kbuild: unify vdso_install rules

[ Upstream commit 56769ba4b297a629148eb24d554aef72d1ddfd9e ]

Currently, there is no standard implementation for vdso_install,
leading to various issues:

1. Code d

kbuild: unify vdso_install rules

[ Upstream commit 56769ba4b297a629148eb24d554aef72d1ddfd9e ]

Currently, there is no standard implementation for vdso_install,
leading to various issues:

1. Code duplication

Many architectures duplicate similar code just for copying files
to the install destination.

Some architectures (arm, sparc, x86) create build-id symlinks,
introducing more code duplication.

2. Unintended updates of in-tree build artifacts

The vdso_install rule depends on the vdso files to install.
It may update in-tree build artifacts. This can be problematic,
as explained in commit 19514fc665ff ("arm, kbuild: make
"make install" not depend on vmlinux").

3. Broken code in some architectures

Makefile code is often copied from one architecture to another
without proper adaptation.

'make vdso_install' for parisc does not work.

'make vdso_install' for s390 installs vdso64, but not vdso32.

To address these problems, this commit introduces a generic vdso_install
rule.

Architectures that support vdso_install need to define vdso-install-y
in arch/*/Makefile. vdso-install-y lists the files to install.

For example, arch/x86/Makefile looks like this:

vdso-install-$(CONFIG_X86_64) += arch/x86/entry/vdso/vdso64.so.dbg
vdso-install-$(CONFIG_X86_X32_ABI) += arch/x86/entry/vdso/vdsox32.so.dbg
vdso-install-$(CONFIG_X86_32) += arch/x86/entry/vdso/vdso32.so.dbg
vdso-install-$(CONFIG_IA32_EMULATION) += arch/x86/entry/vdso/vdso32.so.dbg

These files will be installed to $(MODLIB)/vdso/ with the .dbg suffix,
if exists, stripped away.

vdso-install-y can optionally take the second field after the colon
separator. This is needed because some architectures install a vdso
file as a different base name.

The following is a snippet from arch/arm64/Makefile.

vdso-install-$(CONFIG_COMPAT_VDSO) += arch/arm64/kernel/vdso32/vdso.so.dbg:vdso32.so

This will rename vdso.so.dbg to vdso32.so during installation. If such
architectures change their implementation so that the base names match,
this workaround will go away.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Sven Schnelle <svens@linux.ibm.com> # s390
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Reviewed-by: Guo Ren <guoren@kernel.org>
Acked-by: Helge Deller <deller@gmx.de> # parisc
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Stable-dep-of: fc2f5f10f9bc ("s390/vdso: Create .build-id links for unstripped vdso files")
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

kbuild: unify vdso_install rules

[ Upstream commit 56769ba4b297a629148eb24d554aef72d1ddfd9e ]

Currently, there is no standard implementation for vdso_install,
leading to various issues:

1. Code d

kbuild: unify vdso_install rules

[ Upstream commit 56769ba4b297a629148eb24d554aef72d1ddfd9e ]

Currently, there is no standard implementation for vdso_install,
leading to various issues:

1. Code duplication

Many architectures duplicate similar code just for copying files
to the install destination.

Some architectures (arm, sparc, x86) create build-id symlinks,
introducing more code duplication.

2. Unintended updates of in-tree build artifacts

The vdso_install rule depends on the vdso files to install.
It may update in-tree build artifacts. This can be problematic,
as explained in commit 19514fc665ff ("arm, kbuild: make
"make install" not depend on vmlinux").

3. Broken code in some architectures

Makefile code is often copied from one architecture to another
without proper adaptation.

'make vdso_install' for parisc does not work.

'make vdso_install' for s390 installs vdso64, but not vdso32.

To address these problems, this commit introduces a generic vdso_install
rule.

Architectures that support vdso_install need to define vdso-install-y
in arch/*/Makefile. vdso-install-y lists the files to install.

