first, USART3 second, because
the UART8 is labeled as UART2 on the SoM pinout, while
USART3 is labeled as UART3 on the SoM pinout.
Fixes: 34e0c7847dcf ("ARM: dts: stm32: Add DH Electronics DHCOM STM32MP1 SoM and PDK2 board")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
show more ...
|
| 4c757f6b | 12-Jul-2023 |
Etienne Carriere <etienne.carriere@foss.st.com> |
ARM: dts: stm32: add SCMI PMIC regulators on stm32mp135f-dk board
Since OP-TEE release tag 3.22.0, OP-TEE SCMI service for STM32MP13x
SoC family exposes PMIC voltage regulators. This change defines
ARM: dts: stm32: add SCMI PMIC regulators on stm32mp135f-dk board
Since OP-TEE release tag 3.22.0, OP-TEE SCMI service for STM32MP13x
SoC family exposes PMIC voltage regulators. This change defines
them in the platform DTS file and removes the fixed regulators that
were previously defined to abstract them before OP-TEE firmware was
ready.
Signed-off-by: Etienne Carriere <etienne.carriere@foss.st.com>
Signed-off-by: Pascal Paillet <p.paillet@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
show more ...
|
| fb266d2d | 12-Jul-2023 |
Etienne Carriere <etienne.carriere@foss.st.com> |
ARM: dts: stm32: STM32MP13x SoC exposes SCMI regulators
Updates STM32MP13x SoC DTSI file to define the SoC voltage regulators
exposed by OP-TEE SCMI service and remove the fixed regulator
abstractio
ARM: dts: stm32: STM32MP13x SoC exposes SCMI regulators
Updates STM32MP13x SoC DTSI file to define the SoC voltage regulators
exposed by OP-TEE SCMI service and remove the fixed regulator
abstraction previously used until OP-TEE OS firmware embeds the
service which it does since its release tag 3.22.0.
Signed-off-by: Etienne Carriere <etienne.carriere@foss.st.com>
Signed-off-by: Pascal Paillet <p.paillet@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
show more ...
|
| 10a970bc | 16-Aug-2023 |
Dario Binacchi <dario.binacchi@amarulasolutions.com> |
ARM: dts: stm32: support display on stm32f746-disco board
Add support to Rocktech RK043FN48H display on stm32f746-disco board.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Re
ARM: dts: stm32: support display on stm32f746-disco board
Add support to Rocktech RK043FN48H display on stm32f746-disco board.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Raphaël Gallais-Pou <raphael.gallais-pou@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
show more ...
|
| e4e72409 | 14-Aug-2023 |
Dario Binacchi <dario.binacchi@amarulasolutions.com> |
ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f746-disco
In the schematics of document UM1907, the power supply for the micro SD
card is the same 3v3 voltage that is used to power other devic
ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f746-disco
In the schematics of document UM1907, the power supply for the micro SD
card is the same 3v3 voltage that is used to power other devices on the
board. By generalizing the name of the voltage regulator, it can be
referenced by other nodes in the device tree without creating
misunderstandings.
This patch is preparatory for future developments.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
show more ...
|
| ba287d1a | 14-Aug-2023 |
Dario Binacchi <dario.binacchi@amarulasolutions.com> |
ARM: dts: stm32: add pin map for LTDC on stm32f7
Add pin configurations for using LTDC (LCD-tft Display Controller) on
stm32f746-disco board.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulaso
ARM: dts: stm32: add pin map for LTDC on stm32f7
Add pin configurations for using LTDC (LCD-tft Display Controller) on
stm32f746-disco board.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Raphaël Gallais-Pou <raphael.gallais-pou@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
show more ...
|
| 008ef8b3 | 14-Aug-2023 |
Dario Binacchi <dario.binacchi@amarulasolutions.com> |
ARM: dts: stm32: add ltdc support on stm32f746 MCU
Add LTDC (Lcd-tft Display Controller) support.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Raphaël Gallais-Po
ARM: dts: stm32: add ltdc support on stm32f746 MCU
Add LTDC (Lcd-tft Display Controller) support.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Raphaël Gallais-Pou <raphael.gallais-pou@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
show more ...
|
| 06113b7a | 08-Aug-2023 |
Patrice Chotard <patrice.chotard@foss.st.com> |
ARM: dts: st: Add gpio-ranges for stm32f769-pinctrl
Since commit 913a956c4363 ("pinctrl: stm32: use dynamic allocation
of GPIO base"), it's impossible to retrieve gpios from phandle,
for example, mm
ARM: dts: st: Add gpio-ranges for stm32f769-pinctrl
Since commit 913a956c4363 ("pinctrl: stm32: use dynamic allocation
of GPIO base"), it's impossible to retrieve gpios from phandle,
for example, mmc driver can't retrieve cd-gpios.