For example, arch/x86/Makefile looks like this:

vdso-install-$(CONFIG_X86_64) += arch/x86/entry/vdso/vdso64.so.dbg
vdso-install-$(CONFIG_X86_X32_ABI) += arch/x86/entry/vdso/vdsox32.so.dbg
vdso-install-$(CONFIG_X86_32) += arch/x86/entry/vdso/vdso32.so.dbg
vdso-install-$(CONFIG_IA32_EMULATION) += arch/x86/entry/vdso/vdso32.so.dbg

These files will be installed to $(MODLIB)/vdso/ with the .dbg suffix,
if exists, stripped away.

vdso-install-y can optionally take the second field after the colon
separator. This is needed because some architectures install a vdso
file as a different base name.

The following is a snippet from arch/arm64/Makefile.

vdso-install-$(CONFIG_COMPAT_VDSO) += arch/arm64/kernel/vdso32/vdso.so.dbg:vdso32.so

This will rename vdso.so.dbg to vdso32.so during installation. If such
architectures change their implementation so that the base names match,
this workaround will go away.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Sven Schnelle <svens@linux.ibm.com> # s390
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Reviewed-by: Guo Ren <guoren@kernel.org>
Acked-by: Helge Deller <deller@gmx.de> # parisc
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Stable-dep-of: fc2f5f10f9bc ("s390/vdso: Create .build-id links for unstripped vdso files")
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

kbuild: unify vdso_install rules

[ Upstream commit 56769ba4b297a629148eb24d554aef72d1ddfd9e ]

Currently, there is no standard implementation for vdso_install,
leading to various issues:

1. Code d

kbuild: unify vdso_install rules

[ Upstream commit 56769ba4b297a629148eb24d554aef72d1ddfd9e ]

Currently, there is no standard implementation for vdso_install,
leading to various issues:

1. Code duplication

Many architectures duplicate similar code just for copying files
to the install destination.

Some architectures (arm, sparc, x86) create build-id symlinks,
introducing more code duplication.

2. Unintended updates of in-tree build artifacts

The vdso_install rule depends on the vdso files to install.
It may update in-tree build artifacts. This can be problematic,
as explained in commit 19514fc665ff ("arm, kbuild: make
"make install" not depend on vmlinux").

3. Broken code in some architectures

Makefile code is often copied from one architecture to another
without proper adaptation.

'make vdso_install' for parisc does not work.

'make vdso_install' for s390 installs vdso64, but not vdso32.

To address these problems, this commit introduces a generic vdso_install
rule.

Architectures that support vdso_install need to define vdso-install-y
in arch/*/Makefile. vdso-install-y lists the files to install.

For example, arch/x86/Makefile looks like this:

vdso-install-$(CONFIG_X86_64) += arch/x86/entry/vdso/vdso64.so.dbg
vdso-install-$(CONFIG_X86_X32_ABI) += arch/x86/entry/vdso/vdsox32.so.dbg
vdso-install-$(CONFIG_X86_32) += arch/x86/entry/vdso/vdso32.so.dbg
vdso-install-$(CONFIG_IA32_EMULATION) += arch/x86/entry/vdso/vdso32.so.dbg

These files will be installed to $(MODLIB)/vdso/ with the .dbg suffix,
if exists, stripped away.

vdso-install-y can optionally take the second field after the colon
separator. This is needed because some architectures install a vdso
file as a different base name.

The following is a snippet from arch/arm64/Makefile.

vdso-install-$(CONFIG_COMPAT_VDSO) += arch/arm64/kernel/vdso32/vdso.so.dbg:vdso32.so

This will rename vdso.so.dbg to vdso32.so during installation. If such
architectures change their implementation so that the base names match,
this workaround will go away.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Sven Schnelle <svens@linux.ibm.com> # s390
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Reviewed-by: Guo Ren <guoren@kernel.org>
Acked-by: Helge Deller <deller@gmx.de> # parisc
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Stable-dep-of: fc2f5f10f9bc ("s390/vdso: Create .build-id links for unstripped vdso files")
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

kbuild: unify vdso_install rules

[ Upstream commit 56769ba4b297a629148eb24d554aef72d1ddfd9e ]

Currently, there is no standard implementation for vdso_install,
leading to various issues:

1. Code d

kbuild: unify vdso_install rules

[ Upstream commit 56769ba4b297a629148eb24d554aef72d1ddfd9e ]

Currently, there is no standard implementation for vdso_install,
leading to various issues:

1. Code duplication

Many architectures duplicate similar code just for copying files
to the install destination.

Some architectures (arm, sparc, x86) create build-id symlinks,
introducing more code duplication.

2. Unintended updates of in-tree build artifacts

The vdso_install rule depends on the vdso files to install.
It may update in-tree build artifacts. This can be problematic,
as explained in commit 19514fc665ff ("arm, kbuild: make
"make install" not depend on vmlinux").

3. Broken code in some architectures

Makefile code is often copied from one architecture to another
without proper adaptation.

'make vdso_install' for parisc does not work.

'make vdso_install' for s390 installs vdso64, but not vdso32.

To address these problems, this commit introduces a generic vdso_install
rule.

Architectures that support vdso_install need to define vdso-install-y
in arch/*/Makefile. vdso-install-y lists the files to install.

For example, arch/x86/Makefile looks like this:

vdso-install-$(CONFIG_X86_64) += arch/x86/entry/vdso/vdso64.so.dbg
vdso-install-$(CONFIG_X86_X32_ABI) += arch/x86/entry/vdso/vdsox32.so.dbg
vdso-install-$(CONFIG_X86_32) += arch/x86/entry/vdso/vdso32.so.dbg
vdso-install-$(CONFIG_IA32_EMULATION) += arch/x86/entry/vdso/vdso32.so.dbg

These files will be installed to $(MODLIB)/vdso/ with the .dbg suffix,
if exists, stripped away.

vdso-install-y can optionally take the second field after the colon
separator. This is needed because some architectures install a vdso
file as a different base name.

The following is a snippet from arch/arm64/Makefile.

vdso-install-$(CONFIG_COMPAT_VDSO) += arch/arm64/kernel/vdso32/vdso.so.dbg:vdso32.so

This will rename vdso.so.dbg to vdso32.so during installation. If such
architectures change their implementation so that the base names match,
this workaround will go away.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Sven Schnelle <svens@linux.ibm.com> # s390
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Reviewed-by: Guo Ren <guoren@kernel.org>
Acked-by: Helge Deller <deller@gmx.de> # parisc
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Stable-dep-of: fc2f5f10f9bc ("s390/vdso: Create .build-id links for unstripped vdso files")
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

kbuild: unify vdso_install rules

[ Upstream commit 56769ba4b297a629148eb24d554aef72d1ddfd9e ]

Currently, there is no standard implementation for vdso_install,
leading to various issues:

1. Code d

kbuild: unify vdso_install rules

[ Upstream commit 56769ba4b297a629148eb24d554aef72d1ddfd9e ]

Currently, there is no standard implementation for vdso_install,
leading to various issues:

1. Code duplication

Many architectures duplicate similar code just for copying files
to the install destination.

Some architectures (arm, sparc, x86) create build-id symlinks,
introducing more code duplication.

2. Unintended updates of in-tree build artifacts

The vdso_install rule depends on the vdso files to install.
It may update in-tree build artifacts. This can be problematic,
as explained in commit 19514fc665ff ("arm, kbuild: make
"make install" not depend on vmlinux").

3. Broken code in some architectures

Makefile code is often copied from one architecture to another
without proper adaptation.

'make vdso_install' for parisc does not work.

'make vdso_install' for s390 installs vdso64, but not vdso32.

To address these problems, this commit introduces a generic vdso_install
rule.

Architectures that support vdso_install need to define vdso-install-y
in arch/*/Makefile. vdso-install-y lists the files to install.

For example, arch/x86/Makefile looks like this:

vdso-install-$(CONFIG_X86_64) += arch/x86/entry/vdso/vdso64.so.dbg
vdso-install-$(CONFIG_X86_X32_ABI) += arch/x86/entry/vdso/vdsox32.so.dbg
vdso-install-$(CONFIG_X86_32) += arch/x86/entry/vdso/vdso32.so.dbg
vdso-install-$(CONFIG_IA32_EMULATION) += arch/x86/entry/vdso/vdso32.so.dbg

These files will be installed to $(MODLIB)/vdso/ with the .dbg suffix,
if exists, stripped away.

vdso-install-y can optionally take the second field after the colon
separator. This is needed because some architectures install a vdso
file as a different base name.