Add missing gpio-ranges properties to fix it.
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
show more ...
|
| 756065e3 | 08-Aug-2023 |
Patrice Chotard <patrice.chotard@foss.st.com> |
ARM: dts: st: Add gpio-ranges for stm32f746-pinctrl
Since commit 913a956c4363 ("pinctrl: stm32: use dynamic allocation
of GPIO base"), it's impossible to retrieve gpios from phandle,
for example, mm
ARM: dts: st: Add gpio-ranges for stm32f746-pinctrl
Since commit 913a956c4363 ("pinctrl: stm32: use dynamic allocation
of GPIO base"), it's impossible to retrieve gpios from phandle,
for example, mmc driver can't retrieve cd-gpios.
Add missing gpio-ranges properties to fix it.
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
show more ...
|
| a35f08a7 | 30-Jul-2023 |
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> |
ARM: dts: st: stm32mp157c-emstamp: correct regulator-active-discharge
The "regulator-active-discharge" property is uint32, not boolean:
stm32mp157c-emsbc-argon.dtb: stpmic@33: regulators:pwr_sw1:
ARM: dts: st: stm32mp157c-emstamp: correct regulator-active-discharge
The "regulator-active-discharge" property is uint32, not boolean:
stm32mp157c-emsbc-argon.dtb: stpmic@33: regulators:pwr_sw1:regulator-active-discharge: True is not of type 'array'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
show more ...
|
| efbb7f91 | 30-Jul-2023 |
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> |
ARM: dts: st: stm32mp157c-emstamp: drop incorrect vref_ddr property
The STPMIC1 PMIC vref_ddr regulator does not support over-current
protection, according to bindings and Linux driver:
stm32mp15
ARM: dts: st: stm32mp157c-emstamp: drop incorrect vref_ddr property
The STPMIC1 PMIC vref_ddr regulator does not support over-current
protection, according to bindings and Linux driver:
stm32mp157c-emsbc-argon.dtb: stpmic@33: regulators:vref_ddr: 'regulator-over-current-protection' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
show more ...
|
| a77d289b | 17-Jul-2023 |
Pascal Paillet <p.paillet@foss.st.com> |
ARM: dts: stm32: fix dts check warnings on stm32mp15-scmi
Fix dts check warnings on stm32mp15-scmi reported by
arm,scmi.yaml.
Signed-off-by: Pascal Paillet <p.paillet@foss.st.com>
Signed-off-by: Al
ARM: dts: stm32: fix dts check warnings on stm32mp15-scmi
Fix dts check warnings on stm32mp15-scmi reported by
arm,scmi.yaml.
Signed-off-by: Pascal Paillet <p.paillet@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
show more ...
|
| 2f38de94 | 11-Jul-2023 |
Marek Vasut <marex@denx.de> |
ARM: dts: stm32: Add missing detach mailbox for DHCOR SoM
Add missing "detach" mailbox to this board to permit the CPU to inform
the remote processor on a detach. This signal allows the remote proce
ARM: dts: stm32: Add missing detach mailbox for DHCOR SoM
Add missing "detach" mailbox to this board to permit the CPU to inform
the remote processor on a detach. This signal allows the remote processor
firmware to stop IPC communication and to reinitialize the resources for
a re-attach.
Without this mailbox, detach is not possible and kernel log contains the
following warning to, so make sure all the STM32MP15xx platform DTs are
in sync regarding the mailboxes to fix the detach issue and the warning:
"
stm32-rproc 10000000.m4: mbox_request_channel_byname() could not locate channel named "detach"
"
Fixes: 6257dfc1c412 ("ARM: dts: stm32: Add coprocessor detach mbox on stm32mp15x-dkx boards")
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
show more ...
|
| deb7edbc | 11-Jul-2023 |
Marek Vasut <marex@denx.de> |
ARM: dts: stm32: Add missing detach mailbox for DHCOM SoM
Add missing "detach" mailbox to this board to permit the CPU to inform
the remote processor on a detach. This signal allows the remote proce
ARM: dts: stm32: Add missing detach mailbox for DHCOM SoM
Add missing "detach" mailbox to this board to permit the CPU to inform
the remote processor on a detach. This signal allows the remote processor
firmware to stop IPC communication and to reinitialize the resources for
a re-attach.
Without this mailbox, detach is not possible and kernel log contains the
following warning to, so make sure all the STM32MP15xx platform DTs are
in sync regarding the mailboxes to fix the detach issue and the warning:
"
stm32-rproc 10000000.m4: mbox_request_channel_byname() could not locate channel named "detach"
"
Fixes: 6257dfc1c412 ("ARM: dts: stm32: Add coprocessor detach mbox on stm32mp15x-dkx boards")
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
show more ...
|