The following is a snippet from arch/arm64/Makefile.

vdso-install-$(CONFIG_COMPAT_VDSO) += arch/arm64/kernel/vdso32/vdso.so.dbg:vdso32.so

This will rename vdso.so.dbg to vdso32.so during installation. If such
architectures change their implementation so that the base names match,
this workaround will go away.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Sven Schnelle <svens@linux.ibm.com> # s390
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Reviewed-by: Guo Ren <guoren@kernel.org>
Acked-by: Helge Deller <deller@gmx.de> # parisc
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Stable-dep-of: fc2f5f10f9bc ("s390/vdso: Create .build-id links for unstripped vdso files")
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

kbuild: unify vdso_install rules

[ Upstream commit 56769ba4b297a629148eb24d554aef72d1ddfd9e ]

Currently, there is no standard implementation for vdso_install,
leading to various issues:

1. Code d

kbuild: unify vdso_install rules

[ Upstream commit 56769ba4b297a629148eb24d554aef72d1ddfd9e ]

Currently, there is no standard implementation for vdso_install,
leading to various issues:

1. Code duplication

Many architectures duplicate similar code just for copying files
to the install destination.

Some architectures (arm, sparc, x86) create build-id symlinks,
introducing more code duplication.

2. Unintended updates of in-tree build artifacts

The vdso_install rule depends on the vdso files to install.
It may update in-tree build artifacts. This can be problematic,
as explained in commit 19514fc665ff ("arm, kbuild: make
"make install" not depend on vmlinux").

3. Broken code in some architectures

Makefile code is often copied from one architecture to another
without proper adaptation.

'make vdso_install' for parisc does not work.

'make vdso_install' for s390 installs vdso64, but not vdso32.

To address these problems, this commit introduces a generic vdso_install
rule.

Architectures that support vdso_install need to define vdso-install-y
in arch/*/Makefile. vdso-install-y lists the files to install.

For example, arch/x86/Makefile looks like this:

vdso-install-$(CONFIG_X86_64) += arch/x86/entry/vdso/vdso64.so.dbg
vdso-install-$(CONFIG_X86_X32_ABI) += arch/x86/entry/vdso/vdsox32.so.dbg
vdso-install-$(CONFIG_X86_32) += arch/x86/entry/vdso/vdso32.so.dbg
vdso-install-$(CONFIG_IA32_EMULATION) += arch/x86/entry/vdso/vdso32.so.dbg

These files will be installed to $(MODLIB)/vdso/ with the .dbg suffix,
if exists, stripped away.

vdso-install-y can optionally take the second field after the colon
separator. This is needed because some architectures install a vdso
file as a different base name.

The following is a snippet from arch/arm64/Makefile.

vdso-install-$(CONFIG_COMPAT_VDSO) += arch/arm64/kernel/vdso32/vdso.so.dbg:vdso32.so

This will rename vdso.so.dbg to vdso32.so during installation. If such
architectures change their implementation so that the base names match,
this workaround will go away.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Sven Schnelle <svens@linux.ibm.com> # s390
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Reviewed-by: Guo Ren <guoren@kernel.org>
Acked-by: Helge Deller <deller@gmx.de> # parisc
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Stable-dep-of: fc2f5f10f9bc ("s390/vdso: Create .build-id links for unstripped vdso files")
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

kbuild: unify vdso_install rules

[ Upstream commit 56769ba4b297a629148eb24d554aef72d1ddfd9e ]

Currently, there is no standard implementation for vdso_install,
leading to various issues:

1. Code d

kbuild: unify vdso_install rules

[ Upstream commit 56769ba4b297a629148eb24d554aef72d1ddfd9e ]

Currently, there is no standard implementation for vdso_install,
leading to various issues:

1. Code duplication

Many architectures duplicate similar code just for copying files
to the install destination.

Some architectures (arm, sparc, x86) create build-id symlinks,
introducing more code duplication.

2. Unintended updates of in-tree build artifacts

The vdso_install rule depends on the vdso files to install.
It may update in-tree build artifacts. This can be problematic,
as explained in commit 19514fc665ff ("arm, kbuild: make
"make install" not depend on vmlinux").

3. Broken code in some architectures

Makefile code is often copied from one architecture to another
without proper adaptation.

'make vdso_install' for parisc does not work.

'make vdso_install' for s390 installs vdso64, but not vdso32.

To address these problems, this commit introduces a generic vdso_install
rule.

Architectures that support vdso_install need to define vdso-install-y
in arch/*/Makefile. vdso-install-y lists the files to install.

For example, arch/x86/Makefile looks like this:

vdso-install-$(CONFIG_X86_64) += arch/x86/entry/vdso/vdso64.so.dbg
vdso-install-$(CONFIG_X86_X32_ABI) += arch/x86/entry/vdso/vdsox32.so.dbg
vdso-install-$(CONFIG_X86_32) += arch/x86/entry/vdso/vdso32.so.dbg
vdso-install-$(CONFIG_IA32_EMULATION) += arch/x86/entry/vdso/vdso32.so.dbg

These files will be installed to $(MODLIB)/vdso/ with the .dbg suffix,
if exists, stripped away.

vdso-install-y can optionally take the second field after the colon
separator. This is needed because some architectures install a vdso
file as a different base name.

The following is a snippet from arch/arm64/Makefile.

vdso-install-$(CONFIG_COMPAT_VDSO) += arch/arm64/kernel/vdso32/vdso.so.dbg:vdso32.so

This will rename vdso.so.dbg to vdso32.so during installation. If such
architectures change their implementation so that the base names match,
this workaround will go away.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Sven Schnelle <svens@linux.ibm.com> # s390
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Reviewed-by: Guo Ren <guoren@kernel.org>
Acked-by: Helge Deller <deller@gmx.de> # parisc
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Stable-dep-of: fc2f5f10f9bc ("s390/vdso: Create .build-id links for unstripped vdso files")
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

ARM: oxnas: remove OXNAS support

Due to lack of maintainance and stall of development for a few years now,
and since no new features will ever be added upstream, remove support
for OX810 and OX820 A

ARM: oxnas: remove OXNAS support

Due to lack of maintainance and stall of development for a few years now,
and since no new features will ever be added upstream, remove support
for OX810 and OX820 ARM support.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

ARM: add multi_v7_lpae_defconfig

The only missing configuration option preventing us from using
multi_v7_defconfig with the Raspberry Pi 4 is ARM_LPAE. It's needed as
the PCIe controller found on th

ARM: add multi_v7_lpae_defconfig

The only missing configuration option preventing us from using
multi_v7_defconfig with the Raspberry Pi 4 is ARM_LPAE. It's needed as
the PCIe controller found on the SoC depends on 64bit addressing, yet
can't be included as not all v7 boards support LPAE.

Introduce multi_v7_lpae_defconfig, built off multi_v7_defconfig, which will
avoid us having to duplicate and maintain multiple similar configurations.

Needless to say the Raspberry Pi 4 is not the only platform that can
benefit from this new configuration.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20230124110213.3221264-11-alexander.stein@ew.tq-group.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

ARM: 9287/1: Reduce __thumb2__ definition to crypto files that require it

Commit 1d2e9b67b001 ("ARM: 9265/1: pass -march= only to compiler") added
a __thumb2__ define to ASFLAGS to avoid build error

ARM: 9287/1: Reduce __thumb2__ definition to crypto files that require it

Commit 1d2e9b67b001 ("ARM: 9265/1: pass -march= only to compiler") added
a __thumb2__ define to ASFLAGS to avoid build errors in the crypto code,
which relies on __thumb2__ for preprocessing. Commit 59e2cf8d21e0 ("ARM:
9275/1: Drop '-mthumb' from AFLAGS_ISA") followed up on this by removing
-mthumb from AFLAGS so that __thumb2__ would not be defined when the
default target was ARMv7 or newer.

Unfortunately, the second commit's fix assumes that the toolchain
defaults to -mno-thumb / -marm, which is not the case for Debian's
arm-linux-gnueabihf target, which defaults to -mthumb:

$ echo | arm-linux-gnueabihf-gcc -dM -E - | grep __thumb
#define __thumb2__ 1
#define __thumb__ 1

This target is used by several CI systems, which will still see
redefined macro warnings, despite '-mthumb' not being present in the
flags:

<command-line>: warning: "__thumb2__" redefined
<built-in>: note: this is the location of the previous definition

Remove the global AFLAGS __thumb2__ define and move it to the crypto
folder where it is required by the imported OpenSSL algorithms; the rest
of the kernel should use the internal CONFIG_THUMB2_KERNEL symbol to
know whether or not Thumb2 is being used or not. Be sure that __thumb2__
is undefined first so that there are no macro redefinition warnings.

Link: https://github.com/ClangBuiltLinux/linux/issues/1772

Reported-by: "kernelci.org bot" <bot@kernelci.org>
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Fixes: 59e2cf8d21e0 ("ARM: 9275/1: Drop '-mthumb' from AFLAGS_ISA")
Fixes: 1d2e9b67b001 ("ARM: 9265/1: pass -march= only to compiler")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>

show more ...

ARM: s3c: remove all s3c24xx support

The platform was deprecated in commit 6a5e69c7ddea ("ARM: s3c: mark
as deprecated and schedule removal") and can be removed. This includes
all files that are exc

ARM: s3c: remove all s3c24xx support

The platform was deprecated in commit 6a5e69c7ddea ("ARM: s3c: mark
as deprecated and schedule removal") and can be removed. This includes
all files that are exclusively for s3c24xx and not shared with s3c64xx,
as well as the glue logic in Kconfig and the maintainer file entries.

Cc: Arnaud Patard <arnaud.patard@rtp-net.org>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Christer Weinigel <christer@weinigel.se>
Cc: Guillaume GOURAT <guillaume.gourat@nexvision.tv>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Simtec Linux Team <linux@simtec.co.uk>
Cc: openmoko-kernel@lists.openmoko.org
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

ARM: 9285/1: remove meaningless arch/arm/mach-rda/Makefile

You do not need to put Makefile if there is nothing to compile.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Russe

ARM: 9285/1: remove meaningless arch/arm/mach-rda/Makefile

You do not need to put Makefile if there is nothing to compile.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>

show more ...

ARM: iop32x: remove the platform

This was marked as unused in 5.19 and can now be removed

Cc: Lennert Buytenhek <kernel@wantstofly.org>
Cc: Martin Michlmayr <tbm@cyrius.com>
Acked-by: Dan Williams

ARM: iop32x: remove the platform

This was marked as unused in 5.19 and can now be removed

Cc: Lennert Buytenhek <kernel@wantstofly.org>
Cc: Martin Michlmayr <tbm@cyrius.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

ARM: cns3xxx: remove entire platform

cns3xxx was marked as unused a while ago, and gets removed
entirely now.

Acked-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Arnd Bergmann <arnd@arndb.d

ARM: cns3xxx: remove entire platform

cns3xxx was marked as unused a while ago, and gets removed
entirely now.

Acked-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

ARM: 9275/1: Drop '-mthumb' from AFLAGS_ISA

When building with CONFIG_THUMB2_KERNEL=y + a version of clang from
Debian using CROSS_COMPILE=arm-linux-gnueabihf-, the following warning
occurs frequent

ARM: 9275/1: Drop '-mthumb' from AFLAGS_ISA

When building with CONFIG_THUMB2_KERNEL=y + a version of clang from
Debian using CROSS_COMPILE=arm-linux-gnueabihf-, the following warning
occurs frequently:

<built-in>:383:9: warning: '__thumb2__' macro redefined [-Wmacro-redefined]
#define __thumb2__ 2
^
<built-in>:353:9: note: previous definition is here
#define __thumb2__ 1
^
1 warning generated.

Debian carries a downstream patch that changes the default CPU of the
arm-linux-gnueabihf target from 'arm1176jzf-s' (v6) to 'cortex-a7' (v7).
As a result, '-mthumb' defines both '__thumb__' and '__thumb2__'. The
define of '__thumb2__' via the command line was purposefully added to
catch a situation like this.

In a similar vein as commit 26b12e084bce ("ARM: 9264/1: only use
-mtp=cp15 for the compiler"), do not add '-mthumb' to AFLAGS_ISA, as it
is already passed to the assembler via '-Wa,-mthumb' and '__thumb2__' is
already defined for preprocessing.

Link: https://salsa.debian.org/pkg-llvm-team/llvm-toolchain/-/raw/622dbcbd40b316ed3905a2d25d9623544a06e6b1/debian/patches/930008-arm.diff

Fixes: 1d2e9b67b001 ("ARM: 9265/1: pass -march= only to compiler")
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>

show more ...

ARM: 9265/1: pass -march= only to compiler

When both -march= and -Wa,-march= are specified for assembler or
assembler-with-cpp sources, GCC and Clang will prefer the -Wa,-march=
value but Clang will

ARM: 9265/1: pass -march= only to compiler

When both -march= and -Wa,-march= are specified for assembler or
assembler-with-cpp sources, GCC and Clang will prefer the -Wa,-march=
value but Clang will warn that -march= is unused.

warning: argument unused during compilation: '-march=armv6k'
[-Wunused-command-line-argument]

This is the top group of warnings we observe when using clang to
assemble the kernel via `ARCH=arm make LLVM=1`.

Split the arch-y make variable into two, so that -march= flags only get
passed to the compiler, not the assembler. -D flags are added to
KBUILD_CPPFLAGS which is used for both C and assembler-with-cpp sources.

Clang is trying to warn that it doesn't support different values for
-march= and -Wa,-march= (like GCC does, but the kernel doesn't need this)
though the value of the preprocessor define __thumb2__ is based on
-march=. Make sure to re-set __thumb2__ via -D flag for assembler
sources now that we're no longer passing -march= to the assembler. Set
it to a different value than the preprocessor would for -march= in case
-march= gets accidentally re-added to KBUILD_AFLAGS in the future.
Thanks to Ard and Nathan for this suggestion.

Link: https://github.com/ClangBuiltLinux/linux/issues/1315
Link: https://github.com/ClangBuiltLinux/linux/issues/1587
Link: https://github.com/llvm/llvm-project/issues/55656

Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Suggested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>

show more ...

ARM: 9264/1: only use -mtp=cp15 for the compiler

Avoids an error from the assembler for CONFIG_THUMB2 kernels:

clang-15: error: hardware TLS register is not supported for the thumbv4t
sub-architect

ARM: 9264/1: only use -mtp=cp15 for the compiler

Avoids an error from the assembler for CONFIG_THUMB2 kernels:

clang-15: error: hardware TLS register is not supported for the thumbv4t
sub-architecture

This flag only makes sense to pass to the compiler, not the assembler.

Perhaps CFLAGS_ABI can be renamed to CPPFLAGS_ABI to reflect that they
will be passed to both the compiler and assembler for sources that
require pre-processing.

Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>

show more ...

ARM: 9262/1: remove lazy evaluation in Makefile

arch-y and tune-y used lazy evaluation since they used to contain

cc-option checks. They don't any longer, so just eagerly evaluate these
command lin

ARM: 9262/1: remove lazy evaluation in Makefile

arch-y and tune-y used lazy evaluation since they used to contain

cc-option checks. They don't any longer, so just eagerly evaluate these
command line flags.

Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>

show more ...

kbuild: remove head-y syntax

Kbuild puts the objects listed in head-y at the head of vmlinux.
Conventionally, we do this for head*.S, which contains the kernel entry
point.

A counter approach is to

kbuild: remove head-y syntax

Kbuild puts the objects listed in head-y at the head of vmlinux.
Conventionally, we do this for head*.S, which contains the kernel entry
point.

A counter approach is to control the section order by the linker script.
Actually, the code marked as __HEAD goes into the ".head.text" section,
which is placed before the normal ".text" section.

I do not know if both of them are needed. From the build system
perspective, head-y is not mandatory. If you can achieve the proper code
placement by the linker script only, it would be cleaner.

I collected the current head-y objects into head-object-list.txt. It is
a whitelist. My hope is it will be reduced in the long run.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>

show more ...

ARM: 9226/1: disable FDPIC ABI

When building with an arm-*-uclinuxfdpiceabi toolchain, the FDPIC ABI is
enabled by default but should not be used to build the kernel.
Therefore, pass -mno-fdpic if s

ARM: 9226/1: disable FDPIC ABI

When building with an arm-*-uclinuxfdpiceabi toolchain, the FDPIC ABI is
enabled by default but should not be used to build the kernel.
Therefore, pass -mno-fdpic if supported by the compiler.

Signed-off-by: Ben Wolsieffer <ben.wolsieffer@hefring.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>

show more ...

ARM: simplify machdirs/platdirs handling

There is only one plat-* directory left, and the MACHINE variable is
only used for the mach/*.h header path.

Simplify this by removing the checks for ARCH_M

ARM: simplify machdirs/platdirs handling

There is only one plat-* directory left, and the MACHINE variable is
only used for the mach/*.h header path.

Simplify this by removing the checks for ARCH_MULTIPLATFORM and
ARM_SINGLE_ARMV7M, and just adding the include directories for the
remaining three platforms manually.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

ARM: remove obsolete Makefile.boot infrastructure

There are a number of old Makefile.boot files that remain from the
multiplatform conversion, and three that are still in use.

These provide the "ZR

ARM: remove obsolete Makefile.boot infrastructure

There are a number of old Makefile.boot files that remain from the
multiplatform conversion, and three that are still in use.

These provide the "ZRELADDR", "PARAMS_PHYS" and "INITRD_PHYS" values
that are platform specific. It turns out that we can generally just
derive this from information that is available elsewhere:

- ZRELADDR is normally detected at runtime with the
CONFIG_AUTO_ZRELADDR flag, but also needed to be passed to
for 'make uImage'. In a multiplatform kernel, one always has
to pass this as the $(LOADADDR) variable, but in the StrongARM
kernels we can derive it from the sum of $(CONFIG_PHYS_OFFSET)
and $(TEXT_OFFSET) that are already known.

- PARAMS_PHYS and INITRD_PHYS are only used for bootpImage, which
in turn is only used for the pre-ATAGS 'param_struct' based boot
interface on StrongARM based machines with old boot loaders.
They can both be derived from CONFIG_PHYS_OFFSET and a machine
specific offset for the initrd, so all of the logic for these
can be part of arch/arm/boot/bootp/Makefile.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

ARM: sunplus: Add initial support for Sunplus SP7021 SoC

This patch aims to add an initial support for Sunplus SP7021 SoC.

Signed-off-by: Qin Jian <qinjian@cqplus1.com>
Reviewed-by: Arnd Bergmann <

ARM: sunplus: Add initial support for Sunplus SP7021 SoC

This patch aims to add an initial support for Sunplus SP7021 SoC.

Signed-off-by: Qin Jian <qinjian@cqplus1.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

ARM: hpe: Introduce the HPE GXP architecture

The GXP is the HPE BMC SoC that is used in the majority
of current generation HPE servers. Traditionally the asic will
last multiple generations of serve

ARM: hpe: Introduce the HPE GXP architecture

The GXP is the HPE BMC SoC that is used in the majority
of current generation HPE servers. Traditionally the asic will
last multiple generations of server before being replaced.

Info about SoC:

HPE GXP is the name of the HPE Soc. This SoC is used to implement many BMC
features at HPE. It supports ARMv7 architecture based on the Cortex A9
core. It is capable of using an AXI bus to whicha memory controller is
attached. It has multiple SPI interfaces to connect boot flash and BIOS
flash. It uses a 10/100/1000 MAC for network connectivity. It has multiple
i2c engines to drive connectivity with a host infrastructure. There
currently are no public specifications but this process is being worked.

Previously there was a requirement to reset the EHCI controller for the
asic to boot. This functionality has been moved to the u-boot
bootloader.

Signed-off-by: Nick Hawkins <nick.hawkins@hpe.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

kbuild: factor out the common installation code into scripts/install.sh

Many architectures have similar install.sh scripts.

The first half is really generic; it verifies that the kernel image
and S

kbuild: factor out the common installation code into scripts/install.sh

Many architectures have similar install.sh scripts.

The first half is really generic; it verifies that the kernel image
and System.map exist, then executes ~/bin/${INSTALLKERNEL} or
/sbin/${INSTALLKERNEL} if available.

The second half is kind of arch-specific; it copies the kernel image
and System.map to the destination, but the code is slightly different.

Factor out the generic part into scripts/install.sh.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <n.schier@avm.de>

show more ...